Flash builder 4.7 activate problem

I buy the flash builder 4.7 and it keeps showing the internet error as i trying to activate the product, i have no idea where i can get the support.
all the possible have been try, such as
- https://lm.licenses.adobe.com Done ->Congratulations! You have successfully connected to Adobe License Management Server. works
- https://ims-na1.adobelogin.com/renga-idprovider/resources/img/logos.png can see the adobe logo
- host is clear
- GlobalSign Root CA is enabled
all works find just i can not activate the flash builder 4.7 premuim.
anything further i can do ? i can not just leave the product there , i paid for it and it's not cheap...

Similar Messages

Flash Builder 4.5 Debugger Problem

Hey Everyone,
I spent the better half of the last hour searching for a remedy to my situation but have not found one. I have a problem where in Flash Builder 4.5 I keep losing my debugger version of Flash Player. I download the version here http://www.adobe.com/support/flashplayer/downloads.html#fp10 and it works again. However, seemingly random it will do it again a couple of days later. So I'm trying to figure out what is causing this or how I can fix it. It is quite annoying to go to jump into a project, debug it and then have to stop everything and download it again. Anyone know how to fix this?
I am running it on Mac OSX 10.6.7 (latest).
This is the message I receive when it breaks:
"Flash Builder cannot locate the required debugger version of Adobe Flash Player. You might need to install the debugger version of the Flash Player or reinstall Flash Builder. Do you want to try to debug with the current version?"

My two cents on this issue & how I resolved it.
I was getting a similar message which referenced a location in C:\Windows\System32\Macromed\Flash, and was looking for this version of the Flash Player: Flash64_10_3_162.ocx
What I tried that did NOT help:
Re-associating the SWF file type to open with a Flash Player debugger version downloaded from Adobe's site.
These three steps resolved the issue for me:
I had installed the 64-bit version of the Flash Player a few months ago, so I uninstalled that since it cannot be used by Flash Builder as a debugger. Back in FB 4.5.1, I got another message saying Flash was not installed at all.
I used Adobe's Flash uninstaller tool and then,
re-installed the latest debuggers for IE & Firefox.
I can now debug in IE or FF without any issues. FB finds the debug version of the Flash Player.
From what I saw when researching this, there seem to be many causes for this issue so I'll give Adobe some slack here. I will point out that the post from Adobe employee Anirudh Sasikumar, above, was not helpful in my case and was in fact misleading and not specific enough as to the location of the file he referenced. I searched for that file and found dozens of them on my machine, none in any location he mentioned. I wish he would have taken a little more time to give a complete path to this file. Maybe he did, but I could not find that path, or folders, on my machine. I work in a tightly-controlled network environment so perhaps these folders are ones I cannot see due to permissions issues, but it would've saved me time to get a complete path to start with.
For complete and full disclosure, here is my set-up; hopefully this will help others with a similar setup who are experiencing this nagging issue:
Windows 7 Enterprise 64-bit, Service Pack 1
Flash Builder 4.5.1.313231
Eclipse 3.6.1r361_v20100909xxxxxxx
Flash Debugger version (IE & FF): 10.3 r183

Flash Builder 4.7 activate issue

I buy the flash builder 4.7 and it keeps showing the internet error as i trying to activate the product, i have no idea where i can get the support.
all the possible have been try, such as
- https://lm.licenses.adobe.com Done ->Congratulations! You have successfully connected to Adobe License Management Server. works
- https://ims-na1.adobelogin.com/renga-idprovider/resources/img/logos.png can see the adobe logo
- host is clear
- GlobalSign Root CA is enabled
all works find just i can not activate the flash builder 4.7 premuim.
anything further i can do ? i can not just leave the product there , i paid for it and it's not cheap...

Did you contact Adobe support? https://helpx.adobe.com/support.html

Flash Builder 4.5 SDK Problem while reading/saving Data/Text from XML

Hi,
I'm working on a FLASH BUILDER 4.5 Project. Previously I was working on FLEX 3 with SDK 3. Now I have shifted my Project to FLASH BUILDER 4.5 with SDK (Apache Flex 4.11).
In this project, I have few links with me, clicking on which opens a TAB, and the respective Link data (XML DATA) loads into the Respective TAB. I'm using Flash Builder 4.5 currently and Apache Flex 4.11 SDK. When I use Previous Version of SDK (SDK 3), then the Data loads fine... but when I use higher version SDK (4.6 or 4.11), then the data starts to break, for instance:
When I click on link, i.e. CLICK FOR THE VERY FIRST TIME, the Data Shows like:
Link 1 body text comes here
Again, when I click on the same link for SECOND time, the Data Shows like:
Link 1 body text comes here
Again, when I click on the same link for THIRD time, the Data Shows like:
&lt;P ALIGN=&quot;LEFT&quot;&gt;Link 1 body text comes here&lt;/P&gt;
I got stuck inot this issue very badly. Any help would be apreciated.
Thanks in advance.
IMAGE 1 (FIRST CLICK)
IMAGE 2 (SECOND CLICK)
IMAGE 3 (THIRD CLICK)
IMAGE 4 (FOURTH CLICK)
THANKS

