Flash Auto-Adds Anchor Points

Hey, Forum;
I'm trying to set up a basic shape tween of a sheet of paper
moving through the air. I start with a rectangular shape that has a
single curve point on each corner (curved so I can show the arcing
& bending of the sheet). After setting a new keyframe and
moving the sheet to the next position, I find that Flash has added
several acnchor points between the corners of the sheet, requiring
me to go in and delete them. What I'm asking is how to disable this
'Auto Add Anchor Points' feature.
Thanks for any and all help.
Cayce

wozza,
Are you sure you are selecting the path, not the guid?
It may be time to look at the list.
The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to 3 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

Similar Messages

Add Anchor Point tool makes entire selection disappear

I've encountered this off and on over the last few years from Flash CS3 to CS5. It doesn't happen on everything but right now I've got some hair I'm creating and I've spent the last 30 minutes trying to add anchor points and only successfully been able to add 3 or 4. Most of the time, adding an anchor point just makes my entire drawing disappear. Has anyone else encountered this? My work has all but come to a stop because of this problem.

Problem Solved.
Turned on Smart Guides (cmd-U) and that seems to have taken care of it.

MAGNETIC PEN TOOL, AUTO DELETE ANCHOR POINT.

MAGNETIC PEN TOOL, AUTO DELETE ANCHOR POINT.
How would you like the feature to work?
like pen tool in AI, when clicking out around shape and creating anchor points, ability to hover over previous anchors and click on them to delete them,
also right click to automatically delete most recent path created , and ability for consecutive right clicks to keep deleting previous segments of anchor and path.
Why is this feature important to you?
easier editability on the fly with the magnetic pen tool..

Many people seem to confuse joining with averaging. Like Ray says, only endpoints can be joined. In your case you don't need to join the points. Select the points you want to have in the same position and Cmd-alt-J, Both, and all the points will hop to the average position.
Alternatively you can snap an endpoint to an anchor point. Put your cursor on the selected endpoint that you want to move and drag it till it snaps onto the anchor point you're aiming at.

Illustrator cc 2014 adds anchor points to guides

What is happening with illustrator CC 2014!!! I have placed a guide to know where to add a anchor point cliked on the add anchor point tool but when i select the object i want to add the anchor point to it adds an anchor point to the guide!!!! so i locked the guide thinking that this would solve the problem it then gives me a warning sign saying please use on a segment of the path it still thinks the guide is a path!!!

wozza,
Are you sure you are selecting the path, not the guid?
It may be time to look at the list.
The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to 3 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

How do I switch to "Add Anchor Point Tool" and "Convert Point Tool" with shortcuts? (CS6)(Windows 7)

I would like to know if there’re shortcuts to switch to" Add Anchor Point Tool" and "Convert Point Tool" on Photoshop CS6 while using a Windows 7 PC.
Thank you for your time!!

What I usually do is use the pen tool. Clicking anywhere on the path adds points, clicking on a point removes it and holding down the alt key while over a point is the convert point tool. Ctrl key is the direct selection tool and ctrl+alt key while dragging the object duplicates it.

Add Anchor Points by Distance?

I often need to add anchor points to a shape when I bring it into Cinema 4D to extrude and warp.
The Object>Path>Add Anchor Points just adds an additional anchor between existing anchor points, effectively doubling the density every time its run.
This isn't great for shapes with very long segments and very short segments. The short segments don't need subdividing, but the long segments need more subdivisions.
Is there a script or plug-in that can add anchor points based on distance? Such as: Add an extra anchor point to a path every 10 mm?

Navarro,
You may do it in this roundabout way:
1) Select the object and Select>Object>Direction Handles;
2) Ctrl/Cmd+X to Cut;
3) Press Delete;
4) Ctrl/Cmd+F to Paste in Front;
Now you have changed the path segments into separate paths;
5) For each (path segment) path apply Object>Path>Add Anchor Points as needed or maybe (depending on version) use the more versatile free Divide script, see below;
6) Select the paths and Ctrl/Cmd+J to join them (use Direct Selection in older versions).
With the rectangle shown, it would be changed into two long horizontal paths and two short vertical ones; you can select each pair and add Anchor Points, or maybe just leave the vertical ones as they are.
You may download the Divide script here:
http://park12.wakwak.com/~shp/lc/et/en_aics_script.html

I am getting this message: "Please use the add anchor point tool on a segment of a path" -- need help!

