Flash audio out of sync even as image sequence in Premeire Pro
I'm using Flash CS4 to animate hi-def music videos. It seems that I can't keep the audio to stay in sync for anything over 2 or 3 minutes.
- I'm working a stage at 1280x720 and 30 fps
- audio is streamed on a separate layer
- mp3 publish settings are: stereo 128kbs
Inside the FLA file everything syncs perfect, but when it's published, everything drifts in the SWF and in everything else I've tried.
I've tried exporting image sequences and popping the sequences into premiere pro to match up with the original wave, and i've also put the swf file in a premiere pro project as well. Whether a SWF or an image sequence, it always lapses after 2 or 3 minutes.
I've asked the adobe portal folks and they sent me a link to a "dreamweaver" article...so my regard for their capicity is not high.
Anyone have any ideas? or am I doomed to never animate anything longer than 2 minutes in Flash?
The topper of it all is, I've used a friend's REAL OLD Flash MX and have not had any problems.
no actually all the animation is smooth and plays fine. but in files longer than 2 or 3 minutes the action starts to happen later and later and later until i'm seeing the animation full seconds after the matching sound. this happens when source wavs are matched to published files inside premeire pro too. it doesn't matter the format...swf / mp4 / flv / mov...any encoding of the video matched to the source wav is the same result as the published swf.
it's as if there are more frames in the publish than in the FLA. i guess i could compare and contrast by doing some math and creating some traditional x-sheets and completely disregard the reference streaming audio in the FLA...but that would be a ton of work and disregard the convenience the technology is intended to provide. i guess i'll just continue editing together a bunch 1-2 minute publishes until i give adobe even more money in october...boo hiss.
thanks for your vigilance! i might just be out of luck
Similar Messages
-
Hi everyone,
I have an animation that I am exporting as either a .wav or .mov file then editing in different software but when I import the new file it is out of sync. That sounds confusing so I will explain.
The project is a cartoon and a temp dialogue track was created before animation started. Then that temp track was used to animate over and do lip synching. Recently, actors have re-recorded the original temp dialogue track. So, I need to export the original dialogue track out of Flash, use an editor, in this case Final Cut Pro, and replace the dialogue then export that as an audio file and bring it back into Flash.
But it is always out of sync. I have even exported a .wav file from Flash then immediately re-imported it and put it on the timeline and it is already out of sync. And it is the exact same audio! I don't even know how that could be possible. Surely if you export a wav from Flash and then re-import it, it should be exactly the same.
Does anyone have any ideas?
Cheers,
RobCouple things, Flash uses "stream" or "event" sound:
"To Stream, or Not to Stream
Flash can handle sounds in two different ways, Stream or Event. A streamed sound plays as it comes into the computer. You dont have to wait for the entire file to download. An event sound must fully download before it plays, but is stored in the memory for later re-use.
After youve placed a sound into Flash, youll have to decide if the sound should stream or not."
http://www.awdsf.com/courseware/flash/flash6_sound.htm
Second, be sure that the frames per sec of the Flash doc EXACTLY matches that of the audio.
Flash high recommmends AGAINST embedding sounds into the timeline (unless they are very short), but I've not had any problems even keeping embedded video in sync with it's sound track as long as I set the Flash document frames per second to exactly match that of the audio.
So for example, a video (with audio) recorded at 29.97 fps, and embedded directly into the main time line would need to have the Flash doc fps set at 29.97 in order to keep the audio in sync with the video. The sound is only going to play correctly at one frame rate... too slow and the wwoorrddss wwiilll ddrraagg oouuttt. Toofastandtheywillsoundfunnybecausethefrquencyofthesoundhaschanged. Makes sense doesn't it?
So it's NOT the audio that's out of sync... there is one and only one frame rate that will work for the audio... it the animation that's out of sync. Change the Flash doc frame rate to exactly match the audio... then sync the animation to match that.
Best wishes,
Adninjastrator -
I have an iMac Core Duo 2GHz (yes, first Intel iMac). I have Snow Leopard v10.6.8 (latest/last MacOS version I could load) with the most recent Security Update (2013-003).
I have two issues with Front Row:
• Some of the movie files will not show the images, but I can hear the audio.
• On other movies and TV shows they start fine, but within a few minutes the audio is out of sync with the images, running about 3-5 seconds ahead... Looks like a bad dub of a Japanese movie from the 60s.
Now, I know it's related to Front Row, because when I jump over to iTunes and start the same movie or TV show it begins where I left off in Front Row, but images are fine and audio is suddenly in-sync.
However, with Snow Leopard being 2 major upgrades back - 3 if you count the upcoming Mavericks release - I doubt this registers as a "brouhaha" on Apple's radar screens. Then, again, maybe the spirit of Steve won't tolerate this Microsoft-like quirk, even if my iMac is still chugging along after 7 years and multiple MacOS X upgrades & updates...I think I found my answer... or culprit. It has to do with Snow Leopard, and my iMac Core Duo, being the last of the dying breed of 32-bit systems, and that iTunes v11.x is 64-bit (heavily, at least)...
Guess I need to break down and replace my 7 year old iMac, even though it still works beautifully (otherwise). -
After Effects rendering the video with the audio out of sync
so, the thing is, i did the animation on flash, exported it, put it on after to edit audio and what not, everything looks fine, previews are good, so, lets render!... every time i render the final video have the audio out of sync, specially the audio that is already on the first video. the video its originally on 12 fps, if i change the interpretation to 24fps, everything get worse. any help?
ok, both Flash and After effect are CS6, i have a Lenovo Ideapad, can handle 64 bits
first i exported the video on .MOV from Flash CS6, without any problems
Then i finished the edition on After Effects, everything look good.
i have tried to render it on MOV, AVI, MP4 and the audio for the video that was exported from flash always get out of sync. i dont really move anything else -
CS4 - Can't edit - Jerky footage and audio out of sync
HW SPECS: DELL XPS 600
Dual Core 3.0
8 Gig
1 TB internal
8 TB external Raid 0 Approx 350 MBs
Nvidia 8800 GT latest drivers
Win7 - 64bit
CAPUTRE
Mini DV (Sony)
1. Capture through Black-Magic Design Infinity HDMI. Express Media - AVI Uncompressed.
Plays back fine through OS and Windows Media.
Load footage into Premiere CS4 and footage is jerky
2. Capture directly into Premiere CS4 using firewire.
Plays back fine through OS and Windows Media.
Load footage into Premiere CS4 and footage is jerky and Audio out of sync
3. Took capture from BMD and converted it using Cineform AspectHD
Plays back squished footage from 16x9 to std footage is jerky and Audio out of sync with moray (waves)
4. Took capture from BMD and converted it using Cineform ProspectHD (trial)
Plays back fine through OS and Windows Media.
