Flash Builder 4.7 executable launcher was unable to locate its companion shared library

After I install the flash builder 4.7 on my Mac Book, I run the flash builder and got this message.
"Alert"
"The adobe flash builder 4.7 executable launcher was unable to locate its companion shared library. "
Can any one hlep

I have the same question.

Similar Messages

The server was unable to load the SSL provider library needed to log in

Hello All,
When I am trying to login to my default SQL 2008R2 SP2 instance in windows 2003 server via ssms, I am getting the below error
A connection was successfully established with the server, but then an error occurred during the pre-login handshake. (provider: Shared Memory Provider, error: 0 - No process is on the other end of the pipe.) (.Net SqlClient Data Provider)
When I looked into the error log and i could see lot of these messages.
The server was unable to load the SSL provider library needed to log in; the connection has been closed. SSL is used to encrypt either the login sequence or all communications, depending on how the administrator has configured the server. See Books
Online for information on this error message: 14 Not enough storage is available to complete this operation.
Force protocol encryption is set to off.
I am not sure what is the underlying problem. server's total RAM is 4 Gb and max_server_memory is set to 2 GB. CPU utilization is very normal at the time of issue.
I restarted the SQL service and i am able to connect to the instance, but the issue is repeating and i need to find a permanent fix.
Thanks

I could also see the below in error log some time before i get the above alert
Error: 701, Severity: 17, State: 123.
There is insufficient system memory in resource pool 'internal' to run this query
then after sometime flurry of alerts
The server was unable to load the SSL provider library
needed to log in; the connection has been closed. SSL is used to encrypt either the login sequence or all communications, depending on how the administrator has configured the server. See Books Online for information on this error message: 14 Not enough storage
is available to complete this operation.
Thanks

PC Sync was unable to locate your Outlook message ...

I recently installed PC suite on my PC. I am trying to sync with Outook MS exchange. So far, I have been unable to do so. I receive a "PC Sync was unable to locate your Outlook message store" error message. By searching this board, it appears that this is a fairly common problem. I have tried several of the workarounds discussed here:
1) unisntall / re-install software - no luck
2) create another mail profile - no luck
3) sync to non MS exchange Outlook datafiles - no luck
At this point, I'm thinking of giving up on ever getting PC suite to work.
A few details:
E71x phone
PC suite 7.1.40.1
The PC has Outlook 2003 and I use an MS exchange mail server
I have never had any nokia products on it prior to my attempts.
Connecting via USB (no errrors or problems reported with this)
Does anyone have a bonafide solution for this? This really sounds like buggy software to me.
Solved!
Go to Solution.

OK, since I haven't seen an answer to this problem, I decided to dig further.
1) Nokia makes another software called OVI suite. It is supposed to replace PC Suite
2) I went to the nokia usa website. No compatability is lised for the E71x.
3) When I went to the europe site, there was so I downloaded v2.0 from there
4) installed it and it works great! Can sync to outlook using MS Exchange
In short, dump your PC suite and go to get OVI Suite. For some reason, more phones are listed as compatabile if you download it from the europe site here: http://europe.nokia.com/support/download-software/nokia-ovi-suite

Flash Builder Loop while pre-launch check

Hi all,
I've just installed a new Flash Builder instance with Coldfusion builder plugin + some other cool features (Subversive, Taskstop...).
I've imported an exisisting project and everything seems to load properly after fixed privileges issues ( for Coldfusion builder and MXML design view).
But still one bigger problem... When i try to launch my project, the progress bar freeze at 6% performing pre-launch check).
There is no error output, so i can't send you any log :S
Don't find any solution on google and it seems that i'm the only guy facing this one
Is there anybody here that can help me ?
Thanks a lot !
Francois

Mmmmhhh... I've finally found how to resolve this issue... but still have issue related to code highlight for Coldfusion files...
Here are the steps i follow to :
1. i've installed Flash Builder 4 as Administrator
2. I've installed ColdFusion Builder as plugin and as Administrator.
3. Right click on Flash Builder .exe and in shortcut -> advanced -> checked the as administrator launch
4. Right click on Flash Builder .exe and in compatibility -> checked "execute as admin".
Now Flash builder launch correctly and i can launch my applications without problems...
Weird.. but it works for me...
Still have to understand why coldfusion file aren't correctly highlighted...
chuss !

