Flash builder white screen issue

Hi All,
I have create one normal project.There is no issue but after run that project i got one issue that is White screen Issue.......i have updated flash player but cant fint that problem ....any one Tel me the reason.
Thanks
Prabu.a

After further investigation, we found out that we were defining a few of our namespace by referencing directly the packages of our custom component instead of creating a clean namespace as recommended by the flex documentation. Using the package definition works just fine when it is local but our component were located in a swc library.
We were doing this :
xmlns:foo="com.mCompany.controls.foo*"
instead of generating an xml manifest and basing our namespace on it
xmlns:foo="http://com.myCompany.controls/foo"
We think that flash builder was slowing down because each and every time we were loading up an mxml it had to rescan the said package.

Similar Messages

White screen issue on Compag

My Compaq is currently displaying only a white screen. The laptop boots up fine and displays fine on an external monitor.
I have taken it apart and reseated the connectors on both the screen and the motherboard with no effect. So I am sure it's not a loose connection.
Before I go and splash out on a new replacement screen, is this an issue that is usually seen when the screen itself is at fault. Could it be the cable? or the connection on the motherboard itself. Is there a way to be certain?
I don't want to buy a new screen and find it's not at fault.
Many thanks!

Hello, @Skyfox
Welcome to the HP Forums.
I see that you have a white screen issue with the notebook. I will try to assist you.
With the steps you've taken and the fact it works correctly with an external, leaves only the display screen as the possible cause. That being said, there is no 100% way to know that it is not a cable causing the issue.
Typical steps for this issue:
Restart notebook
Hard reset notebook
Test with external monitor
Reconnect LCD cables and check all other display cables
Have notebook serviced.
You're at the point of service. This really limits the options, and a display replacement may not correct the issue.
I hope this adds any insight to the choice you need to make next.
Thank you for posting on the HP Forums.
I worked on behalf of HP.

Trying to start my IMac click on my admin icon and enter the correct password but then flashes to white screen and back to sign in, my desktop wont come on ... help!!!!

Trying to start my IMac click on my admin icon and enter the correct password but then flashes to white screen and back to sign in, my desktop wont come on ... help!!!!

Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
When the menubar appears select Terminal from the Utilities menu. Enter resetpassword at the prompt and press RETURN. Follow instructions in the dialog window that will appear.
Or see Reset a Mac OS X 10.7 Lion Password and OS X Lion- Apple ID can be used to reset your user account password.

Creative Zen X-fi (with lan) white screen issues

?Hello everyone, So I've been having my zen x-fi for a few months and it has been working excellently...until yesterday when it suddently (after what might have been a lightly hit, I had it in my front pocket and bumped in lightly into some object)...well suddently the screen went white but kind of still something black there (see photo below) <a rel="nofollow" target="_blank" href="http://img40.imageshack.us/img40/666/dscf2249redigerad.jpg"]http://img40.imageshack.us/img40/666/dscf2249redigerad.jpg[/url] I have been looking into troubleshooting about this particular issue, but what is suggested there under the white screen-issue is to reset and update firmware, something I did already first thing after it happened. The thing is that other than the screen being a quaking mess, it seems to otherwise be in working condition, because when I turn it on and push the play button music will still play as before. it's just the screen that is the problem. Any ideas? Best wishes, Babba

Hello there, thank you for your welcome. That is sad info about my music player though, I liked it so much while it was still working. unfortunately im not within the warrant period so I will have to invest in a new one. thank you for your help though. I will look into which creative player is the best one within my price range

I-Pod Keeps Flashing A White Screen.HELP!

Every time I turn my i-Pod on it flashes a white screen with an i-Pod with a sad face on it and below it it reads," www.apple.com/support/ipod". Why is it doing this? The problem just started happening recently. Please, someone help me!

First try the standard reset.
http://docs.info.apple.com/article.html?artnum=61705
If that does not work, connect the iPod to the computer. Does iTunes see it? If so, try using the Restore button on the iPod's Summary tab (in iTunes). This will erase it and restore its original settings.
If that does not fix the problem, it is likely that that the hard drive has gone bad.

