Flash audio cutting out, video stalling

Hi,
My flash isn't working when streaming video/music - keeps stalling or sometimes the audio cuts out and the video continues. Very annoying!
I'm using Vista 32bit, Firefox and have the latest version of flash.
I've tried watching html-5 videos and they seem to work fine?
Any help?

Try if the latest Flash Player beta works better: http://labs.adobe.com/downloads/flashplayer.html

Similar Messages

Audio cuts out in long movie

I've created a feature documentary in iMovie lasting 1h35m. I've designed the 4:3 Revolution menus in iDVD and everything previews beautifully in iDVD. Assets were encoded at Professional level. All audio is in AIF 48KHz.
Then from iDVD I saved to a disc image and then mount the image and play it in DVD Player. Everything seems fine until the last 5 min of the presentation where the audio cuts out (video still plays). Otherwise the audio was synchronized throughout. It cuts out in the middle of an audio file that's just like all the other audio files in the movie. This final segment plays fine in iMovie and previews fine in iDVD.
I've deleted the encoded assets and run it again after uninstalling Perian. Still no joy. Does anyone know what to suggest other than use Toast?
It's not acceptable to me to put multiple movie files into a slideshow (I've seen this suggested) as you have to click next to go on to the next part of the movie. I also don't want the viewer to have to return to the menu to be able to watch the whole show straight through.
Help as this is like getting to the end of a thriller and discovering the last few pages are ripped out! What happened?

Has nothing to do with players. iDVD just does not handle the audio properly. DVD slideshow format is not the same as video - it basically shows still images for a set amount of time while the audio plays. The 99 image limit is a limitation of the DVD slideshow specification which iDVD gets around for the images but it doesn't work for the audio for some reason.
I have learned of another solution which I will try though; Make a DVD slideshow with multiple slideshows - 1 for each audio file, for example. You end up with chapter markers for each song/sub-slideshow, which is what I wanted anyway. In the future, I will generate the slideshow in iMovie or just use DVD SP to avoid the problem. My problem is I spent a lot of time putting everything together in iDVD and have it just the way I want it. I can't afford to redo everything from scratch so I'll just group the images according to the audio into separate slideshows which shouldn't be too time consuming. I'll let you know how it works.

After recent upgrade to Yosemite on Macbook air bluetooth audio cuts out and associated video stops with audio. Likewise with airplay and Apple TV. I have deleted all my saved wifi connections and restarted numerous times. I do not expect a resolutio

After recent upgrade to Yosemite on Macbook air bluetooth audio cuts out and associated video stops with audio. Likewise with airplay and Apple TV. I have deleted all my saved wifi connections and restarted numerous times. I do not expect a resolution from the community, but hope to get the attention of Apple engineers. If you are having same problems or have a miracle cure I am all ears.

May start my own thread, but I'm having similar issues.
I've been using an old iMac (running 10.7.5) and Apple TV for years with no issues. Last week I bought a new Macbook Pro running Yosemite and have had audio issues multiple times. The weird thing is that sometimes it works flawlessly, other times (like now) I spend half an hour just trying to get a song to play.
My issues are: When I got to "computers" in Apple TV to stream my music, my music is sometimes chopper or intermittent, and I seen to know when it's going to happen based on the status wheel just before it plays. When I choose a song, the status wheel will spin for an unusually long time, usually an indicator that the audio is either not going to work, or stutter.
When it does finally pull up a song, the playhead sits at the beginning of the song for a good 3-5 seconds before actually playing. Then, when it starts playing, it's all downhill. It will play a few seconds, drop out, play a few more seconds, drop out, and then ultimately the playhead will keep moving across the song as if it's playing, but there's no audio.
Again, this is a new phenomenon never experienced by me. I've tried everything I could think of, some of them all at once:
• restart Apple TV
• restart Macbook Pro
• quite iTunes/open
• turn off Home Sharing on iTunes then reconnect it
• unplugging and cycling both my modem and router
None of these have alleviated the problem.
The odd thing is, like this morning, the audio started up perfectly and never gave me any issues. It wasn't until later in the day that it started. Perhaps after the macbook pro had been put to sleep? Not sure.
Regardless, this is an annoying trait, one that's new to me and my system (as stated, worked flawlessly until my new purchase), and is 100% limited to either a) the macbook pro b) Yosemite or c) both of them.

