Flash buttons and music
Hello Flashers-
I bought a flash button template to play an audio file on a
website I'm working on. Now that I have bought the button, how do I
get it to play the audio file I want?
Here is the button set I bought:
Flash button
template
I appreciate any help I can get. Thanks.
the audio file is an mp3 file. i am trying to put a flash
'play' button on our html site for a 30 second preview for a song.
if i can just embed the audio in a swf, then that would be awesome,
but i'm not sure how to do that. i'm also not familiar with loading
it externally, so either way i'm ill-equipped to make this work. i
assume if it is an external file then it needs to be loaded.
i appreciate any info you can share.
Similar Messages
-
I was listening to iPod nano in docking station and pressed center button and music stopped playing and a high pitched sound is emitting from iPod.
Hi gscoops,
Welcome to Apple Support Communities.
You may find the steps in our iPod Troubleshooting Assistant helpful:
http://www.apple.com/support/ipod/five_rs/classic/
Best,
Jeremy -
Flash buttons and slideshow don't show [was: Please help]
hello all and thanks in advance
ive made my site using dw cs3 and all works perfectly on my hdd when i preveiw in i.e or firefox ,however when i upload the site to my server (justhost)
the flash buttons and slideshow do not apear ! dont know what i can do to reslove this so any ideas would be great and thanks again for reading
regards martin
[Subject line edited by moderator to indicate what the question is about]hi again and thanks so much
the file was there but the script folder it was located in was using a capital letter to start ...doh
again thank you so much
regards martin -
Hello all,
I've been having a bit of a hard time understanding how to get a button which I have created in Flash to navigate to the next slide of the PowerPoint presentation which it has been added into. I'm fairly new to Flash, so I believe that this is slightly out of my natural skill range, so hopefully someone will be able to help.
I understand that I somehow need to make use of fscommand in ActionScript, but I'm not sure how I can get Flash and PowerPoint to communicate between themselves. If anyone could write a walkthrough on how to do this, I would be bery grateful.
I'm using Flash MX 2004 7.0 and Powerpoint 2003.
ThanksHi. Why not to make the whole presentation in FLASH? What you have to do is to import all the slides inside FLASH. Then place one by one in the stills and then create the code to make the stills advance and show the slides by means of the button. The code for the button goes as follows:
on (release) {
nextFrame();
to introduce this code make sure you press the button and no the frame.
Then in order to make the presentation open and cover the screen, no matter how big it is, you need to enter the following code in the first frame:
stop();
fscommand ("showmenu",false);
fscommand ("fullscreen", true);
You will need also a button to quit the aplication. This is the code:
on (release) {
stop();
fscommand ("quit");
Now write all of this in your application and let me know your experience. MamenFLASH$ -
Gray frame around flash buttons and more...
Hi,
1.I've used flash buttons in my home page,the problem is
that when u view the page with explorer u see a gray frame around
the buttons...
It is so ugly...some one knows how to fix it without using
the code?
2. Another problem, the behevior "show pop up menu" is not
valid,
i've used it before on that page....
i tried everything... i saved it ,linked it...
i dont know what is the problem...
thank you....if you can help
RacheliI'm experiencing the same problems with my flash buttons. As
you hover over them initially, a gray border surrounds them and an
alt tag pops up that says "click here to activate this control."
This confuses some of the visitors, becuase they perceive this as
if the buttons do not work. I suspect it may be a browser specific
problem...are there any quick fixes for this? Thanks for the help.
--Daniel Serna
Knight Aerospace Products, Inc. -
Flash buttons and History.back
Hi all
I am using a flash button created in DW studio 8.
But want to use the javascript:history.back() for the link.
I put in the link textfield javascript:history.back()
But that don't work how can i fix that please?
Thanks for all that can help me
HugoI wouldn't recommend the use of Flash buttons period.
They cannot be spidered.
They do not appear when the visitor doesn't have Flash
plugin.
They are not usable by screen assistive devices.
They have link and path problems after they have been
inserted on your page.
Your best bet is to forget they exist and use an ordinary
text or graphic
link.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"wwcbe" <[email protected]> wrote in message
news:ef2uo7$732$[email protected]..
> Hi all
> I am using a flash button created in DW studio 8.
> But want to use the javascript:history.back() for the
link.
> I put in the link textfield javascript:history.back()
> But that don't work how can i fix that please?
>
> Thanks for all that can help me
>
> Hugo
> -
When I first built www.tutsheaven.com, I used Dreamweaver and
Flash buttons. Everything has worked fine until IE7 came out. Now,
you need to double click on the buttons to navigate to the next
page. Is there a fix for this problem, or do I need to change all
of the buttons on this and some other sites?
Bob Tuttle
707-322-4959
[email protected]update dreamweaver 8 to 8.02, or get dreamweaver cs3.
