[Flash Builder 4.6] encounters "FlashBuilder.exe has stop working"

We encounters "FlashBuilder.exe has stop working" error messages during editing or build code
Please help, thanks.
Windows Edition: Windows Server 2008 Enterprise Service Pack 1
Processor: 4 Processors Memory: 16GB System type: 32-bit OS
Flash Builder Edition: Flash Builder 4.6 (with SDK 3.6.0/4.5.0/4.5.1/4.6.0)
java.version: 1.6.0_16
Flash Builder.ini JVM configuration
vmargs
-Xms512m
-Xmx1024m
-XX:MaxPermSize=256m
-XX:PermSize=64m

1.Uninstall the the build
2.use the Adobe Creative suites Cleaner tool to remove any trace left of Flash builder
http://www.adobe.com/support/contact/cscleanertool.html
3.Try downloading the the installer, and try installing again
Ensure you have complete administrator privileges and right click on the exe and choose "Run as Administrator" while installing.
it this standalone installation or and Eclipse plugin installation
if it still does not work
4. Repeat 1and 2 and check if the build at,
https://www.adobe.com/cfusion/tdrc/index.cfm?product=flash_builder
works for you, if you install it as a trial edition.

Similar Messages

[Flash Builder 4.6 ] FlashBuilder.exe has stop working

We encounters several "FlashBuilder.exe has stop working" error messages during editing or build code.
Please help, thanks.
==============================================================
Flash Builder Edition: Flash Builder 4.6 (with SDK 3.6.0/4.5.0/4.5.1/4.6.0)
java.version: 1.6.0_16
Flash Builder.ini JVM configuration
vmargs
-Xms512m
-Xmx1024m
-XX:MaxPermSize=256m
-XX:PermSize=64m
Windows Edition: Windows Server 2008 Enterprise Service Pack 1
Processor: 4 Processors
Memory: 16GB
System type: 32-bit OS

Thanks- I fixed the problem by updating to the latest apache flex sdk. Had to tweak a couple things but got it working. Just waned to say thank-you for your willingness to help.
-Jonathan

"ProgramName.exe" has stopped working?

Hello,
I am currently in school and am trying to compile programs using Visual C++ Express 2010, because that is what the professor uses. I was told to download the source code from the books website, and build from there. When compiling any of the books
code however I get the error message: "ProgramName.exe" has stopped working? I have re-installed VS, and DirectX (as these are the only libraries used), and checked to ensure I have the Windows 8.1 SDK installed as the instructor said, but I am still
getting the error 99% of the time (Every once in a while it will not pop up). The program runs fine while debugging, but when I try to run the generated executable outside VS it exits immediately.
Can anyone tell me what could cause this?

Hi Jhessin,
Test Tools in Visual Studio 2010 and 2012forum is to discuss Visual Studio testing issues. Your issue is about the specific program. If your project is DirectX application, I suggest consulting
this issue on DirectX forum provided here:
http://xboxforums.create.msdn.com/forums/
Thanks,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Error message: "application.exe has stopped working" under BEX event name on Windows 7 64-bit.

I am trying to run a third party program on my Windows 7 64-bit. It has an executable file.
1. When I double click on this file (appname.exe), I will see a GUI window.
2. In this GUI window, I will have to select a dynamic link library file (appDLL.dll) to load into the appname.exe that will run the application. This DLL file is compiled in Visual C++ 2010 Express based on a C source code under the Release Win32
mode.
3. It is supposed to run after step 2. Instead it give the BEX error message saying "appkernel.exe has stop working." There is no online solution at this time when I select that option to search for an online solution.
I can run this program on my Windows 7 32-bit computer. What does this error message mean? Why is there an issue like this on Windows 7 64-bit? How can I fix this issue? The detailed description of the problem is below.
Problem signature:
Problem Event Name:   BEX
Application Name:    appkernel.exe
Application Version:   0.0.0.0
Application Timestamp:   4f06397d
Fault Module Name:   MSVCR100.dll
Fault Module Version:   10.0.40219.325
Fault Module Timestamp:   4df2be1e
Exception Offset:   0008af3e
Exception Code:   c0000417
Exception Data:   00000000
OS Version:   6.1.7601.2.1.0.256.1
Locale ID:   1033
Additional Information 1:   81c8
Additional Information 2:   81c8f46ed31e8fb8b45fcb166d97e96d
Additional Information 3:   eec1
Additional Information 4:   eec16e1825ff7aa9948f00b1f285bbaa
Thanks in advance!
LDL

