Flash builder4 and zend studio 7.1.2

Hi I need help, I just installed flash builder 4, I currently have zend studio 7.1.2
I want to know how to enable the flex thing in my zend studio.
can somebody please tell me how to do it ?,
is flash builder installation enough to enable the flex thing in zend studio 7.1.2 ?
(am planning to use this for air development, please help thanks )

You don't have to buy a separate plug-in license. When you buy Flash Builder, you can use your license for standalone, plug-in or both.
When you use the plug-in installer, one of the first prompts is to install into a bundled Eclipse distribution or an existing one. Choose the eclipse root for your Zend Studio installation.
Also, can you provide more information about the crash? Mac/Win, java version, crash details, etc.
Jason San Jose
Software Engineer, Flash Builder

Similar Messages

Zend Studio for Eclipse and Flex - Impossible?

I've been going in circles all day trying to get the Flex
plug-in to work in the Eclipse installation that installs with Zend
Studio for Eclipse.
The offshore dork for Zend said, "No now for plug-in for
Studio." So I guess that means I have to install Eclipse with Zend
Studio for Eclipse and then the Flex plug-in. But it appears the
Flex plug-in is baffled by the Eclipse 3.4 version that installs
with Zend Studio for Eclipse.
Many errors about please choose the correct folder etc. The
installation of the Flex 3.0 plug-in can be completed but fails
when trying to edit an mxml file with, "Could not open the editor:
Assertion failed."
There is a Flex updater to 3.0.1 which claims to support
Eclipse 3.4 but not for the plug-in as far as I could tell.
Attempting to use the Flex 3.0.1 updater on the Flex 3.0
plug-in installation in the Zend Studio for Eclipse directory
completely befuddles the installer.
Can anyone point me in some new directions for a solution?
Does Adobe have phone support any longer?
cd /

this is the same problem disscused in thread (Flash Builder 4 plugin with eclipse 3.6) http://forums.adobe.com/thread/747394?tstart=0.please follow that thread if any one do not understand this thread problem.

Zend studio 8.0 and flex 4 plugin integration problem(please help!)

hello every body, actually i have installed Zend Studio 8.0 is built on Helios( which is currently the latest one) and trying to integrate flash builder 4(flex 4) plugin, but when i point to (C:\Program Files\Zend\Zend Studio - 8.0.0) folder the flex installer warns me since there is no folder named "dropins" in Zend Studio - 8.0.0 directory . even if i ignore the warning from flex plugin installation and continue to finish and at the end when i start zend studio no flex plugin is detected.please can any one help me in this regard. i will grately appreciate a help from the adobe team and community.

this is the same problem disscused in thread (Flash Builder 4 plugin with eclipse 3.6) http://forums.adobe.com/thread/747394?tstart=0.please follow that thread if any one do not understand this thread problem.

Flash Builder 4 Plugin in Zend Studio 7

Having problems getting Flash Builder 4 Plugin to work with Zend Studio 7, keep getting this error message when I try to run it even a simple hello world project.
Any idea's what's going wrong?
Regards
Chris

If you look in the paths given in the error message for the adl.exe and the \runtimes\air\win\ tree, are the expected files installed in those paths?
-Chris

Zend Studio and Dreamweaver - together?

This is probably a good question for David Powers.
Will Zend Studio mix well with DW in a development environment (say the way BBEdit, etc. does)?
I'm hoping to enhance the PHP side of things, learn a bit about the Zend Framework but continue with DW as my primary tool. In other words utilize a number of these tools on the same project. At the least I would think the Zend editor would be helpful for even simple bits of PHP code edits?
Thanks for any feedback.

I use Zend Studio in conjunction with Dreamweaver quite well. Zend Studio is brilliant for intellisense code hints for PHP variables. It's also got wonderful code hinting, not only for built-in functions, but also for custom-built ones too. It also shines with code hints for custom and built-in PHP classes. On the other hand, it's rotten for HTML, CSS, and JavaScript. Moreover, it doesn't have the Design view or Live View features of DW.
When doing heavy PHP coding, it's Zend Studio for me all the way. For HTML and CSS, not forgetting Dreamweaver's PHP server behaviors, Dreamweaver wins hands down.
Now, if either ZS or DW could do both...

Flash Builder4.6:Both 32-bit and 64-bit versions will be available.

