Flash Builder - change the why imports are added

Hello,
Flash Builder groups imports by package (which is great) and puts a white line between package groups (which is not so great).
e.g.
import mx.collections.ArrayCollection;
import spark.events.IndexChangeEvent;
This can be very annoying when there are many imports - at least for me.
Is there anyway I can customize this?
Thank you.

Similar Messages

Why do computers change the list they are in?

I have created several list of computers in ARD 3.4. Several computer names change the list they are in in. Each mac has a unique share name. I cannot figure out why they would change list. Any one that has any suggestions please help. Thank you in advance.

Are they smart lists, or regular lists?
This sounds like buggy behavior to me, which is not unheard of in ARD. Perhaps try deleting your clients and re-adding, although I know that's a pain if you have more than a couple dozen Macs.

The condition you are adding has caused the query to be invalid.

I select a column from the structure query: DATA_SET_ID [RDF_STATEMENT]
I enter a condition: = :P_RSTA_RDSE_ID. (This refers to a hidden field on the page. I have confirmed that the correct value is passed.)
I click on 'apply changes' and the page returns:
1 error has occurred
* The condition you are adding has caused the query to be invalid.
Previewing the condition gives: (("RDF_STATEMENT"."DATA_SET_ID" = :P_RSTA_RDSE_ID)) which looks fine.
I've tried a literal - (("RDF_STATEMENT"."DATA_SET_ID" = 1)) - and get the same error.
I've tried converting to an unstructured query and get 'no data found' where the same query in SQL+ returns the desired rows.

Mak,
I will log this as a bug. You may have to recreate the report. Sorry about that.
Scott

I can't install Flash Builder from the Web Premium suite, what should I do?

I just downloaded the Adobe Creative suite 5.5 Web Premium and am about to install the program but notice a note next to the Adobe Flash Builder program... it explains that my system doesn't have the requirements needed for this program. I checked and it explains further details stating that I need to have a • Mac OS X v10.5.6–10.6 and I doubled check which version I have and it's OS X 10.5.8. Doesn't this actually mean that it does meet the requirements?
Please advise as to what can be done to be able to download this specific program.
Thanks,
     Sarah-Kay

ok,
so for the memory:      it's 4 GB 1067 MHz DDR3 and when I click to
install the programs it says (Macintosh HD: 10,0 Go (459,5 Go
disponible).
As for the processor: it's 2.66 GHz Intel Core 2 Duo
Monitor resolution:    1920 x 1200
Le 12-02-28 à 17:35, Jeff A Wright a écrit :
Re: I can't install Flash Builder from the Web Premium suite, what
should I do?
created by Jeff A Wright in Downloading, Installing, Setting Up -
View the full discussion
We do still need more information such as how much memory you have,
resolution of your monitor, how much disk space you have free, which
processor are you using. I good guide is to look at the system
requirements and try to post for each of the items within the
requirements. The system requirements for Web Premium can be found
at http://www.adobe.com/products/creativesuite/web/tech-
specs.edu.html.
>
Also you can find this information within your System Profiler. The
easiest way to access the system profiler is to go to the Apple Menu
and select About this Mac. Once selected clicking on the more info
button will launch the System Profiler.
Replies to this message go to everyone subscribed to this thread,
not directly to the person who posted the message. To post a reply,
either reply to this email or visit the message page: [http://forums.adobe.com/message/4235635#4235635
To unsubscribe from this thread, please visit the message page at [http://forums.adobe.com/message/4235635#4235635
]. In the Actions box on the right, click the Stop Email
Notifications link.
Start a new discussion in Downloading, Installing, Setting Up by
email or at Adobe Forums
For more information about maintaining your forum email
notifications please go to http://forums.adobe.com/message/2936746#2936746

In Blackberry Z 10 "HUB MANAGEMENTS", automatically changes the items that are included in my main View of the Hub Managements.

In Blackberry Z 10 “HUB MANAGEMENTS”, automatically changes the items that are included in my main View of the Hub Managements.
I really don’t know how it happens, “Off or On” thing, without knowing me. When any Email hits to my device and not shows in my “HUB MANAGEMENTS”, at that point of time I come to know, it’s Off again.
Then whole process again, I go in “HUB MANAGEMENTS” and switch it on again and again.
I need Blackberry Z10 OS developers focus on this issue…

I can confirm this behaviour and it defeats the purpose of having a hub.
Could a BBTA confirm that this has been filed or even solved internally?
Olivier - interfaSys ltd
Developing for BlackBerry 10 devices using the Sencha Touch framework.