Hello everyone -
Since I last posted an interesting update happened. I tested my Flex application again, it is calling a Jetty Server that returns a JSON object, in different BROWSERS. I disabled HTTPS for now, and the crossdomain.xml policy file is wide open for testing (ie. allowing every request to return data). So the app accessing the data using HTTP only. Browsers - IE, Opera, Firefox and Chrome. Each browser contained the SAME application, revision of the Flash Player (10.3.183.10 debugger for firefox, chrome, opera, safari PC; 11.0.1.129 consumer version in IE9,) take a look at the screen shot (safari not shown although the result was the same as IE and chrome)
Note that Opera and Firefox returned successful values (i.e. successful JSON objects) using the same code generated from the Data Services Wizard. Chrome, IE and, Safari failed with an Internal error. So I am left wondering - WHY? Is it something with the Flash Player? the Browsers? the Flex SDK? Any thoughts are appreciated. Again, the code is found in the original thread above.

Flash Builder 4.5.1 - Problem compile Flex Mobile release build

I am building a flex mobile applicaiton using Flash Builder 4.5.1. The application works fine on the device (Nexus S) and desktop in the debug mode however, whenever I export the release build the app is not installed on the device automatically. When I manually install .apk it also fails (get Application not installed message with green check mark). Any thoughts?

Getting a big closer... Compiled .swf using mxmlc, then manually packaged .apk without any issues... When I try to run: adb install -r myapp.apk: I get the following error:
pkg: /data/local/tmp/myapp.apk
Failure [INSTALL_PARSE_FAILED_NO_CERTIFICATES]
Perhaps certificates are not respected?

Problem launching Adobe Flash Builder 4 Tiral

I'm new to Flex and Flash Builder 4. I installed the 60-day trial of Flash Builder 4, encountered no problem with the installation. When I tried to launch it after installed successfully, an error message popped up saying: "Adobe Application Manager is needed to start your trial. Adobe Application Manager is needed to resolve this problem. However, it is missing or damaged. Download a new copy of Adobe Application Manager from http://www.adobe.com, or install this product agian."
I searched in Adobe.com and googled this "Adobe Application Manager" and found nothing about this product or software or something. It seems this "Adobe Application Manager" doesn't exist at all. Any one have any an idea about this?
The version I downloaded and installed is "Adobe Flash Builder 4 | English | Standalone Winows". My OS is MS Windows XP Professional Version 2002 SP3. I don't have any previous flex builder version installed in my pc.

Sorry that your trials aren't launching. This appears to be the same problem being discussed here:
http://forums.adobe.com/thread/628582?tstart=0
It doesn't look as if the install support techs have arrived at a solution yet, but they're diagnosing the problem, and hope to have a fix and/or workaround soon.
-Chris

Adobe Creative Suite Extension builder 2 not supported in Flash Builder 4.7 64 bit

Couldn't find anywhere to submit a bug report so hopefully this is a good place.
I was able to succesfully download and install the Adobe Creative Suite Extension builder 2 into Flash Builder 4.7 with not problems.
When I click File -> New -> Creative Suite Exention Project nothing happends. I recieve no error messages just the Project wizard panel that is expected to open doesn't open.
The extension works as expected when installed into the non-beta Flash Builder 4.6 32 bit verison.
I suspect there may be an incompatibility when switching to the 64 bit version of Flash Builder.