Hi Brian,
Thank you for the reply!
The third party software provider wrote the source code in C. When I compiled this source code, the DLL file will be created in store in the Release folder in the same project directory of the source code.
I just double check my computer, I have the following Visual C++ packages installed on it:
1. Microsoft Visual C++ 2005 Redistributable
2. Microsoft Visual C++ 2005 Redistributable (x64)
3. Microsoft Visual C++ 2008 Redistributable - x64 9.0.21022
4. Microsoft Visual C++ 2008 Redistributable - x64 9.0.30729.17
5. Microsoft Visual C++ 2008 Redistributable - x64 9.0.30729.4148
6. Microsoft Visual C++ 2008 Redistributable - x64 9.0.30729.6161
7. Microsoft Visual C++ 2008 Redistributable - x86 9.0.30729.4148
8. Microsoft Visual C++ 2008 Redistributable - x86 9.0.30729.6161
9. Microsoft Visual C++ 2010 x64 Redistributable - 10.0.40219
10. Microsoft Visual C++ 2010 x64 Runtime - 10.0.40219
11. Microsoft Visual C++ 2010 x86 Redistributable - 10.0.40219
12. Microsoft Visual C++ 2010 x86 Runtime - 10.0.40219
13. Microsoft Visual C++ 2010 Express - ENU
14. Microsoft Visual Studio 2010 Service Pack 1
15. Microsoft Visual Studio 2010 Express Prerequisites x64 - ENU
16. Microsoft .NET Framework 4.5.2
17. Microsoft .NET Framework 4 Multi-Targeting Pack
From what I understand the Visual C++ 2008 Runtime is included in the Redistributable package.
Leo

PRINTER 6510 e-all in on. photo product core exe has stopped working?lang=en

i installed the 6510 all in one printer, it works great but the photo creation has a message that is (photo product core exe has stopped working). that should i do to fix it?
This question was solved.
View Solution.

Hi Puhu.
Please contact our customer support team at [email protected] They can help get you printing again.
Thanks for writing,
RocketLife
RocketLife, developer of HP Photo Creations
» Visit the HP Photo Creations Facebook page — news, tips, and inspiration
» See the HP Photo Creations video tours — cool tips in under 2 minutes
» Contact Customer Support — get answers from the experts

Photo Stream PC-error message "applephotostreams.exe has stopped working" and now additional photos that I want to upload is not uploading.

I sync my devices with a PC running windows. I have turned on Photo Stream on my PC, iPhone4S & iPad2.
On my PC it creates two default folders in Pictures called "My Photo Stream" and "Upload".
Instructions says that you can add photos to the "Upload" folder and it will automatically upload to your "My Photo Stream" folder and when your devices are connected to wi-fi they will upload to each device and show up in the "Photo Stream" section of Photos.
I was able to upload 50 photos but then I got an error message that applephotostreams.exe has stopped working.
How do I fix?

I was having the same problem. Earlier in the week, I was able to drag a few photos to the upload folder and they synced correctly. Yesteday, I dragged different photos, and I got the "applephotostream.exe has stopped working" error.
The solution - for me, at least! - was to reduce the size of the pictures being uploaded to the photostream. While all of the pictures were jpegs, the first set were ca. 800K (3800 x 2500), and the second set were ca. 2.5 MB (4000 x 2000). When I reduced the resolution of the last set by a factor of 4 (ca. 600 K, 2000 x 1500), they uploaded without a hitch.
Based on this admittedly sketchy experiment, it looks like Apple has a max picture size limit, apparently based on file size rather than picture resolution). Perhaps < 1 MB? To be rigorous, I should complete the experiment - leave the resolution of the second set of pictures alone and reduce file size by reducing jpeg quality.
Has anyone heard about a picture file size limit?

Getting "setup.exe has stopped working" message when trying to install labview 2011 or 2012 on a windows 7 machine

I am getting a "setup.exe has stopped working" message when trying to install labview 2011 or 2012 on a windows 7 machine. I already tried running setup.exe as an administrator with the same results. I have Microsoft .NET Framework 4.5.1 installed on the affected machine. Could this be the cause of this issue? Or does someone know the root cause of such error?
Solved!
Go to Solution.