Flash Builder 4.7 - Command line ExportReleaseBuild unable to compile to Captive Runtime?

Hi,
I am working on a project with the following setup:
- AIR Desktop running with the ExtendedDesktop Profile with GPU rendermode
- Apache Flex SDK 4.11
- SWF version 18
- Implements the FRESteamWorksNative Extension
- Flash Builder 4.7 Premium is our work enviroment
Our problem is that we can compile the project in Flash Builder manually as Captive Runtime, but when we run it with ExportReleaseBuild in our build.xml, it seems to forget our Captive runtime target and just outputs the installer.
This is our buildscript:
build.bat:
SET FLASHBUILDER="%ADOBE_PATH%\%FLASHBUILDER_PATH%\FlashBuilderC.exe"
%FLASHBUILDER% --launcher.suppressErrors -noSplash -application org.eclipse.ant.core.antRunner -data "%WORKSPACE%" -file "%BUILDXML%" desktop
build.xml:
<target name="desktop">
     <fb.exportReleaseBuild verbose="true" destdir="bin-test" project="ProjectName" basefilename="ProjectBaseFileName" packagetype="native" certificate="Certificate.p12" password="passwordToUse"/>
</target>
.actionScriptProperties:
<buildTargets>
    <buildTarget buildTargetName="default" platformId="default">
      <airSettings airCertificatePath="Certificate.p12" airTimestamp="true" anePathSet="true" version="1">
        <airExcludes/>
        <anePaths>
          <anePathEntry path="steamworks/FRESteamWorks.ane"/>
        </anePaths>
        <newLaunchParams/>
        <modifiedLaunchParams/>
        <newPackagingParams/>
        <modifiedPackagingParams>
          <Parameter name="-target" value="air-captive"/>
    <Parameter name="-extdir" value="steamworks/"/>
        </modifiedPackagingParams>
      </airSettings>
      <actionScriptSettings version="1"/>
    </buildTarget>
</buildTargets>
Any help with this is much appreciated, and if I missed something, please let me know.

Hi,
I've opened bug at Adobe site:
Bug#3801869 - FlashBuilder 4.7 command line fails due to "Exception in com.adobe.flexbuilder.codemodel.CMCoreActivator.s…
please vote on the bug.
thanks,
Erez

Flash Builder & RAD 7.5.5/WAS 6.1/7.0

I'm trying to create a Flex/Java combined wtp project with BlazeDS and creating the first one in the workspace works fine. "Fine" meaning the Flex project and associated EAR proj are created as expected. Now when I create a second combined Flex/Java project the Module/WAR from the new project is automatically added to the old EAR project. Is there any way to force Flash Builder to create a new EAR project based on the project name?
Current Functionality
First Project:
Test1 -> Test1EAR
Second Project(WRONG):
Test2 -> Test1EAR
Desired Functionality
First Project:
Test1 -> Test1EAR
Second Project (CORRECT):
Test2 -> Test2EAR
** My current work around**
1) Create the new EAR project (i.e. Project2EAR)
2) Create Flex/Java combined project
3) Remove the new WAR Module from Project1EAR
4) Add the new WAR Module to Project2EAR
5) Add the application to the WAS server

In order for you to downgrade you need to hava an AVL license, and yes it is possible, you just need to call support.
http://www.adobe.com/volume-licensing/policies.html
Check Backward licensing policy
"Adobe allows program members to order a current-version license but use a prior version. These members can contact Adobe Customer Service to request a serial number for the earlier version if they do not already have one. Prior-version software is available via ESD and can be purchased through standard resellers. The program member must follow all guidelines of the current-version EULA.
Note: This policy is applicable under the TLP and Forms Licensing Program (FLP) as well."
Hope it helps!