Hi everyone,
The problem is that Flash Builder 4.7 is not compatible with Extension Builder 2. Therefore we have provided Flash Builder 4.6 available for download, see links below.
We apologise for any inconvenience caused. Please don't hesitate to contact me if you run into further problems.
Best regards,
Hallgrimur
Product Manager - Extension Builder
Links:
http://www.adobe.com/support/downloads/detail.jsp?ftpID=5517(Windows)
http://www.adobe.com/support/downloads/detail.jsp?ftpID=5516(Mac)

PHP Connection in Flash Builder 4

Hi
Sorry if this is in the wrong place. I could see nowhere else to ask this question.
I am very, very new to Flash Builder (in fact, I am following a tutorial on building a data-centric application using Flash catalyst CS5 and Flash Builder 4).
The problem I am having is that I cannot seem to validate the data connection in Flash Builder 4.
For my project, I click "Connect to Data/Service" then select PHP. I select Flex Server and change the "Application Server Type" to PHP.
The page I then get asks for a Web Root and Root URL. This is where I'm having problems. No matter what I type in these boxes, when clicking the "Validate Configuration", I get the error of "Cannot access the web server".
I have Apache and PHP installed on this Windows 7 64-bit machine.
The Web root folder for my site is actaully held on my D drive, so web root reads.. "D:\Web Files\Site".
The URL for this local site is http://site.local
I can browse to http://site.local in my browser and all is well. My site shows. I can even see this fine in Flash Builder's Internal web browser.
I have tried moving the web root folder inside the default apache root htdocs folder, but get the same problem. I have even changed the permissions on all folders to allow full control, but this doesn't help.
I really am starting to tear my hair out now. Can someone please help me? Am I doing something obviously wrong?
Many Thanks

Did you install apache / php / (optionally mysql) separately or in a bundle. I would suggest using xampp bundle, because it configures everything correctly along with installing a few helpful tools like phpmyadmin, etc. Great fast setup for testing purposes. Anyway... about the URL: I think the url you should be using is something like http://localhost/yourprojectfolder/...
Presuming you have set up a project... and selected the option PHP at application server type you would then input (in my case, using the default xampp setup):
Web root: C:\xampp\htdocs
Root url: http://localhost
Output folder: C:\xampp\htdocs\<projectname_here>-debug
The url you d input in the browser to navigate to your project would then be: http://localhost/<projectname_here>-debug
(no index.html at the end, provided your server is setup to serve this file automatically if it exists)
Hope this helps!

Problem with working in Flash Builder 4

Hi there,
I am working on the develepment of a new kind of website in 3D.
For this I am using Flash Builder 4 AS3 Project and the 3D program Away3D.
The problem is that I created a SWF in one AS3 project called PoloSWF.
In another project I created a plane with the SWF as material.
For this I copied PoloSWF from the original bin release directory and pasted it in the assets folder of the plane project.
When running the plane project, the SWF is not visible.
Any idea where the bug is?

I tried it in Internet Explorer, Firefox, and Chrome. I was able to get the Akamai download manager but that was all I could download. Currently with firefox the download is stuck at waiting and will not continue any further.

FLASH BUILDER 4.7 PROBLEM PLEASE HELP

Hello,
So i just ordered the adobe creative cloud service today and downloaded the adobe application manager, installed Flash Builder 4.7 and then preceded to create a flash game. It had tons of errors with my code so i then just did the simple HelloWorld program and it ran fine. But as soon as i tried to type in more complex code like (import flash.display.Loader) it has a yellow triangle by this statement of code saying that (import flash.display.Loader is not used locally). I have had this problem with the rest of my code also. Please help!!! I have already tried to contact adobe technical services but they said they couldn't help me because I had the creative cloud. I am in desperate need of help!!!!!!!!!!!
Thanks,
DarkRue97

Flash Builder 4.7 is warning about unused imports largely to help you clean up your code. These warnings may also be useful if you have made a typo in the qualified name. An unused import, however, should not stop you from building your application.
If you're building a Flex application, then you should use a Flex project. Flex projects use the Flex SDK 4.6 already included in Flash Builder 4.7. Unless you're trying to customize or update the SDK for a specific reason, you shouldn't need to add a new Flex SDK if you're just starting out to explore developing a Flex application.
Once you start writing more complicated applications or games that take advantage of the latest AIR features, you can update the Flex SDK with a later version of AIR by applying the updated AIR SDK overlay for Flex zip distribution manually. I would wait until you're more familiar with Flash Builder 4.7 and Flex projects before trying to upgrade an SDK. The following like describes the process:
http://helpx.adobe.com/x-productkb/multi/how-overlay-air-sdk-flex-sdk.html
If you're doing pure-ActionScript development, you can use an ActionScript project. These projects use the new compiler, ASC 2.0. In such a project, you cannot use Flex concepts, like MXML or CSS. Some Flex-specific metadata extensions in AS3 are also not supported. Just pure-AS3.