Hello guys,
I am new to illustrator and am trying to trace one of my scanned sketches on Illustrator CC. I have been watching tutorials on Youtube.com and have followed every step, but when it comes to using the pen tool, I receive a pop up message reading, "Please use the add anchor point tool on a segment of a path." I researched Adobe forums and came across another discussion with someone who had the same problem. After making the changes that people suggested to the other person's discussion, the problem still occurred with me. I am still getting the same message even after making sure I have deselected Snap to grid, etc. Can anyone please help me out!?

It sounds to me like you're using the Add Anchor Point tool instead of the Pen tool. If you are trying to trace a scanned sketch, you'll be creating content from scratch in which case you want to use the Pen tool. The Add Anchor Point tool can only modify an existing path, it can't create one. Switch to your Pen tool and see if that helps.

Deleting anchor point, deletes entire path

Need a solution...when I create a path with the pen tool I am unable to delete anchor points without deleting the entire path. Using the Pen tool + option reveals the white arrow (Direct Selection Tool) - I click and drag a box around the desired anchor point - the selected point is then black - all other points along the path are not filled with black - hence they are not selected - I hit the delete button - instead of the single selected point being deleted, the path is deleted. In the past I would have to quit and reboot PS to clear the problem - that fix is no longer working.
Any suggestions. Thanks.
CS4
Mac 10.6.4
4GB RAM

Had another look at this and I will try to be as brief as possible.
I forgot to point out in my first comment that I had auto add/delete points selected and with that selected the pen tool autmatically shows the delete point tool when the tool is over a point. Clicking would then remove the point and the path direction will be modified. It is not possible to remove a point from a bezier path without modifying the paths direction, or to remove an end point from a path, this is the mathmatical law involved. If you need a gap in the path, place a new point either side of the required gap the delete the path between them. T modify the end of a path, ie. shorten it, you will still need to place a point where you desire the path to end. If as you suggest the whole path is deleted I can only imagine you may be accidentaly double deleting, as the whole of the path becomes selected when you have deleted a point and a second click will delete the rest of the path.
I have tried to reproduce your problem and so this is what i can come up with. I have been using Adobe Illustrator an Photoshop since 1990 and I have not come across this before.
Hope you find a solution as i do appreciate the frustration it can cause.
Mac Pro 2 x 2.8 GHz Quad Core, OSX 10.5.8, 6 GB Nvidia 8800GT, PS CS5.
Regards

Anchor points on line segments.....

Closed path made with pen tool in Flash MX comprises of line segments & curved segments both.While adding anchor points on segments it is noticed
that pen tool adds anchor points on curvaceous segments but not on line segments. Why is it so ? Is their any way to accomlish this task ?

If you hover over the pen tool in its toolbar you should get a selection of different pen tools, at least one of which will allow you to add an anchor point on a straight line.

How to distribute equal spacing with anchor points?

I am working in Lesson 5 of Adobe Illustrator CS5 Classroom in a Book, and am having a problem selecting the 2 anchor points to distribute equal space based on the bottom center anchor point of the violin. The note said to reference chapter 2, which I have already been through, but even after reading the Illustrator Help dialog on pg 75, I am still at a loss. Can anyone explain how to distribute this equal spacing of 2 anchors relative to one anchor point?

csnpreggers,
If anyone has any further advice or comment, I'd still love to hear from all parties.
Especially when working with a finished symmetrical shape, such as a violin, which may have been created using mirroring, in other words elaborating on a shape, possibly with something unforeseen in the first round, and especially when it is inconvenient to cut paths to work with one half, you may use the instructions in small print using invisible ink at the bottom of item 3 in lesson 5:
2 tips, using the Line Tool and Smart Guides:
To make sure the left Anchor Point has the same same distance from the bottom Anchor Point, first ShiftDrag horizontally with the Line Segment Tool from the right Anchor Point to cross the path, then select the violin path and click it with the Add Anchor Point Tool where Smart Guides say intersect.
Or to place both Anchor Points at the same time instead, first create a sufficiently long horizontal path with the Line Segment Tool below the violin path, then ShiftDrag it upwards to cross the violin path at the desired distances, then select the violin path and click it with the Add Anchor Point Tool where Smart Guides say intersect, both right and left.