Flash Builder 4.6 not launching

Just discovered that Flash Builder 4.6 and 4.5 do not run. Flash Builder 4 does. Get the logo popping up but nothing loading. I'd uninstall the other two versions but I get an error when I go into my program settings and click on my CS package.
Any suggestions?

UPDATE: I contacted Adobe yesterday and they had me do something I would of not thought of.
Run MSCONFIG
On the Services tab click Hide all Microsoft services.
Click Disable all button
Restart your system
Run Flash Builder (It now started)
I closed Flash Builder and went back into MSCONFIG
Uncheck Hide all Microsoft services (if checked)
Click Enable all button
Restart your computer
Flash Builder still worked after this. All is now good.

HT201077 Keep getting this error on iCloud Unable to subscribe. Photos was unable to subscribe to the shared photo stream. I am also not able to share my photos . Started three days ago

Last three days have not been able to share photos on ICloud
We tried to reestablish photostream keep getting they following error
Unable to subscribe
Photos was unable to subscribe to the share photo stream
Any help would be great

Last three days have not been able to share photos on ICloud
We tried to reestablish photostream keep getting they following error
Unable to subscribe
Photos was unable to subscribe to the share photo stream
Any help would be great

Flash Builder 4 crashes on Launch

I get this error message when launching now...
"Licensing for this product has stopped working"... blah, blah
Error: 150:30
Any ideas??

Hi Chris,
I haven't received FB4 Beta SN.
Anyway I've given up on my laptop and have loaded it on my desktop PC which seems to be ok. I say seems because sometimes it gets as far as halfway thru the loading project screen and then crashes I then launch it again and its fine.
The laptop has had both pre-release versions and the final version of Flex Builder 3
The Desktop only has the final version of Flex Builder 2
So I'm guessing it has something to do with the pre-release licenses. Is there any way of clearing these from my laptop?
Regards
Richard.

HT204370 I was unable to locate my movies after i downloaded them. what do i do to locate my movies?

I wasnt able to access my movies after I have downloaded them. what do i do?

My first advice is "Back up the device, then have it replaced." Second item of advice, "Don't forget your passcode."
One of the purposes of the lock button is to recover from certain software failures. Without the lock button, such a recovery is nearly impossible. My advice would have served you best when the malfuction first developed, not after you forgot your passcode.

Topic was archived with no answers: Network Shared Library HELP!!!

I really would like an answer for this one, or a solution, even if third party.
Currently, we've got Windows 2003 server holding all of our MP3s.
Wy wife: Windows XP Pro
Daughter: Windows XP Pro
Son: iMac G3
Self: G4
about to add another iMac in the living room as a sort of "stereo" for parties...
Is there a way to do the following:
1)update library on all computers on network without duplicating songs in folders.
2)allow all computers to see newly added songs to the library regardless of which computer was used for online purchase or CD import

No answer

Unable to disable Network Monitor in Flash Builder 4 Standard

For some reason the Network Monitor is enabled for my Flash Builder project. Perhaps it was enabled when I was running the FB4 Beta 2 version. Now I need to disable the Network Monitor, but of course, since I'm using FB4 Standard the Network Monitor view says I need to purchase FB4 Premium.
All my app traffic is redirecting to localhost:37813 so I know the network monitor is still enabled. Can anyone tell me how to disable Network Monitor in FB4 Standard?
Thanks,
David

Thierry,
I finally figured it out. In Flash Builder close your project. Then in the file system go and directly edit the .actionScriptProperties file. In the main <actionScriptProperties tag edit the includeNetmonSwc="true" flag to be includeNetmonSwc="false" instead. That will stop including the network monitor library in your code and should turn monitoring off.
That setting is controlled by the network monitor tab, but that tab is only visible with the premium version of Flash Builder so it seems once your trial version times out you can never disable it via the GUI, just via the .actionScriptProperties file.
Now reopen your project after saving the changes to .actionScriptProperties and you should be good to go.
David

Flash Builder unable to install Eclipse plug-in

With the latest pre-release version of Flash Builder (12/07/09), I'm unable to install Eclipse plug-ins. I go to the Help | Install New Software... menu option. But it gives you no ability to add a new software site. I also tried Window | Preference, expanded the Install/Update item and then selected Available Software Sites. This also gives you no ability to add a new site. What am I missing?