HT201303 I want to change the email you are sending confidential answer him

I want to change the email you are sending confidential answer him

first of, if you also don't remember the alternate email you have registered it to, the only available option is:-
you can only reset/update them (security questions) by CALLING the apple support team..
don't worry, they are very polite and friendly.. =))
all u need to do is verify their questions..
BUT
(1) make sure you don't signed out of your apple ID;
(2) prepare you apple device’s serial number;
and also,
(3) be sure you are connected to the internet, so that u can help the speed up the "verifying" process..
it only took less than 20minutes to have my security questions reset without losing the balance in my apple ID ^__^
hope this helps.. merry christmas y'all ~.~

Change the Credit control area with balances

Hi,
The requirement is there are two credit control areas, XX10, XX12. Now they want only one credit control area ie XX12,( all customers which are in XX10, should be now with XX12 credit control area) but when changing the credit control area of a particular customer from XX10 to XX12, the credit limit and exposure is not displayed in new credit control area. ( Tcode Fd32)
How can we upload all customers and balances to new Credit control area.
Thanks
SM

Hi
Please see note 335295 which can help you
with kind regards
Cora

HT3805 I just installed Aperture 3 from a CD. i also imported my photos from my Iphoto library. After importing most of the photos imported are blurry and it tells me the program is "processing" and it never stops. What do I do?

I just installed Aperture 3 from a CD. i also imported my photos from my Iphoto library. After importing most of the photos imported are blurry and it tells me the program is "processing" and it never stops. What do I do?

I just installed Aperture 3 from a CD. i also imported my photos from my Iphoto library. After importing most of the photos imported are blurry and it tells me the program is "processing" and it never stops. What do I do?

Posting Different APC without changing the Book dep area APC

Hi All,
I am trying to post in ABSO different APC amount for different depreciation areas. I am able to post either increase or decrese of amount in APC for all the areas.
The screen in ABSO requires an amount to be posted, which can be changed for different depreciation areas.
My requirement is not to change the book dep area posting, i.e. "0" is to be posted for Book deprecaition area, and either positive or negative values for remaining areas depending upon the transaction type.
Can anyone help with this.
Thanks in advance
Krishna

Hi,
    In SPRO
    AA>Transactions> Aquisitions> Define Transaction types......
    Copy the TType that you would usually use to a new one.
    Then use "Limit Transaction Types to Dep.Areas" to restrict it to the Areas
    that you want to post to.
    Use this Ttype in ABSO then area 01 will not be posted to.
Kind regards

How can I change the order SubVIs are loaded?

Hello,
I have a SubVI which needs to be called before any other SubVI. I tried to put that SubVI in another VI which again calls a second SubVI with the rest of the application:
MainSubVI --- call ---> 'Need-to-be-loaded-first-VI'
|
'- call ---> 'Start-VI'
|
'- call ---> 'Rest-of-application-VI'
The problem is that there is one SubVI - saved in 'Rest-of-application-VI' - which is loaded before the 'Need-to-be-loaded-first-VI'.
How can I change the order SubVIs are loaded?
Thanks,
Johannes

Hai,
If you wish to load the VI into memory or block the VI from loading the memory immediatly after the parent VI loads....Use "Call by referance Node" with call setup as "Reload for each call" which will load theVI into memory only when the VI is supposed to execute.
With regards,
JK
Message Edited by JK1 on 09-10-2008 05:07 AM
With regards,
JK
(Certified LabVIEW Developer)
Give Kudos for Good Answers, and Mark it a solution if your problem is solved.

Composed looks / Change the look themes are missing when creating site from saved template

Hi,
I found an issue when save you own site template and then want to create a new site from that template the "Change the Look" themes are missing and if you go to site settings, Comosed looks where the themes are stored is empty! Anyone else has
the same experience? Any workaround for this?
regards
Martin