Audio cutting out at the end of my video

So I exported a AVCHD video into an uncompressed AVI and then re imported it. I brought it into the time line and edited it a bunch and also brought in another video and mixed that in. For about half of the video, I used the audio from the video itself... but in different sections, I brought in a separate wav file. I used this wav file towards the end of the video for about 1 minute of the video. After I was done, I exported the entire project into a normal avi file because what I'm going to do for now is upload these to YouTube and so I don't want the file sizes to be too huge.
So I opened up the final avi file in VLC player... and everything is great... except the last 30 seconds or so of the video doesn't have the audio. It plays the audio from the wav about halfway through... and then it stops. The video continues... but there is no sound.
I went back into the project and everything looks fine. The wav file extends to the end and the audio plays fine when I preview the video. So I exported again just to see if it was some sort of error the first time... but no... it did the same thing.
So why is the audio cutting out at the end? How do I fix it?
Thanks in advance.

Ok I figured out how to do a better quality MP4. However I had two problems. 1... the quality isn't near as good as the AVI. 2... now the audio cuts out in even more places instead of just the end. It seems that the .wav file I imported is causing the problems. In the AVI, the wav file cuts out at the end. In the MP4, the wav file cuts out in the middle AND at the end. I don't understand why this is happening. The wav file plays all the way through normaly, and it also sounds find when I preview the video... but when I encode it... it cuts out in places regardless of the format. Is there some step I'm missing in the process to make sure the audio is all in place?

Audio cuts out half way through video after conversion.

I just put together some video clips I've shot into a single video, then ran it through conversion. Half way through the completed video, the audio cuts out for the rest of the film. Yet in iMovie, it's still there. I've converted twice and it cuts out in the same spot. Could corruption in a single clip, kill the audio for the following clips? Since it takes hours to convert, I thought I'd ask before deleting the suspect clip and starting again.
I've spliced together clips before without problem, using the same camera source.
Thanks.
Cheers

I figured a work-around. From the clip where the audio cut out till the end, I dragged those clips to a new iMovie project. After converting, the sound was intact for that portion. Then I opened the complete version with audio cut-off in Quicktime Pro. Deleted the the half with audio loss. Then joined the new half I just created. Voila!
Only when I went to post the video on my vlog, did my Internet connection die (Comcast strikes again).

Audio cutting out when using D2 external Firewire Drive

Hi,
I have just upgraded to Logic Studio, using the following setup:
Macbook Pro
Motu 828
AMT 8
Logic Studio
D2 Lacie 500GB Firewire Drive
As the MacBook's internal hard drive is not sufficient to record and playpack efficiently, I was advised to get an external Firewire Drive. Given that I have very little space on my laptop - (am running windows on a partition also) I am trying to save my logic files to the external HD. When creating tracks specifically using Audio Instruments, the playpack keeps cutting out.
I am connecting the HD via usb 2. I am also having to freeze the tracks in order to record more layers. There is lots of clipping and latency. I thought by using the external, this problem would be resolved.
The HD is not playing back the tracks fast enough, and keeps cutting the audio out. The audio cuts out everytime the blue light on the drive flashes.
I cannot save the files to the MackBook HD as there is notenough space.
Is there something very wrong with my setup?
any advice would be really appreciated.
ps. I am a bit of a newbie
thank you in advance.
Spy

Connect it via firewire 800. USB2 is not good for audio or video streaming.
I have 3 D2's connected to my mac pro, works like a charm.
good luck.

Encoded FLV audio cuts out half way

I'm trying to encode a.mov file to .flv using Flash Video
Encoder CS3. Every time I encode, no matter what settings I use,
the audio just stops half way through when played back in Flash. If
I encode in Squeeze, it works.
What's the deal?

I am having the same problem. I am outputting a video from
Final Cut Pro to QT, then checking my QT file to make sure the
audio is there, then I encode in Flash Video Encoder CS3, and like
the person below me, the audio cuts half way through the video.
I was using a 480x360 QT file and converting to 15 fps
480x360 flv, audio cuts out. Using a 320x240 QT file and converting
to 15 fps 320x240, audio is there.