FLASH OF WHITE SCREEN

UNPLUGGED MAC ONE WEEK AGO.
PLUGGED BACK IN TODAY.
CLICK ON USER ID - ENTER PASSWORD - FLASH OF WHITE SCREEN - BACK TO USER IDS.
ANY IDEAS?
INTERNET SIGNAL STRONG. TIME CAPSULE PLUGGED IN,
THANK YOU!

Please do not type in all caps, it is considered shouting and we can hear you just fine.
The first thing to try is attempt to reset the SMC and PRAM. If you don't know how please click iMac SMC and PRAM reset

Premiere Elements 9 "white screen" issue

Hello All,
I recently bought a Canon HFR100 and am new to video editing, and decided to give the PRE9 Trial version a spin..
My issue is, after installing the trial, and messing around for a few days, all of a sudden I get a white screen for a preview, instead of the viewer with the watermark in my editor. if I double click a video file, ANY video file, no matter what video type I chose for my project file, I get this white screen. The audio is playing fine, but no video, just the white screen. (see image for the white area)
I've searched the forum for an answer, tried possible solutions (unistall - reinstall quicktime & Flash, added codecs, reinstalled the trial version. etc)...I just dont get it. Nothing else had changed, to my knowledge.
It's also a new home built machine: Intel i5, 4gb ram, Vista32, EGVA GTS450 Display card....no other problems...
Any help or thoughts would be greatly appreciated. I'm looking for good software to edit my son's hockey games, and I was looking at purchasing the full version, but I'm concerned it I do, I'll have the same problem (if it's a corrupt file, somewhere).
Thanks!

I am having the same issue -- white screen with all video files, can hear audio but can't see any video when previewing thumbnails or rendering previews or video --
I have a different configuration:
Dell Precision M6300
graphics card: NVIDIA Quadro FX3600M
OS: Windows XP
Intel Cor 2 Duo CPU
T9300 @ 2.5Ghz
2.47 Gh, 3.50 GB of RAM
I've updated the driver...
Quicktime...
Disabled my anti-virus...
I've been messing with this since I installed the trial a week ago but still have not been able to get Premiere Elements to work and try. Any suggestions?

TV screen goes blank or flashes a white screen

During playback of movies or TV shows, the TV screen will go blank or it will flash a white fuzzy screen and then the picture will come back. The audio continues uninterrupted. We have reset the unit several times, I bought a new HDMI cable just in case that was the issue and still have the problem.
Another item we have noticed (and it could be related) if you got to video settings, we have the resolution set to 1080p. But from time to time the setting reverts back to 720p.

..... Except, the Apple TV still won't change to the 1080p.
It's likely not as bad as you think, if your tv is 1080 then that's what you will be watching whether you have your tv set to upscale the picture to 1080 or whether the tv outputs at 720 and lets the tv upscale to 1080.
The worst scenario for you would be if the tv wasn't as good at upscaling as the tv. This largely depends on how good your tv is.
For example. We have a 50" LG tv in the front room, which is a little wacky since its display is actually something like 1366 x 768, so no matter what resolution we set the tv at the tv will always do some scaling. However it was noted that the tv is actually very good at scaling, indeed it's better than the tv (probably due to it costing c£ 3,000). So if we have a SD file, we get a better picture when the tv outputs at SD than when it outputs at 720, however we can't keep shifting resolutions to match our content so the tv is set at 720 (if it wasn't we would lose much of the quality when we play >SD content.
On the other hand our tv in the bedroom is a 46" Sharp Aquios and its upscaling is lousy. It's so poor that if we watch a SD tv broadcast (upscaled by tv to 1080) live and compare it to a recording of the same broadcast and played through the tv (output at 1080) the recording is noticeably better than the original broadcast.
I guess what I'm trying to say is that it all depends on your equipment.

Flash player white screen bug

Hi i recently update my n5233 firmware v.51 but i am unable to see video by flash player it comes white screen please help me

Hi Ramsoni,
Thank you for your post and welcome to the forums!
Reseting your device may help in this case. Just follow the instructions below.
Before reseting, remember to make a backup of your phone with Nokia Suite.
Dial *#7780# to soft reset your device, this will return the phone to factory settings without removing any personal data. If this does not solve the issue, hard reset your phone.
Dial *#7370# to hard reset your device. Hard reset will remove all settings and personal data off the phone, so remember to backup your data first.
When prompted for the security code, default code in both cases is 12345.
Let us know if this helps,
Puigchild
If you find this post helpful, a click upon the white star at bottom would always be appreciated.
If it also solves your problem, clicking ACCEPT AS SOLUTION below it will benefit other users!

