Flash buttons problems when screen text set to medium in Windows 7

Anyone else have this problem that when
users have set windows 7 to Medium 125% screen size (not screen resolution), the clickable area on all buttons
in a flash menu/file are off. It's like the area to click for the button is not resized with the graphics and are no longer located over the button but stays where it is when screen size is set to 100%. With a more complicated menu, it makes it nearly impossible to click buttons at the bottom of the menu as the clickable area is located twoor more buttons up. It also seems to be happening with newer Flash files. On older versions it's not happening and the clickable area is scaled with the graphics in the Flash file. Please help!

See this:
[http://support.mozilla.com/en-US/kb/Changing+the+e-mail+program+used+by+Firefox]

Similar Messages

  • Flash button problem when scrolling

    Hello.
    I posted this in Dreamweaver forum as well....just in case.
    I am using flash buttons for email links in my web site
    rather than html email links to help with spamming.
    They work great except for one thing. In my site I have a
    fixed Div on the left of my pages. The content scrolls sideways
    underneath the fixed div. However....the flash buttons scroll over
    the TOP of the fixed div while the rest of the content goes under
    as it is supposed to. I have the fixed div set at z-index of 2.
    This isn't an issue in Firefox, only IE7, so far.
    Any one know of an easy fix for this rather than creating a
    new div for each of the buttons?
    Here is the link to the problem page - its the email link in
    red towards the end of the page. Watch the link go OVER the drums
    as you scroll. (it should go under)
    http://dev.informarch.com/wm/article3/flashBtnScrollexample.html
    Thanks in advance for any help.
    Ken

    Hello,
    Try this and see if it works
    In your HTML go to where the <object> tag is that loads
    your flash button.
    Add this parameter within it.
    <param name="wmode" value="transparent">
    Then add the following inside the <embed> tag
    wmode="transparent"
    This is taken from an article from this site
    http://www.bigismore.com/flash-related/flash-zorder-always-on-top/

  • After successful install, all my adobe cc docs, when open, change pointer arrow, i-beam and window to oversize. When doc closes all return to normal size. I'm on a PC. Screen res set to medium 1920x1200. Any ideas how to fix?

    After successful install, all my adobe cc docs, when open, change pointer arrow, i-beam and window elements to oversize. When doc closes all return to normal size. I'm on a PC. Screen res set to medium 1920x1200. Any ideas how to fix?

    Ok thanks Linxup I would recommend posting in the respective forums for each of those software titles as opposed to the Creative Cloud Download & Install forum.  The relevant forums are as follows:
    InDesign - InDesign
    Illustrator - Illustrator

  • 6th generation iPod nano automatically turns off when I push het sleep/wake button or when screen turns black after a while. How can I solve this ?

    My 6th generation iPod nano automatically turns off (=stops the music) when I push het sleep/wake button or when screen turns black for power saving mode. Does anyone know how to solve this ?
    I have already tried resetting, connecting to PC/iTunes to check the software version, turning off/on, I don't have any inspiration anymore.
    Thanks for your suggestions!

    Hi VeerleD,
    If your iPod touch unexpectedly powers off, you may want to use the steps in this article to troubleshoot -
    iPhone: Hardware troubleshooting (The steps apply for the iPod touch) -
    Specifically -
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 30 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • Now that I have upgraded to Yosemite I have a problem when I scan documents.  Before, a window showed today's activity.  Now I have to search through all my documents and hope to find what I just scanned.

    Now that I have upgraded to Yosemite I have a problem when I scan documents.  Formerly, a window showed today's activity.  Now, I have to search through all the documents in my history to find what I just scanned.  Sometimes I can't even find the doc.

    Most scan apps have a setting whereas, your scan(s) can go directly to your desktop.  No need to "hunt" for scanned docs.

  • Phone keeps ringing on the caller's end - Is This a Call Waiting and Flash Button Problem?

