Flash Bios is Write Protected? (K8N Neo2 Platinum)

Ok I just attempted to flash I have tried both winflash and boot disk.
Win flash tells me something about locks, however boot disk tells me that "Flash Bios is Write Protected". I have looked through the bios I can't for the life of me figure out 1) what version I am running or 2) where the write protect is at.
I have seen so many people that have had no problems with this I figure that it has to be something stupid I am doing wrong'
I did run this flash according to all the switches in the official "how to properly flash your bios correctly" thread.
Help
k8n neo2 platinum
amd 64 3800
1gig non-dual channel ram

http://www.msicomputer.com/support/sup_tshoot.asp#2_2
Let's start with identifying what bios version you have.

Similar Messages

Is it possible to order bios chip 1b for K8N Neo2 Platinum

Hi there im wondering if its possible to order from msi or elsewere bios 1b for K8N Neo2 Platinum seeing as i have the bios tools here, if so whats the install procedure and setup please or any other releviant information?, i have 1.5 everything works fine but theres no way i want to flash
Thanks Blackrat7768

Quote from: BlackRat7768 on 09-February-06, 21:34:23
My issues are:
Improve compatilbility problem with some USB 2.0 devices
BIOS reported incorrect CPU temperature.
If you have the d-bracket installed, it may help to completely disconnect it. Sometimes it will cause inaccurate temp readings. You can always plug it back in if you need it for troubleshooting.
I unhooked mine & my reported CPU temps dropped by 8C...

Bios 1.A for K8n Neo2 Platinum

Someone has already been so brave to try this new BIOS ? Does it fix previous troubles with raid?

Quote from: Ollino on 22-August-05, 20:37:13
Someone has already been so brave to try this new BIOS ? Does it fix previous troubles with raid?
Ive already upgraded to the 1A bios and so far ive had no troubles. I still hate the look of the bios though, with all the options, i liked the look of the bios from v1.8, then 1.9 ruined it and i see that 1A is still the same.
I used the following parameters when i was flasing it as well, /py /sn /cd /cc /cp /wb /f /c.. I got it from another thread where someone suggested to use that everytime, but i have NOOO idea what /f and /c do does anyone know??

Possible to flash bios on k8n neo2 platinum without single core athlon64?

Hi.
I just bought a k8n neo2 platinum v1 and also managed to find a decently priced athlon64 X2 3800+ (which should work fine with this mobo according to msi's website and a number of forum posts I've seen across the web). The cpu hasn't arrived yet, but I'd appreciate if someone could answer something I'm wondering about before that happens. I've read that the mobo (like many others) will need a bios update to use dual core cpu's. A problem I have is that I don't have a single core athlon64 to use for flashing it. I did read on several forums and in some articles that a lot of mobos would be able to boot the dual core as a single core without the bios update, in which case I should be able to flash the bios with a boot disk, or similar. However, it occurred to me that it may only be nforce4 mobos that could do this.
Now, I'd really appreciate if anyone knew whether I could flash the bios with the dual core working as a single core, or if I have to start looking for a single core athlon64, to use for that purpose alone.
Thanks in advance!

Quote from: Bofast on 06-December-06, 04:56:32
Finally got it assembled (after having to order a new fan, since I couldn't get the old one to work)!
It worked to boot without flashing first, the BIOS recognized the cpu as an unknown hammer cpu. After flashing (which went without any sign of trouble), I'm now up and running
Thanks for the help :D
Tried to used the CPUZ to check on the cpu version? Cos dual core doesn have a hammer but manchester only. Gd luck.

