Flash BIOS,my XP wont boot

I'v flashed my BIOS from 1.3 to 1.9mod.
after the flashing(gone OK),my XP dont want to boot.
after that I'v flashed to 1.9(oficial MSI),and agai XP wont boot.
I'v tried to reset BIOS take mam stick out, agai XP wont boot.
HELP me!!!!!!!!!!!!!!!111  

Quote from: Kiril on 22-September-05, 14:26:08
I'v flashed my BIOS from 1.3 to 1.9mod.
after the flashing(gone OK),my XP dont want to boot.
after that I'v flashed to 1.9(oficial MSI),and agai XP wont boot.
I'v tried to reset BIOS take mam stick out, agai XP wont boot.
HELP me!!!!!!!!!!!!!!!111  
Clarify something for us here. Does your computer boot and you can enter bios and windows screen is loading ? Or is the screen black and nothing really happens, except the power comes on ?

Similar Messages

  • Toshiba Satellite L355D-S7901 Bios update Pc wont boot

    I recently downloaded a bios file for my laptop form the support site to reinstall my bios, i made a boot disk from the image and restarted my PC, the bios screen opened and appeared to be working, but my PC shut down during the process and now when I hit the power button the sceen doesn't turn on but the CPU fan and indicator lite will turn on, also i attempted to put the bios image disk in after this to see if it might run even tho the bios appear to be damaged since it acts like it reads from the rom, but no luck. Any suggestions would be great I love my satellite and would hate for the bios to be such an issue.

    Try taking the battery out and disconnecting the power from it.
    Then hit the pwer button to make sure the capacitors are discharged.
    Then reconnect the power and battery and see if it will post.  I have seen that work on a few occasions.
    Welcome to the Toshiba user forums.
    For those of you who do not know what a user forum is, it is a community of users who volunteer time to help other users. Anyone can participate. It's 100% voluntary.
    Being super active is never a requirement

  • K8N Neo4 Bios Flash to 1.8 Wont Boot Past Windows XP Loading

    I just flashed my bios to version 1.8....i cant it to post past the windows xp boot screen.....anyone know why and what i can do??!!?!
    Everything was fine before running 1.5....

    Quote from: sixth on 03-September-05, 08:26:28
    I just flashed my bios to version 1.8....i cant it to post past the windows xp boot screen.....anyone know why and what i can do??!!?!
    Everything was fine before running 1.5....
    I read a thread somewhere in this forum saying 1.8 is good if you have Sempron (E6?). If by some reason you have to flash 1.8, search for User syar2003's post. I followed his procedures and I flashed 1.6 successfully. Bios 1.5 gave me a lot of troubles.

  • P6n platinum bios 1.5 wont boot usb anymore ?

    since i upgraded to the 1.5 bios it will no longer boot from usb flash .is this a known bug ? it never happened on any of the previous bios.
    also is the e8400 going to work on this motherboard ?
    thanks in advance for the replies

    Quote from: Jack the Newbie on 11-February-08, 05:21:09
    (although, there is a good chance with v1.6 for P6N SLI Platinum, the last two BETA BIOS Releases mention fixes and patches for Wolfale CPUs.)
    finally

  • Flashed Bios, Windows crashing on boot up, K9NBPM2-FID

    My PC:
    AMD Athlon 64 x2 5200+
    MSI K9NBPM2-FID Motherboard
    2 sticks of G Skill F2-6400CL5D-2GBNQ R  1gb each=2gb total
    ATI XFX pvt84judf3 8600gt 256mb r
    2 Hard drives both HD 320G ST 7k 16M SATA2 ST3320620AS  Mirrored
    Windows 7 32 bit
    Corsair PSU, 750 Watts
    2 Philips lightscribe dvd reader/burners SATA
    Bios info: A7376AMS V1.BO 062110
    Fastrack PDC 42819 Bios Version 2.8.1030.0032
    I went to the MSI website and ran their Live Update 5 program which showed that I could update my Bios among other things. I selected the new bios for download, followed the instructions for the Windows flash (vs Dos flash). Seemed to go ok but now Windows 7 won't boot.
    It does go through the boot process then comes to a screen that ask to start Windows normally or go into System Recovery Options. If I try to start normally, I get the windows logo where it says Windows and the four colored dots start moving, then it reboots.
    If I go into System Recovery Options, and I go through startup repair i get the following in the Diagnosis and repair details: Root cause found: A hard disk could not be found. If a hard disk is installed, it is not responding.