Flash Builder4.6：Both 32-bit and 64-bit versions will be available.

Hi jeri-de,
If you are using a 64 bit computer you can install just the 64 bit program else install only the 32 bit version.

I currently have a flash builder4.6 premium of the product license. and I want to upgrade 4.7 premium for free. how can I download this product?

I currently have a flash builder4.6 premium of the product license. and I want to upgrade 4.7 premium for free. how can I download this product?

Hi jeonghs
Customers who have a valid Upgrade Plan or who own Platinum Maintenance will receive an FOC product.
Refer :http://www.adobe.com/products/flash-builder/faq.html
For complimentary Upgrade, Please refer : Adobe® Flash® Builder® 4.7 Complimentary Upgrade

Flash builder4.7 Crossbridge_1.0.1 flex_sdk_4.6 unable to combine pthread and as file together.

flash builder4.7 Crossbridge_1.0.1 flex_sdk_4.6
i made a swc according the sample of 09_Pthreads of the Crossbridge_1.0.1. the swf could generate and it could not run.
the sample under 09_Pthreads directory also could not run. it is make swctest flag. it could generate pthread_swc1.swf and pthread_swc2.swf two files.
pthread_swc1.swf works fine. but pthread_swc2.swf could not run.

problem sovled. it is crossbrige's bug.
Problem using sample pthread.swc in a Flex project

Trouble installing FlexBuilder plugin on Zend Studio 7.0 Beta

I am trying to install the FlexBuilder 3.0.2 plugin on Zend Studio 7.0 Beta according to instructions found here (Adobe/article by Richard Bates)
The interface in Zend Studio has changed slightly, so from Help > Install New Software ... I set "Work with:" to the path of the FlexBuilder plugin at "D:\Program Files\Adobe\Flex Builder 3 Plug-in\eclipse - file:/D:/Program Files/Adobe/Flex Builder 3 Plug-in/eclipse/", select both Adobe Flex Builder Core Feature (3.0.214193) and Adobe Flex Builder Localized Core Feature (same version), click Next and get the following error:
"Cannot complete the install because one or more required items could not be found.
Software being installed: Adobe Flex Builder Core Feature 3.0.214193 (com.adobe.flexbuilder.feature.core.feature.group 3.0.214193)
Missing requirement: Mssql Plug-in 3.0.214193 (com.adobe.datatools.derived 3.0.214193) requires 'bundle com.ibm.icu [3.4.0,4.0.0)' but it could not be found
Cannot satisfy dependency:
From: Adobe Flex Builder Core Feature 3.0.214193 (com.adobe.flexbuilder.feature.core.feature.group 3.0.214193)
To: com.adobe.datatools.derived [3.0.214193]"
Any help would be appreciated.

Flex Builder 3 plugin is not intended to be installed on Eclipse Galileo (3.5).
Zend Studio 7 is based on Eclipse 3.5, and when I tried to install the FB3 plugin, the installation wizard gave me this error:
"Please choose an existing Eclipse 3.2, 3.3, or 3.4 folder to be extended with the Flex Builder Plugin-ins."
However Flash Builder 4 it seems that it's working with Eclipse 3.5. I've just installed Flash Builder 4 plug-in into Zend Studio 7.
Here is a post about this: http://margelatu.org/

Can't open Zend Project files using Zend Studio

Hi there,
I've been in contact with Zend about this issue but they assure me that they don't have this problem with their Mac's and no other Mac user has reported this fault.
So here I am asking in the only other logical place I can think of.
Basically I want to double click on a Zend Project File (.zpf) and have it open in Zend Studio.
The first time I tried setting the desired application to ZDE.app it came up with an unknown error I think it was -10814? And each subsequent time I try to open the project file I get Zend Studio telling me it is an unrecognized file type.
If you could give me any suggestions or leads to follow I would greatly appreciate it.
Thank you for your time,
Ant

HI webchalk and Welcome to Apple Discussions ...
Ok, when you say you tried setting the desired application to ZDE.app ... have you tried this?
To open a document with a specific application:
In the Finder, select the document and choose File > Get Info.
In the Info window, click to show the "Open with" pane.
Choose the application you want to use from the pop-up menu.
If you want all documents that have the same file type as this one to open with the same application, click Change All.
Carolyn