Mac Mini Server Boot Camp Windows 8.1 White Screen Issue

Hello Apple Peeps!
I have a Mac Mini Server 2012 which I have had for around 6 months. I use it quite a lot mainly for Music Production on the OS X side and Graphic Design on the Windows side.
I recently decided to factory restore it as I wanted to spring clean it and reorganise the way some of my apps were installed. The way I had it set up was it was running OS X on one SSD and Windows 8.1 (installed using Boot Camp) on the other SSD. The way I went about the factory restore was I first used disk utility to erase/format the Windows SSD to Mac OS Extended (Journaled) and then went about the factory restore of OS X onto the other SSD as normal (following instructions from the Apple website).
The issue I am having now is that my newly installed Windows 8.1 (used solely on a single SSD) is hanging on a white screen for quite a long time before the Windows splash screen shows up, where before when I would boot or restart into Windows there was no white screen and it would go straight into the Windows splash screen and load to the desktop very quickly.
So my question is...
Why do I get this prolonged white screen before the Windows 8.1 splash screen appears? How can I get rid of it? It was certainly not present on my previous installation. Can anyone advise me what the computer is doing during this time so that I can do some further research into a solution.
What I have tried already....
1) PRAM & SMC reset.
2) Setting the startup disk to Boot Camp in both OS X and Windows 8.1.
3) Reinstalling Windows 8.1 through Boot Camp.
MAC MINI SERVER (LATE 2012), 2.6GHZ QUAD CORE I7, 16GB RAM, 2 x 256GB SSD, OS X 10.10.2, Windows 8.1 (Retail), Boot Camp Assistant (5.1.3), Covered By AppleCare.
I would really appreciate some help with this ;-)

I have right clicked on each SSD in Device Manager and selected the option 'Properties' from the drop down menu, which brings me to this window...
I'm not sure where I can find Device Attributes, I have clicked on each of the tabs in the window above, as far as I can see none of them mention AHCI enabled or anything similar. Thanks for all of your responses by the way...much appreciated!

Flash Builder 4 LDAP issue on IIS 7 with Coldfusion 8

I have a cfc that returns empty strings back into my project when I attempt an auto login through LDAP. The same files perform correctly on a different server with IIS 6. I set up a simple cfm on the IIS 7 server and received the appropriate data. I set up a cfm on the IIS 7 server to invoke the very same cfc that fails in the flash builder and received the appropriate data. Both servers are inside the company firewall.
The web folder is set up as an application with windows authentication enabled, disabling and enabling the anonymous authentication seems to have no impact on any of the scenarios. I am assuming I am missing some configuration in the ColdFusion Flex integration but I am not sure what it is. Anyone have a shot in the dark on this one?
Enable Flash Remoting support &
Enable Remote Adobe LiveCycle Data Management access are both checked
SSL connections are not being used.

I absolutly did read the guidance notes and it was based in them that we installed.
Quote:
"Now that we have had an opportunity to undertake further testing with the final release of Mac OS X 10.7, we are pleased to report that there are only minor usability issues when using Flash Builder 4.5.1 on Mac OS X 10.7 and, as such, we will be updating our previous statement to confirm compatibility of these releases"
What I am now experiencing on two different machines is what appears to be outside the scope of these notes and either a new issue that is reproducible, or a Java issue related to 10.7. Not being a Java guy I'm not sure were to begin short of trying Eclipse on its own.
I am able to produce a crash of FB 4.5.1 by just trying to close an MXML file by clicking the close button of the tab, or by closing a project. This is on two seperate machines now.

My Nokia SuperNova 7510 is flashing a white screen...

