Flash Builder 4.7 mac , after upgrade to adobe air 13/14 wont create new projects

im running flash builder 4.7 on mac, and recently upgrade to a newer air, this was sad in itself as flash builder dosnt have a mechanism for doing this you have to paste files all manually all over the place.
Im now running into an issue where I cannot even create projects.
Has anyone had this issue? does anyone know how to solve?
Thanks

Called support had the pleasure of a really long wait time.
first level tech support stated this was a "known issue", got transferred to another sr technician who was going to fix this, didn't have a clue about the previous conversation and the call dropped. I don't have the patients to wait on hold nearly an hr again.
Adobe, if this is a known issue please post a sticky somewhere or assign someone to reply to the community posts.
If anyone else has the answer to this, that would be much appreciated, Im kind of loathing flash builder at the moment and resenting the fact i can't run flash develop natively on mac.

Similar Messages

  • Flash Builder failed to lunch after installation.

    Adobe Flash Builder can't lunch after installation completed successfully. it says to uninstall and reinstall again. if problem continues, contact adobe support. and it says: "error: 5"
    ~ Then after I uninstalled it. Download it again and reinstall again, same result.  I did this numerous times now and no tech solutions so far!
    What is going on here and how to fix this? 

    don't worry, it works now, after i rebooted the machine.

  • I'm stucked on APPLE evolution bar when I restarted my Mac after upgrade to Yosemite. I Can't access on my computer.

    I'm stucked on APPLE evolution bar when I restarted my Mac after upgrade to Yosemite. I Can't access on my computer.

    Good Question.
    I downloaded Yosemite a while ago, but didn¹t install it because it would
    knock out several applications such as Solitaire till Dawn But finally
    when some apps wouldn¹t work with my current version of Safari I thought I
    would upgrade Safari but they wouldn¹t work with the OS I was using so
    suddenly I had no Safari and was worse off than before. So I bit the bullet
    and upgraded to Yosemite with the earlier version I already had. Not pleased
    when iPhoto didn¹t work, and it also coincided with an national email outage
    here in Australia by the major carrier so no email either.
    Experience has taught me that it gets sorted out in the end but in the
    meantime...
    And the lesson is [

  • Where to get flash build 4 for Mac?

    I have the serial number for flash build 4. But I don't delete my flash build installation in my Mac. Now I got problem about my flash build 4.0. And I can not find where to download the flash build 4 for mac. All are flash build 4.5.
    Can I use my serial number with flash build 4.5 for Mac? or can anyone send me a link to download the flash build 4 for Mac?
    Thank you for help.

    PK,
    Theres an eval version here of NWDS, WAS 6.40, EP6:
    https://www.sdn.sap.com/sdn/downloadarea.sdn
    Select 'Web AS' from the 'Available Downloads' menu and select:
    'SAP NetWeaver Enterprise Portal on MaxDB, Developer Edition Sneak Preview - Web Application Server Java 6.40 with MaxDB, Developer Studio'
    You might also need winrar to extract (if extension is .rar). You can download a command line version for free from here:
    http://www.rarlab.com/download.htm
    Cheers,
    Steve

  • Duplicate emails on outlook for mac after upgrading to mavericks

    I was getting duplicate emails on my outlook for mac after upgrading to mavericks
    After reading several websites,  I realise this is a common problem.
    some people suggesting checking " prevent app nap"
    this seemed to work for a while, but is now back again
    it is very difficult to handle, with hundreds of emails downloading each time i log in
    regards
    seema

    Try looking/posting here.
    Microsoft Support – Office for Mac
    Microsoft Support – Office for Mac (2)

  • Problems after upgrading to Adobe Digital Editions 4.0.3 and borrowing books from a library??

    After upgrading to Adobe Digital Editions 4.0.3, I am having problems downloading borrowed library books to my nook.  I get the message 'This book has been returned.  Loan not on record.'  It worked fine before the upgr

    After upgrading to Adobe Digital Editions 4.0.3, I am having problems downloading borrowed library books to my nook.  I get the message 'This book has been returned.  Loan not on record.'  It worked fine before the upgr

  • After upgrading iPad 2 to iOS 7 , cannot open new tabs in safari . When pushing on " " , Safari close the application .

    After upgrading iPad 2 to iOS 7 , cannot open new tabs in safari . When pushing on " " , Safari close the application .

    Try a Restart. 
    Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
     Resetting your settings
    You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
    Resetting your device
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
    Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple. 
    Here is a link to their contacts with most of the information below. 
    http://www.apple.com/contact/

  • Who can shed some light on my ongoing connection problem. After upgrading my iPad Air with IOS 7.06, I could no longer connect to the internet. I have 2 MacBooks Air, 1 ipad mini and one iPhone 4S running on the same network, and they are all connected to

    Who can shed some light on my ongoing connection problem.
    After upgrading my iPad Air with IOS 7.06, I could no longer connect to the internet.
    I have 2 MacBooks Air, 1 ipad mini and one iPhone 4S running on the same network, and they are all connected to the net and function well.
    So I cleaned up the ipad completely, installed the latest firmware and reinstalled my apps : no connection.
    I tried all things of resets and forgets. No result.
    I have been fondling with my Airport Extreme 5 , but that did not help much.
    This morning I went to a neighbor , hooked my ipad air on his network, typed the password and the thing all worked fine.
    I have tried to connect the ipad air as an ethernet client, but that did not work. „Not enough power“ was the statement
    Ideas anyone ?