Problem setting up Flash Builder to build an ANE

I am a native android developer trying to build an Air Native Extension for some flash developers. I don't know much of anything about flash, flex, AS, or other adobe technologies. The setup of Flash Builder is driving me insane. I followed the advice in Developing and using Adobe AIR native extensions for Android devices | Adobe Developer Connection the best I could (matching SDK versions even if they are old) but I am getting the following error when building the ANESampleTest (Flex Mobile AIR) project:
Namespace 3.6 in the application descriptor file should be equal or higher than the minimum version 13.0 required by the Flex SDK
Again, I am NOT an adobe developer. The version 3.6 vs 13.0 is a pretty weird comparison, but I guess 3.6<13.0 and I'm guessing someone in marketing somewhere decided to renumber things. At this point I'm so disoriented by the install, sdk update, and sdk 'overlay' that I have no idea what component is popping this error or where to look for the problem.
What does this error mean and what is the next step toward resolving it? Please treat me like a total noob because I do not know about the difference between flash/flex/air and what their respective versions are.
Thanks!
<moved from downloading,installing, setting up - kglad>

The fix: Change the namespace on the second line of <project root>/src/ANESampleTest-app.xml
FROM: <application xmlns="http://ns.adobe.com/air/application/3.6">
TO: <application xmlns="http://ns.adobe.com/air/application/13.0">
A brief and incomplete background:
The file <project root>/src/ANESampleTest-app.xml is the ‘application descriptor file’. When using the project files downloaded with the tutorial (that contained the 3.6 reference), the builder did not find this compatible with the configuration on my computer (a trial version I installed today - 5/3/2014 - and patched according to the tutorial). I never did figure out how to lookup valid namespaces and am still confused about how all the sdk’s relate to each other. I stumbled upon this solution by creating a fresh new project and found that the namespace specified by the new project wizard was “13.0” on this line of this file.

Problem signing application to BlackBerry from Flash builder 4.6 premium

Hi,
I would like generate "BlackBerry" version of my application with Flash Builder, for this i'm using this guide.
http://docs.blackberry.com/en/developers/deliverables/37176/BlackBerry_Tablet_OS_SDK_for_A dobe_AIR-Getting_Started_Guide_for_Windows_Developers--1943146-1206065540-001-2.0_Beta-US. pdf
First, i have uninstalled older flash builder versions, and i have installed Flash builder 4.6 premium.
After, I have installed the BlackBerry Tablet OS SDK for Adobe AIR.
Next, I have updated the BlackBerry Tablet OS SDK plug-in.
But, my problem is using the deployment setup wizard.
I tried with the BlackBerry Tablet Simulator started, but when I click "Run the BlackBerry Tablet OS Deployment Setup Wizard" to configure your development environment, the wizard is not showing.
I would like generate my application, ".bar" file, signed with the reals certificates of BlackBerry. But i don´t know what is the problem.
Somebody have tested if this wizard is working to Flash builder 4.6.
Furthermore, i have tried to setting the reals certificates of BlackBerry, with the preferences window:
Flash Builder > Preferences > Flash Builder > Target Platforms > BlackBerry Tablet OS > Signing.
Such as at this url:
http://www.adobe.com/devnet/air/articles/packaging-air-apps-blackberry.html
But when i click Register button, the dialog is not showing.
Any idea is wellcome.
Thanks

Hi all,
I have found the problem
BlackBerry Tablet OS search a path that don´t exist in my spanish Windows X.
As my system is at spanish, BlackBerry Tablet OS installer create this path:
%HOMEPATH%\Configuraci¾n local\Datos de programa\Research In Motion
To resolve the problem, you must to create the path in english and copy the content of spanish path:
%HOMEPATH%\Local Settings\Application Data\Research In Motion
By default, code signing keys are stored in a central location in your profile directory and used by all BlackBerry Tablet OS development tools. The default locations of these files vary based on operating system and are outlined in the following table.
Note: In a Windows XP environment, the default %HOMEPATH% is C:\Documents and Settings\<username>. In a Windows Vista and Windows 7 environment, the default %HOMEPATH% is C:\Users\<username>.
Windows XP
%HOMEPATH%\Local Settings\Application Data\Research In Motion
Windows Vista and Windows 7
%HOMEPATH%\AppData\Local\Research In Motion
Mac OS
~/Library/Research In Motion
UNIX and Linux
~/.rim