Wrong forum. You want prerelease.adobe.com.
Jason San Jose
Quality Engineer, Flash Builder

Flash Builder 4 - RemoteObjects

I'm having an issue with remoteobjects in flash builder 4. I built a simple little project to see if I could get remoteobjects working.
I got the project working and the output folder resides on a web server on my local LAN (not the machine with flash builder installed).
Here is the issue I am having...
When I build the app from from flash builder 4 the project launches everything works fine. If I open the URL of the project on the web server from my machine with flash builder 4 on it the project works fine. If I open the URL from any other machine the calls to the remoteobject do not work. I've scoured the web and haven't seen anyone else run into this issue so I'm assuming its something I'm doing wrong.
I am on a trial version of flash builder 4. I just wanted to mention that but I don't see how that could be the issue.
I've tried both methods of defining the remoteobject endpoint (both at runtime as one of the MXML remoteobject properties, and via a services-config.xml using the compiler argument -services PathToConfigFile). In each case the project runs and works fine from the machine with flash builder 4 installed on it but just not any other machine. I've also tried defining the -context-root thinking that may have been the issue still no dice.
Any help would be greatly apprecaited.
I'm not sure how useful the code would be as the project does work but here it is in any event...
APPLICATION FILE:
<?xml version="1.0" encoding="utf-8"?>
<s:Application
xmlns:fx="http://ns.adobe.com/mxml/2009" xmlns:s="
library://ns.adobe.com/flex/spark" xmlns:mx="
library://ns.adobe.com/flex/mx" minWidth="955" minHeight="600">
<fx:Declarations>

<s:RemoteObject id="testRO"source="
TestRO"destination="
TestRO"endpoint="
endPoint.php"showBusyCursor="
true">
<s:method name="say" result="say_resultHandler(event)"/>
</s:RemoteObject>
</fx:Declarations>
<fx:Script>
<![CDATA[
import mx.controls.Alert;
import mx.rpc.events.ResultEvent;
protected function say_resultHandler(event:ResultEvent):void
Alert.show(String(event.result));
]]>
</fx:Script>
<s:TextInput x="73" y="73" id="repeatEntry"/>
<s:Button x="209" y="73" label="Say" click="testRO.say(repeatEntry.text)"/>
</s:Application>
PHP ENDPOINT:
<?php
//Define error reporting for this application.
error_reporting(E_ALL|E_STRICT);
//Set the display_errors in the php.ini
ini_set("display_errors","on");
//Path to the Zend server.php file.
require_once 'Zend/Amf/Server.php';
//require your php class file ('DIRECTORY/CLASS.PHP').
require_once 'TestRO.php';
$server = new Zend_Amf_Server();
//Class name for the server (Same as the php file name).
$server->setClass("TestRO");
//Handle request
echo ($server->handle());
?>
PHP CLASS FILE:
<?php
class TestRO
    public function say($text)
       if($text =="")
   return "+++ Field left blank +++";
    } else {
      return "+++ ".$text." +++";

I've resolved the issue sort of...
I exported a release build then re-tested the application and it works fine. For some reason while the application is in debug mode the remoteobject method calls aren't working on any other machines on the network... I still have no idea why... is this a new feature to prevent folks from using the debug swf's in production?
In flex 3 I'd give the PROJECT-debug URL to my manager so he could track my progress but I was using the httpservice class and it worked without issue. In any event if someone knows the answer or has any additional information it would be greatly appreciated.
Thank-you.

