Flash "applet" for finance info web site

"If you don't mind a bit of Flash on your site, I'd suggest
using one of these stock applets:
http://www.tufat.com/script52.htm
They draw from Yahoo finance, and are fairly easy to set up if you
have some basic HTML know-how. I chatted with the developer
recently and I guess he's planning dozens more such programs that
essentially repurpose financial data in the form of a Flash
"applet".

Well, that is hard to tell. Like I said the website may have updated their technology. Just because it works with the Desktop, doesn't mean there is not a reason that the laptop might not have a problem. You have 2 different systems and
most likely different configurations.
You may want to check Tools and in the add ons for both, look for Shockwave Flash Object...ActiveX Control..Flash10e.ocx should be installed and enabled.
Also for each check C:\Windows\System32\Macromed\Flash Right click the Flash folder and make sure for IE that the files are vs 10.0.45.2 by checking the properties.
If you have the correct Flash files and the correct SWO then, some other cause would be looked at.
It has been my experience to not "assume", but verify:-)
Thanks,
eidnolb

Similar Messages

Flash not displaying correctly for only one web site

In the last 3 or 4 days I seem to have problems with the flash content of one single web site not displaying correctly from my laptop. I have the same problem from both IE (version7.0.5730.11) and from FF (3.5.8). The site works fine from my desktop system so it's not the site specifically. The site (www.transparent.com/wotd/today/spanish.htm) has an embeded flash segment that does not display correctly and thus I can't click on two of the embedded buttons. It also does not display the background pattern for the flash. I'm running flash 10.0.45.2 based upon right clicking from within the embedded flash which takes me to the Adobe page with my version info. The Adobe page seems to display fine.
As far as I know I'm not having problems with another instance of flash - only this site.
Any thoughts on how to diagnose the problem? I've not added any new programs since this website stopped working but do have some background "tune up" programs that run. I'm assuming some settings are out of wack but don't know where to start looking. Any help folks woulc provide would be appreicated.

Well, that is hard to tell. Like I said the website may have updated their technology. Just because it works with the Desktop, doesn't mean there is not a reason that the laptop might not have a problem. You have 2 different systems and
most likely different configurations.
You may want to check Tools and in the add ons for both, look for Shockwave Flash Object...ActiveX Control..Flash10e.ocx should be installed and enabled.
Also for each check C:\Windows\System32\Macromed\Flash Right click the Flash folder and make sure for IE that the files are vs 10.0.45.2 by checking the properties.
If you have the correct Flash files and the correct SWO then, some other cause would be looked at.
It has been my experience to not "assume", but verify:-)
Thanks,
eidnolb

I want to create a SWF for my small web site. How do I do this? Do I need to purchase "Flash Builder"?

I want to create a SWF for my small web site. How do I do this? Do I need to purchase "Flash Builder"?

Hi Developer_46038,
if for example all the properties and object are stated as list, i think there is a tool that overcome cross list.
http://listrollup.codeplex.com/
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/13a51be5-4007-46e8-bbb2-5e04320dfebd/cross-list-webpart?forum=sharepointcustomizationlegacy
you can also using dataview webpart to show the cross lists:
http://office.microsoft.com/en-us/sharepoint-designer-help/create-a-data-view-HA010094804.aspx
http://office.microsoft.com/en-us/sharepoint-designer-help/connect-two-data-views-HA010169133.aspx
3rd party: http://community.bamboosolutions.com/blogs/bambooteamblog/archive/2009/03/11/relational-database-capabilities-for-sharepoint-lists-cross-list-web-part.aspx
but i am not quite sure how crystal report will do, if you can make the crystal report as also list, i think its possible,
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/8247edf5-dee8-49d8-b7ee-9e49bfd97b9b/crystal-report-in-sharepoint-2010-webpart?forum=sharepointdevelopmentprevious
Regards,
Aries
Microsoft Online Community Support
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