Load footage into Premiere CS4 and footage is jerky and Audio out of sync with moray (waves)
I have read a number of forum treads and I'm at my wits end. I want to capture in HD edit it in real time and export to DVD, BlueRay and Flash. I have spent hours on support and updated every driver and configuration setting that I know. PLEASE will someone tell me what do I need to do to get this to work?
Is it the DELL? Do I go to a Mac? (Ironic that most adobe tutorials are on Macs) Do I need a different solution? I'm going crazy! Maybe it's me and I'm capturing and creating sequences all wrong. Please provide a workflow that is working for you. Let me know if you need more specifics. Thank you in advance!2. I did a search for HDVSplit and came up with this site. http://strony.aster.pl/paviko/hdvsplit.htm Is this correct? Is there a released version?
3. HW
· Premiere Pro
o Version number CS4
o Installation language English
o Updates applied 4.2.1
o Project/sequence settings
· Operating System
o Name Windows 7 64 bit
o Update/patch level Enterprise
o Installed language English
o Display resolution and color depth. 1920 X 1200 millions + colors
· CPU type and speed Intel Pentium D 3.0 Dual Core
· Amount of memory (RAM) 8 GB
· Video card
o Manufacturer NVida
o Model GeForce 8800 GT
o Driver version 8.17.11.9621 (1/11/2010)
o Number of monitors (displays) in use. 1
· Audio card
o Manufacturer Creative
o Model SB Xfi
o Driver version 6.0.1.1373 (6/3/2009)
· Each hard drive's capacity and space remaining
o Disk setup (partitions used, raid configuration, what is where for OS/projects/media/scratch/audio)
§ Internal uses NVidia nForce RAID Controller
· 4 disks (SATA 7200 250GB) Raid 0 Throughput 180 MPS
§ External uses Highpoint Rocket RAID SATA Controller
· 8 Disks (SATA 7200 1TB) Raid 5 Throughput 350MPS
CODEC - Used the Sherlock utility here's the output.
Codec Reporting Utility Output Text
Date and Time: 10-Mar-2010 20:50:13
System Information
Operating System = Unknown Professional (6.01.7600)
CPU Descriptor = Intel(R) Pentium(R) D CPU 3.00GHz
CPU Clock Speed = 2993 Mhz.
Total Memory = 4095 Mb.
DirectX Version = 10.0
WMI Version = 7600.16385
ACM Version = 5.00.0
Video Codecs
AVI Decompressor
FileVersion = 6.6.7600.16385 (win7_rtm.090713-1255)
CompanyName = Microsoft Corporation
FileDescription = DirectShow Runtime.
InternalName = Quartz.dll
LegalCopyright = © Microsoft Corporation. All rights reserved.
OriginalFileName = Quartz.dll.mui
ProductName = Microsoft® Windows® Operating System
ProductVersion = 6.6.7600.16385
AVI Draw
FileVersion = 6.6.7600.16385 (win7_rtm.090713-1255)
CompanyName = Microsoft Corporation
FileDescription = DirectShow Runtime.
InternalName = Quartz.dll
LegalCopyright = © Microsoft Corporation. All rights reserved.
OriginalFileName = Quartz.dll.mui
ProductName = Microsoft® Windows® Operating System
ProductVersion = 6.6.7600.16385
Blackmagic Design Decoder (DMO)
FileVersion = 7, 4, 0, 0
CompanyName = Blackmagic Design
FileDescription = DeckLink DirectShow DMO DLL
InternalName = VideoDMO
LegalCopyright = Copyright © 2003-2009 Blackmagic Design. All rights reserved.
OriginalFileName = dmobmd.dll
ProductName = DeckLink
ProductVersion = 7.4
CineForm HD Codec V4.3.4
FileVersion = 4, 3, 4, 298
CompanyName = CineForm Inc.
FileDescription = CineForm VFW CODEC
InternalName = CFHD
LegalCopyright = Copyright © 2001-2008 CineForm Inc.
OriginalFileName = cfhd.dll
ProductName = Aspect HD
ProductVersion = 5, 4, 6, 131
CineForm HD Decoder-2
FileVersion = 4, 3, 4, 298
CompanyName = CineForm Inc.
FileDescription = CineForm DirectShow Decoder
InternalName = CFDecode2
LegalCopyright = Copyright © 2001-2008 CineForm Inc.
OriginalFileName = CFDecode2.ax
ProductName = Aspect HD
ProductVersion = 5, 4, 6, 131
CineForm HD Encoder
FileVersion = 4, 3, 4, 298
CompanyName = CineForm Inc.
FileDescription = CineForm DirectShow Encoder
InternalName = CFEncode
LegalCopyright = Copyright © 2001-2008 CineForm Inc.
OriginalFileName = CFEncode.ax
ProductName = Aspect HD
ProductVersion = 5, 4, 6, 131
CineForm HD Encoder-2
FileVersion = 4, 3, 4, 298
CompanyName = CineForm Inc.
FileDescription = CineForm HD Encoder2
InternalName = CFEncoder2.ax
LegalCopyright = Copyright © 2001-2008 CineForm Inc.
OriginalFileName = CFEncoder2.ax
ProductName =
ProductVersion = 5, 4, 6, 131
CineForm V210 Decoder
FileVersion = 1, 0, 1, 3
CompanyName = CineForm Inc
FileDescription = V210 Decoder
InternalName = V210Decoder
LegalCopyright = Copyright © 2004 CineForm Inc
OriginalFileName = V210Decoder.ax
ProductName = Prospect HD
ProductVersion = 1, 0, 0, 18
CineForm YUV16 Converter
FileVersion = 1, 0, 2, 4
CompanyName = CineForm Inc.
FileDescription = YUV16Converter
InternalName = YUV16Converter
LegalCopyright = Copyright © 2001-2006 CineForm Inc.
OriginalFileName = YUV16Converter.ax
ProductName = Aspect HD
ProductVersion = 5, 4, 6, 131
Cinepak Codec by Radius
FileVersion = 1.10.0.11
CompanyName = Radius Inc.
FileDescription = Cinepak® Codec
InternalName = iccvid
LegalCopyright = Copyright © 1992-1995 Radius Inc., All Rights Reserved
OriginalFileName = iccvid.drv.mui
ProductName = Cinepak for Windows 32
ProductVersion = 1.10.0.0
Decklink MJPEG Compressor
FileVersion = 7, 4, 0, 0
CompanyName = Blackmagic Design
FileDescription = DeckLink DirectShow DLL
InternalName = DeckLink DirectShow Filter DLL
LegalCopyright = Copyright © 2003-2009 Blackmagic Design. All rights reserved.