Flash Builder is an Unprofessional Beta

In Spring of 2011, I was very excited at the fact that we would be using Adobe Flash Builder 4 in a semester-long software engineering class project at a leading university. I had used many Adobe products in the past and was very happy with them, particularly Photoshop, Illustrator and Dreamweaver. I had also been wanting to learn ActionScript/Flex, and this project would give me the opportunity. However, after extensive use of Flash Builder, I have realized that this product was the biggest let down since Windows Vista.
There were several people working on the same project using Subversion. In addition, we would have a lab session once a week using different computers, so it was necessary to frequently import projects into Flash Builder. Importing Flex Projects was the most annoying and time consuming aspect of many. Firstly, when one selects the import option, a dialog is presented and is positioned mostly off screen. It is necessary for one to drag the dialog to the screen manually every time. In addition, the path of recent projects is not saved, so one must manually navigate to the proper directory each time. Since there were so many problems with projects falling apart, many imports were necessary. It is necessary to manually navigate through the long hierarchy of directories to reach the project. This is very time consuming and unproductive.
After the import, the project will not run because of some problem finding the HTML files. It was necessary to create new projects from scratch and do a lot of copying/pasting until a team member directed me to delete the html-template directory. I am not sure how he came across this tip, as I had searched the Internet for solutions to no avail. One more tedious step is necessary. The html-template directory needs to be recreated, and the only way, at least that I see, is to rebuild the project, then after the error appears in the Problems window, right-click the error and select Recreate HTML Templates. That’s quite a bit of work, and maybe there should be an explicit option to recreate HTML templates that’s not buried as a right-click option in the errors list.
This leads to the next problem. Errors do not appear in the code until the file is saved. Every time I type in a new statement, it is necessary to save the file in order to see if there are any errors. This is very counterproductive. In addition, it would be much more productive to add a feature in the code hints that would allow for mouse wheel scrolling. It takes much longer to navigate through the hints without this feature.
Another problem related to importing projects is with executing it. Sometimes after importing a new project, a dialog displays that says that it may be necessary to restart the browser. This turned out to be a huge problem, as I frequently have many, many Firefox tabs/windows open at a given time. It is very unproductive to restart Firefox several times until the project finally imports correctly. Sometimes it will work without restarting, however, and I cannot pinpoint any differences between when it works and when it doesn’t. This may be related to the Flash plugin as opposed to Flash Builder.
This leads to another problem. For testing purposes, sometimes it is necessary to locally run the HTML file in the bin-debug directory. Even after a successful import and rebuilding of the HTML template, the Flash content will not load at all – just a blank screen. Sometimes the content will load, but it will not function correctly. If I upload the files to a live web server, it works just fine. However, sometimes it is necessary to run the HTML files locally, and it is very inefficient to have to upload/run to/from a web server.
After all the trial and error of simply importing a project and when you think you’re making progress, something happens to the project along the way. All of a sudden when you try to execute an MXML application, which is in the same directory of several others, only one certain MXML application decides to run (when you are trying to run another one). The only workaround that I found is to either bring up a backup or create a new project and copy/paste the code. This is highly unproductive.
All the inefficiencies and bugs in Flash Builder made it necessary for me to make constant backups. When a project fell apart, I had to open a backup and copy/paste the code. This was a lot of wasted time. In addition, I learned early on not to count on Flash Builder when presenting or making minor, last minute changes before a presentation. Flash Builder always managed to encounter some strange problem.
Flash Builder is unreliable and highly inefficient. I love Adobe products and Flash is great, but at this time I can no longer use or support Flash Builder, and I could in no way justify its purchase in the future until most of these bugs and inefficiencies are fixed. It has potential, and could be a great product if this were the case, but in my experience I spent more time overcoming bugs than coding. When something would not work right, I first had to determine whether it was a bug in my code or a bug in Flash Builder. If Adobe needs an engineer to fix some of these seemingly simple issues, I would be willing to take on the task for the sake of saving this potentially amazing product.
[email protected]

it's a beta. it stunk. but they put it out for review which helps Adobe and others. But never treat those products as stuff to base your serious work around. Flex3 is stable. FB4 is 90% reliable. Things are still broken in it.
btw if it was a leading university why in the world would they base it around a Beta that was buggy or was that your decision ?
now, since I helped, please give me my 5 or 10 points.

Flash Builder 4.7 executable launcher was unable to locate its companion shared library

Similar Messages

Maybe you are looking for