Hi - are you getting it at the start of installation, during or after 100% progress has finished?
Is it just LabVIEW you're installing, or is it drivers too, in which case, what was the last large package that was installing at the time?
This could be caused by the NVIDIA chipset driver :
https://decibel.ni.com/content/message/46299?tstart=-130
Thanks
Sacha
// it takes almost no time to rate an answer

ApplePhotoStreams.exe has stopped working on Windows 7 x64

same as the title.
The message "ApplePush.exe has stopped working" appears for a long time, and today, a new message "applephotostreams.exe has stopped working" appeard.
I using Windows 7 Ultimate x64 Chs on HP Z800 workstation.
How can I fix this?

Same issue, Upon start up I get this error (attached)
Have tried choosing check online for solution, it spins and spins, then poof, the dialog box simply closes, nothing, no tab open in the browser with possible solutions, no reply that a solution couldn't be found. If I go into iCloud panel, PhotoStream has a check mark in it and the same error pops up again. HOW do you uninstall applephotostreams.exe? It is NOT listed in my Programs & Features in Control Panel. By doing a 'Search Desktop' I can see it is located in Program files (x86)/Common files/Apple/internet services... how do I properly delete it and reinstall? (It is working FINE between my iPad and iPhone, and until yesterday had been working just fine on my PC (Win 7 64bit) Thank you

Applephotostreams.exe has stopped working on Windows 7 PC

applephotostreams.exe has stopped working. Windows 7 PC.

Same issue, Upon start up I get this error (attached)
Have tried choosing check online for solution, it spins and spins, then poof, the dialog box simply closes, nothing, no tab open in the browser with possible solutions, no reply that a solution couldn't be found. If I go into iCloud panel, PhotoStream has a check mark in it and the same error pops up again. HOW do you uninstall applephotostreams.exe? It is NOT listed in my Programs & Features in Control Panel. By doing a 'Search Desktop' I can see it is located in Program files (x86)/Common files/Apple/internet services... how do I properly delete it and reinstall? (It is working FINE between my iPad and iPhone, and until yesterday had been working just fine on my PC (Win 7 64bit) Thank you

Cannot install BI Publisher 10.1.3 Windows 7 setup.exe has stopped working

Hallo!I am trying to install Oracle BI Publisher 10.1.3.4 on Windows 7 Professional 32 bit.When I click on the setup.exe,the following output appears on the cmd prompt
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be 4.0, 5.0, 5.1, 5.2 or 6.0 . Actual 5.1Passed
Checking monitor: must be configured to display at least 256 colors . Actual 4294967296 Passed
Checking Temp space: must be greater than 500 MB . Actual 252112 MB Passed
Checking swap space: must be greater than 500 MB . Actual 1900MB Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from C:\Users\jirungu\AppData\Lo
cal\Temp\OraInstall2011-04-13_09-33-57AM. Please wait ...
When the OUI tries to launch,the following error appears
setup.exe has stopped working.
Is this due to an incompatibility problem?Are there any prerequisites for installing BI Publisher?How can I resolve this?
Thanks.
Edited by: 4joey1 on Apr 12, 2011 11:35 PM
Edited by: 4joey1 on Apr 12, 2011 11:36 PM

I am also facing the same issue and i tried with the following modes
xp mode
vista mode
2000 mode
still i am seeing the same error.
My Notebook is Window 7 Home Premium 64bit & have jdk 1.6 32bit.
Edited by: user5345841 on May 26, 2011 12:10 PM
Edited by: user5345841 on May 26, 2011 12:55 PM

HT1349 I have icloud on my pc with windows vista. Recently, upon startup I receive an error that says applephotostream.exe has stopped working. Windows will close this problem . . . any suggestions. I tried to download the control panel again. no luck

I have icloud on my pc with windows vista. recently, upon startup I get a message that says applephotostream.exe has stopped working. Windows will close this program . . . I tried re-installing the icloud control panel, etc. to no avail. any leads?

Hi, I have the same problem. Has anyone come forward with any advice on fixing the problem?

