Flash and Silverlight freezing randomly

I have been facing this problem ever since I upgraded to Firefox 7. There doesn't seem to be a pattern as to when it happens, but periodically, when a new instance of Adobe Flash or Silverlight are started, they crash. For example, every 3-5 times watching something on Youtube, watching something on Netflix, or even just the annoying flash ads in Yahoo mail. When this happens, sometimes it grays out the control and offers to send a crash report (which I do almost every time), and sometimes I have to manually kill firefox via task manager. Also, when starting a Netflix movie, it might load a little bit (status bar isn't at any particular location, could be anywhere between 0-100%) but then halts. In any of these occasions, Firefox completely freezes. I do in fact have Flash and everything up to date. Problem has been around for months now and it keeps getting more and more annoying.
I am more than familiar with computers, developer in fact. I do also have Visual Studio 2010 installed, in case that might contribute to the problem.

Silverlight is not required in Firefox. However Flash works on Mozilla Firefox. Update your Firefox Plug-ins by going here
https://www.mozilla.com/en-US/plugincheck/
Update the Plug-ins infront of whom "Update" button is active. Check and tell if its working.

Similar Messages

Safari - Flash and Silverlight Plug-ins NOT working

Safari does not seem to recognize my Flash and Silverlight Plug-ins so that I can watch and stream videos. I might have messed it up, but I can not fix it. Any help is appreciated. Thanks!

There's no Auval or RA or Garritan Personal Orchestra in the Audio Units Manager in Logic Pro. Though Stylus RMX that I also use and Kontakt Player 2 are there and successfully validated. The RA and Kontakt Player component are exactly in the place you said they would be.
I've since discovered that RA does not in fact work in Logic Express. As for whether it's loading up in Rosetta or PPC version - how do I tell that?
I really appreciate your help but I'm still stuck at square 1. Any more suggestions?!!

Keyboard and mouse freeze randomly

My keyboard and mouse freeze up for 2-4 seconds at seemingly random intervals. I could go for a couple hours without it happening, or like now, it has happened twice while writing this. If I'm typing something when it freezes, nothing I type while it's frozen ends up showing up, but if I had hit a key right when it froze, it will repeat itself until I press something else after it unfreezes. They keyboard and mouse both freeze at the same time, it's not one or the other. It has nothing to do with standby like the topic below...it can happen right after I boot up or anytime thereafter.
My hardware is an eMachines M6805 laptop (upgraded to 2GB of RAM) and just a basic Dell USB mouse and keyboard.
I tried searching the forums, but the search box on here searches the entire web for some reason even if I tell it to search TechNet, so I apologize if this has already been answered.

I just had my Desktop freeze whilst I was using Media Player minimised to the taskbar.
I came back to my PC and couldn't use the keyboard or mouse. I plugged in a wired USB mouse and this did not work either. I then used the mouse and keyboard buttons on my MCE remote and still nothing happened, actually something happened as my hard drive
became very busy, but there was nothing happening on screen. I had to reboot to get back to normal operation.
I use a Logitech Bluetooth MX500 keyboard and mouse and have been having problems since I had Windows 7, but thought it was the keyboard and mouse at fault. This is the first time that I have encountered this problem, but I have had problems with the keys
sticking, very annoying when you're in Visual Studio and it goes and deletes a load of code for you because the backspace key was the one that stuck. The cursor also randomly jumps lines occasionally and inserts text where I don't want it. This wouldn't be
such an issue if I was a touch typist and could look at the screen whilst typing, but I am not and only realise the errors when I have finished typing.
Anyway, Mine is a custom built PC(all drivers and windows fully up to date) which ran XP with zero problems:
Gigabyte mboard and graphics card (Nvidia) with I5 processor and 4GB ram.
If this was a USB hub Powersave issue, then I would still expect the hub to wake up when a new device was pugged in, so I'm going to count that fix out.
I'm not sure that the freezing was a mouse/keyboard fault, I suspect that this is more a video driver fault as the computer did become very busy doing something when I used the MCE remote, it's just the screen didn't update to show what it was doing.
I should have looked at the taskbar clock to see if the time had updated, I'll do that next time if it happens again.
I've disabled the Power Save options for the hub that controls the mouse and keyboard, perhaps this will stop the keys sticking and jumping around when I'm typing in Visual Studio.
Mick Doherty
http://dotnetrix.co.uk
http://glassui.codeplex.com

Re: Tecra S10 and S11 freeze randomly

We have several Tecra S10's and S11's. They freeze randomly during the day. Some even twice within half an hour, others spread it out through the day.
The Tecra's are all Windows 7. Some have 64 bit, others a 32 bit installation. After the Windows 7 installation we removed additional software we don't need, like McAfee, Toshiba goodies (Assist, Tempro, etc), Ebay, etc. After that we activatie Office 2007 and we Microsoft-update the the laptops. So far so good.
However, after a week or two just simply working in Word causes the Tecra to freeze. Even ctrl+alt+del is not working. The Tecra has to be forced to shut off by holding the power button down.
Does anybody recognize these 'frozen moments'. It's very anoying.

> All notebooks are in an Active Directory domain Windows 2008.
Thats the reason why I asked if notebooks are connected to some company LAN.
I saw somewhere on this forum that similar issues were noticed in the same situation. Notebook was somehow blocked when was part of domain.
Probably some data exchange between notebook and server was responsible for this blocking and freezing issue.
I really don't know what to say. If you have several notebooks with the same problem I recommend you to contact nearest authorized Toshiba service provider and ask for help. You know they have contact with Toshiba people and if there is something serious they can help you with this.
I really don't believe some long discussion here will help you much.
If your local administrator cannot find out what the problem can be than you need professional help.
Do you agree with me?