K8N Neo2 Platinum 54G BIOS problem

I recently bought a MSI K8N Neo2 Platinum-54G mainboard with W7025NMS v1.3 092204 revision of BIOS.
AMD Athlon64 3000+ 939 is installed on the mainboard, with 2x512 GEIL PC3200 memory modules in dual channel configuration working on default frequency of 200MHz. CPU is recognized correctly as AMD Athlon64 3000+ on startup.
Mainboard’s BIOS seems to be corrupted. In Cell Menu options, in the upper left part of the screen (printed blue) are processor and DDR working timings:
Current CPU Clock 1810MHZ, Current DDR Clock 200MHz.
Aggressive Timings and Dynamic Overclocking values are [Disabled] (processor working on its defaulf settings); Spread Spectrum is [Disabled] while all DRAM Configuration settings are set to [Auto].
While entering HT frequency settings, (locked to [x5]) there are no other values to select – empty, and there is no way to leave it (ESC doesn’t help, the only thing possible to do is to reset the computer by pressing the Reset button on the chassis), but the HT frequency settings were enabled when I loaded Fail-Safe settings, offering [1x], [1.5x], [2x], [2.5x], [3x], [4x], [5x].
Adjust CPU Ratio settings offer only [StartUp], [x4]~[x9] values, but as I understood by reading the manual there should be [StartUp], [x4]~[x20].
CPU Voltage, Memory Voltage and AGP Voltage are set to default.
CPU-Z, as well as SiSoft Sandra 2004 and SiSoft Sandra 2005 and MSI CORE CELL show that processor works at a core speed ~1005MHz, showing multiplier locked on x5.0 and HTT locked at ~200MHz, while the voltage is ~1.05V!
I downloaded the latest BIOS revision (v1.4), did the BIOS flash, but the problem remains!
Anybody, help!

Quote
HT frequency
is a known fault in bios & is easily sorted Bas HT Bios Error
Quote
CPU Ratio settings
AMD64 CPOU's have a lock on CPU ratios which varies according to the specification of the chip. therefore the multiplier available in your bios stops at the max multiplier allowed by amd for your cpu.
As an example i'm running a 3200 754 which has a maximum muliplier of 11 so that is the max i see in bios.
this guide may help Bios Guide

MSI K8N Neo2 Platinum 1.9 Bios & Dual Core Procs?

Just curious and I hope some can answer this question for me. I just sold my trusty K8N Neo2 Platinum to a lucky m8 on eBay. It is sporting the bios revision 1.9 I know that he is going to be running a dual core proc, but I am unsure if he has a single core proc handy to get it up and running so he can flash to one of the latest bioses that supports dual core procs. If he doesn't have a single core proc to get started, will the board at least crank up with a dual core proc so he can get the bios flashed to BIOS Rev. 1.B? Geesh I do hope so because I am leaving town for 10 days on Thursday and will have no time to gut my new setup to reinstall the board and flash it for him. Here is hoping for some good news.

Quote from: Quazi on 19-July-06, 18:07:35
Thank you Stick, very much for the answer and the time. I appreciate it! If they had a virual beer can smilely, I would buy you a virtual beer, or beverage of your choice.
<- you mean like that one?

BIOS for K8N Neo2 Platinum

Hi to all.
Just wanted to know what's the best and most stable bios for my K8N Neo2 Platinum. I'm currently running ver. 1.B, but I've read that ver. 1.9 is the best. Just wanted to know everyone's thought on this one.
In case ver. 1.8 is better,
¿can I flash my bios to ver. 1.9 from 1.B without having any problems?
¿Is ver. 1.9 better for overclocking?
Thanks.

Quote from: Stu on 20-May-06, 07:55:41
if you wanna OC, then Syar's BIOS is the best bet; its the one i use
I agreed with you Stu as I'm also using Syar's Bios 1C.

K8N Neo2 Platinum 1.B Latest Bios Release

I've installed the lastest Bios revision from MSI site for the model K8N Neo2 Platinum. Everything works fine, except that when I want to get into de BIOS menu after presing F2 at the POST screen, nothing happens. The cursor is blinking at the top left of the screen and that's all. It never get into the Bios menu. Do you know what can I do to solve this problem?. Thanks!.

Quote from: sinister1st on 30-September-05, 23:01:28
Guys try ENABLEING usb/kb support in bios this fixed it for me no more flashing cursor .
but how to flash it since u need to clear csmo after flashing?

MSI K8N Neo2 Platinum cant upgrade to BIOS 1.4, Windows wont boot.