Installing Flex SDK into Flash Builder 4.7 problems

Hi,
Im completely new to Flash Builder, today I have installed Flash Builder 4.7 & Flash CS6 from Creative Cloud for my son to start to learn game programming (with my help), I have used simple coding in web design however this terminology is new to me.
I bought my son the latest 'Foundation Game Design with ActionScript 3.0' book on recommendation but it was written when FB was version 4.5 so im guessing this might be the problem.
The book is very easy to follow but have hit problems at the beginning of the tutorials, the book talks about Flex SDK but it seems that FB 4.7 uses AIR SDK ?
So the first project called HelloWorld, we got up to:
Got an exclamation mark which said
'The import flash.display.Sprite is not used
locally'
Continuing with the rest of the project the exclamation mark disappeared:
However on selecting run- Debug we got a blank Flash Player window ('generate HTML wrapper file' was deselected)
So either we've done something wrong, or the book and FB version are not compatible?
Any advice would be great!
Thank you
Latest ...
I thought that installing Flex SDK may solve the problem but after following instructions I have the error message, see image below. Really stumped now!

Sorry, if I went a little overboard. After re-reading your post, perhaps I should back up a little.
First, there are little things that Flash Builder (FB) will complain about. Having extra import statements in your code doesn't hurt anything. If I'm trying different solutions and then commenting out the code, the import statements will hang around, FB will complain, but just ignore it. If you see a little icon on the left edge of your code editor and its a red circle with an X in it, then that is something that will have to be fixed.
When you create an app in FB or Flash you can choose to create a web app which means it will run in a browser window. The project can optionally create an HTML wrapper, or web page that will load your app. In Flash Pro you can choose File->Publish Settings and there will be a checkbox on the left to publish a HTML wrapper. In FB, you can right click your project in the Package Explorer, select Properties at the bottom, select the ActionScript Compiler, and down at the bottom there will be a checkbox to create a HTML wrapper.
If you're just learning Flash Builder, then the FlexSDK 4.6 and the AIR SDK 3.1 that comes with it should be fine. You mentioned Apache SDK and I'd recently been working with that so I ended up getting side-tracked.
Getting an AIRSDK to work with when build ActionScript projects is easy. Just go to the adobe site, type AIR SDK in the search box, and you should find a page that will let you downloaded the latest version. There's also a page to let you download the latest AIR runtime, and if you were just going to run AIR apps and not build them, then that's all you would need. As a developer you'll want to install the runtime from the downloaded .exe file. With the SDK, after downloading it, installing it is easy. Just create a new folder an unzip the SDK into it, then place it somewhere easy to find. I put all my SDK's in their own directory right off the c: drive. So I have c:\AIRSDK_3.5.0.880 and c:\AIRSDK_3.7.0.1530. I use very descriptive folder names so I always know which SDK's I have to work from.
To use the SDK in Flash Pro select Help -> Manage AIR SDK, hit the plus button and add the folder you created. Now when you've opened a Flash project, you go to File->Publish Settings and select the combo box at the top, you'll see options like 'AIR 3.7.0.1530 for Android' in the list that reflect the SDK's you've added.
Generally with FB you'll be using a FlexSDK, or perhaps a FlexSDK overlaid with a newer version of AIRSDK. Overlaid basically means you copied the contents of the AIR SDK into the Flex Folder. The article I mentioned above will give you all the details on creating those. For instance, I downloaded the Apache Flex installer, installed it, then created an empty folder called c:\ApacheFlexSDK_4.9.1, launched the Apache installer, gave it the new empty folder I'd created, selected all the download options, and let it all download. If it launches a popup box or a security warning, you can allow it, and it will continue. Once you have the SDK and you want to use it with a project in FB, just right click the project, select Properties, selected that Compiler tab again, and up in the right corner you'll see 'Manage SDK's...'. Hit that link, add your new SDK to the list and give it a descriptive name, then selected the checkbox beside it to set it up as your default. If you do this, then all your projects set to use the default will automatically switch to it and rebuild. So if you want a project to stay with a specific SDK then select that option in your Compiler tab, and then you could use the combo box to select your new added SDK.
When I started with FB I think I spent the first 2 days going round and round with project settings and options until I got them all figured out.
When I develop, I usually have my browser open and I have bookmarks and favorites to let me quickly get to all the pages I use most often. Here are a few of them:
http://help.adobe.com/en_US/FlashPlatform/reference/actionscript/3/index.html <---- The API reference. In the packages window check out 'Top Level' at the top and Language Elements near the bottom. I think I have this page open in one or more tabs almost every day.
http://www.adobe.com/devnet.html
http://www.adobe.com/devnet/actionscript/learning.html
http://help.adobe.com/en_US/as3/learn/index.html
http://helpx.adobe.com/flash.html
http://help.adobe.com/en_US/flashbuilder/using/index.html
Free videos to help you learn Flash Pro:
http://tv.adobe.com/show/learn-flash-professional-cs6-/
http://tv.adobe.com/show/learn-flash-professional-cs5/
And you've already found the forums! But if you don't find an answer here, many times you can find your question already answered on www.stackoverflow.com forums.
Ok, I think I went a little overboard again.