Flash and silverlight causing high temps on macbook air

Hello all,
I've had my macbook air for just over 2 weeks and I've noticed that when I play flash videos on youtube and silverlight videos via netflix my fan starts going crazy after a while. I can do other intensive tasks without the fan having to spin up.
Any suggestions?

Your computer is doing what it is supposed to do. There are few applications that are as CPU intensive as Flash - this is why Jobs didn't want it on the iPad or iPhone. Flash makes the computer work hard, the computer gets hot, and the fans start up.

ADOBE FLASH and Silverlight

accidentally deleted adobe flash player and silverlight plug in. Netflix and videos on Facebook will no longer load. I reinstalled both but it's like nothing happened neither one work. what's the issue?

If you're sure you've installed the latest version of Flash, take each of the following steps that you haven't already tried. After each step, relaunch Safari and test. For a "missing plug-in" error, start with Step 8. Back up all data before making any changes.
Step 1
You might have to log out or restart the computer before a Flash update takes effect.
Step 2
From the Safari menu bar, select
Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data...
and confirm. Close the window. Then select
 ▹ System Preferences… ▹ Flash Player ▹ Advanced
and click Delete All. Close the preference pane.
Step 3
If you're only having trouble with YouTube videos, log in to YouTube and load this page. You may see a link with the text "Leave the HTML5 Trial." If so, click that link.
Step 4
If you get a warning of a "blocked" or "outdated" plug-in, then from the menu bar select
 ▹ System Preferences… ▹ Flash Player ▹ Advanced
and click Check Now. Quit and relaunch the browser.
If the warning persists, triple-click anywhere in the line below on this page to select it:
/System/Library/CoreServices/CoreTypes.bundle/Contents/Resources
Right-click or control-click the highlighted text and select
Services ▹ Open
from the contextual menu.* A folder should open. Inside it, there should be a file named "XProtect.meta.plist". If that file is missing and you know why it's missing, restore it from a backup or copy it from another Mac running the same version of OS X. Otherwise, reinstall OS X.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
Step 5
In the Safari preferences window, select the Advanced tab and uncheck the box marked
Stop plug-ins to save power
Step 6
Open this folder as in Step 4:
/Library/Internet Plug-Ins
Delete the following item, or anything with a similar name, if present:
Flash Player (failing).plugin
You may be prompted for your login password.
Step 7
Re-download and reinstall Flash. Download it from the domain "get.adobe.com". Don't click a link from any other website, including this one, because you can't trust links. They may be an attempt to trick you into installing malware masquerading as Flash. Type the address into the browser window. Never download a Flash update from anywhere else.
Step 8
If you get a "missing plug-in" error, select
Safari ▹ Preferences... ▹ Security
from the Safari menu bar and check the box marked
Allow (or Enable) plug-ins
Then click the button marked
Manage Website Settings...
if present and make sure that the website is not blocked for Flash.
Step 9
Select
Safari ▹ Preferences... ▹ Extensions
from the Safari menu bar. If any extensions are installed, disable them.

Safari Flash and Silverlight problem.

I have two large problems on safari.
1. Flash: Whenever I play flash, the CPU jumps up to 100+, and then it doesn't come down until I close down the video.
I have everything updated, and this didn't occur when I first got my macbook. Does anyone have a fix for this?
2. Silverlight: I installed silverlight, but silverlight videos don't recognize them on any of my browsers. However, on "Help ----> Installed Plugins", it does show the silverlight plugin installed, but the videos just don't load. I've already uninstalled and then reinstalled, and tried Silverlight 2 Beta 2, and Silverlight 1, but neither of them work. Please help!