OriginalFileName = Decklink.dll
ProductName = DeckLink
ProductVersion = 7.4
Decklink MJPEG Decompressor
FileVersion = 7, 4, 0, 0
CompanyName = Blackmagic Design
FileDescription = DeckLink DirectShow DLL
InternalName = DeckLink DirectShow Filter DLL
LegalCopyright = Copyright © 2003-2009 Blackmagic Design. All rights reserved.
OriginalFileName = Decklink.dll
ProductName = DeckLink
ProductVersion = 7.4
Decklink Video Capture
FileVersion = 7, 4, 0, 0
CompanyName = Blackmagic Design
FileDescription = DeckLink DirectShow DLL
InternalName = DeckLink DirectShow Filter DLL
LegalCopyright = Copyright © 2003-2009 Blackmagic Design. All rights reserved.
OriginalFileName = Decklink.dll
ProductName = DeckLink
ProductVersion = 7.4
Decrypt/Tag
FileVersion = 6.6.7600.16385 (win7_rtm.090713-1255)
CompanyName = Microsoft Corporation
FileDescription = XDSCodec & Encypter/Decrypter Tagger Filters.
InternalName = EncDec.dll
LegalCopyright = © Microsoft Corporation. All rights reserved.
OriginalFileName = EncDec.dll.mui
ProductName = Microsoft® Windows® Operating System
ProductVersion = 6.6.7600.16385
DV Splitter
FileVersion = 6.6.7600.16385 (win7_rtm.090713-1255)
CompanyName = Microsoft Corporation
FileDescription = DirectShow Runtime.
InternalName = Qdv.dll
LegalCopyright = © Microsoft Corporation. All rights reserved.
OriginalFileName = Qdv.dll.mui
ProductName = Microsoft® Windows® Operating System
ProductVersion = 6.6.7600.16385
DV Video Decoder
FileVersion = 6.6.7600.16385 (win7_rtm.090713-1255)
CompanyName = Microsoft Corporation
FileDescription = DirectShow Runtime.
InternalName = Qdv.dll
LegalCopyright = © Microsoft Corporation. All rights reserved.
OriginalFileName = Qdv.dll.mui
ProductName = Microsoft® Windows® Operating System
ProductVersion = 6.6.7600.16385
DV Video Encoder
FileVersion = 6.6.7600.16385 (win7_rtm.090713-1255)
CompanyName = Microsoft Corporation
FileDescription = DirectShow Runtime.
InternalName = Qdv.dll
LegalCopyright = © Microsoft Corporation. All rights reserved.
OriginalFileName = Qdv.dll.mui
ProductName = Microsoft® Windows® Operating System
ProductVersion = 6.6.7600.16385
Intel IYUV codec
FileVersion = 6.1.7600.16385 (win7_rtm.090713-1255)
CompanyName = Microsoft Corporation
FileDescription = Intel Indeo(R) Video YUV Codec
InternalName = iyuv_32.dll
LegalCopyright = Copyright Intel Corporation 1992-1997
OriginalFileName = iyuv_32.dll.mui
ProductName = Microsoft® Windows® Operating System
ProductVersion = 6.1.7600.16385
Intel IYUV codec
FileVersion = 6.1.7600.16385 (win7_rtm.090713-1255)
CompanyName = Microsoft Corporation
FileDescription = Intel Indeo(R) Video YUV Codec
InternalName = iyuv_32.dll
LegalCopyright = Copyright Intel Corporation 1992-1997
OriginalFileName = iyuv_32.dll.mui
ProductName = Microsoft® Windows® Operating System
ProductVersion = 6.1.7600.16385
Microsoft RLE
FileVersion = 6.1.7600.16385 (win7_rtm.090713-1255)
CompanyName = Microsoft Corporation
FileDescription = Microsoft RLE Compressor
InternalName = msrle32.dll
LegalCopyright = © Microsoft Corporation. All rights reserved.
OriginalFileName = msrle32.dll.mui
ProductName = Microsoft® Windows® Operating System
ProductVersion = 6.1.7600.16385
Microsoft Video 1
FileVersion = 6.1.7600.16385 (win7_rtm.090713-1255)
CompanyName = Microsoft Corporation
FileDescription = Microsoft Video 1 Compressor
InternalName = msvidc32.dll
LegalCopyright = © Microsoft Corporation. All rights reserved.
OriginalFileName = msvidc32.dll.mui
ProductName = Microsoft® Windows® Operating System
ProductVersion = 6.1.7600.16385
MJPEG Compressor
FileVersion = 6.6.7600.16385 (win7_rtm.090713-1255)
CompanyName = Microsoft Corporation
FileDescription = DirectShow Runtime.
InternalName = Quartz.dll
LegalCopyright = © Microsoft Corporation. All rights reserved.
OriginalFileName = Quartz.dll.mui
ProductName = Microsoft® Windows® Operating System
ProductVersion = 6.6.7600.16385
MJPEG Decompressor
FileVersion = 6.6.7600.16385 (win7_rtm.090713-1255)
CompanyName = Microsoft Corporation
FileDescription = DirectShow Runtime.
InternalName = Quartz.dll
LegalCopyright = © Microsoft Corporation. All rights reserved.
OriginalFileName = Quartz.dll.mui
ProductName = Microsoft® Windows® Operating System
ProductVersion = 6.6.7600.16385
MPEG Video Decoder
FileVersion = 6.6.7600.16385 (win7_rtm.090713-1255)
CompanyName = Microsoft Corporation
FileDescription = DirectShow Runtime.
InternalName = Quartz.dll
LegalCopyright = © Microsoft Corporation. All rights reserved.
OriginalFileName = Quartz.dll.mui
ProductName = Microsoft® Windows® Operating System
ProductVersion = 6.6.7600.16385
Mpeg4 Decoder DMO
FileVersion = 6.1.7600.16385 (win7_rtm.090713-1255)
CompanyName = Microsoft Corporation
FileDescription = Windows Media MPEG-4 Video Decoder
InternalName = mpg4dmod.dll
LegalCopyright = © Microsoft Corporation. All rights reserved.
OriginalFileName = mpg4dmod.dll
ProductName = Microsoft® Windows® Operating System
ProductVersion = 6.1.7600.16385
Mpeg4 Decoder DMO
FileVersion = 6.1.7600.16385 (win7_rtm.090713-1255)
CompanyName = Microsoft Corporation
FileDescription = Windows Media MPEG-4 Video Decoder
InternalName = mpg4dmod.dll
LegalCopyright = © Microsoft Corporation. All rights reserved.
OriginalFileName = mpg4dmod.dll
ProductName = Microsoft® Windows® Operating System
ProductVersion = 6.1.7600.16385
Mpeg43 Decoder DMO
FileVersion = 6.1.7600.16385 (win7_rtm.090713-1255)
CompanyName = Microsoft Corporation
FileDescription = Windows Media MPEG-4 Video Decoder
InternalName = mpg4dmod.dll
LegalCopyright = © Microsoft Corporation. All rights reserved.