Audio cuts out for a few seconds

Hi,
I'm not sure if anyone is experiencing this but it happens to me all the time and it's so so annoying.
When playingback the timeline on CS6 the audio cuts out at random places and then it comes back, then it goes again for a few seconds then back again,..while video keeps on playing.....this is just random and it can happen as soon as you press play or after a few seconds and it happens when audio is stereo, mono, mp3,wav,aif, you name it.
Also, it happens regardless of playback quality or timeline render status (red, yellow or green). My computer is quite fast + 24gb RAM so I dont think the PC is a problem, It also happens on a different computer within our studio.
Needless to say that editing under these circumstances is becoming impossible/frustrating and I'm even considering finding other software to edit with! I've found others with this same problem at cretive cow http://forums.creativecow.net/thread/3/935424
If anyone from Adobe reads this, please help!!!
thanks in advance

Unfortunately there's no fix for this problem that plagues Classic since release. Considering that a new generation appeared I guess we have no reason to expect a fix anymore.
I also have the problem and it makes the iPod Classic less desirable to be used as a music player than a generic $10 (no name) usb stick.

Audio Cuts out after a few minutes. IChat AV 2.1

I have surfed and have not found any topics like this yet. Audio is cutting out after chatting with another Mac - AV user. Both microphones still appear to work in the preferences, but the person can not hear on the other side. Video works fine, but now audio. Any help or suggestions would be helpful. Virex 7 has already been removed. This solved the video problems. Merry Christmas.

Hi Brian,
Your title states that the audio cuts out during a chat but the post itself seems to imply that you do not have Audio after the chat.
IF it is cutting out during a Video cut can you please tell us what connection speeds both ends have ?
It should be a at least 100kbps up and down.
If it is not you will have problems. You may find that a cable connection varies as the chat goes on and this might be part of the problem.
Soemthings that might help:
GO to System Preferences > Quicktime > Streaming tab and set the Connection sped to mathc the download speed at either end.
GO to iChat > Preferences > Video > bandwidth Limit Drop Down and set this to NONE.
Ralph

Touchsmart 9100 Audio Cuts Out

I have Touchsmart 9100 with Realtek High Definition Audio running Win 7 Home Premium SP1, 8GB RAM (currently: 7.75GB Physical, 1.88GB Available, Total Virtual 13.7GB, Available Virtual 7.53); Dell 5650 5.1 surround sound with the three-to-one reducer connector plugged into the analog audio out port.
Realtek Driver
c:\windows\system32\drivers\rtkvhd64.sys (6.0.1.7076, 3.53 MB (3,698,904 bytes), 2013-12-14 22:28)
Audio Codecs
c:\windows\system32\imaadp32.acm   Microsoft Corporation       OK   C:\Windows\system32\IMAADP32.ACM   6.1.7600.16385   21.50 KB (22,016 bytes)   2009-07-13 20:18
c:\windows\system32\l3codeca.acm   Fraunhofer Institut Integrierte Schaltungen IIS   Fraunhofer IIS MPEG Layer-3 Codec   OK   C:\Windows\system32\L3CODECA.ACM   1.9.0.401   79.50 KB (81,408 bytes)   2009-07-13 20:22
c:\windows\system32\msadp32.acm   Microsoft Corporation       OK   C:\Windows\system32\MSADP32.ACM   6.1.7600.16385   23.50 KB (24,064 bytes)   2009-07-13 20:18
c:\windows\system32\msg711.acm   Microsoft Corporation       OK   C:\Windows\system32\MSG711.ACM   6.1.7600.16385   14.50 KB (14,848 bytes)   2009-07-13 20:18
c:\windows\system32\msgsm32.acm   Microsoft Corporation       OK   C:\Windows\system32\MSGSM32.ACM   6.1.7600.16385   28.50 KB (29,184 bytes)   2009-07-13 20:18
My streaming video audio will cut out for several seconds at a time then return to normal again. I can, when the audio cuts out, turn up the manual volume on my surround sound to hear however when audio returns, I get blasted until I turn down the surround sound again. High CPU utilization *may* be a contributor to this problem - currently averaging about 95%.
What can I do to correct this problem?