These are the downloads and the settings you need in order to view/hear pretty much everything that the net can throw at you: The setup described below has proved repeatedly successful on both PPC and Intel macs, but nothing in life carries a guarantee!
It is known to work in the great majority of cases with Safari 3.0.4, 3.1, 3.1.2, QT 7.3, 7.4.x and 7.5 and OS 10.4.11, and should also work with 10.5.4.
Download and install (or re-install even if you already had them) the latest versions, suitable for your flavor of Mac, of:
RealPlayer 11 (which is no longer in beta) for Mac from:
http://www.versiontracker.com/dyn/moreinfo/macosx/15540
Flip4Mac WMV Player from http://www.microsoft.com/windows/windowsmedia/player/wmcomponents.mspx (Windows Media Player for the Mac is no longer supported, even by Microsoft)
Perian from http://perian.org/
You should read this support page http://perian.org/#support in case you need to delete older codecs.
The latest version of Adobe FlashPlayer can be obtained from here:
http://www.adobe.com/shockwave/download/download.cgi?P1ProdVersion=ShockwaveFlash
(You can check here: http://www.adobe.com/products/flash/about/ to see which version you should install for your Mac and OS.
Note that Adobe requires you to uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_14157
and also that you follow the instructions closely, such as closing ALL applications first.
Some users have mentioned that the latest Flash Player versions (v.9.0.115.0 and 9.0.124.0) in some cases conflict with Leopard 10.5.4, and that they have needed to revert to v. 9.0.47. This can be downloaded from here:
http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_14266&sliceId=1
You should also ensure that you have downloaded and installed all the correct versions for your Mac of Security Updates up to and including 2008-005. (N.B. Security Updates require both a restart and a permission repair.)
In Macintosh HD/Library/Quicktime/ delete any files relating to DivX (Perian already has them). However it should be noted that Perian is not an internet plugin and will not play DivX files imbedded on a website. For that you will need the DivX Player browser plugin available from http://www.divx.com/divx/mac/
Now go to Safari Preferences/Security, and tick the boxes under Web Content (all 4 of them) to enable Java.
Lastly open Audio Midi Setup (which you will find in the Utilities Folder of your Applications Folder) and click on Audio Devices. Make sure that both Audio Input and Audio Output, under Format, are set to 44100 Hz, and that you have selected 'Built in Audio'.
Important: Now repair permissions and restart.
You should also consider having the free VLC Player from http://www.videolan.org/ in your armory, as this plays almost anything that DVD Player might not.
There is an additional 'fix' you could try if you are having problems with Flash and Quicktime, depending on which type of Mac you have:
On Intel Macs, make sure that you are not running Safari in Rosetta. You can check this, and change it, in the Get Info window.
On PPC Macs, go to the Hard Disk/Library/Internet Plug-Ins folder, and drag the file 'QuickTime Plugin.webplugin' to the desktop. Quit and restart Safari. If things have improved you can trash that file. If they haven't put it back, as the lack of this plug-in can cause QT content in some widgets to cease functioning.
And now there is an additional kid on the block: SilverLight. Microsoft has created their own version of what a replacement for Flash should be. You can read more about it here:
http://silverlight.net/
So, if you go to any sites that have been designed for this new Silverlight stuff, you can download the plug-in from here (but make certain that you are downloading SilverLight v.1.0 for OS X (10.4.8 upwards):
http://silverlight.net/GetStarted/
Recommendation: Close all applications before installing any of the above, repair permissions, reboot, and repair permissions again.

Flash and Silverlight don't work at all in Beta 34.0, when Internet Explorer properly works with these; happened immediately with update to Beta 34.0.

Hello!
Immediately upon updating to Beta 34.0, Silverlight and Flash, completely stopped working in Firefox. I am running Vista Home Premium, Service Pack 2.
They work fine in Internet Explorer.
This happens in any website I go to.
For example, I can go to Youtube, and the page will show a black box where the video should be, but there are no play controls, or any way to enable the video. Clicking within the black box does nothing.
On the music play site, Grooveshark, the site does not recognize Flash as being installed at all. (If you don't have Flash installed, this site pops up a message every time. Grooveshark correctly recognizes that Internet Explorer has Flash installed.)
I updated the Flash plugin to the current version, which also did nothing.
I have not reinstalled Firefox, or done a System Restore, yet.
I just bought a new computer that I was going to migrate to, and retire this computer, so I was not going to do heroic efforts to fix this. I was reporting this more on the order of a bug report.
Thanks.
Karl

This happened to me as well with Windows 7 32 bit (which I did as as upgrade from Vista Home Premium - if that might foul things up a bit) and affects Firefox 34.1 and IE. I did a system restore which took me back to Firefox 33 and Flash was fine. Later in the day Firefox updated back to 34.1 and I lost Flash again.

Why am I getting a "QT PLAYER" logo on media files I used to be able to play with Flash and Silverlight?

When I try to download a video file I am getting a "QT PLAYER" logo and it wont allow me to open in Quicktime mor any other media player. Why is this happening? I think it happened after I tried to download plug-ins for Elmedia player? thanks

I dont need you to respond but I found out the answer and I thought I might share it so that if anyone else has the same problem you will know the answer. This what I did before the problem started:
1. I am running MAC OSX 10.8.2 (Mountain Lion)
2. I down/loaded (d/l) ADOBE FLASH player
3. I d/l Adobe AIR SKX including SHOCKWAVE (thought that MORE is better!)
4. Saw that SAFARI had some NEW EXTENSIONS so D/L a few including:
    -Adware Blocker
    -Facebook Ad blocker
   - Facebook page cleanup
   - "CLICK-TO- FLASH blocker (this is the culprit!)
"ClickToFlash prevents the Flash plug-in from running. It replaces any Flash element on a webpage with a placeholder; simply click the placeholder to load the Flash content. ClickToFlash also lets you replace Flash videos from select websites (such as YouTube) with H.264 video. Other optional features include advanced whitelisting". Quote from Safari extensions page.
and a few other unimportant ones in my opinion.
REMEDY:
1. I checked everything about SILVERLIGHT as was suggested and UNINSTALLED SILVERLIGHT.
    WENT TO UTILITIES IN APPLICATIONS AND IN SPOTLIGHT WROTE "SILVERLIGHT" and then "MOVED TO TRASH" anything to do with
    Silverlight
2. did the same for ADOBE FLASHPLAYER and Went to UTILITIES and removed anything to do with Adobe, including the LOCKED ADOBE FILES
    AIR, SHOCKWAVE, AND A PLUG-IN CALLED "DIRECTOR.SHOCKWAVE"
3. THEN UNINSTALLED ALL THE SAFARI EXTENSIONS - especially the "CLICK To FLASH extension.
4. Went to SAFARI PREFERENCES, and under the SECURITY TAB made sure "enable plug-ins" was checked.
THEN:
1. RE-INSTALL SILVERLIGHT
RESTART
2.RE-INSTALL ADOBE FLASH PLAYER (LATEST) 11.2.502.146 here;
http://get2.adobe.com/flashplayer/
RE-START
AND THIS SOLVED THE PROBLEM. NOW WORKING PERFECTLY
MANY THANKS
ED

Flash and Silverlight suddenly not working?!