Hello
I have a MSI K8N Neo2 Platinum and I cant upgrade to BIOS 1.4. I have tried everything and cannot get Windows XP to boot with BIOS 1.4.
I have reset the BIOS, set defaults, cleared the battery etc but when I load BIOS 1.4 (from a 98SE an ME boot dish and even from the Live Update?
The only solution is to rebuild Windows after loading BIOS 1.4???
Help

Hi !
Well, I have that problem, too. I think the reason is a new RAID-BIOS-Version built in the BIOS-Update. I´ve tried the beta-versions V1.51 and V1.5X, too - but they won´t run anyway.
My WinXp hangs while booting (before the WINDOWS-XP-Logo appears, or while fading in...). I cannot reinstall Windows completely because, when I install the 2 raid-drivers, the installation routine hangs before the licensetext - when I don´t install the drivers i cannont install on the raid-drive (beacuase the installation routine shows 2 hdds).
I think, a new driver will solve this problem, but I don´t know where to find it....
A.

When will the MSI K8N Neo2 Platinum BIOS 1.C be released?

Hello
When will the MSI K8N Neo2 Platinum BIOS 1.C be released?
Thanks
FearTec

Don´t know the reason for you guys, for updating bios, but basically I would recommend Syars modded EasyBios, based on the 1C3 (1C0) version.
Check out the link in Syars sig or read it here;
https://forum-en.msi.com/index.php?topic=59711.0
and read about the differant version and you´ll get a pretty good idea whats changed and added.

K8N Neo2 Platinum 939 -new bios

Hey,
I wonder if there is any newer bios then the one on the homepage (msi) some beti bios or so for the K8N Neo2 Platinum 939 mobo ? If so please post link as well, thanx!

There is a beta bios floating around here 1.25 i think, i tried it but Cpuz didnt work properly afterwards

Cool and Quiet problem on K8N Neo2 Platinum v1.3 bios

Hello
I have a problem with the Cool and Quiet feature on the K8N Neo2 Platinum (v1.3 bios).
As soon and I boot the Core Center v1.7.0.0 will instantly overclock my A64 3500+ CPU to 3000+ Mhz. Of course this reboots my PC.
I have Cool and Quiet enabled in the bios, Automatic overclocking disabled in the bios and the Core Center softwares overclocking is (well it was) disabled? How can I install it or get it to stop overclocking the system.
I want to run the Core Center to enable the Cool and Quiet fan controlling stuff.
Thanks

Strange that Corecenter would overclock your cpu to 3ghz. It's known to be unreliable software, but not that unreliable.
Are you running a stock 3500+, or are you overclocking the HTT/FSB beyond 200?
Previous posted was right about cool and quiet software. You don't need corecenter to run it. Just stay away from corecenter and even uninstall it
Cool and quiet software (a device driver that you download from AMD, or that comes pre-installed with XP SP2) simply works as follows. It introduces the notion of several p-states (processor states) that it switches between based on its reading of cpu load. A p-state is a pairing of cpu voltage and cpu multiplier. On my 3200+ newcastle, the p-states are:
1.5V, 11x
1.4V, 10x
1.3V, 9x
1.1V, 5x
Your 3500+ might be similar. Anyway, just run cpu-z instead of corecenter to watch your cpu speed changing on the fly.
As far as fan speeds go: the cool and quiet driver doesn't affect fan speeds. That means to get the "quiet" part of "cool and quiet" you need either
(a) a fan that has a temperature sensor and which automatically changes its speed based on that, or
(b) just use the motherboard BIOS setting to do the same via bios software.
(c) use speedfan to do the same via windows software.
I myself prefer (b) but it depends on the bios accurately reporting temperature, which can vary wildly between bios releases (e.g. newcastles didn't start getting accurate temp reports until bios 1.4).

Has the K8N Neo2 Platinum bios poroblem been fixed?