IWeb vs. RapidWeaver for small business web site development

I am going to develop a web site for our small tour business that would contain descriptive text, pictures, testimonials, and an e-mail link that cannot be swept by bots. I have been scouring the forums about iWeb 2.0 and am hearing that there are a number of factors that limit it's suitability for a commercial web site. I would appreciate some feedback on the following points.
1. Would using an iWeb 2.0 template cause display problems on a PC running Internet Explorer; Microsoft does not follow approved web standards?
2. I would want search engines to find and index our site so that people could find it using Google or Yahoo. I understand that .Mac blocks access by spiders, but you can manually list your site with Google. Is this true?
3. I want to use our domain name in the e-mail address, is this possible with iWeb?
4. I would also like to use my .Mac account to host a site about my grandchildren using the iWeb generated URL, this doesn't seem possible if I have listed my business domain name.
5. Does anyone have any experience using RapidWeaver? This seems to be very iWeb like and may be a better solution for a small business.
6. Should I just use iWeb for the grandkids and RapidWeaver for the business, I have never written an line of code in my life and need something that is truly WYSIWYG.
Thank you for your feedback!

Hi There, I'll give you my info based on what I know and i'm sure otheres will correct me where they have other experiences....
1. all websites have niggles regardless of what program you use to create them with, iWeb sites are pretty good for compatibility, but as with any site, the more 'stuff' you add, fancy code or funny image types there wil lbe a number of people who have problems. I've found iWeb to be far less troublesome than sites generated from scratch using other programs, even dreamweaver (i'm a graphic designer).
2. dunno about .mac blocking stuff, but i've done commercial sites for clients that I've submitted to Google and they show up just fine when searched for.
3. e-mail address can be ANYTHING. for example you could even put a link to send me mail if you wanted. it is literally just a link to open someones mail program and add a mail address / subject ready for them to send.
4. You can set iWeb / .Mac to use a specific address that you have purchased. and you can have multiple domains from within iWeb.you can't directly publish sites to more than one address, but you can publish to folders and upload to different addresses, or if you make more than one site in iWeb, the first in th elist will become the one that your browser goes to using th emain address (www.yourdomin.com), but you'd stil lbe able to have other sites with their own sub address (www.yourdomain.com/grandkids) for example. you can even add password protection to different sites so your clients don't see photos of you and the grandkids lounging in the garden the day you said you were doing their job!
5. I can happily use Flash Dreamweaver, iWeb and plenty of other stuff, but found Rapidweaver to be a poor version of iWeb. It has certain benfits, but it is nowhere near as user friendly. I'd start with iWeb regardless, and see how you get on. Plenty of people have trouble enough with iWeb and it's basically a no-brainer compared to anything else out there - (short of yahoo webbuilder (pretty good for freebie!)
Just beware of the iWeb templates, they are getting very well known and don't lend themsleves to looking very professional. but use iWeb as a program to put together a simple site and it is easy to use and gets pretty tidy results. see here for simple site done with iWeb without using templates, and resulting in a more pro look and doesn't look like everyone elses site.
http://www.garethmorris.com
6. if you've never even tried editing HTML you want iWeb i promise you. it really is the best for starting offf with, and like i say if you design your own site rather than just using the templates without changing stuff you can get some good results - and quickly / easily.

Flash player works on https web sites but not on http web sites ?

Flash player works on https web sites but not on http web sites ?
I've tryed a lot of things to solve this problem but impossible to find the solution.
- re-instal flash player
- disable the firewall (windows)
- disable the firewall and the antivirus (bitdefender)
I test my computer on an other internet provider and everything works correctly
I test an other computer on my internet connection and everything works correctly.
The problem comes from my computer on my internet connection.
I'll appreciate a solution.
Thank you.

This is what you should see under "plugins" in Opera:
Make sure Flash Player is listed and enabled.
It comes from the same place as the plug-in for Firefox, so one won't work if the other doesn't.
If that doesn't work, try a clean install. http://forums.adobe.com/message/4041846

Can the WLPI be used for a perl web site

We have a client, which has a perl(Apache/mod_perl) based web site. Cutomers submit orders on the web site and right now there is an order-processing system, but the client is looking for workflow/process product which will ease with all this order processing stuff like acknowledgement, approval, shipping, etc....So my question here is, can they use the WeBLogic Process Integrator for this purpose? The reason I am asking this is, looking at the WLPI docs, it looks like a Java/WebLogic only product and cannot be used for a perl web site.Thanks,Shireesh Thanneru