Hi,
This evening I went to check the football on skygo. Where the stream would usually load, I was presented with this...
Silverlight on grey background and no video.
I then went to the BBC website and clicked on the football latest and it showed me this...
Flash on grey background and no video
I 'right clicked' the main video window and it gave me the option to 'restore flash'. I clicked this and was then confronted with this...
HTML5 text across video window. I could still click play and it refreshed itself and then played normally, but upon re-entering the page the same happened again.
Does anyone know why I am suddenly having problems with various video formats? I've done nothing different to normal whatsoever and although flash seems to be working (albeit a bit strangely), silverlight it not, so nogo-skygo!
I'm hoping this will be riculously obvious to someone and they will call me an idiot and tell me what needs installing/uninstalling/reinstalling/molesting/fingering to get me back to the smooth operation i've enjoyed for the last 5 years.
I'm running:
Macbook Pro
Mountain lion 10.8.4
Gracias amigos...

Try this for Flash ...
Open System Preferences > Flash Player then select the Advanced tab.
Click Delete All under Browsing Data and Settings
Back to Safari. Press Command + Option + E to empty the Safari cache.
Quit and relaunch Safari to test.
If that didn't help, please post a link in your Reply.
Message was edited by: CS

Flash and Silverlight

Ive got a macbook air, 15 months old, for some reason i now cant run content that requires silverlight or flash despite downloading all the required software to make it work, no idea why this has suddenly happened, but nothing will run anymore, any help appreciated.

Open Safari. Go to Safari>Preferences>Security. Is enable plug-ins checked? Also try to reset Safari by going to Safari>Reset Safari....

Can't watch videos or see apps that use flash, or silverlight

I just got this iPod Touch today, why can't i watch or see anything that uses flash, or silverlight
Is there anyway to watch or see flash, and silverlight using iPod Touch?
Thanks!

Because no iDevices support Flash or Silverlight, There is the SkyFire browser that displays/converts Flash on a special site. For more info on Flash look at the previous posts on the right under the hading "More Like This" Also see:
thoughts on flash - Google Search

