Flash Bug?

I've made a screenshot, you can see here:
http://www.gorton.lv/flash_prob.jpg
Take a look at Layer 22. As you can see, there is a gray text
and pink
rectangle, on top of other layers.
Now scroll down the picture - you are looking at a test movie
I published.
As you can see - there is only pink rectangle, but text is
gone. WTF?
I've spent whole night trying to understand what's wrong with
that flash.
Is there an explanation or its a bonus of a new CS3?
Thanks in advance,
B.

NAB (not a bug). Just extend the Dynamic text field so it is
more vertical. Test again.
Chris Georgenes / mudbubble.com / keyframer.com / Adobe
Community Expert
Bare wrote:
> I've made a screenshot, you can see here:
>
http://www.gorton.lv/flash_prob.jpg
>
> Take a look at Layer 22. As you can see, there is a gray
text and pink
> rectangle, on top of other layers.
>
> Now scroll down the picture - you are looking at a test
movie I published.
> As you can see - there is only pink rectangle, but text
is gone. WTF?
>
> I've spent whole night trying to understand what's wrong
with that flash.
> Is there an explanation or its a bonus of a new CS3?
>
> Thanks in advance,
> B.
>
>

Similar Messages

Is it flash bug? Tween Class

I've been working on a bit big project. I've some components on the stage. There are basically 4 frames. Each frame has some components. What I've done is, I've used tween class. Workflow is something like this:
Frame 1:
--used Tween class to get fade effect for List component.
--used Tween.MOTION_FINISH event to fire an event when it is finished.
--when it is finished, applied eventListener
--on Change event, remove eventListeners and use Tween class again to get reverse fade effect.
--again used Tween.MOTION_FINISH event to fire an event when finished.
--in that evenHandler, gotoAndStop(2);
Frame 2:
//similar
Frame 3:
//similar
and so on.. now, what happens, is, if i play with my scene, sometimes tween class failed to work. sometimes it does not display List component, sometimes it displays List component with alpha 0.2. sometimes it happens with movieClip also. Is it flash bug or problem with my code?

probably a coding problem. the most common error that seems like a flash bug would be to define a tween within a function body allowing flash to gc that tween, possibly before it starts and/or completes.

Serious Flash bug?

Hello. I am a newbie to this forum, so I am sorry if this
message is off-topic. If it is, I would be obliged if anyone could
direct me to the correct place.
I am a veteran programmer but I am new to actionscript. I
have come across some strange behavour which is driving me mad.
Following is a part of my code :
...[snip]...
private var pnt:Point = new Point();
private var dirp:int;
private var fastp:int;
private var i:int;
private var pathB:Array;
...[snip]...
for (dirp=fastp; dirp<=i; dirp++) {
// BUG!!! If I UNCOMMENT 1 of the 2 following lines, code
gets mixed up.
// pnt.x=pathB[dirp][0].x+pathB[dirp][2].x;
// pnt.y=pathB[dirp][0].y+pathB[dirp][2].y;
pnt=new
Point(pathB[dirp][0].x+pathB[dirp][2].x,pathB[dirp][0].y+pathB[dirp][2].y);
if (addElement(pnt, dirp, pathB[dirp][2], pathB[dirp][3]+1))
return pathF;
As I mention above, if I uncomment //pnt.x=... or //pnt.y=...
or if I even replace them with something like pnt.x=pnt.x+1 ;
then my code gets mixed up and returns wrong results.
This is driving me nuts because these two lines shouldn't
have any effect since right below them there is
pnt=new Point(...);
which supposedly "cancels" the 2 previous instructions.
Right?
Could anyone, please, show me the obvious that I can't see?
Many thanks in advance,
Bill Kotsias

it's not necessarily a flash bug. there are situations where
assigning your pnt's x and y properties may trigger some other code
to execute and re-assigning those properties immediately afterwards
does not stop the other code from executing.
you need to isolate the minimum code needed to display the
issue before anyone will check it. you're nowhere close to that
now:
http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