    Quote
    Not sure how the OS was loaded, that was many years ago.
    Well, please check before touching the BIOS again, as I noticed:
    Quote
    2 Hard drives both HD 320G ST 7k 16M SATA2 ST3320620AS  Mirrored
    If you flashed the BIOS and cleared the CMOS, you'll need to re-enable the RAID controller.
    Go to BIOS Setup > Integrated Peripherals > On-chip ATA Devices, and set 'Onchip RAID controller' to [Enabled].

  • MOVED: Flashed Bios, Windows crashing on boot up, K9NBPM2-FID

    This topic has been moved to AMD64 nVidia boards.
    https://forum-en.msi.com/index.php?topic=154936.0

    Quote
    Not sure how the OS was loaded, that was many years ago.
    Well, please check before touching the BIOS again, as I noticed:
    Quote
    2 Hard drives both HD 320G ST 7k 16M SATA2 ST3320620AS  Mirrored
    If you flashed the BIOS and cleared the CMOS, you'll need to re-enable the RAID controller.
    Go to BIOS Setup > Integrated Peripherals > On-chip ATA Devices, and set 'Onchip RAID controller' to [Enabled].

  • MOVED: HELP PC wont boot up after bios flash

    This topic has been moved to Older MSI motherboards.
    https://forum-en.msi.com/index.php?topic=184216.0

    bump removed, >>Please read and comply with the Forum Rules.<<
    Quote
    I downloaded a newer version of the bios made a bootable usb and flashed the bios all went ok than i restarted the pc and now it wont boot and I clear my Cmos it didnt helped me .. Changed Ram slots alternatively .. didnt help 
    have you removed power cord from the PSU before do >>Clear CMOS Guide<< ?
    Quote
    MEM:  2gb RAM DD2
    what memory stick exactly? brand, model
    is it 1 memory stick or 2?

  • Downloaded and installed Flash Bios and for some reason an error occured, not computer wont boot!

    http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/modelContent.jsp?ct=DL&os=&category=&moid=136412...
    THeres what i downloaded, shortly after i tried to restart my comp but it was all frozen. I used the button to turn it off and when i turn it back on its all black. Nothing happens, it just sits there. What the ****? This is the biggest bull that has ever happened.
    How can u download an update and now ur computer is useless? Any ideas? Thx.

    I have a P105-S6024
    I downloaded the Flash Bios
    03-04-2009 BIOS
    ACPI FLASH BIOS 4.70 for Satellite blah blah blah.
    While it was working the install got frozen and my comp froze. So i turned it off with the button and it never came back on. Well the screen is black, the fan works, the icon that looks like a cake blinks and then turns off.
    I dont understand. Toshiba said i might have to replace motherboard? WTF! Are you serious my computer was fine before this. I was just playing Killing Floor everything was going great and i decided to update some stuff. I really wish i didnt do this man, this is bull. I dont have the money to fix this right now if it is a motherboard problem.

  • K7N2 - Bios Checksum Error - But wont load program to flash bios

    Hi there, my computer restarted itself due a problem with windows (kernel dll or something arather), since then it wont boot at all, beeps twice and says Bios Checksum error.
    Now i understand this means the Bios is corrupted and i need to re-flash it. I looked at instructions on how to do this and followed them to the button. However, it wouldnt load a boot disk at all so i reset the Cmos using the jumpers.
    After reseting it would now read the disk (i can hear it make noises) but it would only get as far as starting to load the award flash program, i.e. it just says "Starting..." but then the disk will stop reading at it will just hang then doing nothing.
    I've tried numerous disks and numerous bios version numbers (but obviously the right ones for my motherboard: K7N2 Delta series Ms-6570), and i've tried using different types of bootdisk all with the same result.
    Is there anything else i can do? or is it pretty much screwed and i have to take it back to the shop i bought it from and request a new bios chip (technically its still under warranty, as its only 10 months old but would this be covered with the warranty?). I can foresee taking it back being a huge hassle so if there is anything i can do to avoid this, it would be greatly appreciated.