Keyboard and trackpad freeze and randomly become unresponsive

I've got a MacBook Pro (15-inch Early 2011) running Mac OS X 10.8.2.
Since a few weeks ago at random intervals my keyboard and trackpad become permanently unresponsive. I don't recall any particular cause or change that would have caused this to start happening.
What happens is that the trackpad and keyboard will stop functioning completely. The computer, display etc. would continue to function properly:
The clock keeps ticking.
If music were playing it would continue etc.
Internet connectivity (via an ethernet cable or WiFi) continues to work as well (a download will continue, and even resume if I disconnect and reconnect the ethernet cable).
Presssing the power button will bring up the shutdown dialog as usual (but I can't use it, obviously, so a forced shutdown needs to be performed instead by holding down the power button longer).
.. but the keyboard and trackpad are rendered inoperable, as if they were no longer connected.
I've made no progress in finding out what could possibly be the cause of this. A few observations:
It has never happened while not using the keyboard (e.g. watch a DVD with TV series for a few hours, and afterwards the keyboard would always be fine).
It always happens while actively typing (e.g. while in the middle of replying to an e-mail).
It is not a temporary problem, the keyboard and trackpad will not become responsive again after some time (the computer isn't particulary occupied with calculating something big, no beachball and no busy mechanical noises).
It does not happen progessively. It works fine and snappy one second, and I'm touching a dead keyboard a split second later.
I tried connecting a USB keyboard but that doesn't seem to work either (I'm mentioning this since some of the linked threads below close with that as a solution).
Possibly related (although I haven't found anything in these threads):
Keyboard causes trackpad to not function properly
Keyboard and trackpack freeze
Keyboard and Trackpad Unresponsive
MacBook Pro Keyboard & TrackPad freeze! Totally Unresponsive!
MacBook Pro inbuilt Keyboard and Trackpad freeze when not connected to bluetooth devices?
I've crawled through some log files in /var/log (via the shell and through Console.app) and found a couple things that may be relevant, although they seem unrelated. Etiher way, I was surprised by what I found. All sorts of errors with regards to Bluetooth and USB stuff. I'm not aware of using either. I haven't used bluetooth in years and though I sometimes charge an iPod by USB, I haven't had any problems with that, and this keyboard/trackpad freeze has also happened on sessions where I started the laptop and never even touch the USB ports in the time leading up to the freeze.
Sample log from when it happened. It last happened at 21:04:xx:
Jan 14 20:18:39 KrinkleMac.local com.apple.usbmuxd[34]: _handle_timer heartbeat detected detach for device 0x141-192.168.178.13:0!
Jan 14 20:23:49 KrinkleMac.local lsboxd[2155]: @AE relay 4755524c:4755524c
Jan 14 20:26:14 KrinkleMac.local com.apple.usbmuxd[34]: _handle_timer heartbeat detected detach for device 0x142-192.168.178.13:0!
Jan 14 20:29:11 KrinkleMac.local WindowServer[80]: CGXSetWindowBackgroundBlurRadius: Invalid window 0xffffffff
Jan 14 20:29:16 KrinkleMac.local lsboxd[2155]: @AE relay 4755524c:4755524c
Jan 14 20:30:13 KrinkleMac.local CalendarAgent[6449]: Unexpected EOF, returning last token as fallback
Jan 14 20:30:43 --- last message repeated 1 time ---
Jan 14 20:33:24 KrinkleMac.local com.apple.usbmuxd[34]: _handle_timer heartbeat detected detach for device 0x143-192.168.178.13:0!
Jan 14 20:41:09 KrinkleMac.local com.apple.usbmuxd[34]: _handle_timer heartbeat detected detach for device 0x144-192.168.178.13:0!
Jan 14 20:42:43 KrinkleMac.local mtmd[46]: Set snapshot time: 2013-01-14 20:42:45 +0100 (current time: 2013-01-14 20:42:43 +0100)
Jan 14 20:42:43 KrinkleMac kernel[0]: nspace-handler-set-snapshot-time: 1358192565
Jan 14 20:43:14 --- last message repeated 10 times ---
Jan 14 20:43:28 KrinkleMac.local AddressBookSourceSync[6580]: *** -[IADomainCache init]: IA domains cache is out of date.
Jan 14 20:45:12 KrinkleMac.local CalendarAgent[6449]: Unexpected EOF, returning last token as fallback
Jan 14 20:48:09 KrinkleMac.local com.apple.usbmuxd[34]: _handle_timer heartbeat detected detach for device 0x145-192.168.178.13:0!
Jan 14 20:55:54 KrinkleMac.local com.apple.usbmuxd[34]: _handle_timer heartbeat detected detach for device 0x146-192.168.178.13:0!
Jan 14 21:01:13 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe
Jan 14 21:01:13 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x821A FirmwareVersion - 0x0041
Jan 14 21:01:13 KrinkleMac kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
Jan 14 21:01:13 KrinkleMac kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
Jan 14 21:01:13 KrinkleMac kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
Jan 14 21:01:13 KrinkleMac kernel[0]: [AppleBluetoothHCIControllerUSBTransport][ClearFeatureInterruptEndpointHalt] -- ClearPipeStall returned e000404f
Jan 14 21:01:13 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe
Jan 14 21:01:13 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x821A FirmwareVersion - 0x0041
Jan 14 21:01:13 KrinkleMac kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
Jan 14 21:01:13 KrinkleMac kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
Jan 14 21:01:13 KrinkleMac.local blued[6615]: kBTXPCUpdateUserPreferences gConsoleUserUID = 501
Jan 14 21:01:14 KrinkleMac kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
Jan 14 21:01:39 KrinkleMac kernel[0]: USBF:          145183.427          AppleUSBHubPort[0xffffff803c3d2600]::FatalError - Port 3 of Hub at 0xfa110000 reported error 0xe00002c0 while doing clearing port feature (1)
Jan 14 21:01:39 KrinkleMac kernel[0]: USBF:          145183.722          IOUSBCompositeDriver[0xffffff803ae3be00](CompositeDevice) GetFullConfigDescriptor(0) returned NULL
Jan 14 21:01:41 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe
Jan 14 21:01:41 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x821A FirmwareVersion - 0x0041
Jan 14 21:01:41 KrinkleMac kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
Jan 14 21:01:41 KrinkleMac kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
Jan 14 21:01:41 KrinkleMac kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
Jan 14 21:01:59 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe
Jan 14 21:01:59 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x821A FirmwareVersion - 0x0041
Jan 14 21:01:59 KrinkleMac kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
Jan 14 21:01:59 KrinkleMac kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
Jan 14 21:01:59 KrinkleMac kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
Jan 14 21:02:02 KrinkleMac kernel[0]: USBF:          145206.333          AppleUSBHub[0xffffff80476a9000]::ConfigureHub(hub @ 0xfa110000) No config descriptor, retrying