Is it a flash bug?or???

is it a flash bug?o how i can fix it?
http://www.gotoandlearnforum.com/viewtopic.php?f=28&t=15709

It does - just need to have the url correct:
http://www.gotoandlearnforum.com/viewtopic.php?f=28&t=15709
Dave -
Head Developer
http://www.blurredistinction.com
Adobe Community Expert
http://www.adobe.com/communities/experts/

Looking for list of ie7 and flash bugs

I'd like to stay clear of any ie7 and flash bugs that are out there, does anyone know of a list of any known bugs with flash player and ie7?
I'm currently experiencing an issue where flash 10 and my app do not work in IE7 but they work fine in all other browsers.

Hi, Check in Tools, manage add ons(all categories) for Shockwave Flash Object and make sure it is Enabled and is the same version of Flash Player you have Installed.
Test with each browser here and if Flash Player is Installed correctly you should see the animation and the version of Flash Player will be displayed also. http://www.adobe.com/software/flash/about/
If you need further help, post back your operating system, other browsers used and versions.
Thanks,
eidnolb

Crazy flashing BUG on my screen during compression

Every time I start a compression I get a crazy flashing bug on screen. I have provided a video if anyone have any idea.
https://magekfilmworks.box.net/shared/static/46jazyxdz9.mov

Try running disk utility from safe boot or a system disk.

IE7 WMP11 + Flash bug

I have an embedded Mediaplayer (11) and a playlist file
(ASX):
After the video is done it loads a AD created in Flash but
all of a sudden links inside the Flash is no longer clickable in
IE7.
It has worked fine and it also works in FireFox and Opera no
problem at all but no longer trough IE7.
I know that Brightroll (AD company) delivers lots of ads this
way and they also don't work anymore in IE7.
Can anybody confirm this bug and is there a solution to this

Hi Gaurav! Thanks for your reply.
I do indeed use a lot of Javascript, but it's all
encapsulated ("namespaced") and so it shouldn't be interfering with
anything!
Maybe I tweaked something in the Spry code that I shouldn't
have, but I can't imagine what...
I will try rebuilding the Spry menu, as you suggest.
Cheers

Samsung Video Flashing Bug

I found a bug in the current version of the firmware (version 1024) for the Samsung TV UN55D8000. I just wanted to let people be aware of the issue.
The issue is that the app flashes black when a video attempts to loop.
I have the stageVideo seek to the start to its 0 point when the netstream reports that the video has reached its end.
When the video loops, the entire app flashes to a black screen for a split second.
This is NOT a problem on the Broadcom developer box or on TiVo devices - just the above mentioned Samsung TV. Therefore, I assume this is a Samsung bug.

Thanks for sharing the info.

Image size / flash bug ?

Hi there,
I did a website for a photographer: very simple, three themes
(music, portrait, nude) every theme with one large image that you
can scroll through.
One of the images is nearly 10.000px width. This was no
problem, a few month ago when I created the movie first (in
FlashMX). Now it suddenly is. The movie already works fine in some
browsers/computers, but in some browsers it doesn’t ... (It
seems not to be a browser or Mac/PC-problem, because I’ve
seen both: Macs it works on, PCs it works on, Macs it
doesn’t, etc ..) When I now create a movie with CS3 (same
fla-file) all I see is a red face. I figured out that when
I’m scaling down the image size (to 7.500px width), it works,
then I can create a movie in CS3 that works.
Does anyone hear of that problem. Is it a FlashCS3 bug?
You can see the website here (if you’re lucky you can
see the naked girls!):
http://www.henrik-pfeifer.de/henrik_pfeifer_akt.htm
- viktor

hi Victor, I was able to view your images in an older version
of flash player (9,0,47) Your flash player is most likely the
latest one (9,0,115). The latest flash player version has a problem
displaying images that have been saved in cmyk colors. Try to
reexport the image in RGB and then re-insert it in Flash.

Template & flash bug DW8?