OriginalFileName = mpg4dmod.dll
ProductName = Microsoft® Windows® Operating System
ProductVersion = 6.1.7600.16385
Mpeg43 Decoder DMO
FileVersion = 6.1.7600.16385 (win7_rtm.090713-1255)
CompanyName = Microsoft Corporation
FileDescription = Windows Media MPEG-4 Video Decoder
InternalName = mpg4dmod.dll
LegalCopyright = © Microsoft Corporation. All rights reserved.
OriginalFileName = mpg4dmod.dll
ProductName = Microsoft® Windows® Operating System
ProductVersion = 6.1.7600.16385
Mpeg4s Decoder DMO
FileVersion = 6.1.7600.16385 (win7_rtm.090713-1255)
CompanyName = Microsoft Corporation
FileDescription = Windows Media MPEG-4 S Video Decoder
InternalName = mp4sdmod.dll
LegalCopyright = © Microsoft Corporation. All rights reserved.
OriginalFileName = mp4sdmod.dll.mui
ProductName = Microsoft® Windows® Operating System
ProductVersion = 6.1.7600.16385
Mpeg4s Decoder DMO
FileVersion = 6.1.7600.16385 (win7_rtm.090713-1255)
CompanyName = Microsoft Corporation
FileDescription = Windows Media MPEG-4 S Video Decoder
InternalName = mp4sdmod.dll
LegalCopyright = © Microsoft Corporation. All rights reserved.
OriginalFileName = mp4sdmod.dll.mui
ProductName = Microsoft® Windows® Operating System
ProductVersion = 6.1.7600.16385
MSScreen 9 encoder DMO
FileVersion = 6.1.7600.16385 (win7_rtm.090713-1255)
CompanyName = Microsoft Corporation
FileDescription = Windows Media Screen Encoder
InternalName = wmvsencd.dll
LegalCopyright = © Microsoft Corporation. All rights reserved.
OriginalFileName = wmvsencd.dll
ProductName = Microsoft® Windows® Operating System
ProductVersion = 6.1.7600.16385
MSScreen 9 encoder DMO
FileVersion = 6.1.7600.16385 (win7_rtm.090713-1255)
CompanyName = Microsoft Corporation
FileDescription = Windows Media Screen Encoder
InternalName = wmvsencd.dll
LegalCopyright = © Microsoft Corporation. All rights reserved.
OriginalFileName = wmvsencd.dll
ProductName = Microsoft® Windows® Operating System
ProductVersion = 6.1.7600.16385
PBDA DTFilter
FileVersion = 6.6.7600.16385 (win7_rtm.090713-1255)
CompanyName = Microsoft Corporation
FileDescription = PTFilter & Encypter/Decrypter Tagger Filters.
InternalName = CPFilters.dll
LegalCopyright = © Microsoft Corporation. All rights reserved.
OriginalFileName = CPFilters.dll.mui
ProductName = Microsoft® Windows® Operating System
ProductVersion = 6.6.7600.16385
VBI Surface Allocator
FileVersion = 6.1.7600.16385 (win7_rtm.090713-1255)
CompanyName = Microsoft Corporation
FileDescription = VBI Surface Allocator Filter
InternalName = VBISURF.AX
LegalCopyright = © Microsoft Corporation. All rights reserved.
OriginalFileName = VBISURF.AX
ProductName = Microsoft® Windows® Operating System
ProductVersion = 6.1.7600.16385
Video Port Manager
FileVersion = 6.6.7600.16385 (win7_rtm.090713-1255)
CompanyName = Microsoft Corporation
FileDescription = DirectShow Runtime.
InternalName = Quartz.dll
LegalCopyright = © Microsoft Corporation. All rights reserved.
OriginalFileName = Quartz.dll.mui
ProductName = Microsoft® Windows® Operating System
ProductVersion = 6.6.7600.16385
WMV Screen decoder DMO
FileVersion = 6.1.7600.16385 (win7_rtm.090713-1255)
CompanyName = Microsoft Corporation
FileDescription = Windows Media Screen Decoder
InternalName = wmvsdecd.dll
LegalCopyright = © Microsoft Corporation. All rights reserved.
OriginalFileName = wmvsdecd.dll
ProductName = Microsoft® Windows® Operating System
ProductVersion = 6.1.7600.16385
WMV Screen decoder DMO
FileVersion = 6.1.7600.16385 (win7_rtm.090713-1255)
CompanyName = Microsoft Corporation
FileDescription = Windows Media Screen Decoder
InternalName = wmvsdecd.dll
LegalCopyright = © Microsoft Corporation. All rights reserved.
OriginalFileName = wmvsdecd.dll
ProductName = Microsoft® Windows® Operating System
ProductVersion = 6.1.7600.16385
WMVideo Decoder DMO
FileVersion = 6.1.7600.16385 (win7_rtm.090713-1255)
CompanyName = Microsoft Corporation
FileDescription = Windows Media Video Decoder
InternalName = wmvdecod.dll
LegalCopyright = © Microsoft Corporation. All rights reserved.
OriginalFileName = wmvdecod.dll
ProductName = Microsoft® Windows® Operating System
ProductVersion = 6.1.7600.16385
WMVideo Decoder DMO
FileVersion = 6.1.7600.16385 (win7_rtm.090713-1255)
CompanyName = Microsoft Corporation
FileDescription = Windows Media Video Decoder
InternalName = wmvdecod.dll
LegalCopyright = © Microsoft Corporation. All rights reserved.
OriginalFileName = wmvdecod.dll
ProductName = Microsoft® Windows® Operating System
ProductVersion = 6.1.7600.16385
WMVideo8 Encoder DMO
FileVersion = 6.1.7600.16385 (win7_rtm.090713-1255)
CompanyName = Microsoft Corporation
FileDescription = Windows Media Video Encoder
InternalName = wmvxencd.dll
LegalCopyright = © Microsoft Corporation. All rights reserved.
OriginalFileName = wmvxencd.dll
ProductName = Microsoft® Windows® Operating System
ProductVersion = 6.1.7600.16385
WMVideo8 Encoder DMO
FileVersion = 6.1.7600.16385 (win7_rtm.090713-1255)
CompanyName = Microsoft Corporation
FileDescription = Windows Media Video Encoder
InternalName = wmvxencd.dll
LegalCopyright = © Microsoft Corporation. All rights reserved.
