Flash Audio Player in Blog Help Needed

Hello...
I am a Mac user, OS X 10.4.11.
I use Flash Audio Players on my web pages to stream my radio station. I installed the Flash Player on my Blog, but after a month or so it stopped working. I have tried countless versions of the player and varying code, but cannot get it to work.
Note, I host my own Flash Player so visitors don't need to install it. Further, I use a free audio streaming service which requires their ad code be activated on the web page for the audio to stream. (Anytime, the stream server is reset or interrupted the web page must be refreshed to reactivate the audio stream. A bit of a hassle, but you can't beat FREE!) I have installed this code at the bottom of any of my web pages streaming audio and at the bottom of my Blog. And again, initially the Flash Player streamed the audio fine on the Blog.
Here are the web pages to visit to review situation:
Stevo In Yr Stereo Radio "Mind-Altering Music" This is where you can view the source for the code I use to stream audio with the Flash Player.
Nightmare City Halloween Blog This is where the code is no longer working.
I stream audio with the following IP & Port: 87.98.170.118:8424
When the Flash Player HTML Code ask for the "MP3 URL" how might I configure the IP & Port to work on the Blog?
Finally, I do use a redirect URL when necessary via DynDNS.com, but even my redirect URL fails to work in the Blog.
Any insight and assistance regarding this matter is greatly appreciated. Thank you.
Stevo

If I'm in the wrong place asking this question can anyone direct me to the proper place to ask where I will encounter someone with a solution? Thank you.

Similar Messages

Flash audio player script played MP3 sped-up for only one user

Hello all,
My first post here; I hope this is the right forum for a
general/newbie
Flash question.
I'm using a Flash audio player script that I got here:
http://www.1pixelout.net/code/audio-player-wordpress-plugin/
Here it is on the web page, a few lines down from the top of
the blog post:
http://mojomom.blogspot.com/2008/06/mojo-mom-podcast-momma-zen.html
It's an MP3 of a podcast which has been working fine
everywhere I've tested
it. But we just heard from someone who says that when she
tried it, the
audio was sped up so that "the voices were like chipmunks".
Anyone have any idea what might have caused that?
Thanks very much in advance for any help,
Patty Ayers | www.WebDevBiz.com
Free Articles on the Business of Web Development
Web Design Contract, Estimate Request Form, Estimate
Worksheet

I've reinstalled flash and checked that I have the latest version but this is getting ridiculous
Everytime I want to use skype or itunes or iplayer, I have to log in as the other user, close down all their web browsers, then go back to my account to get it to work, much to the annoyance of the other user.
Flash now: 11.1.102.55
OSX: 10.6.8

How to make simple flash audio player?

I have some mp3 files in Quicktime format that I would like to put on a webpage. Each file, when clicked, come up in a separate page and play.
My question: how can I modify these page with mp3 file so I can add some explanatory text to the page? Right now the site visitor just clicks on the link, a new page comes up and plays the file. But I can't modify what comes up. Nor can I even see Page Source.
If there is a better way to implement my audio files to visitors can play the file and see the explanatory text at the same time, I would appreciate your suggestions.
The specific page which contains the links is: http://www.englishjapaneseonlinedictionary.com/dictionary_my_Japanese_teacher.ht m
If you click on any of the files you will see the problem--I can't modify the page which comes up and plays the audio file
Someone suggested I make a flash audio player to embed in a page. I know nothing about Flash. Can anyone direct me to some resources where I could make a flash player to play my files and that would allow me to add some other textual content to a webpage?
Many thanks in advance,
Jane

The flash add-on is not available for Safari on iOS. Never has been and in fact Adobe has ceased support for flash for mobile devices in general. Your options, depending on the specific sites:
See if the site or sites in question have their own apps availabel in teh app store
Look into some browsers such as Puffin adn iSwifter (there are others, I beleive). These browsers use a third server site to translate the flsh content into a form that the iPAd can use and restreams them to you. They may not work with all content.
Use a computer capable of running flash.
Seek a source of the conent that is designed for non flash use.

Flash Audio Player inserted via Dreamweaver

I am looking for a flash solution to insert easily into a dreamweaver html page. I need a small audio player with a start and stop button. It should have a white background (no text). To work like the example in www.spolin.com/about.html
I would like to have a flash plug in that allows me to insert into another webpage and use an FLV file or other audio format.
Dreamweaver's player does not look good inserted into any webpage.