I have just updated a site that had a small flash movie in a
non editable
region in templated pages.
DW offered to update the code and it wrapped the flash movie
in the
'AC_FL_RunContent' script tags.
AC_FL_RunContent(
'codebase','
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.
cab#version=7,0,19,0','name','logo','width','176','height','133','id','logo'
,'onmouseover','MM_controlShockwave(\'logo\',\'\',\'Play\')','src','../flash
/log11','quality','high','pluginspage','
http://www.macromedia.com/go/getflas
hplayer','swliveconnect','true','movie','../flash/log11' );
//end AC code
The flash movie link inside these tags is now *fixed* to the
link which in
the template ( ../flash/log11 )
Any child page spawned from the template retains this link
wherever it is
saved to in the site and only plays the movie if the
../flash/log11 link
happens to be correct.
Detach the template and the link reverts to what it should be
and the movie
plays.
Once I worked out what was happening it was not too difficult
to find a
workaround but appreciate it if anyone could shed some light.
thanks
lawrie

thank you
lawrie
"Murray *ACE*" <[email protected]> wrote
in message
news:eh50e6$83v$[email protected]..
: It is a known bug.
: Murray --- ICQ 71997575
: Adobe Community Expert
: (If you *MUST* email me, don't LAUGH when you do so!)
: ==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
: ==================
: "lawrie" <[email protected]> wrote in message
: news:eh4tig$4t8$[email protected]..
: >I have just updated a site that had a small flash movie
in a non editable
: > region in templated pages.
: >
: > DW offered to update the code and it wrapped the flash
movie in the
: > 'AC_FL_RunContent' script tags.
: >
: > AC_FL_RunContent(
: >
'codebase','
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.
: >
cab#version=7,0,19,0','name','logo','width','176','height','133','id','logo'
: >
,'onmouseover','MM_controlShockwave(\'logo\',\'\',\'Play\')','src','../flash
: >
/log11','quality','high','pluginspage','
http://www.macromedia.com/go/getflas
: >
hplayer','swliveconnect','true','movie','../flash/log11' ); //end
AC
code
: >
: > The flash movie link inside these tags is now *fixed*
to the link which
in
: > the template ( ../flash/log11 )
: >
: > Any child page spawned from the template retains this
link wherever it
is
: > saved to in the site and only plays the movie if the
../flash/log11
link
: > happens to be correct.
: >
: > Detach the template and the link reverts to what it
should be and the
: > movie
: > plays.
: >
: > Once I worked out what was happening it was not too
difficult to find a
: > workaround but appreciate it if anyone could shed some
light.
: >
: > thanks
: >
: > lawrie
: >
: >
: >

Explorer HTML text flash bug?

Hello!
I have the following problem for a dynamically created
textfield:
mytext.text = "bold textgreen";
Even tough it works great in the Flash environment, it will
render differently in an IE7 browser.
In Firefox, it renders the bold and class tags correctly. IE7
doesn't render anything, it show only plain text: "bold
textgreen"...
If I change text to htmlText, IE7 will render the bold tags
but no class [stylesheet] tags correctly... and Firefox will only
show the bold tags, no line breaks and no class [stylesheet] tags
correctly?
AS2 had some bugs regarding html rendering but I don't think
I ever had this problem regarding html text back then...
Any thoughts? Thanks in advance,
T.

I too am experiencing the same bug with my own site. The only
thing that makes me feel better about the situation is this problem
is seen on Adobe's home page as well. If you pull up a browser in
Linux and view the homepage, you will notice that the pull down
menu on this site falls under the flash animation.
My only solution so far is to check the clients OS and if
it's reported as a Linux box then to serve up a static image
instead. This only works if the OS is being reported correctly to
the server... Not a good overall solution though.
Does anyone know if any fix is underway?

Hi, all. Obvious flash bug?