Hi MDS,
Here are the possible HP products for a Touchsmart 9100. Both models do not list Win 7 Home Premium as an HP supported operating system. Did you upgrade from Vista to Win 7 or did you perform a clean install of Win 7 Home Premium?
Both models also reflect this updated driver version (6.0.1.5932) for Realtek High Def Audio. You have driver version (6.0.1.7076) installed on your PC.
You could try installing the version per the above link if you have Win 7 Pro 32 bit or 64 bit installed.
Try checking your file system by opening an administrative command prompt and entering the following: sfc /scannow
You may have to schedule this task to run at the next boot. Please reboot your system to run the task.
Do you know which process is consuming all of your PC's CPU time?
Jaco
****I am not an HP employee****
Please give a" Kudos" if advice received is relevant or" Accept as Solution" if your problem has been solved.
+++++++++++++++++++++++++++++++++++++++++++++++++++++
H8 1380t CTO, Intel i7 3820
16 GB DDR3
Pegatron Motherboard- IPIWB-PB (Pittsburgh), Radeon HD 7570 1GB. Win 7 Home Premium upgraded to Windows 8.1 Pro.
Envy Phoenix 810-150se, Intel i7 4820k
16 GB DDR3
Pittsburgh2 Mainboard, NVIDIA GTX 645- 2GB GDDR5. Win 8.1 Pro.
HP 560z CTO AMD Phenom II X6 1090T
16 GB DDR3.
Radeon HD 6570
Win 7 Home Premium upgraded to Win 7 Pro.
HP ENVY 17t-j000 CTO Quad Edition Notebook. I7 4702mq
12 GB DDR3
Nvidia Graphics
Win 8 Pro
Errare humanum est.

Sony STR-DN1040 audio cuts out briefly, frequently

Audio on my new Sony STR-DN1040 cuts out whan SAT/CATV is the source. This happens frequently (every 30 seconds to a minute, unpredictably), though it is only for a fraction of a second each time.
When the audio cuts out, the following items on the front display panel of the receiver all flash off momentarily:
A.P.M.Dolby Digital SymbolD.L.L.
When I reconnect the cable box directly to the TV instead of the receiver (same HDMI cable), the audio issue goes away. I have tried resetting/clearing the receiver. Any thoughts/suggestions?

Thanks again for your suggestions! They are much appreciated.
I have noticed that the problem is apparent on some TV channels more than others. Some channels seem to cause the audio drop and other channels don't.
I have now tried attaching my Blu-Ray player to the SAT/CATV port using the same HDMI cable. The problem was not apparent (but I haven't noticed the issue with the Blu-Ray source previously, so perhaps that helps rule out the SAT/CATV port).
I also tried attaching the cable box/PVR to the BD port and the problem was still present (as mentioned earlier, mostly present on certain channels).
The software is up to date as of last week (ver. s9327.1074.0).
I also tried powering off and disconnecting everything, then reconnecting and powering everything on in the described order. The issue is still present, regardless of the HDMI input port that I use. As mentioned before, this happens only when I route the SAT/CATV signal through the receiver. When I bypass the receiver, by connecting the cable box/PVR directly to the TV, the audio does not cut out on the usual affected channels.

Audio cuts out most of the way through an iDVD image

We created a Quicktime file using Final Cut Express HD 3.5, and imported the Quicktime fill into iDVD 6 (all patches have been applied to iDVD and to Quicktime, and Quicktime has been upgraded to Pro version). The iDVD preview shows that all audio is present all the way through the end of the video(about 1 hour and 5 minutes), which means that the Quicktime file has all the audio present.
However, after creating a DVD disk image with iDVD 6, the audio cuts out completely about 55 minutes into the video. The spot where the audio cuts out is not near any chapter marker nor near any transition of any kind in the Final Cut editor session.
By the way, I am creating the image on an external Firewire drive with 112 Gbyte free, although we also tried the internal hard drive which has about 20Gbyte free.
How can I figure out how to get all the audio onto the image created by iDVD?

I believe I've found the cause of the problem! Within Final Cut Express, I found a system setting for output buffer size, set by default to 2Gbyte. I also found that the default 'Convert to Quicktime' setting is for Internet Fast Start. I increased the buffer size from 2Gbyte to 3Gbyte and unchecked Internet Fast Start, and I have no more audio drop out!
I think that iDVD has a bug when multiple file segments are linked together in the Quicktime file (because of the smaller FCE output buffer size). Note that the iDVD preview did not experience the problem, so that part of the iDVD app seems to handle multiple file segments correctly, whereas the part that processes the file segments while creating the DVD image seems to have the bug. Increasing the buffer size masked the iDVD bug.
So if anybody from Apple is listening, please fix your iDVD bug please!
Concerning the ZR85, I do re-use tapes quite a lot and have never experienced problems. I do clean the ZR85 heads periodically. However, I shall consider using new tapes more often.