OriginalFileName = wmvxencd.dll
ProductName = Microsoft® Windows® Operating System
ProductVersion = 6.1.7600.16385
WMVideo9 Encoder DMO
FileVersion = 6.1.7600.16385 (win7_rtm.090713-1255)
CompanyName = Microsoft Corporation
FileDescription = Windows Media Video 9 Encoder
InternalName = wmvencod.dll
LegalCopyright = © Microsoft Corporation. All rights reserved.
OriginalFileName = wmvencod.dll
ProductName = Microsoft® Windows® Operating System
ProductVersion = 6.1.7600.16385
WMVideo9 Encoder DMO
FileVersion = 6.1.7600.16385 (win7_rtm.090713-1255)
CompanyName = Microsoft Corporation
FileDescription = Windows Media Video 9 Encoder
InternalName = wmvencod.dll
LegalCopyright = © Microsoft Corporation. All rights reserved.
OriginalFileName = wmvencod.dll
ProductName = Microsoft® Windows® Operating System
ProductVersion = 6.1.7600.16385
Audio Codecs
"What U Hear" (Creative SB X-Fi
FileVersion = 6.6.7600.16385 (win7_rtm.090713-1255)
CompanyName = Microsoft Corporation
FileDescription = DirectShow Runtime.
InternalName = QCap.dll
LegalCopyright = © Microsoft Corporation. All rights reserved.
OriginalFileName = QCap.dll.mui
ProductName = Microsoft® Windows® Operating System
ProductVersion = 6.6.7600.16385
ACM Wrapper
FileVersion = 6.6.7600.16385 (win7_rtm.090713-1255)
CompanyName = Microsoft Corporation
FileDescription = DirectShow Runtime.
InternalName = Quartz.dll
LegalCopyright = © Microsoft Corporation. All rights reserved.
OriginalFileName = Quartz.dll.mui
ProductName = Microsoft® Windows® Operating System
ProductVersion = 6.6.7600.16385
Auxiliary (Creative SB X-Fi)
FileVersion = 6.6.7600.16385 (win7_rtm.090713-1255)
CompanyName = Microsoft Corporation
FileDescription = DirectShow Runtime.
InternalName = QCap.dll
LegalCopyright = © Microsoft Corporation. All rights reserved.
OriginalFileName = QCap.dll.mui
ProductName = Microsoft® Windows® Operating System
ProductVersion = 6.6.7600.16385
CCITT A-Law
FileVersion = 6.1.7600.16385 (win7_rtm.090713-1255)
CompanyName = Microsoft Corporation
FileDescription = Microsoft CCITT G.711 (A-Law and u-Law) CODEC for MSACM
InternalName = Microsoft CCITT G.711 (A-Law and u-Law) CODEC for MSACM
LegalCopyright = © Microsoft Corporation. All rights reserved.
OriginalFileName = msg711.acm.mui
ProductName = Microsoft® Windows® Operating System
ProductVersion = 6.1.7600.16385
CCITT u-Law
FileVersion = 6.1.7600.16385 (win7_rtm.090713-1255)
CompanyName = Microsoft Corporation
FileDescription = Microsoft CCITT G.711 (A-Law and u-Law) CODEC for MSACM
InternalName = Microsoft CCITT G.711 (A-Law and u-Law) CODEC for MSACM
LegalCopyright = © Microsoft Corporation. All rights reserved.
OriginalFileName = msg711.acm.mui
ProductName = Microsoft® Windows® Operating System
ProductVersion = 6.1.7600.16385
Decklink Audio Capture
FileVersion = 7, 4, 0, 0
CompanyName = Blackmagic Design
FileDescription = DeckLink DirectShow DLL
InternalName = DeckLink DirectShow Filter DLL
LegalCopyright = Copyright © 2003-2009 Blackmagic Design. All rights reserved.
OriginalFileName = Decklink.dll
ProductName = DeckLink
ProductVersion = 7.4
Decrypt/Tag
FileVersion = 6.6.7600.16385 (win7_rtm.090713-1255)
CompanyName = Microsoft Corporation
FileDescription = XDSCodec & Encypter/Decrypter Tagger Filters.
InternalName = EncDec.dll
LegalCopyright = © Microsoft Corporation. All rights reserved.
OriginalFileName = EncDec.dll.mui
ProductName = Microsoft® Windows® Operating System
ProductVersion = 6.6.7600.16385
Digital-In (Creative SB X-Fi)
FileVersion = 6.6.7600.16385 (win7_rtm.090713-1255)
CompanyName = Microsoft Corporation
FileDescription = DirectShow Runtime.
InternalName = QCap.dll
LegalCopyright = © Microsoft Corporation. All rights reserved.
OriginalFileName = QCap.dll.mui
ProductName = Microsoft® Windows® Operating System
ProductVersion = 6.6.7600.16385
GSM 6.10
FileVersion = 6.1.7600.16385 (win7_rtm.090713-1255)
CompanyName = Microsoft Corporation
FileDescription = Microsoft GSM 6.10 Audio CODEC for MSACM
InternalName = Microsoft GSM 6.10 Audio CODEC for MSACM
LegalCopyright = © Microsoft Corporation. All rights reserved.
OriginalFileName = msgsm32.acm.mui
ProductName = Microsoft® Windows® Operating System
ProductVersion = 6.1.7600.16385
IMA ADPCM
FileVersion = 6.1.7600.16385 (win7_rtm.090713-1255)
CompanyName = Microsoft Corporation
FileDescription = IMA ADPCM CODEC for MSACM
InternalName = IMA ADPCM CODEC for MSACM
LegalCopyright = © Microsoft Corporation. All rights reserved.
OriginalFileName = imaadp32.acm.mui
ProductName = Microsoft® Windows® Operating System
ProductVersion = 6.1.7600.16385
Line-In (Creative SB X-Fi)
FileVersion = 6.6.7600.16385 (win7_rtm.090713-1255)
CompanyName = Microsoft Corporation
FileDescription = DirectShow Runtime.
InternalName = QCap.dll
LegalCopyright = © Microsoft Corporation. All rights reserved.
OriginalFileName = QCap.dll.mui
ProductName = Microsoft® Windows® Operating System
ProductVersion = 6.6.7600.16385
Microphone (Creative SB X-Fi)
FileVersion = 6.6.7600.16385 (win7_rtm.090713-1255)
CompanyName = Microsoft Corporation
FileDescription = DirectShow Runtime.
InternalName = QCap.dll
LegalCopyright = © Microsoft Corporation. All rights reserved.
OriginalFileName = QCap.dll.mui
ProductName = Microsoft® Windows® Operating System
ProductVersion = 6.6.7600.16385
Microsoft ADPCM
FileVersion = 6.1.7600.16385 (win7_rtm.090713-1255)
CompanyName = Microsoft Corporation
FileDescription = Microsoft ADPCM CODEC for MSACM
InternalName = Microsoft ADPCM CODEC for MSACM
LegalCopyright = © Microsoft Corporation. All rights reserved.