Lenovo Yoga with Windows 8 Pro, Office 2013 and Visual Studio

For you developer types, I just wanted to post a message and let you know my experience with Lenovo Ideapad Yoga 13 as a development machine. I bought Lenovo Ideapad Yoga 13 from Bestbuy for $999.99. As expected, it came with a crap ton of bloatware installed by Lenovo.
Here is a summary of what I did to it (I take no responsilibity for accuracy of below information. You are on your own if you decide to follow them. I am just putting this down from my memory so that I can look it up in the future if I ever need to do this again).
INITIAL CLEANUP
Installed Lenovo hotfix for partition cleanup/merging: http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS033035
Installed Lenovo Touchpad driver fix.
CAUTION: I take no responsibility for below steps. I am writing them from memory and if you decide to follow them and end up making your machine unusable, you are on your own as Lenovo might not honor your warranty.
BACK UP ENTIRE DISK (requires an empty USB flash drive for booting and another external USB drive for backup)
Copied Drivers from D_Backup folder to the external USB hard drive (plugged into USB 3.0 port).
Installed Paragon Backup & Recovery 2012 Free: http://www.paragon-software.com/home/br-free/
Created Paragon Backup & Recovery boot USB flash drive with default Linux recovery environment option (flash drive plugged into USB 2.0 port).
Shutdown Lenovo Yoga.
Plugged in the Paragon Backup & Recovery boot USB flash drive (USB 2.0 port).
Pressed the one key recovery button (next to power button). Went to BIOS.
In the BIOS, enabled Legacay mode and made Legacy high priority and saved the changes.
The machine booted into Paragon Backup & Recovery mode. From there, made a backup of entire disk to the external USB hard drive.
Shut down the machine, pressed the one key recovery button (next to power button). Went to BIOS. Turned off Legacy mode and switched back to UEFI boot mode and saved the changes and restarted the machine.
Logged into the machine and verified that everything was good and checked the external USB drive to verify that the backup image was present.
MAKE WINDOWS 8 PRO BOOT USB FLASH DRIVE (requires a second empty USB flash drive and a second computer with Windows 7. This USB Flash Drive has to be between 4GB to 32GB as Windows won't format 64GB flash drives to FAT32 mode)
(Note: I installed Windows 8 Pro in UEFI mode. See http://pcsupport.about.com/od/windows-8/a/install-windows-8-usb.htm)
You need a licensed ISO image of Windows 8 Professional Full version (not the upgrade version) from your MSDN or Technet subscription or create an ISO from the Windows 8 Pro full version DVD.
Download Windows 7 USB/DVD Download Tool on the computer with windows 7.
Plug in the second empty USB flash drive (has to be at least 4GB but less than 32GB) into the computer with Windows 7.
Using Windows 7 USB/DVD Download Tool and the ISO file, create the Windows 8 Pro bootable USB Flash drive.
Create a new folder on your computer disk, for example, C:\WIN8USB.
Copy all the files from your USB flash drive to the newly created folder (created in the previous step).
Right click on the USB drive icon in Computer window and select “Format…” from the context menu. Make sure you select “FAT32 (Default)” in “File system” drop down menu. Click “Start” and wait till the drive gets formatted. This step is needed because NTFS is not readable by BIOS in UEFI boot mode. During formatting, MBR is preserved so the thumbdrive is still bootable.
Copy all the files from the folder you created earlier (C:\WIN8USB, for example) to the formatted drive. Your Windows 8 installation USB drive is ready to install in UEFI mode.
WIPE THE DISK PARTITIONS
Shut down the machine, pressed the one key recovery button (next to power button). Went to BIOS, enabled Legacay mode and made Legacy high priority and saved the changes.
Booted into Paragon Backup & Recovery boot USB flash drive again. This time, I deleted all partitions on the primary disk (Disk 0). CAUTION: This WILL wipe your hard disk and will make your machine unusable!!!