Jan 14 21:02:02 KrinkleMac kernel[0]: USBF:          145206.634          AppleUSBHub[0xffffff80476a9000]::ConfigureHub(hub @ 0xfa110000) No config descriptor, after retry, resetting the port (1)
Jan 14 21:02:12 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe
Jan 14 21:02:12 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x821A FirmwareVersion - 0x0041
Jan 14 21:02:12 KrinkleMac kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
Jan 14 21:02:12 KrinkleMac kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
Jan 14 21:02:12 KrinkleMac kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
Jan 14 21:02:12 KrinkleMac kernel[0]: [AppleBluetoothHCIControllerUSBTransport][ClearFeatureInterruptEndpointHalt] -- ClearPipeStall returned e000404f
Jan 14 21:02:12 KrinkleMac kernel[0]: USBF:          145216.648          AppleUSBHubPort[0xffffff803a385000]::FatalError - Port 1 of Hub at 0xfa110000 reported error 0xe000404f while doing get status (first in port status change)
Jan 14 21:02:12 KrinkleMac kernel[0]: USBF:          145216.649          AppleUSBHubPort[0xffffff8038a3ba00]::FatalError - Port 2 of Hub at 0xfa110000 reported error 0xe00002c0 while doing clearing port feature (1)
Jan 14 21:02:13 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe
Jan 14 21:02:13 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x821A FirmwareVersion - 0x0041
Jan 14 21:02:13 KrinkleMac kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
Jan 14 21:02:13 KrinkleMac kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
Jan 14 21:02:13 KrinkleMac kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
Jan 14 21:02:13 KrinkleMac kernel[0]: [AppleBluetoothHCIControllerUSBTransport][ClearFeatureInterruptEndpointHalt] -- ClearPipeStall returned e000404f
Jan 14 21:02:13 KrinkleMac kernel[0]: E:[AppleBluetoothHCIControllerUSBTransport]WARNING !!!! [AppleBluetoothHCIControllerUSBTransport::DeviceRequestCompleteHandler] error 0xe00002ed (kIOReturnNotResponding)
Jan 14 21:02:13 KrinkleMac kernel[0]: USBF:          145217.575          AppleUSBHubPort[0xffffff80398bf400]::FatalError - Port 2 of Hub at 0xfa110000 reported error 0xe00002c0 while doing get status (first in port status change)
Jan 14 21:02:15 KrinkleMac kernel[0]: USBF:          145219.525          AppleUSBHubPort[0xffffff8039e80800]::FatalError - Port 2 of Hub at 0xfa110000 reported error 0xe000404f while doing getting port status (2)
Jan 14 21:02:15 KrinkleMac kernel[0]: USBF:          145219.525          AppleUSBHubPort[0xffffff8038c87e00]::FatalError - Port 1 of Hub at 0xfa110000 reported error 0xe00002ed while doing getting port status (2)
Jan 14 21:02:15 KrinkleMac kernel[0]: USBF:          145219.525          AppleUSBHubPort[0xffffff803a123000]::FatalError - Port 3 of Hub at 0xfa110000 reported error 0xe000404f while doing getting port status (2)
Jan 14 21:02:15 KrinkleMac kernel[0]: USBF:          145219.529          AppleUSBHubPort[0xffffff8039e80800]::FatalError - Port 2 of Hub at 0xfa110000 reported error 0xe00002ed while doing get status (first in port status change)
Jan 14 21:02:15 KrinkleMac kernel[0]: USBF:          145219.530          AppleUSBHubPort[0xffffff8038c87e00]::FatalError - Port 1 of Hub at 0xfa110000 reported error 0xe00002ed while doing get status (first in port status change)
Jan 14 21:02:15 KrinkleMac kernel[0]: USBF:          145219.530          AppleUSBHubPort[0xffffff803a123000]::FatalError - Port 3 of Hub at 0xfa110000 reported error 0xe000404f while doing get status (first in port status change)
Jan 14 21:02:16 KrinkleMac kernel[0]: USBF:          145221.123          AppleUSBHubPort[0xffffff803a123000]::FatalError - Port 1 of Hub at 0xfa110000 reported error 0xe00002c0 while doing clearing port feature (1)
Jan 14 21:02:16 KrinkleMac kernel[0]: USBF:          145221.123          AppleUSBHubPort[0xffffff8039e80800]::FatalError - Port 2 of Hub at 0xfa110000 reported error 0xe00002c0 while doing clearing port feature (1)
Jan 14 21:02:16 KrinkleMac kernel[0]: USBF:          145221.125          AppleUSBHubPort[0xffffff8038c87e00]::FatalError - Port 3 of Hub at 0xfa110000 reported error 0xe00002c0 while doing get status (first in port status change)
Jan 14 21:02:22 KrinkleMac kernel[0]: USBF:          145226.307          AppleUSBHubPort[0xffffff803a123000]::FatalError - Port 3 of Hub at 0xfa110000 reported error 0xe00002c0 while doing clearing port feature (1)
Jan 14 21:02:22 KrinkleMac kernel[0]: USBF:          145226.373          AppleUSBHubPort[0xffffff8038c87e00]::FatalError - Port 1 of Hub at 0xfa110000 reported error 0xe00002c0 while doing get status (first in port status change)
Jan 14 21:02:23 KrinkleMac kernel[0]: USBF:          145228.196          AppleUSBHubPort[0xffffff8039fd0c00]::FatalError - Port 2 of Hub at 0xfa110000 reported error 0xe000404f while doing getting port status (2)
Jan 14 21:02:23 KrinkleMac kernel[0]: USBF:          145228.196          USBF:          145228.196          AppleUSBHubPort[0xffffff803a261e00]::FatalError - Port 1 of Hub at 0xfa110000 reported error 0xe00002ed while doing getting port status (2)AppleUSBHubPort[0xffffff803a123000]::FatalError - Port 3 of Hub at 0xfa110000 reported error 0xe000404f while doing getting port status (2)
Jan 14 21:02:23 KrinkleMac kernel[0]: USBF:          145228.200          AppleUSBHubPort[0xffffff803a261e00]::FatalError - Port 1 of Hub at 0xfa110000 reported error 0xe00002ed while doing get status (first in port status change)
Jan 14 21:02:23 KrinkleMac kernel[0]: USBF:          145228.200          AppleUSBHubPort[0xffffff803a123000]::FatalError - Port 3 of Hub at 0xfa110000 reported error 0xe000404f while doing get status (first in port status change)
Jan 14 21:02:23 KrinkleMac kernel[0]: USBF:          145228.200          AppleUSBHubPort[0xffffff8039fd0c00]::FatalError - Port 2 of Hub at 0xfa110000 reported error 0xe00002ed while doing get status (first in port status change)
Jan 14 21:02:25 KrinkleMac kernel[0]: USBF:          145229.331          [0xffffff8038559600] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 1 of Hub at 0xfa100000)
Jan 14 21:02:25 KrinkleMac kernel[0]: USBF:          145229.766          [0xffffff8038559600] The IOUSBFamily was not able to enumerate a device.
Jan 14 21:02:26 KrinkleMac kernel[0]: USBF:          145230.963          [0xffffff8038559600] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 1 of Hub at 0xfa100000)
Jan 14 21:02:26 KrinkleMac kernel[0]: USBF:          145230.963          [0xffffff8038559600] The IOUSBFamily was not able to enumerate a device.
Jan 14 21:02:28 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe
Jan 14 21:02:28 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x821A FirmwareVersion - 0x0041
Jan 14 21:02:28 KrinkleMac kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
Jan 14 21:02:28 KrinkleMac kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
Jan 14 21:02:28 KrinkleMac kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
Jan 14 21:02:38 KrinkleMac kernel[0]: USBF:          145242.843          AppleUSBHub[0xffffff803c64b000]::ConfigureHub(hub @ 0xfa110000) No config descriptor, retrying
