Flash and Active X will not work
I have Cox Media as a internet provider. McAfee as a antivirus. I have removed and reloaded Flash Player five times and can not get it to run. When going to add and remove programs there is no data for size of file. I also have turned down my security to bare minium and turned off popup blocker still nothing. What else can I do?
Hi, You need to provide your Operating system info, XP/SP? Browser(s) Installed and version number(s). Is your System a 64bit or 32bit?
Also have you had any viruses? If so, were they removed and by which Anti-Virus program?
Do you have any other Anti-Virus/Spyware program other than McAfee? If so, which?
Thanks,
eidnolb
Similar Messages
-
I own a 16GB iPhone 3G. My father passed it down to me a year ago after he got the iPhone 4. I pressed the sleep/wake button on the top of the iPhone to check the time, and as I did so, the screen flashed on and off and now the screen won't work. Whenever I put my simcard in there calls will go through but I am unable to hear them, but if I take it out calls don't go through. I've tried charging it for a while, connecting to my laptop, holding the sleep/wake button and the home button for 10seconds to restore it, but nothing works. I've looked around and no-one'ed seemed to have this problem. I'd like to know what is wrong with my iPhone ASAP. thanks.
First, update iTunes, then connect the phone to the computer and do a restore. This will also get your iOS up to date. Your phone should operate correctly after doing this, if not, you will most likely need to have the phone serviced or replaced.
-
So I just ordered my first Mac book Pro. I took it out of the box and hit the power button to do the start up and the screen will not work at all. I shut the computer off and back on again. I plugged it in and unplugged it. I've done everything I can think of and the screen still stays blank with no life at all
Is the battery charged? Press the little button on the left edge, near the front. If no green dots, no charge.
Does it charge? When you connect the MagSafe charger, does the pilot light on the plug light up?
Does it actually start? Should sound a chime after you press the power button on the top/right corner. If it chimes, does the Caps Lock pilot light when you press it?
If it starts and Caps Lock does flash on and off, have you tried pressing the screen brightness control for awhile? F2 turns up the brightness, may be turned fully down. -
Please help! Itunes fails to open on my macbook pro. I have removed itunes and reinstalled it and it still will not work!
Try removing the Genius database. In the "Finder" go to the /username/Music/iTunes/ folder and delete the "iTunes Library Genius.itdb" file. This may allow the program to launch again. This file will be recreated upon first use of the "Genius" feature.
-
I tried to update my iPhone 4s to the ios 6 and it wouldn't download and my phone will not work. I started the download and it said that it had 6 hours remaining, so i just left it overnight. The next morning it was working fine, but the ios 6 didn't download. I looked at it later and it had the turning on screen with the loading bar under it. It stayed like that for a while and the bar didn't move. I needed to use my phone so I tried to make it go to the home screen, but nothing happened. I held down the lock and home button for a few seconds and everything went black. I tried to turn it back on and all it has done all day is stayed on the turning on screen. I tried plugging it into the wall, and nothing happened. I tried connecting it to iTunes, and nothing happened. I don't know what I need to do to get it to work.
OMG is working OMG OMG OMG Thanks alot dude!
-
keep getting error message saying ipod detected but could not be identified properly - I have tried all the steps on the support page twice and it still will not work! I am running windows 8 (which it has worked with ok before) - struggling
I recently bought some new albums and can't play them on my ipodI just encountered the same problem on my 2 month old MBPro. I found a work around by changing USB ports. As for the actual cause or the reason why that worked, I dont know. The USB port I was using works fine with my phone or other USB devices.
-
Got a replacement Ipod Touch 3rd Generation and backed up to store version on computer and now it will not work. Goes into restore mode but cant restore. Any suggestions
What happens when you try to restore? Error message?
-
The message says the computer is not authorized. I deauthorized and reauthorized it and it still will not work. Should i delete the song and download it again?
Should i delete the song and download it again?
Yes ... if just one song on an album is doing that, it usually means you've got a damaged file on your hands. -
My google calendar will not load it says that is being redirected and will never complete. I have done what was requested and it still will not work?
Clear the cache and the cookies from sites that cause problems.
* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies"
See also:
* http://kb.mozillazine.org/The_page_is_not_redirecting_properly -
I have an iphone 4s and i keep getting an error message when ever i try to activate i have already restored the phone and it still will not work. any help would be greatly appreciated
Activation issues are almost always the result of a device that has been hacked or jailbroken. If that is the case, no support can be provided here.
-
My Macbook Pro keyboard and USB keyboard will not work. However, the trackpad and USB mouse will work. Any help?