Audio cuts out over hdmi

My current setup is a 2010 mac mini running OS X 10.7 with audio and video going through a HDMI cable to a onkyo receiver which then passes sound to my home theater speakers and HD TV. Every now and then, the audio will cut out for about 4-5 seconds but the video will be fine. When the audio cuts out, the status display on the receiver will show "no signal". This never happened when it was running OS X 10.6. Has anyone else experienced this problem? Any suggestions for a fix would be greatly appreciated.

Hello dmurfett,
Welcome to the HP Forums!
I see you have some issue with sound cutting out at higher levels. Can you please confirm if this is happening with the notebook speakers and headphones, or if it's only one of them.
Just to make sure the correct driver is installed and not the Windows driver, uninstall the audio drivers and reinstall using one of these downloads:
Windows 7 64-bit - IDT High Definition (HD) Audio Driver
Windows 8 64-bit - IDT Audio Driver
You can also try this:
1. Open Control Panel and click Hardware and Sound.
2. Click Sound.
3. While on the Playback tab double click on Speakers to open the Properties window.
4. Go to the Advanced tab and click the Default Quality drop-down.
5. Select the highest quality output (the highest Hz setting), and click Apply.
6. Click OK, and test this setting.
If this doesn't work, try the following:
1. Open Control Panel and click Hardware and Sound.
2. Click Sound.
3. Click on the Recording tab, and double click Stereo Mix to open the Properties window.
4. Go to the Advanced tab and click the Default Quality drop-down.
5. Select the highest quality output (the highest Hz setting), and click Apply.
6. Click OK, and test this setting.
It would help to know which operating system you are using. To see which version of Windows you are using click here: Which Windows operating system am I running?
I look forward to your reply!
Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
The Great Deku Tree
I work on behalf of HP.

Audio cuts out at slide transitions when played on TV

The audio on the DVD is my own narration, nothing downloaded from iTunes--and it works fine both in the iDVD viewer and DVD player on my computer. But in the DVD player attached to my TV, the audio cuts out at each slide transition, which are dissolves.
The image files are relatively small, and there are only 25 slides. I burned the DVD at 4x rather than maximum speed to enhance quality. In preferences, I have "best quality" rather than "best performance" checked for the encoder settings.
Please let me know if you have any ideas for a fix.

Is the audio embedded in the video or did you do a voice over?
If it is embedded in the video, you might try extracting the video and then adding the transitions.
Sue

Audio cuts out (mDP - HDMI) when entering clamshell mode

Hi - my MBA is late 2012 (8 GB, 2 GHz i7, 10.7.4). When I hook it up to the LED TV (a Toshiba 40L2200U) using a Folsom miniDisplayPort to HDMI cable (no separate adaptors, it's a 6' cable with mDP at one end and hdmi at the other) it works fine - audio is transmitted and it comes through the TV speakers. But when I close the lid and try to continue watching with the laptop in clamshell mode (a magic trackpad is around that is paired to it), video continues just fine but the audio cuts out.
Annoyingly, when I open the lid back up the audio still doesn't work. I have to futz around a while before it comes back (restart any programs with audio output, unplug the cable and plug it back in again, move the audio output in system preferences to core audio and back again to the TV etc.)
Does anyone know what's up with this? I don't think it can be the cable's fault--clearly it's able to transmit audio along with the video, and nothing changes about the cable when I close the lid.
Could anyone with a similar setup (MBA/Lion -> TV via HDMI adaptor) let me know if you are able to enter clamshell mode without losing audio over hdmi?

In 'alsamixer' I have a setting called ''Headphone Jack Sense' which if enabled mutes the speaker when a headphone jack is inserted.
What's the output of
amixer get 'Headphone Jack Sense'
When posting configs, code or command output, please use [ code ] tags, not [ quote ] tags https://bbs.archlinux.org/help.php#bbcode
like this
It makes the code more readable and - in case of longer listings - more convenient to scroll through.

Flash audio cutting out, video stalling

Similar Messages

Maybe you are looking for