Shut down the machine, pressed the one key recovery button (next to power button). Went to BIOS. Turned off Legacy mode and switched back to UEFI boot mode and saved the changes and shut down the machine.
At this point, the disk is wiped clean. All factory installed software and recovery partitions are gone!!!
INSTALL WINDOWS 8 PRO
Plug in the USB Flash Drive with Windows 8 Pro install files.
Windows 8 Installer would show the unallocated disk space. I can't remember the exact details but either I had to click on Delete or New to delete and then create a new GPT partition. The entire partition was about 119GB.
From that point, follow the Windows 8 Pro installation steps.
After booting up into Windows 8 Pro, plug the external USB drive that had the drivers folder backed up from D_backups.
Install all the drivers from this folder (I was able to install everything except for one Intel fast boot one because of missing partition but my Yoga still boots up just as fast).
Go to device manager to check and everything should be good now.
Run Windows Update.
You should now have about 101GB free on C: drive!!
INSTALL VISUAL STUDIO, SQL SERVER and OFFICE 2013 ON LENOVO YOGA 13
I installed the following in that order:
Microsoft SQL Server 2008 R2 Developer edition (I installed all components, everything!). Then I installed latest service pack.
Microsoft Visual Studio 2010 (I installed all components, everything!). Then I installed latest service pack.
Microsoft SQL Server 2012 Developer edition(I installed all components, everything!). Then I installed latest service pack.
Microsoft Visual Studio 2012(I installed all components, everything!)
I ran Windows update and also installed Nov 2012 updates of SQL Server Data tools.
I then installed Office 2013 Pro Plus.
MAKE LENOVO YOGA 13 MORE SECURE
Go to Control Panel and enable Windows Defender (it is included by default in Windows 8 and is anti-virus and anti-malware solution)
Enable full hard-disk encryption using BitLocker feature of Windows 8 Pro. Since Lenovo Ideapad Yoga 13 doesn't have hardware TPM, you have to enable password based option. For this, follow the steps here: http://rics.partners.org/show_article.php?id=274.
Basically, you go to GPEDIT.MSC and Open Computer Configuration => Administrative Templates => Windows Components => BitLocker Drive Encryption => Operating System Drives. From the right pane double-click "Require additional authentication at startup. Select Enabled radio button and check the box for "Allow BitLocker without a compatible TPM...". Click OK and close the policy editor. Then Right-click your C drive in the Computer folder, click Turn on BitLocker. Then select Enter a password instead of USB option. Then provide a strong password (make sure to write it down and put it in a SAFE place, if you lose the password, no one can boot into your hard disk). Then select Save to a file and save it to the External Drive. Select "Encrypt entire drive...", click Next. When this is done, you will get a pop-up on the lower-right a prompt to restart the computer. Restart your PC. Enter the encryption password created earlier. If you are successful in getting into Windows, you're all set.
I also hooked up to Skydrive and used BoxCryptor to encrypt my files in cloud.
The available free disk space should now be about 54GB.
I verified that Lenovo Yoga 13 works like a champ with no slowdown with Visual Studio 2010, Visual Studio 2012 and SQL Server Management Studio open simultaneously and Bitlocker enabled!
The keyboard right SHIFT key is small but other than that, it can work as a great portable development machine and Microsoft Reader is great for reading PDF eBooks.
So if you are a Developer on Microsoft platform, go right ahead. Lenovo IdeaPad Yoga 13 is great for running Visual Studio 2010 and Visual Studio 2012 (1600x900 resolution is totally usable) while on the move. Since I have only had this machine for a few days, I can't tell much about the long term reliability.
Solved!
Go to Solution.