How do I get rid of "Apple Photo Streams.exe has stopped working" on Windows 7

The error message "Apple Photo Stream.exe has stopped working" keeps popping up when I start my PC which has a 64 bit Windows 7 OS. How do I get rid of this?

I saw that uninstalling and then reinstalling the iCloud control panel on your computer corrects it. I did this and it worked for a while but I'm getting it again. Any ideas?? Thanks!

PProHeadless.exe has stopped working error when opening projects in Adobe Media Encoder CS6

Hi, I recently upgraded to Adobe Cloud CS6 and am having problems with the Adobe Media Encoder CS 6 (version 6.0.1.31 64-bit).
When I try to add Adobe Premiere projects in AME, it sometimes gives me the following error:
PProHeadless.exe has stopped working
I tried rebooting, and it still gives me the same error. Sometimes the project will load, sometimes it won't.
The Premiere projects contain a H.264 .mov file coming from my Canon T2i. I also added an overlay logo to the bottom right of the video that I created in Adobe After Effects, which only contains text, no effects, no motion, etc. Sometimes I also have a .wav file recorded from a Zoom H4n, but not always. I usually edit those in Adobe Audition with the remove noise feature.
I am running on Windows 7 Ultimate 64-bit. I'm using an i7 with 16GB ram and an ATI 6870 video card.
I have the LUT buddy plugin installed.
It will give me the error the first time I try to load the project, and the connection to Dynamic Link Server will fail. Afterwards, if I try to load the project again, even if I restart AME, it stays stuck in the Connecting to Dynamic Link server...
Any help anyone could provide would be appreciated.

Hi Dima,
Thank you very much for your prompt reply. Dragging the sequence from PPro to AME made AME lock up. But your second suggestion of exporting the video directly from PPro seems to be working. I still have 6 minutes to go, but at least it got up to 25% so far, so everything seems good.
Thank you once again!
(although it would be nice if I could go through AME just in case)

Adobe flash player update service 11.3 r300 has stopped working, what causes it and how do I fix it?

I get this message once and a while: "adobe flash player update service 11.3 r300 has stopped working" I have reenstalled the flash player but it came back. any ideas?

This may help.
https://bugbase.adobe.com/index.cfm?event=bug&id=3225162
Good luck,
Keith

Sqldeveloper64W.exe has stopped working

Problem Summary
Receive error: sqldeveloper64W.exe has stopped working when attempting to open .sql files
Problem Description
Within SQL Developer 4.0, I've gone into Preferences > File Types, found the .sql extension and checked the box that says Open with SQL Developer. I've gone to the Set Associations control panel in Windows 7 Professional 64 bit and confirmed that the Current Default is set to sqldeveloper64W. I've used the CMD function to access regedit, deleted the file associations for .sql and set all preferences again. If SQL developer is not already open on my machine and I attempt to open a .sql file, the application launches fine. If I try to open additional files from windows explorer or windows search, I get an APPCRASH indicating that sqldeveloper64W.exe has stopped working. I click close the program and sql developer remains open, but my file has not opened.
Error Codes
sqldeveloper64W.exe has stopped working

This problem has been plaguing me for ages too, but I think I've finally found the solution from this post:
http://answers.microsoft.com/en-us/windows/forum/windows_7-files/problems-with-file-association-in-windows-7-64-bit/8a84fcec-22df-4942-8e35-d98dbe96e327
"In regedit: Navigate to Computer\HKEY_CLASSES_ROOT\Applications and find your .exe name.
Navigate under its name to shell>open>command. In the Default change its location to the actual location of the executable, hit okay and then try and reassociate the file type as you normally would."
In my particular case, I browsed to Computer\HKEY_CLASSES_ROOT\Applications\sqldeveloper64W.exe\shell\Open\Command
and changed the (Default) value
from "C:\oracle\sqldeveloper\sqldeveloper-4.0.2.15.21-x64\sqldeveloper\bin\sqldeveloper64W.exe" "%1" %*
to "C:\oracle\sqldeveloper\sqldeveloper-4.0.2.15.21-x64\sqldeveloper.exe" "%1" %*
And now the file association works correctly, and now with sql developer already open, I can open another .sql file from windows explorer. Fingers crossed this is finally fixed!
Keith

[Flash Builder 4.6] encounters "FlashBuilder.exe has stop working"

Similar Messages

Maybe you are looking for