OriginalFileName = msadp32.acm.mui
ProductName = Microsoft® Windows® Operating System
ProductVersion = 6.1.7600.16385
MP3 Decoder DMO
FileVersion = 6.1.7600.16385 (win7_rtm.090713-1255)
CompanyName = Microsoft Corporation
FileDescription = Microsoft MP3 Decoder DMO
InternalName = mp3dmod.dll
LegalCopyright = © Microsoft Corporation. All rights reserved.
OriginalFileName = mp3dmod.dll
ProductName = Microsoft® Windows® Operating System
ProductVersion = 6.1.7600.16385
MP3 Decoder DMO
FileVersion = 6.1.7600.16385 (win7_rtm.090713-1255)
CompanyName = Microsoft Corporation
FileDescription = Microsoft MP3 Decoder DMO
InternalName = mp3dmod.dll
LegalCopyright = © Microsoft Corporation. All rights reserved.
OriginalFileName = mp3dmod.dll
ProductName = Microsoft® Windows® Operating System
ProductVersion = 6.1.7600.16385
MPEG Audio Decoder
FileVersion = 6.6.7600.16385 (win7_rtm.090713-1255)
CompanyName = Microsoft Corporation
FileDescription = DirectShow Runtime.
InternalName = Quartz.dll
LegalCopyright = © Microsoft Corporation. All rights reserved.
OriginalFileName = Quartz.dll.mui
ProductName = Microsoft® Windows® Operating System
ProductVersion = 6.6.7600.16385
MPEG Layer-3
FileVersion = 1, 9, 0, 0401
CompanyName = Fraunhofer Institut Integrierte Schaltungen IIS
FileDescription = MPEG Layer-3 Audio Codec for MSACM
InternalName = l3codec.acm
LegalCopyright = Copyright © 1996-1999 Fraunhofer Institut Integrierte Schaltungen IIS
OriginalFileName = l3codec.acm.mui
ProductName = MPEG Layer-3 Audio Codec for MSACM
ProductVersion = 1, 0, 0, 0
PBDA DTFilter
FileVersion = 6.6.7600.16385 (win7_rtm.090713-1255)
CompanyName = Microsoft Corporation
FileDescription = PTFilter & Encypter/Decrypter Tagger Filters.
InternalName = CPFilters.dll
LegalCopyright = © Microsoft Corporation. All rights reserved.
OriginalFileName = CPFilters.dll.mui
ProductName = Microsoft® Windows® Operating System
ProductVersion = 6.6.7600.16385
PCM
FileVersion = 6.1.7600.16385 (win7_rtm.090713-1255)
CompanyName = Microsoft Corporation
FileDescription = IMA ADPCM CODEC for MSACM
InternalName = IMA ADPCM CODEC for MSACM
LegalCopyright = © Microsoft Corporation. All rights reserved.
OriginalFileName = imaadp32.acm.mui
ProductName = Microsoft® Windows® Operating System
ProductVersion = 6.1.7600.16385
WM Speech Encoder DMO
FileVersion = 6.1.7600.16385 (win7_rtm.090713-1255)
CompanyName = Microsoft Corporation
FileDescription = Windows Media Audio Voice Encoder
InternalName = wmspdmoe.dll
LegalCopyright = © Microsoft Corporation. All rights reserved.
OriginalFileName = wmspdmoe.dll
ProductName = Microsoft® Windows® Operating System
ProductVersion = 6.1.7600.16385
WM Speech Encoder DMO
FileVersion -
Audio out of sync with elemental plugin, and slower than my i7!!!
Maaannn!!
I just got a PNY nvidia quadro 1800 with elemental accellerator plugin. I just transcoded 2 hours of HDV straight from premiere 4 with Adobe Media Encoder using the Elemental codec and the audio is out of sync. It plays out of sync on the Blu Ray disk, and in Encore4. The audio is perfectly synced in Premiere. I just did another project a week ago without the Elemental, using the default Main Concept encoder and the audio is perfect. I am pretty sure I have the latest version of the Elemental Accellerator because there is a button to check for updates and it says there are no updates available. Does anybody know what is wrong here?.
The transitions are getting messed up. I can see a small section with the audio synced, then the video repeats after a second throwing them out of sync. I also suspect that the Elemental accelerator does not process any faster than the default h.264 for Blu Ray encoder. I hope I did not waste my money on this nvidia quadro 1800..
Whoooaa! I just woke up and checked the transcoding time.. To transcode approximately 2 hours of HDV it took 6:35 (hr:mm) with the elemental accellerator and it took 5:09 with my i7 920 chip!! Was that nvidia card a waste of money, or what?!!! Between the slower speed and the audio out of sync, I'd say I made a BIG misteak.. Does anybody want to buy a PNY nvidia quadro 1800? it'll be on ebay very soon..
Win7 64bit, Master Collection 4, i7 2.66 Ghz, Kingston Triple Channel DDR3 1600Mhz 6Gb, ASUS P6T, PNY nvidia quadro 1800.....Thanks Neil,
I don't think my audio interface has anything to do with it.. I am using Adobe Media Encoder for the export and the Audio interface's latency has nothing to do with it.. I see the source of the problem but not the solution.. The Elemental plugin is not working properly with the transitions in Premiere. The transitions are visibly botched and the sound is in sync for a partial second of each clip, then the video skips backward as the sound keeps playing. This happens on every clip after the transition.
Whatever you were talking about might have to do with some kind of real time export, but to where? I think Premiere might have some auto plugin delay compensation for audio tracks.. I dont think you even read my post.. My MOTU 896 Mk3 audio interface has a 128 sample buffer leaving a few milliseconds of latency, and I can set it as low as 64.. This still has nothing to do with my problem.. Thanks for your input..
I am curious to know what you thought I was capturing elemental streams and audio from my interface in real time to.. I was unaware of anything that works like that in this type of editing..
The bottom line is that my i7 chip gets the job done much faster than the quadro 1800, and that's a shame that I spent the money on the 1800.. On top of that it doesn't even work properly!! -
Audio out of sync with waveform
We have 3 new computers at work with Final Cut Studio on all of them. Since we got them 2 or 3 weeks ago everything has been fine except today. 2 of them all of a sudden get audio out of sync. You can tell the audio waveform is inline with the video but the audio coming through the speakers are off and get worse as the clip plays. We are recording with xd1 cameras and importing using a card reader and using the xd transfer software. The actual .mov file when played outside of FCP is fine, it's just when it's imported into FCP that the problem occurs. I even have a project that I finished 2 weeks ago, it was fine at the time but when I played it today the audio was all of a sudden off. I've checked the settings and I'm clueless as to what to do. Any suggestions?