I work at CanadaComputers, and well we've been having this problem w/ people purchasing the K8N Neo2 Platinum, and a 3000+ winchester, mainly because that it wont post becuase the CPU is 90NM, where as the bios that is shipped w/ the board only supports 130NM.
I was just wondering if that was fixed or something because people that still buy the board from us, have this problem. Are we getting just the older versions of the board (the june build i think?) or has the problem just not been looked into?
Luis

Interesting that you work there. I bought an MSI K8N Neo2 Platinum and AMD64 3000+ . How are people finding the Asus A8V DX and Epox 9nda3+? Any problems? I may sell my MSI and grab one of those, and actually could easily get it from CC. I don't care if I lose on total speed etc. I want stability and less problems. I haven't even put my PC together and gotten it up and running and the list of potential problems is daunting. That and the fact that I happen to have a Matrox G400 video card which won't even allow me to start my PC! Arrghh. Either that or grab a Sapphire 9600XT even though I hardly play games.

K8N NEO2 Platinum rebooting

Hi all,just got myself a 64bit MSI K8N NEO2 Platinum board & a 3200+,am happy with it but a couple of days ago i got a blue screen with a long message that i didnt have time to read before the pc rebooted,after the reboot i checked the event viewer log file in administrative tools/control panel but couldnt narrow it down as my particular error code wasnt among the possible causes.
Among some of the possible causes were incorrectly installed USB drivers or the BIOS,i downloaded the latest BIOS update before this problem started(V1.40) which i am using now,i used the MSI live update software to flash it which i did in windows mode.Sorry for prattling on!well it did it again tonight and i managed to read a bit of the writing on the blue screen which mentioned flashing the bios to the latest version.I was wondering if anyone else is having the same problem and if so could you please advise me? Thanks for your patience and any help Heres my sys specs:
Model: AMD Athlon(tm) 64 Processor 3200+
Speed: 2.01GHz
Model Number: 3200 (estimated)
Performance Rating: PR3015 (estimated)
Type: Standard
L2 On-board Cache: 512kB ECC Synchronous Write-Back (16-way, 64
byte line size)
Bus(es): ISA AGP PCI USB FireWire/1394
MP Support: 1 CPU(s)
MP APIC: No
System BIOS: Phoenix Technologies, LTD 6.00 PG
Mainboard: MS-7025
Total Memory: 1023MB DDR-SDRAM
Model: Micro-Star International Co Ltd (MSI) ???
(00E1)
Front Side Bus Speed: 1x 201MHz (201MHz data rate)
Model: Advanced Micro Devices (AMD) Athlon 64 /
Opteron HyperTransport Technology
Configuration
Front Side Bus Speed: 1x 201MHz (201MHz data rate)
Total Memory: 2048MB DDR-SDRAM
Memory Bus Speed: 2x 201MHz (402MHz data rate)
Monitor/Panel: CTX EX950F series
Adapter: RADEON X800 Series
Adapter: RADEON X800 Series Secondary
Removable Drive: Floppy disk drive
Hard Disk: Maxtor 6Y080L0
CD-ROM/DVD: HL-DT-ST DVDRAM GSA-4081B (CD 32X Rd, 24X Wr)
(DVD 4X Rd, 3X Wr)
CD-ROM/DVD: MSI CD-RW CR52 (CD 40X Rd, 52X Wr)
CD-ROM/DVD: AXV CD/DVD-ROM SCSI CdRom Device (CD 32X Rd)
(DVD 4X Rd)
1.44MB 3.5" (A:): N/A
Hard drive (C:): 76.3GB (51.9GB, 68% Free) (NTFS)
CD-ROM/DVD (D:): N/A
CD-ROM/DVD (E:): N/A
CD-ROM/DVD (F:): N/A
Serial/Parallel Port(s): 1 COM / 1 LPT
USB Controller/Hub: Standard OpenHCD USB Host Controller
USB Controller/Hub: Standard OpenHCD USB Host Controller
USB Controller/Hub: Standard Enhanced PCI to USB Host Controller
USB Controller/Hub: USB Root Hub
USB Controller/Hub: USB Root Hub
USB Controller/Hub: USB Root Hub
FireWire/1394 Controller/Hub: VIA OHCI Compliant IEEE 1394 Host Controller
Keyboard: Standard 101/102-Key or Microsoft Natural PS/
2 Keyboard
Mouse: PS/2 Compatible Mouse
Device: Creative SB Live! series
Device: Creative Game Port
Model: EPSON Stylus CX3200
Windows System: Microsoft Windows XP/2002 Home (Win32 x86)
5.01.2600 (Service Pack 2)
Network Drivers Enabled: Yes
Warning 100: Large memory sizes should be made of
Registered/Buffered memory.
Tip 101: Large memory sizes should be made of ECC/
Parity memory.
>
>
Device Type: VGA Video Adapter
Device ID: bus 1, device 0, function 0
Windows Device Name: RADEON X800 Series
OEM Device Name: ATI Technologies ??? (4A49)
OEM Hardware ID: FUN_0, VEN_1002, DEV_4A49, REV_00
Device Name: PC Partner Ltd ??? (4A49)
Product ID: VEN_174B, DEV_0D42
Revision: A / 1 (0)
Version: 3.00
Command Queue Length: 256
Fast-Writes Support: Yes
Over 4GB Addressing Support: No
Isochronous Mode Support: No
Addressing Support: 32-bit
Data Transfer Modes Support: 4x 8x