Yesterday, my phone ran out of battery so I plugged it onto the charger and left it that way overnight like I normally do. When I tried to turn it on in the morning, a white screen flashed on the screen and it kept going from a black screen to white about 5 times and then shut off again. It keeps doing this, I've tried taking out the battery and SIM card and waiting for a while and nothing has happened. I've also tried the deep reset thing where you hold down the 3, green key, and * and the flashing still happens when I press the key to turn it on. Please help.

if you have done reset etc and the problem remains you need to take it to a nokia care centre im afraid you can try updating the firmware 1st though if nothing changes nokia care centre is your last resort
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

White screen issue with DVC Pro HD

I have a G5, have Final Cut HD and have upgraded to QT 7 Pro. I am trying to open an HD file I shot last year, which was edited on another system. When I try to open the clip, it is a white screen with audio. The movie info is as follows.
DVCPRO HD (720p60), 1280 x 720, Millions
16-bit Integer (Big Endian), Stereo, 48.000 kHz
Any ideas on why it is not playing? Thanks!
John M

ok... i just got this on mine. yesterday i was just getting ready to log subclips from fcp5, and when i opened the project file, i noticed that all my subclips i created and orignal clip where all red / out. so i closed fcp5 and went to the location of the file. i double clicked it, and behold, white screen, audio only.. so i had to completely redo the convertion of the orginal file.
next day
I was looking for a subclip that i had already extracted from the main file, and when i double clicked it showed the video. after that closed the window, and someone asked me to reopen the quicktime file again, i double clicked it, and all of a sudden the video was white, and only audio.
ive spent about 4 to 5 hours researching with someone else on this issue and have yet to find anything such as a fix, or work around, but my video keeps disappearing which is disturbing. from what we have come down to the issue is deals within quicktime are below...
we believe that quicktime is somehow changing the codecs DVC PRO and changing it to "Integer (Big Endian), Timecode, Video.." that is what it says.. and comepletely removing the codec for the video, and deleting the video footage, but keeping the audio in place perfectly. now, we also used metadatahootenanny to inspect a copy of the file and low and behold severe corrupt of the meta data in the quicktime file. the issue be with quicktime interaction with storage, or a bug quicktime behalf. we need to find a solution to this issue. we are currently in contact with apple tech support and hopefully we will be posting a answer soon.

White screen after forced reload (used to fix previous white screen issue)

Last Friday after doing a battery pull to clear a stuck Facebook notification, upon reboot my Curve 8520's screen faded to white. I immediately did another battery pull, but then the same thing happened again. It did not return to normal until I plugged it into my wall charger.
I called my carrier, Rogers, about the issue and they sent me instructions to do a forced reload. I didn't have my USB cable until today, so I followed all the instructions for the forced reload this morning. After it went through and re-installed the software, I did a restore using the Desktop Manager. I'd been slowly working through re-installing all my applications when it froze up, so I did a battery pull. It did the "white screen of death" again after the reboot. Now it's just happening at random (ie. while waiting for a website to load), but still gets fixed temporarily if I plug it into the charger.
Is there anything else I can try to fix this? I can't exactly carry my wall charger around everywhere just in case this happens.
Another note: I'm nearly 2 years into my 3-year contract and am upset that this device isn't living up to the term. I can't afford a new phone and I don't want to get locked into another 3 years

So it's just happened again, this time without the battery pull. I was downloading the Toronto Maple Leafs app from mapleleafs.mobi, and it was nearly completed when the screen faded to white. This is very frustrating

Flash builder 4 productivity issue

Hi!
We are currently using flash builder 4.0.1 and I believe we are running into the source path issue :
http://bugs.adobe.com/jira/browse/FB-27301
We have around twenty developers using flash builder on a large project and this issue is slowing us considerably. We tried a few workarounds found on your forums but most of our tools need the path within the project to be defined as a source path. The library path option with source attachment is not really an option with our current setup.
Is there any way to download a flash builder nightly build or get the fix within a patch? (I can see that it was fixed in august and it is part of one of your milestone)
We have someone in my company in contact with a rep but I don't think the adobe rep can answer that specific request.
Thanks!

After further investigation, we found out that we were defining a few of our namespace by referencing directly the packages of our custom component instead of creating a clean namespace as recommended by the flex documentation. Using the package definition works just fine when it is local but our component were located in a swc library.
We were doing this :
xmlns:foo="com.mCompany.controls.foo*"
instead of generating an xml manifest and basing our namespace on it
xmlns:foo="http://com.myCompany.controls/foo"
We think that flash builder was slowing down because each and every time we were loading up an mxml it had to rescan the said package.

Flash builder white screen issue

Similar Messages

Maybe you are looking for