I don't know if this makes a difference but the computer that this problem isn't happening too has been updated online. The other 2 haven't. We don't have internet access all the time. I'm thinking an update might cure the problem but we didn't have time to update it today.I think I figured out what the problem is. We have AJA Kona card installed in the computer but we are at a temporary location so setting the FCP to AJA Kona card but listening through the regular computer speaker output is what is causing the problem. When I setup the FCP to XDCAM 1060i it works fine.
-
My videos play with video/audio out of sync in itunes, what gives?
All of my itunes video library, including those purchased from the itunes store, play with the video/audio out of sync. However, if I use Quicktime, they play fine. I just noticed this recently with the latest update to itunes.
I found the solution using google search. Basically you have to downgrade your itunes software to version 10.7 and rebuild your library. Just type in iTunes audio/video out of sync on google search and you will find the solution I am talking about. I didn't think it would actually work because supposedly apple knows what it's doing but not in this case. Why they would put out a new version of itunes that makes none of your videos play right, even ones you purchased from itunes is beyond me but I'm sticking with version 10.7 for as long as I can.
-
FCP Send To STP Multitrack Project - Audio out of sync
I'm editing video in FCP and sent the audio as a multitrack project to STP and upon opening it in STP the audio is already out of sync - even without touching it. I thought maybe it would go back in sync upon sending it back to FCP, but it stays out of sync there too.
It appears I'm having the same problem as this person who created a screencast on how to fix it: http://www.screencast.com/users/hatuckett/folders/Default/media/d781e0cb-8689-44 4e-9c49-7e8592e86052 I tried their solution and for whatever reason it doesn't work for me.
This isn't just happening with 1 video or project, it's happening with ALL of them. All of my video is PAL. I'm using PAL video and I've made certain in STP in the Project Preferences setting to change the videos frames per second to 23.98. Yet, the audio remains out of sync. Is there anything else I can do to insure that the audio file when imported and exported in and out of STP remains in sync with the original FCP video?
I am using Soundtrack Pro 3.0.1 and FCP 7.0.2. Thanks in advance.There is a mismatch somewhere which is causing this sync problem.
Next thing to try - does your STP project sample rate match the sample rate of the audio in your FCP project?
In the STP project, on the projects tab, is "none" selected in the pullup/pulldown section, both audio and video?
In some cases, changing a frame rate can change the speed of the video, causing sync problems, so the earlier discussion about frame rates wasn't just semantics or terminology issues. I understand your frustration, but I was trying to help by ruling frame rate problems out. -
Audio out of sync on source file
So I've captured 4 tapes from an event. The 1st two tapes captured produced a quicktime file with the audio out of sync. The last two tapes are fine. The sample rates match both the capture settings and sequence settings and "make new clip on timecode break" is turned on. "Abort capture on dropped frame" was left off.
I set up a new scratch disk after already capturing all the footage. I moved everything (render files, capture scratch, audio render, etc.) from one folder to another. I had suspected this being the problem until realizing the problem was not only on the timeline, but also on the source files opening in quicktime player.
I've done searches and everything, but cant seem to find anything helpful. Could dropped frames be doing this?
~ JimFirst, scroll to the right in your browser and make sure the audio 'format' is 48.0kHz...just to check.
What is your media source...DV, HDV, DVCPro...etc?
Is the sync issue a consistent amount, or does it fall further out of sync over time?
If there were timecode breaks or any other reason that caused the capture to 'drop frames', then chances are your setting for 'make new clip on timecode break' is the culprit. FCP will continue to capture beyond the break, but with improper TC.
If the sync just goes further out of sync over time, then it could be the audio was captured at 47.998 or 48.002. This can usually be fixed by 'Exporting as aiff - 48khz/16bit.
Drifting out of sync can be an issue with long captures as well. Might consider breaking captures down to 20 minute chunks.
Post back with info/answers.
K -
How do i replace video without putting all of audio out of sync?
hello,
i am trying to replace a video clip with an alternative clip while keeping the original audio, but everytime i select a clip to replace, it does so but puts the audio out of sync starting from where i inserted the clip...help!
Thanks,
stevenFirst, go into iMovie/Preferences and make sure that the Advanced Tools are enabled.
Next drag and drop the alternate clip from the Event to the frame in the project where you want it to start. A pop-up menu will come up. Choose "Cutaway". -
We are trying to output a 70 minute documentary onto either a mini-dv in the Canon GL2 or to Quicktime movie to burn to a DVD . The entire project is in synch until output...then audio out of sync by roughly 6 frames. We go back to our timeline, resynch it, and then it goes out of sync again when we try to out put it. And of course we are on deadline. Help.
When you're viewing it in FCP, how are you seeing and hearing it? The correct way is to view AND listen on external devices (TV monitor & speakers).
If you're watching on an external TV monitor but listening to the computer's speakers (which a lot of people seem to do), it will appear out of sync when it really isn't. If you make adjustments based on that, you're actually creating the sync problem yourself.
-DH -
Audio out of sync after importing .MOV
Experiencing audio out-of-sync issues after importing a .mov clip into Premiere Pro.
The .mov clip causing the problem does not have a problem when played with quicktime or vlc: The audio matches the video perfectly.
Adobe Premiere Pro CC 7.2.1 (4) on OSX 10.9.1
Open Premiere, New Project ... > OK > Import the single video clip (whether by dragging into the app, or using the Media Browser). Start playing the clip in the Source monitor, scrub forward. Result: audio and video are way out of sync.