-
Using a Flash button and rollover captions simultaneously
Hi,
I have a button that I created in Flash. When hovered over, the button turns a different color. I'd like to use this button simultaneously with the rollover caption feature in Captivate, but it looks like I can only get one or the other to work, depending which is stacked on top.
Anyone have any workaround ideas, besides creating each button individually in Flash and adding the text in the hover state?
I'm using CP6.
Thanks!Hi there
Why use Flash just to create a button rollover? Captivate offers Image buttons where you specify up to three images used for rollovers. And with the Captivate button you could enable the Hint caption to provide the rollover you are seeking.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks -
Flash Buttons and UI Components need double click to work. Any Solution?
Hi,
I have just finished making an application for Kiosk in Flash. However while testing I noticed that the buttons I used and UI components like textfield, textarea, radiobuttons, etc need to be touched twice to make them function. Can anyone tell why this happens and how to solve this issue? Its very frustrating for a user to keep clicking on the component to make it active first and then make it work.
Note: Is it like Flash UI components need time to get active on screen and then they function?
Thanks in advance.Thanks for the reply ReshapeMedia.
What I want to say is I have a Flash exe file which contains feedback form for customers. This exe is displayed on Kiosk where user can interact with it using touch screen. The problem here is - when user touches (clicks) on the input field on screen or selects a radio button, it takes him several attempts to do so. In other words, user keeps on touching and tapping to activate the input field first and then somehow it gets activated and after multiple touches it allows them to enter the data/ radio button is selected and other buttons functions.
This obviously adds to users frustration.
This application is not loaded in IE so there is no browseer involved here.
You mentioned a script trigger a mouse click. What is that? (I have addEventListener on my buttons already) Kindly explain a bit. Thanks a lot. -
Flash Buttons and a nested movie clip
I have made my movie clip and now I want to nest it into a
button. I am not sure what code I need to use for this and how to
nest it. I want, when a person rolls over the button for the movie
clip to run. When they roll off of the button the movie clip stops.
When they click on the button it takes them to a link. If anyone
can please help me with this, I would SO greatly apprecaite it.
Thank You ahead of time.Thank You SOOOO Much for replying to this. I can't tell you
how much I appreciate your help.
I just assumed that was the only way I could do it, (nest
it.) So, my MC is called jiggle.
So everywhere you have the my_mc. Should I replace it with
jiggle.onRollOver etc....?
ALso you say to attach the code to the action layer in the
frame the MC appears, not in the MC itself.
So, in the timeline that I have my MC , I have an actions
layer. Do I not want an actions layer there? Should I just save the
timeline with my MC and then cut and paste it into another timeline
that has the actions layer?
I actually have 5 of these MC.that all need to do the same
thing, they are each for a different button. -
Flash buttons and combo box's. Help
Ok! Picture the scene. I have a combo box on the left hand
side of the stage that holds difrent options of color's. And on the
right side of the stage I have ten buttons showing the color's! So
what I want to happen is! A person come's to this page and I want
them to be able to eather select the option with the combo box drop
down or be able to click on one of the color button's on the right
hand side of the stage and it select that color in the combo box. I
need this to happen because I will have lot's of option's
(size,stlye,color,wood color ect..) for the person to look at and
the combo box part will be way down at the bottom of the page.
If any one can help that would be great! Or if you know of
tutriols out there you can point me in that direction! Thank you
all for reading!In which trigger you try to do this? Have you tried with when_new_block_instance?
Here it works!
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Tamer ([email protected]):
Hello All
I want to populate drop down list dynamically with this procedure. but when i use combo box every thing
working fine. but i change to poplist (that what i want) at first time when populate the poplist working
but when i try to repopulate the poplist i get this error message.
'FRM-41337 Cannot populate the list from record group'
i need to use poplist and repopulated it. how can i fix the problem.
thankx
PROCEDURE populate_lst IS
p_input_query VARCHAR2(500):='SELECT ALL'
| |' SMS_BOM_SECTION.SECTION_ID,'
| |' SMS_BOM_SECTION.SECTION_ID Value'
| |' FROM SMSDEV1.SMS_BOM_SECTION'
| |' ORDER BY SMS_BOM_SECTION.SECTION_ID ASC';
p_list_name VARCHAR2(50):='SMS_BOM_CENTRE.SECTION_ID';
v_rg_id RECORDGROUP;
v_list_id ITEM;
v_rg_name VARCHAR2(20) := 'reg';
v_retval NUMBER := 0;
BEGIN
--Find the list itself
v_list_id := find_item(p_list_name);
IF id_null(v_list_id)THEN
bell;
message('List item '| |p_list_name| |' did not exist');
raise form_trigger_failure;
END IF;
--Find the record group itself
v_rg_id := find_group(v_rg_name);
--Delete the record group if it already exist.