    I never cleared the cmos with the power on. Sorry i didnt make it clear, but yeah i always made sure the power was completely out. I left the battery out last night too, but still no change. All cables are on right, and I'll try taking out all the cdrom and cd when i get home. I cant get into Bios (pushing del key). all i get is two beeps and boot block telling me that there is a Bios Rom Checksum error (again, sorry i wasnt being very clear).
    I think it might be pretty much stuffed. I'm tempted just to go to the store and buy another one as they aren't too expensive and probably not too much of a price difference from getting a new bios chip and having to wait for 2 weeks while it gets delivered. But then again maybe i should just be patient and save myself some money.
    Hmm, could it be due to bad RAM? I'll try swapping it with my brother's and see what happens. It's kind of ridiculous that they give the same generic error message for a multitude of different problems, someone should fix that.

  • K9N Diamond - Wont boot after BIOS update

    Just attempted to update the BIOS on my PC and it now wont boot.  Used LiveUpdate with the Windows flash option (don't have FD drive).  The lights on the D-Bracket 2  get as far as LED 2 Green, 1,3,4 Red.  I have already tried to Clear CMOS with no joy.
    Any suggestions on how to proceed much appreciated  - and yes, I already know, I've probably done something stupid
    Thanks
    Grant.

    Quote from: BOSSKILLER on 25-March-07, 19:22:15
    power down PC, remove power cord from the PSU, push several times power button to drain capacitors, then Clear CMOS and leave only one memory stick into DIMM slot close to CPU socket. pull back power cord and try to boot.
    in a future do not update the BIOS for no reason....(only becouse its new, only becouse new BIOS maybe got a new logo and e.g...)
    Looks like I'm back in business now.  I found similar instructions at this location  http://www.bosamar.com/K9N/trouble.html and followed the First Procedure.
    Booted ok with one mem stick, in bios fail safe mode.  I counted 7 short beeps while booting then one long beep.  Not sure if this is ok.  Read about bios beeps here https://forum-en.msi.com/index.php?topic=82221.0 and the final long beep seems to indicate a pass???.  Anyway, Vista appeared to come up ok and I checked everything in the hardware device manager and all looked fine.
    Proceed to reboot with all mem sticks back in place, again same beeps but Vista coming up ok.
    Next I switched bios to optimized defaults, but now 6 short beeps - no long beep.  Windows looks ok.  6 beeps appear to indicate a keyboard problem, but kbd seems to work fine???
    System looks ok now, but not sure if i should look into those beeps a bit more?  BIOS now at 1.3, should I leave as is or revert to an earlier revision?
    One thing I know that I am going to do is to install the FD drive from my old PC 
    Thanks for all the help.
    BTW, the reason I did the BIOS flash was as a last resort to get my sound to work.  Tried the various creative driver as suggest elsewhere on this forum but without success (as of yet there is no official vista compatible audio driver for my mb from MSI).  The JAUD1 connector looks to be connected as specified in manual (but no audio from either the front nor real panel audio connectors).

  • M30x bios does not detect hard drive, wont boot from HD

    Can someone help me in this issue.
    My Sat m30x wont boot from Hard Drive, instead tries to boot from network.
    Tried to load setup defaults and Hd wont show on the settings
    tried to reistal origin CD software by toshiba and the message no target drive displays
    Can this be a hardware problem, some damaged fisical conection, or is it a bios problem
    thanks in advance for some ligth on this problem

    My M30x has the same problem. I just have used it for 2 months.
    I sent it to the repair center as I was told to do, because it has warranty.
    I'm still waiting for a response from them. I don't know what caused it.