Hi, all. I appreciate all the help being offered here but I've observed what appears a denial that this last update has caused a large amount of headaches all around.
I'm on Win 7 Sp1 x64 and Firefox 3.6.15. Just to test Flash I turned off all addons, themes, and extentions except the Firefox defaults. I shut down FF and used the Flash uninstaller, used Advanced System Cleaner and the os disk cleaner to flush all cashes, clean the registry, and clean the drive in general. I rebooted my machine, stopped all extraneous background programs and services, restarted a clean FF, and went to play a video on MaxPc that hasn't been working, The page indicated I neede Flash so I installed it and turned off hardware acceleration.
Needless to say the video played no longer than 57 secs and stopped. Nothing I did, refresh, etc., would cause it to go further.
Flash has a bug! No amount of denial is going to change this. We all depend on it. It needs to be fixed.
Please, if I've missed any steps in my experiment let me know.

Hi Paw Bear,
I know what the problem is and it's the new version of Flash Player 10.2... Here is a link to the archive of older versions of Flash Player that worked:
http://kb2.adobe.com/cps/142/tn_14266.html I removed the new Flash Player version from my system following the instructions to a T and the videos would start to play for only a second or two, then a black screen or even a white screen (this was on Youtube). It was only after I searched through other threads on this Adobe Flash Forum that I found the link to the older archived versions. Go through the steps of removing the new Flash Player again, then go to the archive link. I selected v 10.1 and it worked like a charm. You will have to unzip the folder and manually install all three (3) files that have the red "Flash" logo on them. After you do this you should be good to go. Good luck! I know this is a very frustrating problem and I want to help as many people as I can on this forum because, let's face it, we completely depend on "video" to enjoy our computers. I hope you will let me know if this helps and if it doesn't, I'll try to find some other info for you or maybe I can clarify my instructions.
Warmly,
fairplay08

Iframe flash bug (redrawing the iframe in upper left corner)??

Hi All.
Has anyone found a fix for this safari bug. When I place an iframe on my web page holding a flash file it looks fine on all other browsers than safari!!
In safari (latest version, not beta and earlier versions) the first time a visitor opens the page the flash movie is drawn in the upper left corner as well as the position it should be in. If the visitor reloads the page it looks ok and the "extra" flash movie is no longer in the upper left corner.
You can see the site here: www.trierski.dk
Any advice would be great..
Dr. Virus

Haven't tested with Safari on PC. The problem I want to solve is with the Mac version of Safari... Version 2.0.4 (419.3) Not the beta versions...
Dr. Virus

Help! Flash bug reports returned as "undeliverable"

I've been attempting to submit a bug report regarding Flash Professional CS6 and CS5 on Adobe's official bug reporting page:
https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
I've made three attempts in the past 4 days, and each one has been returned to me as "undeliverable":
Delivery has failed to these recipients or distribution lists:
[email protected]
The recipient's e-mail address was not found in the recipient's e-mail system...
I've successfully submitted reports regarding Fireworks and Dreamweaver, so the error is not on my end. Does anyone know what's going on here?
As there is no "Flash Professional" option in the list of product names, I've been choosing "Flash Authoring", which I've seen mentioned elsewhere as a suitable choice for general issues with Flash Professional.

Originally, I posted this in the Flash Pro forum... but after a day, I moved it here as I had received no response and it's not a Flash product question, per se. (Also, I'd noticed that the top participants on that forum were all Community Members, whereas this forum includes an Adobe Employee as its top participant and features a number of employee/admin responses.)
I'm not aware of how to reach out to the Flash product managers... Any advice on that subject would be appreciated.
Thanks!

Adobe CS 5 Flash Bug

Hello Guys, I installed CS 5 last Week and now it starts a bit bugging around. If I start a debug session, debug my code and after this, end the debug session, I'm not able to open a new debug session, because CS 5 says: "Debug Server Socket already in use. Debug Session will now be terminated." and I need to restart CS5. How can I avoid this? It's really nasty :(. Greets

Please post in the Flash forum. This forum is for suite specific issues only.
Bob

Flash Bug?

Similar Messages

Maybe you are looking for