My K8N Neo Platinum [754] did not include a NB fan. But this usually means the overall size of the heatsink is larger. If you remove the fan from yours, the size of the heatsink will not be big enough to cool your NB. As for temps, I've never seen my NB get hotter than 45'C. Note that the core on my NB should be slightly different than yours.
You could try to use the BIOS fan control for the NB. If set correctly, it should reduce some noise.

K8N Neo2 Platinum Checksum Error

Hi, I apologize if I break any rules here, but I tried to use the search option to locate an answer but couldn't find anything that helped me fully.
My problem is that when I try to turn on my computer, I get a message saying:
"Award Bootblock BIOS v1.0
Copyright 2000 Award Software Inc.
BIOS ROM checksum error
Keyboard error or no keyboard present.
Detecting floppy drive A media
INSERT SYSTEM DISK AND PRESS ENTER".
Except this, my computer is completely "dead", I cannot go anywhere. From what I have understood, my BIOS is corrupted, and I need to flash it. This should be done by inserting a boot floppy with added AWDFLASH.exe and a bios.bin. The thing is, I don't know how to find these files, or at least the correct ones. I have also tried to google for a solution, but haven't found anything satisfactionary. So this is kind of my last resort. I am very sorry if this is a newbie question, but I have almost no experience in this advanced (from my perspective) knowledge.
If someone could help me locate the correct verisons of the Award Flash utility and BIOS file, and write a short step by step-walkthrough of how to proceed, you would have my eternal gratitude.
My system is a 4 years old:
MSI K8N Neo2 Platinum 54G S939 with nForce 3 Ultra
Windows XP Home
AMD Athlon 64 3500+ 2.2 Ghz
Gainward GeForce 7800 GS 512 Mb
2x TwinMos 512 Mb RAM PC3200
Maxtor Diamondmax 200 Gb SATA
MS-7025 Ver: 1 is printed on the motherboard.

Quote from: go_for on 11-March-09, 03:04:25
This one is stuck in Award bootblock mode, will most likely need a re-flash from a bootable floppy disk.
Make a bootable floppy disk, in e.g WinXP.
Make a file with notepad, containing this line:
AWFL833D.EXE W7025NMS.1D0 /CC /CD /CP /QI /R /PY /SN
Save this file on this floppy by the name Autoexec.bat
Also add the two files AWFL833D.EXE and W7025NMS.1D0 on this floppy.
Power up the K8N Neo2 Plat. with this disk in the floppy drive. The flashing will begin, let it finish.
Remove floppy and reboot. If it succeeded, set all relevant values in BIOS and save&exit.
Quote
This one is stuck in Award bootblock mode, will most likely need a re-flash from a bootable floppy disk.
Not always, the same fake error message can came from bad memory stick too.
Also he didn't flash his BIOS before the message to appear.

Flash Bios is Write Protected? (K8N Neo2 Platinum)

Similar Messages

Maybe you are looking for