Thank you for posting this. I am in this exact situation. I purchased a yoga 13, and installed Visual Studio Express 2012 for Windows Phone. As it turns out, the Windows Phone Emulator ONLY works in a Windows 8 Pro environment. Since the Yoga doesn't have a disc drive, I shared my W7 computer's cd drive, then put in Windows 8 Pro, so that it could install onto the Yoga. Well, after the installation was done, I tried running my program again and ran into the same issue. It prompted me that my environment must be Windows 8 Pro! I thought that Windows 8 Pro already installed but, what confuses me is that I see no indication that Windows 8 Pro installed. When I go to the System Window, it reads: "Windows 8". Should it read Windows 8 Pro?
Ultimately, I'd like to know, are you able to execute the Windows Phone Emulator? I'm not sure as to whether the Yoga has the hardware capability (needs to be SLAT enabled or something like that?), I HOPE it is able to, and judging by your post, it seems like it but I'd love to know your perspective on my approach.
Please let me know if this makes sense, as I'm new to this kind of thing but really want to start development for Windows Phone.

Zend Studio Installer

[tim@pinkbox Downloads]$ ./ZendStudio-5_2_0.bin
Preparing to install...
Extracting the JRE from the installer archive...
Unpacking the JRE...
Extracting the installation resources from the installer archive...
Configuring the installer for this system's environment...
awk: error while loading shared libraries: libdl.so.2: cannot open shared object file: No such file or directory
dirname: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/bin/ls: error while loading shared libraries: librt.so.1: cannot open shared object file: No such file or directory
basename: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
dirname: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
basename: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
hostname: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
Launching installer...
grep: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/tmp/install.dir.617/Linux/resource/jre/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
[tim@pinkbox Downloads]$
I need this stuff to work. :?

Oh wait, sorry, I got to far ahead of you, my solution above is if you already have Zend Studio Client installed, sorry.
But the problem is still the same, Zend's scripts are trying to set LD_ASSUME_KERNEL, which will give you these errors.
Maybe you can find some way to extract the files in the .bin setup file, modify the scripts and package them back into the .bin or contact support and tell them whats happening.

Zendcore compatible with Zend Studio 5 beta 2.0, do you install Core first?

Do you install Core first and afterwards Zend studio 5 beta 2.0? Or does Studio overwrite the Core installation? Thinking of using the Zend platform in regards to developing an online application.
TIA
Peter

Zend Core runs on the server, Zend Studio runs on the client machine you're using to develop the site. They are two separate products, and do not conflict with each other. You can install them in any order. I would take a look at the documentation for each to get a better understanding of what they are and what they do.

How to update zend studio plugin?

hi
zend studio has been recently updated getting some serious bug corrected.
how to update zend studio inside flash builder for php?
cheers
holo

Hi Holo,
FBPHP 4.5.0 includes all updates presented in Zend Studio 8.0.1.
Do you see any issue that was not integrated please post it here.
Thanks!
Roy

Flash text and flash buttons in DW CS4

Hi,
I have installed DW CS4 on my pc with Vista Home Premium 64
Bit...I have edit my website homepage and I have discovered that I
can't edit all flash text and buttons that I have created with DW
CS3! I have see that the adobe has removed from CS4 version this
option! So, now how I can resolve this problem??
I have try to install also the CS3 version but I don't
understand because I can't no more activated it from internet or
phone option!
I'm very angry for this, now I have to recreate from the
begin all flash text and buttons of my website with other software?
perhaps to buy also the Flash CS4 version for the solution? is this
the new idea of adobe with their new CS4 version?

> I'm very angry for this, now I have to recreate from the
begin all flash
> text
> and buttons of my website with other software? perhaps
to buy also the
> Flash
> CS4 version for the solution? is this the new idea of
adobe with their new
> CS4
> version?
It was a poor choice on Adobe's part to ever include such an
option, and on
your part for using it. Think about it -
1. Some people don't have Flash installed - what do they do?
Especially
consider those people who are browsing from a corporate
internet where Flash
is not allowed by the IT staff.
2. Search engines may not parse Flash links - your site will
not be
spidered unless you have redundant HTML links
3. Screen assistive devices don't parse Flash links - what
will those users
do?
4. DW cannot maintain links within a Flash movie, so if you
move or rename
a linked file, your navigation will break - what will you do?
You will have
to remake those buttons.
It's almost always a very bad idea for these reasons.
The solution is to make graphics to replace the Flash
elements, or just use
CSS styled text.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"s76x" <[email protected]> wrote in message
news:[email protected]...
> Hi,
> I have installed DW CS4 on my pc with Vista Home Premium
64 Bit...I have
> edit
> my website homepage and I have discovered that I can't
edit all flash text
> and
> buttons that I have created with DW CS3! I have see that
the adobe has
> removed
> from CS4 version this option! So, now how I can resolve
this problem??
> I have try to install also the CS3 version but I don't
understand because
> I
> can't no more activated it from internet or phone
option!
>
> I'm very angry for this, now I have to recreate from the
begin all flash
> text
> and buttons of my website with other software? perhaps
to buy also the
> Flash
> CS4 version for the solution? is this the new idea of
adobe with their new
> CS4
> version?
>

Flash builder4 and zend studio 7.1.2

Similar Messages

Maybe you are looking for