Jan 14 21:02:38 KrinkleMac kernel[0]: USBF:          145243.145          AppleUSBHub[0xffffff803c64b000]::ConfigureHub(hub @ 0xfa110000) No config descriptor, after retry, resetting the port (1)
Jan 14 21:02:40 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe
Jan 14 21:02:40 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x821A FirmwareVersion - 0x0041
Jan 14 21:02:40 KrinkleMac kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
Jan 14 21:02:40 KrinkleMac kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
Jan 14 21:02:40 KrinkleMac kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
Jan 14 21:02:47 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe
Jan 14 21:02:47 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x821A FirmwareVersion - 0x0041
Jan 14 21:02:47 KrinkleMac kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
Jan 14 21:02:47 KrinkleMac kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
Jan 14 21:02:47 KrinkleMac kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
Jan 14 21:02:54 KrinkleMac.local com.apple.usbmuxd[34]: _handle_timer heartbeat detected detach for device 0x147-192.168.178.13:0!
Jan 14 21:03:03 KrinkleMac kernel[0]: BRCM2070 Hub::terminate(kIOServiceSynchronous) timeout
Jan 14 21:03:04 KrinkleMac kernel[0]: USBF:          145268.325          AppleUSBHubPort[0xffffff8039bc4c00]::FatalError - Port 3 of Hub at 0xfa110000 reported error 0xe00002c0 while doing get status (first in port status change)
Jan 14 21:03:20 KrinkleMac kernel[0]: USBF:          145285.139          [0xffffff8038559600] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 1 of Hub at 0xfa100000)
Jan 14 21:03:21 KrinkleMac kernel[0]: USBF:          145285.572          [0xffffff8038559600] The IOUSBFamily was not able to enumerate a device.
Jan 14 21:03:22 KrinkleMac kernel[0]: USBF:          145286.868          [0xffffff8038559600] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 1 of Hub at 0xfa100000)
Jan 14 21:03:23 KrinkleMac kernel[0]: USBF:          145288.132          [0xffffff8038559600] The IOUSBFamily was not able to enumerate a device.
Jan 14 21:03:24 KrinkleMac kernel[0]: USBF:          145288.882          [0xffffff8038559600] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 1 of Hub at 0xfa100000)
Jan 14 21:03:25 KrinkleMac kernel[0]: USBF:          145289.385          [0xffffff8038559600] The IOUSBFamily was not able to enumerate a device.
Jan 14 21:04:05 KrinkleMac kernel[0]: USBF:          145329.455          AppleUSBHubPort[0xffffff803a24e400]::FatalError - Port 1 of Hub at 0xfa110000 reported error 0xe00002c0 while doing clearing port feature (1)
Jan 14 21:04:05 KrinkleMac kernel[0]: USBF:          145329.456          AppleUSBHubPort[0xffffff8038a96200]::FatalError - Port 2 of Hub at 0xfa110000 reported error 0xe00002c0 while doing clearing port feature (1)
Jan 14 21:04:05 KrinkleMac kernel[0]: USBF:          145329.492          AppleUSBHubPort[0xffffff803a9a6600]::FatalError - Port 3 of Hub at 0xfa110000 reported error 0xe00002c0 while doing get status (first in port status change)
Jan 14 21:04:06 KrinkleMac kernel[0]: USBF:          145330.483          AppleUSBHubPort[0xffffff803a24e400]::FatalError - Port 3 of Hub at 0xfa110000 reported error 0xe00002c0 while doing get status (first in port status change)
Jan 14 21:04:06 KrinkleMac kernel[0]: USBF:          145330.703          IOUSBCompositeDriver[0xffffff803b7c3700](CompositeDevice) GetFullConfigDescriptor(0) returned NULL
Jan 14 21:04:06 KrinkleMac kernel[0]: USBF:          145330.703          IOUSBCompositeDriver[0xffffff803c98b400](CompositeDevice) GetFullConfigDescriptor(0) returned NULL
Jan 14 21:04:09 KrinkleMac kernel[0]: USBF:          145333.634          [0xffffff8038559600] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 1 of Hub at 0xfa100000)
Jan 14 21:04:09 KrinkleMac kernel[0]: USBF:          145334. 67          [0xffffff8038559600] The IOUSBFamily was not able to enumerate a device.
Jan 14 21:04:10 KrinkleMac kernel[0]: USBF:          145334.916          [0xffffff8038559600] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 1 of Hub at 0xfa100000)
Jan 14 21:04:10 KrinkleMac kernel[0]: USBF:          145335.347          [0xffffff8038559600] The IOUSBFamily was not able to enumerate a device.
Jan 14 21:04:16 KrinkleMac kernel[0]: USBF:          145340.675          [0xffffff8038559600] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 1 of Hub at 0xfa100000)
Jan 14 21:04:16 KrinkleMac kernel[0]: USBF:          145341.108          [0xffffff8038559600] The IOUSBFamily was not able to enumerate a device.
Jan 14 21:04:18 KrinkleMac kernel[0]: USBF:          145343.300          [0xffffff8038559600] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 1 of Hub at 0xfa100000)
Jan 14 21:04:19 KrinkleMac kernel[0]: USBF:          145343.803          [0xffffff8038559600] The IOUSBFamily was not able to enumerate a device.
Jan 14 21:04:20 KrinkleMac kernel[0]: USBF:          145344.644          [0xffffff8038559600] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 1 of Hub at 0xfa100000)
Jan 14 21:04:23 KrinkleMac kernel[0]: USBF:          145348. 42          [0xffffff8038559600] The IOUSBFamily was not able to enumerate a device.
Jan 14 21:04:24 KrinkleMac kernel[0]: USBF:          145348.868          [0xffffff8038559600] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 1 of Hub at 0xfa100000)
Jan 14 21:04:24 KrinkleMac kernel[0]: USBF:          145349.299          [0xffffff8038559600] The IOUSBFamily was not able to enumerate a device.
Jan 14 21:04:30 KrinkleMac kernel[0]: USBF:          145355. 76          [0xffffff8038559600] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 1 of Hub at 0xfa100000)
Jan 14 21:04:30 KrinkleMac kernel[0]: USBF:          145355. 76          [0xffffff8038559600] The IOUSBFamily gave up enumerating a USB device after 10 retries. (Port 1 of Hub at 0xfa100000)
Jan 14 21:04:30 KrinkleMac kernel[0]: USBF:          145355. 76          [0xffffff8038559600] The IOUSBFamily was not able to enumerate a device.
Jan 14 21:04:42 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe
Jan 14 21:04:42 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x821A FirmwareVersion - 0x0041
Jan 14 21:04:42 KrinkleMac kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
Jan 14 21:04:42 KrinkleMac kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
Jan 14 21:04:44 KrinkleMac kernel[0]: [AppleBluetoothHCIControllerUSBTransport][ClearFeatureInterruptEndpointHalt] -- ClearPipeStall returned e000404f
Jan 14 21:05:20 localhost bootlog[0]: BOOT_TIME 1358193920 0
Jan 14 21:05:26 localhost com.apple.launchd[1]: *** launchd[1] has started up. ***
Jan 14 21:05:26 localhost com.apple.launchd[1]: *** Shutdown logging is enabled. ***
Jan 14 21:05:41 localhost com.apple.launchd[1] (com.apple.automountd): Unknown key for boolean: NSSupportsSuddenTermination
Jan 14 21:05:41 localhost kernel[0]: PMAP: PCID enabled
Jan 14 21:05:41 localhost kernel[0]: Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64