The .mov clip causing the problem was exported from Silverback app. http://silverbackapp.com/
Details about the .mov clip, via Media Inspector app:
============================================================
General
Complete name : /Users/jukeboxhero/20140203.mov
Format : MPEG-4
Format profile : QuickTime
Codec ID : qt
File size : 638 MiB
Duration : 34mn 46s
Overall bit rate : 2 566 Kbps
Encoded date : UTC 2014-02-04 06:52:45
Tagged date : UTC 2014-02-06 15:55:40
Writing library : Apple QuickTime
Video
ID : 2
Format : AVC
Format/Info : Advanced Video Codec
Format profile : [email protected]
Format settings, CABAC : No
Format settings, ReFrames : 2 frames
Format settings, GOP : M=2, N=30
Codec ID : avc1
Codec ID/Info : Advanced Video Coding
Duration : 34mn 46s
Bit rate mode : Variable
Bit rate : 2 449 Kbps
Width : 1 920 pixels
Height : 1 080 pixels
Display aspect ratio : 16:9
Frame rate mode : Variable
Frame rate : 18.969 fps
Minimum frame rate : 6.522 fps
Maximum frame rate : 19.355 fps
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Bits/(Pixel*Frame) : 0.062
Stream size : 609 MiB (95%)
Language : English
Encoded date : UTC 2014-02-04 06:52:46
Tagged date : UTC 2014-02-04 15:27:35
Color primaries : BT.709-5, BT.1361, IEC 61966-2-4, SMPTE RP177
Transfer characteristics : BT.709-5, BT.1361
Matrix coefficients : BT.709-5, BT.1361, IEC 61966-2-4 709, SMPTE RP177
Audio
ID : 1
Format : AAC
Format/Info : Advanced Audio Codec
Format profile : LC
Codec ID : 40
Duration : 34mn 45s
Bit rate mode : Constant
Bit rate : 104 Kbps
Nominal bit rate : 128 Kbps
Channel(s) : 2 channels
Channel positions : Front: L R
Sampling rate : 44.1 KHz
Compression mode : Lossy
Stream size : 25.9 MiB (4%)
Language : English
Encoded date : UTC 2014-02-04 06:52:45
Tagged date : UTC 2014-02-04 15:27:35
============================================================
The video imports perfectly into Final Cut Pro 10.1.1
I have Premiere Pro trial and Final Cut Pro trial. If there's no fix or easy work-around, I will have to ditch Premiere.>Frame rate mode : Variable
No version of Premiere does "well" with Variable Frame Rate
Below is about iphone, but may help
Some people find that Iphone won't edit easily because it uses a variable frame rate
- A possible fix in message #22 http://forums.adobe.com/thread/934466 -
Audio out of sync after exporting into Quicktime using current settings.
Quicktime file has audio out of sync when I export to quicktime movie using current settings.
Ok for about the first few minutes then, out of sync after about 10 minutes.
I shot the footage on tape with my Sony HVR-Z7u.
My Sequence setting is the same as the format of the footage as shown below.
Pixel Aspect Ratio: HD 1440x1080
Editing Time base: 23.98
Quicktime video settings: Compressor: HDV 1080p24
Audio Settings: Rate 48 KHz
Depth: 16bit
Clip format:
Pixel Aspect Ratio: HD 1440x1080
Vid Rate: 23.98
Compressor: HDV 1080p24
Audio Rate 48 KHz
Audio Format: 16bitI recently moved and both of my editing machines were unplugged for a couple of days until I could get them set up. After turning them back on, the problem had disappeared. Perhaps leaving the system unplugged had allowed some of the internal components to reset? That's the only thing I can think of. At any rate, the issue is gone.
-
Audio Out of Sync - Why and How to Correct
I nested two 90 minute clips from 2 separate cameras which were both shot in AVCHD. I am using Premiere CS 5.5 . As a former FCP editor, whenever audio went out of sync, a message in FCP came up immediately and told you the audio was out of sync and it was an easy fix. How come Premiere is minus such an important feature?
I shoot stage productions where there may be music but no dialogue so chercking sync becomes rather difficult. After finishing a 2 hour video, I found the audio was out of sync in the nested sequences. Is there any way to auto resync the audio automatically?
Seems to me that Premiere Pro is a sub Pro App if simple audio sync is so hard to maintain in nested sequences. Makes nesting a sequence a waste of time if you have to redo the edit as a reslut of audio out of sync.Hello Everyone,
Has anyone found a solution to this BUG?
This happens to me all the time with Adobe Premier CS6.
It is an obvious Software BUG that needs to be corrected. I am a TV show editor.
I have had this happen to me 4 different times. You don't have to do anything special. The video with sound runs perfectly with any other product on your computer..but goes out of sync in Premier. I have tried cleaning up the Media Cache .cfa and .pek waveforms. No joy. I have tried relinking the media. No joy. I have tried moving the project and renaming and relinking. No joy. Rendering No joy. Setting the media cache to local area. No joy.
If this had happened to me just once, I would say, I have done something wrong. It has happened now in 4 different projects on four different shows. I have produced and released over 100 shows to TV.
I have checked everything, I have reloaded footage off camera. I have checked and bought new cables. I have checked codecs, frame rates, loaded into other products. All fine. I just wish Adobe engineers would do this same type of debugging of their software.
I use to work for Hewlett Packard Software division. We were taught to alfa test, beta test and not release until bug rates
were at certain levels. Some bugs just have get through or you never get to release. But this bug really hits your productivity in a major way. You have to resync BY HAND each cut... all your sound after hours and days and weeks of getting it perfect. Then in a split second. FFFFDDDDDDDDD
I have been editing with Premier for 6 years.... It only seems to be since I have upgraded to CS6. And I have to re-link by hand to correct the problem. I sync on electronic clapper board number and sound - almost impossibe not to sync. I will be working away happily, cut out some footage go to my next grab..BANG out of sync. That simple.
All I know is that it happens and for ADOBE to really be a true professional editing suite in the the TV/Movie world.... This is just not on. By any chance have they released a patch or bug fix to repair this. I have spent over 3 weeks edting a television show again .......needing to go to air in less than three weeks and all of a sudden between one cut and delete.. the sound is out of sync across the whole interview. JUST NOT ON. I have spent 4 hours now..none productive hours trying to resync the sound, find solutions on the website via forums. Some ideas have been really good and I have tried them. None have worked. Still unsynced. Almost completed show I now have to re-sync by hand. At this point, I am thinking FCP is looking good. I cannot stand this loss of productivity and time.
This is not the only forum complaining about this..that should tell you something.
Maybe you are looking for
-
How to open a html file in a region on same page
Hi, I am trying to create a page where I have 2 regions. The left region,"lef_reg" has been created using HTML contains some text values. The right region, "rig_reg" is blank. I want that if a user clicks on a link on the left region (lef_reg) then a
-
How to embed widget code in a page or template?
Hi All - I have been using Dreamweaver 8 for a little over a year and still feel like I'm stumbling along... The idea of Widgets is fairly new to me but from all the "Free Widget" sites, I got the idea that it was as easy as cut & paste into the page
-
MY VIDEOS DONT HAVE SOUND PLEASE HELP ME
HI I´M NEW ABOUT IPOD... I TRY TO PUT VIDEOS IN MY IPOD 30G BUT SOMETHING GOS WRONG, I DO THIS... ADD A VIDEO, CONVERTING TO IPOD, I UPDATE HIM, BUT WHEM I LISTEN IN THE IPOD THE VIDEO DONT HAVE SOUND... ANY ONE CAN HELP ME ?
-
Вітаю! I live in Dnipropetrovsk, Ukraine. I`m using iPhone & realy like it. But its capabilities are severely limited due to the lack of applications in the Ukrainian language which are available to users in English, German, etc. appstores in their c
-
Hi Gurus. I created one ztable and also table mainenance . but in sm30 the table is not showed blank screen is showing. here I am not able to create entries. please give me the reply. Regards, Shashikumar.G