I've just seen this exact problem on a SharePoint 2013 farm as well this morning, but have managed to fix the blank "Composed Looks" list issue, although am still working on the "Change the look" wizard pages.
Edit: found a fix for this too now. See my next post below.
It appears that the process of saving a site as a template and then creating a new site from that template causes the original XsltListViewWebPart used to display the default view of the "Composed Looks" list, to be replaced with a ListViewWebPart,
which appears to be broken.
Edit: have also seen this behaviour on sites created from the built-in templates but haven't determined exactly whether this is a bug. ULS logs never show any errors when this occurs so it appears to be "by-design". Ugh.
There may be a tidier way to fix this, but for now, I used SharePoint Designer 2013 to copy an XsltListViewWebPart from a working "Composed Looks" list, AllItems.aspx page and replaced the ListViewWebPart in the broken Composed Looks list, AllItems.aspx
page with it. There is also some additional post copy-paste tidy up to do on the pasted-in XsltListViewWebPart HTML to get it to work within the context of the site it is now in as it will contain GUIDs and URLs that are only relevant within the site
that you copied it from and these need to be replaced with the GUIDs/URLs from the replaced ListViewWebPart - paste it in a notepad session before deleting/overwriting it so you can grab those bits.
I'll write a more detailed step-by-step if anyone wants it, but this doesn't seem to fix the broken "Change the Look" wizard still, only the "Composed Looks" list default view. I'll look into that now and post back more complete solution if I can
find a fix.
Edit: Found a fix. see my next post below.
Edit Edit: One more thing - on some Composed Looks lists we are seeing empty lists once the default view webPart is fixed up. To correct this, you can copy selected Composed Looks from a working site with a full set.
Before you do that, edit the default view in both the source and destination Composed Looks lists and include the Title field as it is a required field.
Then, you can use Datasheet View (just click the edit list link to put it in Datasheet View mode) to bulk copy/paste Composed Looks between the source and destination lists.
Do a little post-paste tidy up on the URLs as above to make sure that they are correct for their new location and then click on over to your Change the Look wizard.
You should see all of your Composed Looks displayed nicely on the page.
Note that the Current Look might not represent the sites actual appearance as it's settings will reflect the source sites appearance, but you can tweak it with the Wizard now.
Regards,
Glenn
Can you confirm your sharepoint patch level?

In the Flash Builder Plugin version, why did it install another "alternate Eclipse"?

In the Flash Builder 4 Plug-in installer I just ran, why did it install whats seems to be another copy of Eclipse in my "C:\Program Files (x86)\Adobe\Adobe Flash Builder 4 Plug-in" folder, along with a shortcut called "Run Adobe Flash Builder 4 Plug-in with alternate Eclipse"?
I was only expecting a plug-in in my current Eclipse installation. What is going on here?

Hi Pup500,
FB4 Plug-in comes bundled with the full Eclipse 3.4.2 (Ganymede) Package for Java Developers, and also supports linking FB4 to your own copy of eclipse 3.5 (Galileo) or 3.6 (Helios).
We considered bundling one of the larger Packages (Eclipse for PHP Developers, etc.), but wanted to keep the footprint smaller, and the package for Java Developers was the smallest one that still includes the JDK.
The shortcut for the "alternate" should point to your own copy of eclipse, and the default launcher shortcut should point to the bundled copy under the subfolder \eclipse-host-distro. The default shortcut will launch eclipse/FB4 using our bundled copy of the JRE, but the alternate shortcut assumes that you either have a compatible JRE installed system-wide, or that you have a valid JRE folder in your eclipse folder.
Some of the reasons we started bundling eclipse with FB4 Plug-in were:
- the custom configuration (ini file settings, memory allocation, etc.) provided in the bundled copy of eclipse can be used as a guide for optimizing your own eclipse configuration, for improved performance with FB4.
- on Win, we bundle a compatibility-tested version of the JRE for use with the bundled copy of eclipse. This can come in handy on 64-bit Win, as we provide a 32-bit version of the JRE compatible with FB4. You can copy this same JRE folder into your own copy of 32-bit eclipse, if you wish to avoid installing a system-wide version of 32-bit java.
- if you encounter any version or bundle conflicts with your own copy of eclipse, you can still run the bundled copy as a fallback, until any problems are resolved.
Out of curiosity, which version and package of eclipse are you plugging into?
-Chris

Two ways to change the DPI that are resulting in different outcomes... WHY?

I'm really having a hard time here, and I'm hoping someone can explain what I'm missing.
Because I like iPhoto's crop feature better then ACR or PS, I decided to add it to my process at the very end. Basically saving as a PSD, importing into iPhoto, cropping, and exporting the file back out in JPG or PSD format... The only catch is that iPhoto loves 72dpi, so I would have to add one more step to up the dpi using the Process Multiple Files feature in PSE6.
Problem - After I batch the files to 300dpi using the Process Multiple Files feature, everything went out of wack. For example, File 001.psd started out at 2848x4288, 33.7MB, and 240dpi. Once imported into iPhoto, cropped, and exported, the psd file was at 2458x3686, 25.1MB, and 72dpi. Then after the batch process the psd file is at 10242x15358, 310MB, and 300dpi.
Now if instead I take the 72dpi psd file and open it up in PSE6, go to image/resize/image resize, then change the Resolution number from 72 to 300 under Document Size, the file comes out to 2458x3686, 25.3MB, and 300dpi.
Are the two attempts to change the DPI not the same?
What am I missing here?
My goal is to end up with a 300dpi Max jpg image from the cropped files I exported from iPhoto, without them being way oversized. One would assume this is a straight forward process, no?
What am I missing?

Obviously, the two processes are not the same.
You didn't tell us what you did, what options you selected, in Process Multiple Files, so its hard to tell what you did wrong.
There's absolutely no reason to change the dpi, it is a meaningless number for screen display. The only time it matters is when you go to print, and since you didn't mention printing at all, I would recommend just forgetting this idea of batch changing dpi. It has no value whatsoever.