I've recorded the logs several times now and although a lot is variable (likely unrelated errors and crap). The following 5 lines consistently occur right before the freeze:
1/18/13 11:06:10.000 PM kernel[0]: IOBluetoothUSBDFU::probe
1/18/13 11:06:10.000 PM kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x821A FirmwareVersion - 0x0041
1/18/13 11:06:10.000 PM kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
1/18/13 11:06:10.000 PM kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
1/18/13 11:06:24.000 PM kernel[0]: [AppleBluetoothHCIControllerUSBTransport][ClearFeatureInterruptEndpointHalt] -- ClearPipeStall returned e000404f
1/18/13 11:07:22.000 PM bootlog[0]: BOOT_TIME 1358546842 0
1/18/13 11:29:27.000 PM kernel[0]: IOBluetoothUSBDFU::probe
1/18/13 11:29:27.000 PM kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x821A FirmwareVersion - 0x0041
1/18/13 11:29:27.000 PM kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
1/18/13 11:29:27.000 PM kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
1/18/13 11:30:02.000 PM kernel[0]: [AppleBluetoothHCIControllerUSBTransport][ClearFeatureInterruptEndpointHalt] -- ClearPipeStall returned e000404f
1/18/13 11:31:39.000 PM bootlog[0]: BOOT_TIME 1358548299 0

I've been using Firefox for quite a long time now and recently it has started giving some problems. It freezes randomly and doesn't respond to any clicks.

I am a proud user of Firefox. I started experiencing the freezing problem since i updated to Firefox 18 and now I am facing the same problem with Firefox 19. Firefox does not respond to any of my clicks and then I have to close it using Task Manager. This is happening frequently and randomly. It does not freeze on a particular site or anything else. It just freezes randomly. Please do reply if anyone has a solution to this problem.

see this:
[[Reset Firefox preferences to troubleshoot and fix problems|Reset Firefox preferences to troubleshoot and fix problems]]

Hi, the screen on my Ipod 4 is flashing white and it freezes sometimes as well. How do I fix this please?!

Hi, the screen on my iPod touch 4 is flashing white and it freezes sometimes too. Please help me!

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Flash and Silverlight freezing randomly

Similar Messages

Maybe you are looking for