  • My macbook air wont boot up. Just beeps every 5 seconds and a white light flashes on front of keyboard

    My macbook air wont boot up. Just beeps every 5 seconds and a white light flashes on front of keyboard

    That normally indicates an issue with system memory. The startup sequence can't complete the boot due to a memory issue. Take it in for service.

  • Wont boot: I get beeps and flashing sleep light

    The PB-T boots to a beeping noise and then the sleep light flashes once: long, then 3 short flashes.
    I reseated the RAM and swapped RAM, to no avail.
    Wont boot from anything even install disks. Did the PRAM too (which never does anything). Tried the reset switch on the back too. Nothing.
    Ideas? I remember the beeps are usually related to RAM. no?
    Steve

    Hi Steve,
    It sounds like you have no good RAM banks, which basically means a new/replacement LB. May not be cost-effective for an older TiBook to replace the LB.
    Beep Definitions

  • After v1.90 BIOS update Satellite Pro A300-1EA wont boot up

    I have just upgraded my laptop to the new BIOS as stated in the title but after doing it my computer now wont boot up at all. I just get a blue screen with it asking me to do a CHKDSK because there might be a virus or that the hard drive isn't connected properly (when it is), and it just keeps rebooting.
    It wont start in safe mode either. Anyone else had the same problem and if so, how do I get my laptop back?? :(
    Thanks for any replies.

    Please don't be mad on me but I think you really didn't read users manuals you got with your notebook. There is exactly described how you can have factory settings again.
    So, now you are 100% sure that recovery image is not on the HDD but you don't know how to have factory settings again. Strange.
    Remove battery, connect AC adapter only and disconnect all attached external devices.
    Start your notebook and enter BIOS settings. Set it to default settings and try to start OS again.
    What happen exactly?

  • Satellite P100-240 wont boot up after failed BIOS update

    Hi, let me just start by saying im an idiot....
    Dowloaded a few drivers for my toshiba p100 240 and noticed there was a BIOS update, i downloaded it and ran the program only for it to come up with
    an error that it will only allow the Administrator to run program. My laptop became slow and would not allow me to turn it off by any means. In the end i took out the
    battery and restarted only to find a blank screen, no start up or anything on screen.
    I fear i have totally killed my machine and its about 4 months out of warrenty, Im sure there is no cheap miricle cure for this but if anyone can give me my options here I would really appreciate it.
    Thanks for your time,
    Martin.

    Hi mate,
    Thats a bit of a problem... If your machine really wont boot up and no screen comes up, then your BIOS was probably damaged.
    I would really recommend you to contact an [authorized service partner|http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_whitepaper.jsp?service=EU&WHITEPAPER_ID=0 000000871] and tell them your problem. Maybe they can do something for. I mean, your machines hardware is ok, and its just some BIOS related thing.
    Hope your machine will work again..
    Greets

Maybe you are looking for

  • How I can to Install Oracle 10g in Windows 7?

    Hello everyone When I try to install the Oracle Database 10g, installation I have errors and does not let me continue. How can I fix this problem? Thank you for your help.

  • How can we bind Two Static Lists to a single Column.

    Hi All, My requirement is 1) I have two different Static List's. 2) These two static list's are saved to the same column in the database table. 3) In the UI, I will be having different dropdown's. And each dropdown is bound to this column. Say if I h

  • Help Please my Keychain Login keeps popping up and refusing my password.

    I don't normally have a login password on boot up but I have not used the login for so long I've forgotten my password. OK so I used the MacBook 13 Install Disk and reset the password to something more memorable. Then it advised me to synchronize thi

  • How to 'force in' the Depreciation Area for an Asset after it was created

    Hi, When I created an new asset under a new asset class, I forgot to set-up the depreciation area for that class. Now after I have saved/created the asset, I get this error : No depreciation areas have been defined for asset 1012500000-0. How do I 'f

  • Can a Pie Chart have a variable number of slices?

    Is there a way to dynamically limit the NUMBER of slices that a pie chart shows? For instance, sometimes there might be 10 elements, sometimes 6 (last 4 are 'blank') or maybe 5 (last 5 are blank). Yes I know I can keep on reducing/increasing the Exce