Problems running Flash Builder 4.6 profiler

Hello,
I have a problem running Flash Builder profiler. When I click "Profile" it starts my web application, but nothing else happens inside Flash Builder itself - no new data appears in Profiler perspective, Flash Builder itself doesn't show any sign of doing something.
My mm.cfg contains the next line: "PreloadSwf=C:/flash builder workspace/.metadata/.plugins/com.adobe.flash.profiler/11/ProfilerAgent.swf?host=localhost &port=9999"
Additional details:
OS: Windows 7
Flash Builder version: 4.6
Tested web browsers: Firefox, IE 8 - the same problem in both of them
Flash player versions: ActiveX/Plug-in Version:11.7.700.169
I made sure that ProfilerAgent.swf indeed exists in the location defined in mm.cfg. In addition, I tried to change port 9999 to other ports (both in mm.cfg and in Flash Builder). I also verified that the location of ProfilerAgent.swf appears in trusted locations of Flash Player.
I would be very grateful if someone could help me to solve this problem.
Thanks,
Valeria

R Grieve wrote:
This sounds like something has gone wrong during installation. CSAR and CSLIBS references should be set up automatically during installation.
There should also be no need to import the Flex SDKs as CS Extension Builder 2.0 ships with them included. It won't do any harm though having the CS Flex SDKs imported.
Can you detail how you installed CS Extension Builder 2.0, please and where you obtained it from?
Here are the installation instructions I would recommend starting from a clean FlashBuilder 4.6 instance:
To install Adobe Creative Suite Extension Builder, download the ZIP file and unzip it into a root location (SDKRoot).
Install Extension Builder in Eclipse with Flash Builder or Flash Builder Standalone:
In Eclipse, choose Help > Install New Software.
In the Install dialog, click Add.
In the Add Site dialog, click Local... to browse to the SDK root folder or enter the URL of the update site.
Name the site CS SDK and click OK to confirm the changes.
Select the new CS SDK site in the "Work with" field.
-- Select all the Adobe Creative Suite Extension Builder components.
-- Click Next to confirm the selection.
In the Install Details review dialog, click Next to confirm that you want to install all the components listed.
Accept the terms of license agreements and click Finish.
Re-start Eclipse as recommended.
I obtained it from Adobe and installed it using the Help > Install software option, but without unzipping it. Maybe that was it.
Now I've done a clean installation and it works perfect. I did it with administrator permissions, don't know if it has anything to do with it, but I read it somewhere and did so just in case!
Thanks a lot!

How to solve the flash Builder 4.6 scroll view and textinput display problem?

I have a dynamic form application which worked well on flash builder 4.5, having display problems in flash builder 4.6 now. What I did is adding
TextInput objects to a scroll view and set the texts for them dynamically. Everything is fine after the screen loaded. But if I scroll down, sometimes the texts will be placed in wrong positions. I attached the screen copy of the wrong display. Does anybody know how to solve this problem? Thanks.

Check out the two threads below (if you have not already). I have not tried it but aeonus describes an approach that made me think of something that might work ... It is a workaround but, what if you have a text field (txtA) with the skin that does not allow soft keyboard selection, but does scroll correctly, and on the onClick event of that text field, you dynamically cover it with another text field (txtB) that does allow soft keyboard selection, (but does not scroll properly) and trigger the keyboard. After you get the entry from the user, set the value of txtA and destroy txtB ... leaving you (theoretically) with properly scrolling text fields. If you have a lot of those in your app, you might want to write a component that implements that behavior.
"Create a dynamic textfield, and on click, invoke create a StageText instance at the same location as the textfield (by setting the StageText.viewPort property)
Finally, set StageText.softKeyboardType to "numeric" and call StageText.assignFocus();"
http://forums.adobe.com/thread/915019?tstart=0
http://forums.adobe.com/thread/911214?tstart=0

Flash builder 4.7 activate problem

Similar Messages

Maybe you are looking for