    Yes I tried this manyfold. But did not work.  Reading on, I took Tesserac's advice. Shut down router and computer.
    Start router after 15 minutes and wait another 10 minutes before starting the computer.
    Et voila.... everything is back in working order,
    Regards form Curacao, Dutch Caribean.
    Pete van Linden

  • PDF's won't print in Internet Explorer after upgrading to Adobe Reader 11.0.03

    PDF's won't print in Internet Explorer 9 after upgrading to Adobe Reader 11.0.03.
    The print dialogue box won't open....nothing happens.
    Desktop OS is Windows 7 SP1.
    Randy Heil

    Two obvious troubleshooting techniques are to delete and re-install the printer driver (or updating printer driver) and fixing the installation of Acrobat. Have you given those a try?

  • After upgrading my Macbook Air to OS Yosemite it doesn't recognise the 3G USB modem which was working previously. Any ideas

    After upgrading my Macbook Air to OS Yosemite it doesn't recognise the 3G USB modem which was working previously. Any ideas?

    Hi ..
    Reset the PRAM > About NVRAM and PRAM
    Those instructions are for Mavericks but will work on Yosemite as well.
    Then try the USB modem.

  • No recognition of special characters after upgrading to Adobe Reader X

    Hello all,
    we  use a document-manager-software "Accantum" to scan and to archive PDFs.  After upgrading to Adobe Reader X no german special characters (e.g.  äöüß ...) are recognized by the document-manager.  All words with  special characters look fine on screen or printer, only the recognition  by the document-manager outputs either "%" or no character in the  destination-PDF-file. Scanning a version 9.x - PDF is still working  fine.
    Please give me a little hint
    Thanks. Stephan

    I don' think so, cause AR 9x -documents of the identical source are recognized absolutely correct and the error occurred exactly after upgrading to AR X (10.0.1).
    Perhaps there is a way to look into the OCR-Text embedded in the PDF-file?
    Thanks
    Stephan

  • Lockups after upgrade to Adobe Reader 8.2.3

    System is locking up after upgrade to Adober Reader.
    windows XP pro fully service packed
    SeaMonkey v 2.05
    AVG free v9 latest
    Spybot S&D 1.6.2 (i think) latest
    Spyware Blaster, latest
    etc
    Anyone else seeing this?
    Thanks
    Mike

    I found a solution...
    In main.cf I've change the line
    mailbox_transport =
    with
    mailbox_transport = dovecot
    I also found a second similar line which I removed.

  • After upgrading my ipad to ios6 it wont start why?

    after upgrading my ipad to ios6 it wont start why?

    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/TS1275
    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
     Cheers, Tom

  • Loss of AP signal strength after upgrading to Clean Air on 5508's.

    After upgrading three 5508's (which support 150 AP's) from WLC/WCS version  6.0.182.0 to version 7.0.98.0, our users complained about low signal strength.  Our pre-upgrade RSSI benchmarks confirmed a decrease of -10dB to -20dB signal strength across all AP's, effectively causing wireless networking to be unusable in key areas.
    After confirming our Global signal strength settings in WCS and WLC's were still at the same settings they were at prior to upgrading, we contacted our VAR for advice.
    He suggested that perhaps the upgrade caused all AP's to run at a lower signal strength.  He was right.
    At his recommendation, we reconfigured the WCS to set two AP's to use Individual mode instead of Global mode.  This is found in Radios/802.11b/g/n/Tx Power Level Assignment.  Setting them to level 2 resulted in an average -15dB increase of RSSI, solving our problems in the test environment.  In one case we saw an increase of -30 dB for one AP.
    The signal strength loss due to the upgrade was not expected, based on the upgrade documentation.  Now we must change the settings manually on the remaining 148 AP's.
    I'd like to hear from anyone else who has experienced a decrease in signal strength after upgrading to Clean Air 7.  If you have information from Cisco that documents this problem, I'd REALLY like to read it.
    Hoping this may help you,
    RS

    Hi Rick,
    this is not "expected" or "on purpose". It just happens that improving the RRM algorithm makes things better for 90% of the people but maybe worse for 10% of the people.
    This is why you can set the Tx power treshold on the RRM or set the overal RRM algorithm sensitivity.
    If you put the Tx power treshold to a louder number (=closer to 0) then the APs will reduce less their power level.
    Hope this helps.
    Nicolas
    ===
    Don't forget to rate answers that you find useful

  • Hi, After I try to load either an existing or new project in Adobe Premier Elements 9 I just get a blank grey screen with none of the timeline, etc. boxes on view. This has suddenly happened, one day OK next not! At the top of the screen I get the normal

    Hi, After I try to load either an existing or new project in Adobe Premier Elements 9 I just get a blank grey screen with none of the timeline, etc. boxes on view. This has suddenly happened, one day OK next not! At the top of the screen I get the normal Pre icon, File, Edit, Clip, etc.
    I am planning on purchasing Premier Elements 13, would it be better if I bought a new program rather than download an upgrade, just in case the upgrade doesn't load properly due to the error with my existing program?
    If I the deleted Premier Elements 9 on my PC would I lose all my existing videos that were produced using Premier Elements 9 or would they be saved so that they can still be worked on in Premier Elements 13?
    Does Premier Elements 13 work with Windows 7?
    Thanks
    Terry

    Premiere Elements 13 absolutely works with Windows 7!
    In fact, I'd highly recommend you download the free trial and give it a test run.
    Meantime, go to Windows Update and make sure you have all of the latest Windows updates, including those that don't install automatically. Then go to the nVidia or ATI site and ensure you have the latest driver for your graphics card, and go to Apple.com and ensure you have the latest version of Quicktime, per the program's requirements.

Maybe you are looking for