    I had FIos phone service installed 2 weeks ago.  I am having a sporadic but regularly occurring issue with incoming calls that I think might be related to the Call Waiting and flash button so I am looking for some input.  Before describing the issue here are a couple of things to know:
    - I have my Verizon voice mail service turned off on my account.
    - I have the call waiting function set to off.
    - On my phone handset the Talk and Flash operation is the same button.
    Now here is my issue.  Often but not 100% of the time people are telling me that the phone just rings and rings on their end.  After receiving many complaints since my Fios install that the phone rings and my phone answering machine does not pick up the call I have been calling my home phone number with my cell phone and I have determined the following:
    1.  My home answering machine will pick up the call, however on my cell phone which is the calling end the  phone is still just ringing.
    2.  Sometimes I will press the talk button but there will be dead air but on my cell phone which is the calling end it will still be ringing..  But if I press the Talk/Flash button a couple of times the call completes.
    Since my Talk and Flash button are the same I started to wonder if that is a factor so I repeated scenarios above and found that after pressing the Talk button a couple of times then the call is answered and the phone stops ringing on the caller's end.
    I know that with Call Waiting the caller's end will just keep ringing unless the called end switches over with the Flash button.  So my question is even though I have the Call Waiting function turned off could the combination Talk/Flash button be the reason why the call just rings on the caller's end even though I have Call Waiting turned off?  And f this is the cause then why is it happening and does it mean that I have to buy a new phone that has separate Talk and Flash buttons?
    I hope the above description of my problem makes sense and can be answered.  Thank you

    Without buying a new phone you can test this. Unplug the phone that has the combination button. If its a cordless phone base station with multiple handsets, make sure you unplug those as well. Then use a regular phone plugged in to do test calls (if you dont have one you could maybe borrow one for a couple minutes from a friend, family, or neighbor).
    Anthony_VZ
    **If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
    Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan

  • Flash buttons problem

    Hi All,
    I am looking to attach this code to a flash button on click
    <form method="POST">
    <P><Input type="submit" value="table lamp on"
    name="run_event"></P>
    </form>
    the code above sends a command to run an event to my home
    automation server
    thanks in advance

    You cannot apply links to Flash elements using HTML. All
    interactivity in
    such elements MUST be done in Flash Actionscript.
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    ==================
    "dirtymurt" <[email protected]> wrote in
    message
    news:frdutu$124$[email protected]..
    > Hi All,
    >
    > I am looking to attach this code to a flash button on
    click
    >
    > <form method="POST">
    > <P><Input type="submit" value="table lamp on"
    name="run_event"></P>
    > </form>
    >
    > the code above sends a command to run an event to my
    home automation
    > server
    > thanks in advance
    >

  • Flash button problem

    Hi
    I am quite new to actionscript but when building a simple app
    that calculates amounts when you press on a button it only works if
    I use a library button and not my customised one. I have checked
    that the button is a button symbol and has four states but whenever
    I use my own customised button I get error message...the library
    button works fine with the actionscript.
    Here is the error message I get with my custom button - any
    idea why?
    thanks
    Em
    **Error** Scene=Scene 1, layer=buttons, frame=1:Line 2:
    Invalid mouse event specified.
    on(click) {
    **Error** Scene=Scene 1, layer=buttons, frame=1:Line 3:
    Statement must appear within on handler
    with(_parent){
    **Error** Scene=Scene 1, layer=buttons, frame=1:Line 6:
    Unexpected '}' encountered
    Total ActionScript Errors: 3 Reported Errors: 3

    Know the type of button:
    1. Button Symbols made in library:
    on (press)
    on (release)
    on (rollOver)
    This appears the one you are deploying.
    See
    http://livedocs.macromedia.com/flash/8/main/00001752.html
    2. The Flash Button Component:
    ... where there is a click event handler
    http://livedocs.macromedia.com/flash/8/main/00003114.html
    3. Custom buttons created with a MovieClip Symbol.
    Use Actionscript and the methods for responding to events for
    example onRelease -
    http://livedocs.macromedia.com/flash/8/main/00002499.html