Yes.
However I would not recommend it, at least as your primary connection for the SmartTV. Relying primarily on VZW data plans is a bad way to view video services such as Netflix at the moment. It is very easy to chew through your plan with only a few videos depending on the resolution and a few other factors. Not only that but a smart TV may be periodically checking the internet from time to time to download firmware updates or provide reporting stats to the manufacturer.
VZW Jetpacks continue to be a poor choice for home primary internet replacement. The data plans that come from VZW and all other metered wireless providers are not friendly to this kind of internet traffic. Letting your guard down for a moment could result in costly overages and once you accumulate them you will be liable to pay them. A normal cable or DSL line with a high/unlimited cap would be more appropriate.
If the Jetpack is a backup or temporary internet connection then go for it. This is what a Jetpack is designed for, you can get by every now and then without too much risk. Just make sure you are powering your Jetpack down as soon as you are done streaming and keep a close eye on your data plan before and after any major viewing.

Can I create a muse web site for someone else and allow them to make edits to site. Example to update gigs for a musician web site.

Can I create a muse web site for someone else and allow them to make edits to site. Example to update gigs for a musician web site.

Yes, you can. Sites published with BusinessCatalyst or to an FTP host can be edited by clients. Here is a short tutorial about the new In-Browser Editing feature: In-browser Editing | Adobe Muse CC tutorials

Sometimes a web page appears with only text and no picures. It is not always the same site and does not always happen. If I switch to Explorer for the same web site it always works

Sometimes a web page appears with only text and no picures. It is not always the same site and does not always happen. If I switch to Explorer for the same web site it always works

Thank you, it worked with just F5. I don't know whether CTRL + F5 would work because the problem has not come back yet!

Can't get simple Flash document to post to web site.

I have created a simple page in Flash CS4 for my class and for some reason when I go to publish the page online all I get is an empty page colored blue (background) but neither the title or any of the graphics or images on the page show up, it is kjust a blank blue page on the web browser. I really need an explanation for this so that I do not fail the project. Please help!!
This is the link to the page I am getting and if you can please view the source code and tell me what in the world is wrong:
http://zlloyd1.com/MachoaNorfolkHistory.html I know it is something to do with the paths to the image files but they are all present in my online images folder and I do not know how to modify the HTML file created when you publish a Flash document. I do have some experience with HTML coding but this is not something I recognize. I will await your reply!!
Lost,
Zachariah A Lloyd

Dear Adobe Support,
I am not entirely sure how to add attachments to a forum post. Could you please explain this to me and I will be more than happy to attach the swf file?? I will await your reply and thanks again!!
Zack Lloyd

How to add a specific font needed for a particular web site?

The web site "www.gadima.com" requires the Marathi font (True Type), for displaying its content properly in Marathi language. This font is already installed in the CentOs. Firefox does not display the information in proper Marathi fonts, but displays only garbage.
I already set this "Allow pages to choose their own fonts, instead of my selections above"
still this not work..
In opera this web site displays proper marathi font.
I have "Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:1.9.2.24) Gecko/20111109 CentOS/3.6-3.el5.centos AlexaToolbar/alxf-2.14 Firefox/3.6.24"

Did you install all 5 fonts?
*http://www.gadima.com/help.php
EDIT:
I see the same on Linux in Firefox 3.6.25, so it looks that the MillenniumGanesh and LscapeRegDevPriya fonts aren't working in Firefox 3.6.25 (it works for me in Firefox 9).

Using iWeb for a persoanl web site.

Hi everyone
I have used iWeb to create a web site to upload to my .mac account before and its really easy.
Now my question is, can I create a web site with iWeb but upload it to a web site of my own on a third party web hosting company?
if yes, can you also explain how to do it?
Thanks a lot
Bob

Yes, you can. First, you probably want this 3rd party hosted site to be separate from your original site. This might entail making a separate Domain file for iWeb to keep the sites separate. Another way to do this would be to create a separate system login account with its own instance of iWeb and separate Domain file. Again, this is a way of keeping the sites in different Domain files so that you can publish both sites independently and to different places. If, instead, you are basically starting over and don't mind erasing your previous website then you can disregard this.
Assuming that you have the particulars of preparing your separate site worked out (as above), then all you have to do is to design your separate site and then in iWeb choose "Publish to Folder". This will place all the files needed for this website in a folder on your desktop. Then you will need to get ahold of an FTP program of your choosing (Fetch and CyberDuck are two that are mentioned all the time). You will also need to figure out exactly where you 3rd party webserver wants you to upload files. You will use the FTP program to navigate to the desired web server directory and then upload the site folder that iWeb made into that directory. That's it!
Here are some tips from Tom Gewecke...
http://homepage.mac.com/thgewecke/iwebserver.html

Calculators and Searches for Real Estate Web Site

I have a friend who has asked if I can make a real estate page for them them using my iWeb '08 program.
I've never done anything like mortgage calculators and home/msl searches. Does anyone know how to do these things, web sites that help with this, or is it even possible?
Any advise, tutorials, links, anything would be greatly appreciated. Thanks all.