IF NOT id_null(v_rg_id)THEN
delete_group(v_rg_id);
END IF;
--create the record group from query
v_rg_id := create_group_from_query(v_rg_name,p_input_query);
IF id_null(v_rg_id)THEN
bell;
message('Record group could not be created');
raise form_trigger_failure;
END IF;
--Populate record group
v_retval := populate_group(v_rg_id);
--Populate the list if all is well
IF v_retval = 0 THEN
--Populate list
populate_list(v_list_id,v_rg_id);
--Delete record group
delete_group(v_rg_id);
ELSE
--No able to populate record_group
bell;
message('can not populate the record group ');
raise form_trigger_failure;
END IF;
END;<HR></BLOCKQUOTE>
null -
Hi...I am looking to an xml file to generate a simple text
link in my movie
that will load flv's. I don't want to load the links into a
component. I
just need simple link text buttons that change color on
rollover and act
like normal link buttons. Right now it loads into a list box
and I don't
like the default rollover stuff that can't be changed with
setstlye. Most
notable the box that appears and highlights around the
rollover choice. Can
anyone direct me in the right area toward a tut or something?
Not much help
on searches.
Thanksif you already have a fla that loads an xml file and assigns
links, you don't need to start over. just find the code that parses
the xml file. use some trace() functions to see what's being loaded
and assign mouse handlers to your buttons instead of to your list
component. -
The Flash Text and Flash Button options have dissappeared
the Flash Text and Flash Button options have dissappeared in the insert menu in Dreamweaver CS4. They used to be there but not now
Adobe announced the features they were removing from CS4 a year or so before CS4 launched:
The ill-conceived Flash buttons and Flash text were among the deprecated features.
http://help.adobe.com/en_US/Dreamweaver/10.0_Using/WS2C41F19D-502B-4fb5-8A54-4442E2127C84a .html
Deprecated features
The following features have been deprecated for Dreamweaver CS4:
Timelines
Web services
Layout mode
Site Map view
Java Bean support
Adobe® Flash elements (Image Viewer)
Adobe® Flash text and Adobe® Flash buttons
ASP.NET and JSP server behaviors and recordsets -
Flash button to turn off sound
Can anyone help please! I want to add sound to a webpage but
offer the user a chance to turn it off. I thought I could create a
Flash button and asign a behaviour to turn the sound on and off but
can't make it work..Any advice very welcome - thanks ....
HeatherSure this can be done and is known as a 'toggle' button. What
you need to do is make a MC with two 'states', 'off' and 'on' with
labels just like that. then you will control the MC button from the
on handlers, and use a boolean variable to determine which 'state'
the button is in, and then execute the opposite state.
A Sound Object is a sound class instance that you can use to
control the playback of a sound from that is attached from the
Library or load a streaming sound from your sever (in this code I
chose the latter as an example), rather than placing the sound on
the timeline, saving file space and download time (I'm assuming
this may be BG music). Using a Sound object also gives you more
control over the sound.
So with you MC set up, a sound in the same directory as the
fla/swf files, then add this kind of code to the main timeline
where the button (MC) resides, I'll call the button instance
'mute_btn': -
Flash buttons won't work in Dreamweaver
Hello,
I recently watched/read tutorials about how to add Flash buttons into Dreamweaver. I followed the instructions perfectly: insert>media>flash button, and played around with that options. After I clicked ok/apply, though, the only thing that popped uo was a little grey box with the "f" Flash logo inside. It could be resized, but thats it. When I tried previewing it in a browser, all I saw was a little box in the color i had set as the BG color. In the properties window, it says "undefined" next to file. I am using CS3on a macbook, and am a beginner with Dreamweaver. Anybody know why this is happening and how i can fix it?
-New userThat's correct. There's no difference. But Flash buttons should be avoided however you make them.
Use text-based CSS formatted buttons instead.
Easier to maintain and update and search engines love them.
Google CSS Buttons and you'll find plenty of tutorials.
Maybe you are looking for
-
Sales order creation with bapi in webdynpro
When i use table control to update the line items only first row is getting updated in the sale order creation and the loop is not updating the other row to header only the first row is getting saved, for the same set of data sale order is getting c
-
Macbook Air will not find network wireless printer, ipad PC print ok
Deskjet 3055a printer on wireless connection to Virgin Superhub. ipad and a PC print ok. I cannot add MacBook Air (in same room) to the Network. Please help.
-
Reporting Agent - Alert Views & Alert Details repeating twice
Hi All, I have configured reporting agent settings for a BW Query. The exceptions will be communicated through email. The email has been configured to output Alert Views & Alert Details. However when we recieve the email, the alert views, details as
-
Recently, when I start up, a quarter-size image of the command pretzel has appeared in the middle of the desktop - it fades in quickly, remains only a second, and fades away. I'm beginning to think of it as a ghost. Does this convey a ghastly warning
-
CS6 & CC versions - file window will not close
Out of nowhere, PS will not close any file windows I have open. In CS6 or CC. Been fine until today. Not with the pull down menu, or command-W, or by clicking the top left x of the file (or if not saved yet, the red ball). Same for any filetype; jpeg