This information and tutorial assumes I have knowledge of programming and flash pro. I have no knowledge of programming.
Is there a tool or an existing simple player I can modify easily without knowing much about Flash Pro or programming?
I bought Flash Pro because a tech support person from Dreamweaver told me I needed it in order to convert my flv to something that would work in Dreamweaver. I am only an intermediate user of Dreamweaver and Flash Pro is overwhelming in its capacity. I have no idea how to use it.
The player included in Dreamweaver is terrible. It assumes the sound file must be played as a video and inserts a black default video screen with the player controls.
There is no way to simply insert a play, stop button player using Dreamweaver's insert flv player.

Flash 8 Player security settings Help

Hi All. Im having some annoying problems with Flash player 8
(the standalone player not web one).
I am making a flash portfolio, and am using an XML file to
import data (such as images and text) into the portfolio at
runtime.
Everything works when run in the flash IDE when i run the swf
(see IDE.gif), but when i run it in local flash standalone player
(see Player.gif), the images are blocked out (un-masked) - this
doesnt happen when i view the swf on the web or when i make a
projector, which makes me think its something to do with flash 8
player security settings.
ive already changed the settings, adding the local path of
the file and the image directories, but still it wont work.
what other settings do i need to change??
IDE.gif :
www.mitchellpage.com.au/temp/IDE.gif
Player.gif:
www.mitchellpage.com.au/temp/Player.gif

AndiMorris wrote:
> I'm having some trouble with the global security
settings in Flash Player 8. I
> have deployed the player successfully using GPO, but now
have a piece of
> software (Nelson Thornes) that requires content from
c:\program files\nelson
> thornes to be allowed in order to run. Manually enabling
this using the
> settings manager works a treat, however it only changes
it for the current user
> and I can't find any way of setting it per station so
that I can package it up
> and deploy it. I can't expect all of my users to do this
themselves.
There is an MMS.cfg file that you can deploy that will allow
you to
control this site wide without individual user interaction
(overriding
settings manager).
Start learning here:
" IT Administration: Configuring Flash Player auto-update
notification"
http://www.adobe.com/go/16701594
Bentley Wolfe
Senior Support Engineer, Flash/Flash Player
Adobe

HT2515 audio chat with ichat -- help needed!

I have just purchased a new macbook air and i am new to MAC. I am unable to do audio chat through ichat (google talk) with others who are using gtalk on windows enabled PC/ laptops..can some one pleas help me through? Thanks...

Hi,
iChat uses the same protocols to do Video or Audio chats no matter if you use an "AIM" Buddy List or "Jabber" one.
However in the Case of a Jabber one, the Buddy also has to be using iChat.
This is because Jabber Apps (including the standalone App called Googletalk for PCs) use different Protocols to do Video and Audio Chats.
You could both use a Browser and Use Mebeam
(Type in a room "name" once you are in the room copy the URL of the page and send it to your Buddy to invite them)
This uses Flash which you have to have On in your Browser.
If you have a Google Mail ID and have Enabled Talk on your Account you could download the Google Web Browser Plug-in and Chat on the Google pages.
9:06 PM Monday; July 9, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Flash Audio Player

hi all,
The below tutorial worked first time for me and i was hoping someone could suggest a way on using it for multiple pieces of audio i.e. creating a music player. I'm not quite sure on how this would be done, any help would be greatly appreciated.
http://www.flashkit.com/tutorials/Audio/Pause_-marius_h-749/index.php
Cheers,
David