Add Corner Point to Path

Is there a way to add a Corner Anchor Point to an exisiting path. The Add Anchor Point tool always creates a smooth point, which I then have to go back and convert to a corner point. Seems to me, in earlier versions, I was able to use the Pen tool, then hold ALT and click twice to achieve this. CS6 doesn't respond to that procedure.
Is there some other trick?
Thanks,
Bob

Alt-click once with Pen Tool after using Pen Tool to add a new anchor works for me - I was doing it earlier today with CS6. Are you sure the path has been selected, for example by Cmd-clicking it first with the Pen Tool before you try to add the anchor?

Adding extra anchor points to existing work

Hi guys
Just a little annoying thing...
If I have existing work and instead of rebuilding it add an extra point to change the shape of a flat side to curved - I usually have handles if I have created the whole artwork in one go - but not when I add extra anchor points....?
Is there a way to fix this?
bookie56

bookie,
You may use the Reshape Tool (bundled with the Scale Tool), or use the Add Anchor Point Tool followed by ClickDragging with the Convert Anchor Point Tool.
I usually have handles if I have created the whole artwork in one go
That only applies to curved paths/path segments, I believe.

Why does the pen tool remove previous line when I add new anchor points??

Why does the pen tool remove previous lines??
Video here: http://youtu.be/8AmPUkD88h0
It removes the hairline on the face, when I add more anchor points. Why? And how do I correct it?

The ins and outs of the new and changed behaviors in the re-engineered pen tool have been disussed here on this forum and I'm sure a little detour to the help files will also shed some light on this...
Mylenium

Cs6 , how can i add a anchor point in the curve in the channel Red or Green?

Hi
how can i add an anchor point in the curve in the Channel R / G and B?
in cs5 , with ctrl + click i was able to click on the image and add an anchor point in the curve channel RGB
and with shift +ctrl + click i was able to click on the image and add an anchor poing in the channel Red , 1 in the channel Green and 1 in the channel blue
i know cs6 doesn't have any more ctrl+mouse click , there is the targeted adjustamanent tool
i can do it with ctrl+m and call the curve
but i can't do it with curve adjustament tool
is there a way to add a anchor point in each channel red , green and blue (like the prev photoshop)?
thanks

thanks that's correct! thanks
but it's not 100% correct
to add a multiple points in rgb shift+click doesn't work!
from adobe
Keyboard shortcuts: Curves
You can use these keyboard shortcuts for Curves:
To set a point on the curve for the selected color in each color component channel (but not in the composite channel), Shift+Ctrl-click (Windows) or Shift+Command-click (Mac OS) in the image.
To select multiple points, Shift-click points on the curve. Selected points are filled with black.
To deselect all points on the curve, click in the grid, or press Ctrl‑D (Windows) or Command-D (Mac OS).
To select the next higher point on the curve, press the plus key; to select the next lowest, press the minus key.
To move selected points on the curve, press the arrow keys.
(Curves dialog box) To set a point on the curve for the current channel, Ctrl-click (Windows) or Command-click (Mac OS) in the image.
If you’re instead using the Curves adjustment, simply click in the image with the On-image adjustment tool .

Can't add, delete, convert anchor points

Finally upgraded to CS3, and I find that I can't can't add, delete, convert anchor points on a path in certain documents. I get the "Please use the XX tool on a segment of a path. The appearance tells me I have a path. I can paste the paths into a new file, and everything works. I saved to CS2 and can manipulate to my hearts content. These are not a complicated paths (4-12 points).
On a related note, when I tried to draw the path, the anchor point would not appear where I clicked but up and to the right or down and the left. Moving points with the mouse or the arrow tool constrains the angle and length. Moving in the transform palette, i can move it freely
Obviously, I can copy and paste these into new docs, but is there I did in setting the original documents that caused this behavior, because I'd like to avoid it in the future.
Sorry if this is an obvious question, I'm more of 'Shop person. Thanks in advance.

Yeah, removing grid saved me too. The irony here is we use grids to try and be more accurate, yet the paths can't even be found with snap on. Really dumb 'gotchya' for anyone moving over to this software IMHO

Flash Auto-Adds Anchor Points

Similar Messages

Maybe you are looking for