There are plenty of free mortgage calculators you can add to a website....
http://www.widgetbox.com/search?q=loan+calculator
http://www.calculators4mortgages.com/calculators/loan/amortization_schedule.html
Your friend should have access to the MLS through their Realtor Association.
When my wife was involved in real estate in Northern California acting as a buyers agent for investors I used this site for research....
http://www.greathomes.org/
I'm sure you'll find other sites like this for other areas.
A realtor doesn't allow clients to search for homes - that's their job.
The best thing to have on a site like this is a form that potential clients can fill in with all the details of their requirements.
Wufoo has a mortgage application form which I modified for collecting home buyer information. Don't ask me how I did it because it was about two years ago!
As long as you are publishing to a hosting company that allows you to run scripts, you can build your own forms. Tutorial....
http://www.w3schools.com/html/html_forms.asp

Single SSL Web Listener for hosting multiple web sites

Hi All,
We are currently hosting multiple websites with Single HTTP Web Listener .. As of now it's everything is working fine..
Now we have planned to have SSL for the hosted sites
Each hosting site will have different SSL Certificates and i am little confused to use Single SSL Web Listener to host multiple web Sites...
Can any one guide me to use Singel SSL Listener for using all hosted sites..
We are having TMG on DMZ Network on Single Nic..
KJSUBBU

Hi,
it is no problem to host multiple SSL websites with only one IP address / certificate on the TMG Server. Only the authentication options for the published websites must be unique, because you cannot use multiple authentication options in one Listener
TMG Server uses HTTPS to HTTPS bridging, so you can use Host header and more to distinguish between the different internal websites:
http://technet.microsoft.com/en-us/library/cc995178.aspx
Regarding the SSL certificate on the internal webservers. TMG must trust the issuing certificate authority which issued certificates for these websites and the name you used to connect from the TMG Server to the internal webserver must part of the CN (Common
Name) or SAN (Subject Alternate Name) on the certificates of the webservers
regards Marc Grote aka Jens Baier - www.it-training-grote.de - www.forefront-tmg.de - www.galileocomputing.de/3276?GPP=MarcGrote

HT4623 I do not like the new iOS 7 operating system on my iPad. I do not like the Safari works, I do not see a way to enter or search for a new web site. Is there a way that I can go back to the older operating system?

I do not like the new iOS 7 system on both my iPad 2 and iPhone 4S. I can not like the way Safari works, I can not see a way to enter name to search for new web sites. Is there a way I can go back to the old iOS 6.1.5 operating system on my devices? Thank you.

I can not see a way to enter name to search for new web sites
Put your search terms in the combined URL and search bar at the top of the browser (exactly the same as you do in most modern desktop browsers such as Chrome, Safari, Explorer). There is no separate search box, just use the box where you enter web addresses.
And no, you cannot downgrade.

How can I set Internet Explorer document mode to be used for Outlook folder web sites?

Hi,
I'm using an application that creates an overview of all our outlook calendars into a HTML web site which is displayed via a MS Exchange public folder - using the folder web site feature.
With a recent update of this application I'm getting scripting errors that are caused by the document mode which is active in Outlook (IE7 mode).
Even when using the following meta tag:
<meta http-equiv='X-UA-Compatible' content='IE=edge'>
to force IE into the most current rendering mode it still uses IE 7 mode.
Is there any way to fix this?
Thanks
Thomas

Do you mean MapiFolder WebView?
MapiFolder WebView is the folder property but there is no settings or relevancy properties to control it to open any of IE mode in Outlook client. Thus, I think we cannot use Meta tag to force the page to open with a specific IE mode.
Not sure which exact application you are using here, but it happens right after a recent update, you probably need to check with the support of the application for support.
Kapaal.

Flash "applet" for finance info web site

Similar Messages

Maybe you are looking for