  • Flash button problem in Firefox

    Hello.
    I am using a flash button to replace html email links
    throughout the site as a method to control email spamming.
    A lot of the areas I am doing this, the flash email link
    appears amidst a paragraph of text.
    This seems to work and displays perfectly in IE.
    However, in firefox, the embedded flash object wants to start
    a new line/paragraph which messes up the flow of text.
    Does anyone know a fix for this?
    Here is a link to a page where this is happening. Scroll
    horizontally to the 2nd to last column (under "who would have said
    any cover band would have lasted 18 years?") and note the EMAIL
    link in red in EXPLORER. Then look at it in FIREFOX and see how it
    starts a new line with a gap.
    http://dev.informarch.com/wm/feature/feature.html
    Any help would be greatly appreciated.
    (by the way...I know horizontal scrolling is not
    preferred...but thats not what this thread is about....thank
    you.)

    Hello,
    Try this and see if it works
    In your HTML go to where the <object> tag is that loads
    your flash button.
    Add this parameter within it.
    <param name="wmode" value="transparent">
    Then add the following inside the <embed> tag
    wmode="transparent"
    This is taken from an article from this site
    http://www.bigismore.com/flash-related/flash-zorder-always-on-top/

  • Flash button problems

    The company i work for build computer based exams in Flash MX
    2004 Pro.
    We decided to make the dynamic text boxes which displays the
    exam questions selectable. This is so an external speech software
    can read the text when copied. After doing this the buttons on the
    page that load in the new questions (from inside the action script)
    sometimes stop working, as if they were enabled false... This only
    happens for one or 2 clicks then it just starts going again.
    The pointer changes from the little hand back to the arrow
    and the button stops clicking, even when you are right over the
    clicking area.
    It makes no difference how fast or slow you click it still
    happens.
    There seems to be no pattern in the way that it stops just
    when it feels like it.
    Also i tried moving and the buttons so there a good way apart
    from the text box yet this still seems to happen.
    Asoon as i make the text boxes on screen unselectable it all
    starts working correctly again.
    If anyone has any ideas why this is happening can you please
    reply and let me know....
    or email me on
    [email protected]
    or
    [email protected]

    Hello Ricky.
    I'm not sure if this will solve your problem, though I can
    take a stab at it. Do your buttons contain text also? Sometimes if
    I find buttons with text that is not selectable behaving slightly
    blinky, I make sure the text inside the button is a movie clip and
    the situation resolves. It seems to produce a more stable hit state
    overall.
    I hope this helps, though if not, I am sure someone will
    reply again.
    Jennifer Quigley

  • Encore CS6 Flash Export problem, Grey screens

    Hi everyone,
    I am having a problem with my encore CS6 flash exports, they are not behaving as expected online (seems to be like a loading issue).
    I've tried exporting FLV and F4V and the problem is the same. The same project exported from CS5.5 does not produce this undesirable
    problem. It may be important to say that the project was started in CS5.5.
    I have a button that links to another menu, and I am using videos as 'transitions'. The videos are dynamic after effects compositions.
    When it's online, and you press the button it fills the canvas with a  'grey screen' before starting the video transition. This totally breaks
    the experience and feels like an authoring error. It would be important to note, that this screens only appear the first time you see the flash.
    Somehow the next time you press it doesnt show it.
    I would happily go back to CS5.5 but I started using auto-activate buttons that are only available on CS6 flash exports.
    Any ideas what has changed between this versions flash exports?
    Any help would be appreciated..
    Thanks in advance,
    Cris

    Encore CS6 6.0.2.004, IE9, Win7
    Simple project, DVD NTSC, One menu with one button. One timeline. Menu first play, button linked to timeline.
    Output flash with flv (and again with f4v - same results), No template, keep with flash swf rather than streaming.
    Open index.html locally, must manually enable active content. Menu opens, movie plays. No grey screen.
    Copy entire folder to USB, same result; USB plays on a different PC also.
    Upload to web site; same result.
    Am I doing soething differently from either of you? Are you using templates?
    Factors related to flash security (for local and probably USB playback) can be problems. Various server settings can be problems for on line.