Can't open Flash Builder - "See the log file" error.

I have been using Flash Builder 4.5 and for some reason it has stopped opening correctly - I get the following error then it just shuts down.... :
"An error has occured. See the log file."
and if i check the log file it refers to then i see the following text:
!SESSION 2011-06-22 13:53:43.658 -----------------------------------------------
eclipse.buildId=M20100909-0800
java.version=1.6.0_16
java.vendor=Sun Microsystems Inc.
BootLoader constants: OS=win32, ARCH=x86, WS=win32, NL=en_US
Command-line arguments: -os win32 -ws win32 -arch x86
!ENTRY org.eclipse.osgi 4 0 2011-06-22 13:53:59.598
!MESSAGE Application error
!STACK 1
org.eclipse.swt.SWTError: No more handles
    at org.eclipse.swt.SWT.error(SWT.java:4109)
    at org.eclipse.swt.SWT.error(SWT.java:3998)
    at org.eclipse.swt.SWT.error(SWT.java:3969)
    at org.eclipse.swt.widgets.Widget.error(Widget.java:468)
    at org.eclipse.swt.widgets.Control.createHandle(Control.java:633)
    at org.eclipse.swt.widgets.Composite.createHandle(Composite.java:305)
    at org.eclipse.swt.widgets.Control.createWidget(Control.java:649)
    at org.eclipse.swt.widgets.Scrollable.createWidget(Scrollable.java:134)
    at org.eclipse.swt.widgets.Control.<init>(Control.java:110)
    at org.eclipse.swt.widgets.Scrollable.<init>(Scrollable.java:75)
    at org.eclipse.swt.widgets.Composite.<init>(Composite.java:95)
    at org.eclipse.ui.splash.BasicSplashHandler.getBundleProgressMonitor(BasicSplashHandler.java :159)
    at org.eclipse.ui.splash.BasicSplashHandler.getContent(BasicSplashHandler.java:265)
    at org.eclipse.ui.internal.splash.EclipseSplashHandler.init(EclipseSplashHandler.java:86)
    at org.eclipse.ui.internal.Workbench$8.run(Workbench.java:782)
    at org.eclipse.core.runtime.SafeRunner.run(SafeRunner.java:42)
    at org.eclipse.ui.internal.Workbench.createSplashWrapper(Workbench.java:798)
    at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:2467)
    at org.eclipse.ui.internal.Workbench.access$4(Workbench.java:2438)
    at org.eclipse.ui.internal.Workbench$7.run(Workbench.java:671)
    at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:332)
    at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:664)
    at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149)
    at com.adobe.flexbuilder.standalone.FlashBuilderApplication.start(FlashBuilderApplication.ja va:108)
    at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:196)
    at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLau ncher.java:110)
    at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.jav a:79)
    at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:369)
    at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
    at java.lang.reflect.Method.invoke(Unknown Source)
    at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:619)
    at org.eclipse.equinox.launcher.Main.basicRun(Main.java:574)
    at org.eclipse.equinox.launcher.Main.run(Main.java:1407)
This is incredably frustrating as you can imagine as it effectively means i cant work anymore, it is clearly some kind of problem with eclipse but i have no idea what.
I have tried re-installing Flash Builder twice and no luck.
Can anyone help with this???
Thanks !!!!
Elliot.

There is a similar thread with exact same stackstrace and problmes reported with earlier verison of FB. You can check it here http://forums.adobe.com/thread/832073. Thre is also representation of Adobe engineers on this thread. Aprarenlty there are certain updates(Eclipse / java) that FB doen't encourage, post FB is installed in stanadlone mode and workarounds are suggested on this thread to overcome this problem. If you are workign in plugin environment with FB, I guess updates are not affecting FB installtion. Please try out the solutions presented on this thread and let us know.

How do you change the fields that are displayed on the email preview list after a search?

How do you modify the fields that are displayed in the mail preview list in the center column of Mac mail after you conduct a search of your email? All of a sudden the displayed fields changed on me whenever I do a search in mail. When I have not filtered my email with a search, the default field shown in bold at the top of each message's preview is the "From" field. However, when I do a search this changes to the "To" field. Can anyone help? Thanks, ccarey

ipicus
But why would you want this?
iTunes is responsible for the File Management, let it get on with it, you do your organisation in the iTunes window. And everything you need to do, you can do via the iTunes Window. Want to find the file of a track quickly? Right click on it in the iTunes Window and select Show File: A finder window pops open with the file already selected.
Regards
TD

Flash Builder - change the why imports are added

Similar Messages

Maybe you are looking for