This is quite frustrating, since it randomly occured as I was browsing the web. It seemed to happen out of nowhere. I cannot login to my user account because I cannot type my password.
Any help will be appreciated.
-MattIf you have another Mac, boot the non-working one into Target Disk Mode (holding down "T" at startup). Hook up the two Macs via a Firewire cable. The non-working one will mount on the other Mac as an external Firewire HD.
Next, download the 10.5.6 Combo update from here:
http://www.apple.com/downloads/macosx/apple/macosx_updates/macosx1056comboupdate .html
Run it. When it asks you for a destination, choose the other Mac that was mounted via Firewire. When it's done, unmount the computer and restart it. The keyboard and mouse should work now. -
Silverlight 5 WebBrowser Control - Is the SL5 WebBrowser control is set to work in IE7 mode only? I have a 3rd party web site I'm hosting and now they will not work with IE 7 Compatibility mode. Looks like this control can't detect I'm setup for IE 9. I'm
running IE 11 with registry hack for IE 9. I think the SL5 webbrowser control is set to work only in IE 7. can some one verify this or tell me how to set the WebBrowser control up to run either IE8, 9, 10 or 11? I have same issue with machines running IE 8
and above. This Silverlight 5 application is running out of browser with the elevated privileges (hack) and at test certificates install in proper stores. This application has been running for 2.5 years. Vender switch on some changes a couple days ago that
broke this application. Help!!Hi,
It seems there is nothing to do with IE mode.
Please make sure your link still can be accessed.
The WebBrowser displays HTML content in applications running in a Silverlight 4 or later out-of-browser applications or in Silverlight 5 in-browser trusted applications only.
For more infromation,please check link below:
http://msdn.microsoft.com/en-us/library/system.windows.controls.webbrowser(v=vs.95).aspx
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
I turned off the power to my apple tv whilst updating and now it will not work, i have tried to restore using usb but it says unable to find. any help please?
Welcome to the Apple Community.
Are you following these instructions.
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Source list, and then click Restore. -
I have an ipad1 and the wifi will not work. It is a wifi only model which makes it more interesting. When I go into settings, it says "no wifi". Does anyone have a solution to my problem? It is much appreciated.
If you are positive there is a good Wi-Fi signal in the area of the iPad I would first reboot your iPad. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider until the Apple logo appears. Let go of the buttons and let the iPad restart. See if that fixes your problem.
If that doesn't work, I would turn off your iPad and then restart your Wi-Fi router. Unplug the router for 30 seconds then plug it back in. Once the router had completed its restart process and established a link to the Internet then turn your iPad on. Make sure Settings > Wi-Fi> On. -
I have accidentially added a video to the photostream upload and now it will not work
I have accidentially added a video to the photostream upload and now it will not work, it would not let me delete the video from the upload file, so I have uninstalled icloud from PC and deleted all the folders. And started again, but still not working
You supply little pertinent about the MBP and the iPhone.
First... on the MBP... Click on the Apple icon.. Top left in Finder...
> About this Mac > Version...what does it say?
Which iPhone and what is its' iOS Version.
Maybe you are looking for
-
GUI_DOWNLOAD with Option of Binary Format
Hi Team, i have itab which contains 350 fields with length of 3500 characters( all field values) in each row. I need to Download data to Desktop in filename.XLS but for the FM we need to pass as 'BIN' format for GUI_DOWNLOAD or cl_gui_frontendservies
-
Vendor return 161 Depot reverse the duties
Dear Colleagues, I am doing Vendor returns for depot,Return PO>>MIGO (161)>>Credit memo to vendor,so far I haveremoved the stock from the system,but my concern is how to reverse the J1IG RG23D entries for the returned qtyies: If it is a vendor return
-
I use Xfce 4.4 and I hate its clipboard because I can't call the list of stored items with keys and because often I have to select manually even the last pasted entry... I'd like to have some info about how to replace it. Thanks
-
I have tried the Adobe DNG converter (v8.7.1.311) but when I choose the folder where the photos are, it shows an error reading "The source folder does not contain any supported camera raw files". I cannot find any other software for Mac which claims
-
CREATE TABLE [dbo].[S_Products] ( [Serial] [varchar] (15) COLLATE SQL_Latin1_General_CP1_CI_AS NULL , [ItemCode] [varchar] (10) COLLATE SQL_Latin1_General_CP1_CI_AS NULL , [Qty] [float] NULL // here serialno is unique but itemcode will occure 1 more