  • Radio Button problem when using Logical Databases.

    Hi,
    I have a report that uses logical database PCH.  I'd like to default the reporting period radio button so that when the report is run it is defaulted to today.
    The name of the screenfield is PCHZTR_D so I set
    PCHZTR_D = 'X'. 
    in the initialisation event but this doesn't work.
    Any suggestions how I can get the reporting period to default to 'today' programmatically.
    I don't want to use a variant.
    Thanks,
    Paul

    Try doing it in the AT SELECTION-SCREEN output Event.
    report zrich_0001.
    nodes: objec.
    <b>at selection-screen output.
    PCHZTR_A = space.
    PCHZTR_D = 'X'.</b>
    REgards,
    Rich HEilman

  • Flash button problem! please help!

    hello-
    I haven't used flash to create a website for a while and I am feeling really lost. I have looked through countless forums and such and tried all sorts of things but nothing seems to be working. Basically- I have a set of 6 soon to be buttons and two movie clips. I want each of the buttons to trigger a certain part of both movie clips to play as well as going to a web page. There is also a little character at the bottom that I want to play part of a movie clip when clicked. (I'm sorry if this sounds really jumbled). I have figured out multiple ways so that when I click the little character it will play the clip-I placed the action to do this in the main timeline. However the action that plays this little movie clip plays it no matter what I click on. How do I make sure that only a certain thing I click on plays the action?
    I'm not sure if I am placing the actions in the correct part of the timeline or what I am doing wrong. I am having trouble finding information on how to keep the actions separate.
    I also want the first 10 or so frames of one of the movie clips to loop continuously except when another part of the clip plays.
    each of the buttons is on a separate layer in the main timeline as are each of the movie clips.
    if you think that you can help I can send the flash file.
    I am very new to any action scripting- and appreciate the help!

    A mouseDown event is a molouse related event, not an interactioon event with an object, so anytime you press down anywhere with the molouse it will trigger.
    Give your buttons/movieclips iinstance names (via the properties panel), and then assign event handling functionaliuty to them.  Let's say you name one of them "btn1"...
    stop();
    _root.frogdance.stop();
    btn1.onRelease = function() {
    _root.frogdance.play(4);

  • Bullet problem when creating text frames and tables in InDesign CS5

    Every time I create a new text frame or table in InDesign CS5 and paste information there, the first row in the table or several lines of text come out with bullet points. I'm sure this is a setting or style at some point I created and now am unsure of how to delete. I would like the new text frames and tables to not include bullet points as a default when imported or pasted. Any thoughts? Thanks!

    Defaults for text in the current document are made with no text selected. Turn off bullets and they should stay off (but check the styles, too, you might have accidentally set a bulleted style as the defualt and you should change the default style instead). If this is happening in all files, you need to do it with nothing open to reset the default for all new documents (existing files, unfortunately, need to be fixed one at a time).

  • Is it possible to define one language for every imported text? And other problems when placing text.

    Problem is, that Indesign cc 2014 does not recognize language correctly. In my case it should always be slovenian (and documents like doc and docx are set to slovenian), but it set it as slovakian. I get many documents from different programs (Word, Libre Office, Open Office ...). And setting every one after placing it into document is time consuming. Word import was working great in InDesign 5.5. Now it just mixes local character formating. Also: importing docx takes too long, and when in document is some picture, it just freeze. So I must first open every doc/docx file and delete every picture/logo that is inside.
    Any suggestions?

    Check the language of your default Character Style. If it's set to Slovakian, change it to Slovenian with no documents open.

Maybe you are looking for