Thanks Adninjastrator,
Good Tutorial

Audio Won't Work: Help Needed!(SB Liv

Tonight I came to my computer and found that the audio wouldn't work. I ran Creative diagnostics, and the first message was that I needed to "reinstall drivers." The second test failed at hardware check, saying no hardware was detected. So I went to Device Manager and it indicated that it was all there. So then I went to Creative's website to check for drivers, after Windows came up with nothing. I found out that there's nothing. So then I decided to do a "Repair" with my Creative Soundblaster Li've! CD. That didn't work either. Then I just did a "Remove", and oddly enough, when I rebooted, it was all still there. In All Programs, in the task bar, it was still there. But only this time I couldn't run diagnostics again because it said that there is missing information or something. So the removal didn't work properly, and ended up removing certain vital components. This left me one step back!
What should I do? Go into Add/Remove Programs and get rid of all Soundblaster components, or get my Resource CD and reinstall sound drivers from it's Should I retry with the Soundblaster CD?
Note: I also opened up my PC after it was suggested by Creative Diagnostics earlier that I check my sound card's physical connection to my machine. I couldn't find anywhere to unscrew the card, so I just put a light amount of pressure on it to make sure that it's fastened in there properly. It seemed absolutely fine. Although I wonder why I couldn't figure out how to remove it.
Also note that I tried system restore, and to no avail.
I honestly don't know what to do at this point. Can anyone help me?!
Thank you!Message Edited by VenaSera on 02-08-200802:26 AM

Hi,
Try uninstalling the sound card following the steps in the article below:
class=MsoNormal style="MARGIN: 0in 0in 0pt">http://us.creative.com/support/kb/ar...asp?l=3&sid=72
class=MsoNormal style="MARGIN: 0in 0in 0pt">
class=MsoNormal style="MARGIN: 0in 0in 0pt">You mentioned: "I also opened up my PC after it was suggested by Creative Diagnostics earlier that I check my sound card's physical connection to my machine. I couldn't find anywhere to unscrew the card, so I just put a light amount of pressure on it to make sure that it's fastened in there properly."
class=MsoNormal style="MARGIN: 0in 0in 0pt">
class=MsoNormal style="MARGIN: 0in 0in 0pt">Did this sound card came pre-installed in your computer?
class=MsoNormal style="MARGIN: 0in 0in 0pt">If this is the case, you might want to contact the respecti've computer vendor for assistance on this issue.
class=MsoNormal style="MARGIN: 0in 0in 0pt">

Flash audio player not playing in safari (it shows but does not play).

Basically i own an internet radio station and for some reason the web player (flash player) no longer plays in Safari since i upgraded to OS X Lion, was working before but not now, it does show the player it just does not play any audio, however it does work in Google Chrome.. any ideas why its no longer working since installing Lion??

The error is "Internet Explorer has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available". Then when I click on the Windows solutions icon, it says:
Adobe Flash Player has stopped working properly.
To troubleshoot this problem, follow these steps:
Click to go online and run the Flash Player uninstaller
In the File Download dialog box, click Run, and then follow the instructions to uninstall flash player. If you are prompted for an administrator password or confirmation, type the password or provide confirmation.
Click to go online and install the Flash Player update
I've done both these things for 2-3 days now. Nothing works.

CS4- Adding a modified audio track to video - help needed ASAP

Hi!
I have an exhibition coming up in a couple of days and I interviewed some people for that, but they all wanted their voices changed.
Now, I imported the avi. file and put it on the timeline. (30 fps [640x480 (1,0)], 11024 Hz - 8-bit Twos-com)
I extracted an audio file in wav, then changed the pitch in audacity and then imported the new audio clip to CS4. But I cannot group or export them in any way. What is going on? What am I doing wrong? I need the video work with modified voices but I can't get it to work. I am losing my mind and running out of time. I would really appreciate any help!
PS: I am a total Premiere noob. So please be patient with me.

But I cannot group or export them in any way.
Not sure that I am following you here. Do you mean that Audacity is not allowing you to Save_As?
Now, if you wish to have all of your Audio Tracks into one WAV file, just do an Export, choosing Export Audio only, by unchecking Export Video. Check that Multiplexing is set to None, where it should default with Audio-only.
Open that file in Audacity, edit as needed, then Save_As, and Import that edited Audio file. Drag it to the Timeline in a clear, Targeted Audio Track of the proper channel-count, and then you can Mute the existing Audio Track(s) in the Audio Mixer, or just turn each Track OFF in the Track Header.
If you mean something else, help me understand what you need to do.
Good luck,
Hunt

My Multiple Saves On A Flash File Gone? [URGENT HELP NEEDED]

Hey guys,
I am very disappointed with the fact that I've been working on a school project on a Flash file for numerous days, and yesterday, I was close to completetion when I found out that none my saves were updated. Basically, I spent hours working on the project and I saved my Flash file multiple times; however, I just opened my Flash file today and found out that all of the updates that I had made on the file were gone. Is there any way I can still recover the file/updates through cache possible, and what may have gone wrong?
What I have Tried To Solve The Issue:
- I have done a full scan of the computer but only found the non-updated file.
- I had dragged the saved file onto my USB the previous day before I turned off the computer, but the Flash file on the USB is the non-updated file as well.
- Try to find a cache, unsuccessfully.
- Browsed this forum but found nothing.
- I even checked my Recycling Bin.
Other Info:
- I am using Flash CS3.
- The folder which contained my Flash file has all of the images that I had edited with PhotoShop CS3, as well as the images that I had downloaded online. It's only the Flash file that is old.
Please help me out on this as soon as possible as it's a school project. My hours worth of time is gone and I really don't want to have to start again while there may be a solution to this out there. Thank you very much.

You best bet is to get your san folks to give you some disk space for a mount point on the last node in the cluster. Once they assign the lun (not raw) have your SAs make it a mounted file system such as /dbbackup.
Run all of your rman backups on your last node on the cluster. The only draw back is, if that node dies, then you will not be able to run backups. but your backups would be safe as they are on the san.
Only way to have a mounted file system on all nodes in your cluser is to have some sort of third party file system cluster ware .. such as veritas or OCFS2 - then all nodes could see it.
I feel the first node in the cluster (the primary node) is the most busy out of the rest .. so thats why the suggestion of running rman on the last node in the cluster.

Flash fading movies and sound-HELP NEEDED

hey guys i need some help
firstly if u want to help me could u please visit this site
http://www.thetimemovie.com/
this site is what i want to do
notice the fading pictures that can be controlled and the
sound bar at the bottom on the left
Any help would b aprreciated GREATLY
thanks in advance
BUTCH101
PS: email [email protected] if u have any info
thanks

What I see in the sample site is that the "sound bars" aren't
sync'd at all. They are just a looping clip that stops in diagonal
shape when clicked. And, the sound is not actually being stopped
when you click the bars. Rather, the actionscript is actually
turning the volume down, gradually. The sound is still continually
playing, you just can't hear it. This is evident in the fact that
when you restart the sound, it picks up not where you left off, but
at the point where it would have been anyway, had you not clicked
the button.
I believe that the sound is set to streaming and as such can
be dealt with frame by frame. So, your real quest is to have
someone (more knowledgable than me) provide sample code that would
begin reducing the volume of the sound object in increments as the
movie moves through frames. Something like:
onFrame (95){
mySound.setVolume(80);
onFrame (110){
mySound.setVolume(60);
onFrame (120){
mySound.setVolume(40);
onFrame (130){
mySound.setVolume(20);
onFrame (140){
mySound.setVolume(10);
onFrame (150){
mySound.setVolume(0);
Obviously, you wouldn't use frame numbers, but a variable
representing the current frame relative to the frame the movie was
in when you clicked the button.

Flash and publishing for iOS (Help Needed)

I currently own Adobe Create Suite 3 Design Premium. I just recently heard that CS 5.5 can develop iOS Apps. So I downloaded trial 2 days ago and thought I would see if I could develop some apps and if things go well upgrade.
Here is the issue I'm running into. I created the CSR file with openssl since I don't own a mac, only a windows 7 based pc. Apples developers program accepted my CSR and created the provisioning file for it.
However, when I go to publish the for iOS it asks for a .p12 file. I found online that is my CSR file. However, it asks for a password. I have no password for it. It does not allow leaving the password field blank, and anything I put in it is incorrect.
All I need help with is the .p12 file and getting past the password and I will be good to go.
Anyone know a step by step guide or could walk me though this part. Thank you and I greatly appreciate it.
~Chris

the only thing is that i havent got a password set to my computer but i will have a look in to that thanks for the help

Flash web player on nseries help plz read

Does any one know that how i can run flash fly web movies on my n70 just like micromedia player on pc is there any software plz reply soon

There might be a problem linking to the player download when the player isn't installed. Have your friend go directly to the download page and try:
http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveAuthorware

Need Help with Audio player

Hi i have this flash audio player which is great. The only
thing is i want the music to play as soon as it loads. At the
moment you have to push play to start.
Thanks for any help.
Carly

That isn't a function of QuickTime Pro; it's only available in QuickTime X.
(90840)

Flash Audio Player in Blog Help Needed

Similar Messages

Maybe you are looking for