Flash Catalyst 5--Artboard Error and Code Error When Publishing

I am trying to create an interactive document in FC (imported from Illustrator) for the first time, but I am having two big problems.
1. When I run my project, quite a big portion of my outside edges are "cropped" off, and I can't see them in the browser.
2. When I try to publish my project, the first few times it worked fine, and the image wasn't cropped, but the buttons I added didn't work. Now when I try to publish my project, I am getting an error message, saying there is an error in the code. This is really confusing, considering I published the same exact document a few days earlier, and now all of a sudden it wont work. I have since tried publishing different documents, and the same message occurs. All my artwork is rasterized in Illustrator, and my Illustrator file is 3.3 MB.
Can someone please help?
Thanks so much!

Hi Anand,
I understand that you are getting maximum return Code:0152 -tp when you try to import into produciton using CHARM. However, the mentioned return code states that the possible issue is with the Transport tool and route.
I suggest you to check by importing the tp req. using STMS.
Please use the following link to find more info on this.
http://help.sap.com/saphelp_nw04/helpdata/en/7e/c6c2ad98a711d2b429006094b9ea64/content.htm
You can find the information about the same return code in the above link.
I hope this is helpful.
Regards,
Satish.

Similar Messages

Currently using Flash Pro CS5, getting error when trying to open CS4 file. Error is "Slides and Forms documents are not supported in this version of Flash. Please open in previous version.

Currently using Flash Pro CS5, getting error when trying to open CS4 file. Error is "Slides and Forms documents are not supported in this version of Flash. Please open in previous version. Has there been a fix or patch to this issue or do I have to convert back to CS4 to open the file?

Having the same problem in CS6. I can tell you that converting back to CS4 will NOT solve the problem. It seems when support for backward compatibility is discontinued, there's just no way to get
any help at all? Absolute failure to provide any user support so far...

Java Error When Publishing

So I have an applicational prototype that I need to have out by the end of the day today, and all of a sudden Flash Catalyst states that the project cannot be published due to an error. It also said to check the Code view to see what's wrong. Yesterday it did say that the error was a "Java Heap Space" error, but today there is absolutely nothing in the problems listing even though it still outputs that there's an error when publishing the project.
The prototype builds and runs in the browser just fine, but it's publishing that becomes the problem. I am not a Flex developer by any means, but as a user experience designer, I understand how to edit some of the coding, so if anyone could shed some light on this, I will do my best to fix the problem with any solutions that will work.
I appreciate the help guys!
-- Rick

To the original poster, Rick:
If you're seeing a "Java Heap Space" error message, this is a (not very user-friendly) way of the program telling you it's running out of memory. Catalyst tries to detect and warn you when your project is getting too large, but it's not always perfect.
Did you see any warnings about the size of the images you've imported into your project? Very large images can certianly be one source of problems.
Here are a few tips for dealing with large images:
Resize them to be smaller using a another app like Photoshop, before you import into Catalyst. Shoot for a file size of 100-300 KB at the most, for very large "gallery"-style photos. Other images should be < 100 KB (remember, people viewing your site will have to download all this).
In Catalyst, when you're done shrinking down an image to the right size, choose Optimize Artwork > Rasterize in the heads-up display to "lock in" the smaller size.
In Catalyst, choose Optimize Artwork > Convert to Linked Image for any especially large photos. This can speed up the initial load time of your site, and it will also help avoid memory problems when publishing.
Hope that helps!
- Peter

WorkFlow Error when publishing

Hello,
I am having errors publishing workflows. This was working and all of a sudden stopped. From the error message I am taking it as a permissions issue?
Here is the code it spits out:
System.InvalidOperationException: Operation failed with error System.UnauthorizedAccessException: Attempted to perform an unauthorized operation.
at Microsoft.SharePoint.SPAppPrincipalManager.GetManager(SPWeb web)
at Microsoft.SharePoint.WorkflowServices.SPWebWorkflowSecurityContext.EnsureAppPrincipal(SPWeb elevatedWeb)
at Microsoft.SharePoint.WorkflowServices.SPWebWorkflowSecurityContext.<SetupApplicationEcosystem>b__3()
at Microsoft.SharePoint.SPSecurity.<>c__DisplayClass5.<Run
Anyone have any thoughts? This happens with all sorts of workflows, even basic ones as shown in the above example!
Thanks,
Will

Hi,
For your issue, Re-register the workflow service using command:
Register-SPWorkflowService -SPSite 'https://myhost/mysite' -WorkflowHostUri 'https://workflowhost' -AllowOAuthHttp -Force
Reopened SharePoint Designer again and test again.
Here are similar posts, you can use as a reference:
https://social.technet.microsoft.com/Forums/en-US/61b2cfad-355d-4a43-8dd6-7d6813cd1b2f/sharepointdesigner-error-when-publishing-a-workflow?forum=sharepointcustomizationprevious
http://sp2013.pro/2013/04/solution-errors-were-found-when-compiling-the-workflow-the-workflow-files-were-saved-but-cannot-be-run-cannot-set-unknown-member/
Best Regards,
Lisa Chen
Lisa Chen
TechNet Community Support

404 error when publishing to FTP server.

I'm getting the 404 error when publishing my iWeb site to my FTP server. Please help.
It says I have a good connection and publishes but then I get the error when I "Click to go to the site." I've read where I have to upload the file to my server but with the file index_html. Do I rename my iWeb file, domain, to index_html?

I'm getting the 404 error when publishing my iWeb site to my FTP server. Please help.
It says I have a good connection and publishes but then I get the error when I "Click to go to the site."
A 404 errors means the file is not on the server.
Checking the connection is just testing the FTP connection.
I've read where I have to upload the file to my server but with the file index_html. Do I rename my iWeb file, domain, to index_html?
Do I rename my iWeb file, domain, to index_html?
No, you don't. The domain file is where iWeb stores its assets. It stays on your computer. It has no meaning outside it. iWeb publishes the index.html file and all the other files.
Read this : The concept of iWeb Sites
So if your pages do not load, check for their presence on the server.

Window error when publishing Muse change, can't pubish page update

Window error when publishing Muse change, can't pubish page update. Any suggestions?
It happens after I updated my website payment page with a new Paypal html. That html is below with x's put in to the code. Why doesn't Muse or Windows like this code in Muse?
<script type="text/javascript" data-pp-pubid="9xxxxx6cec" data-pp-placementtype="540x200"> (function (d, t) {
"use strict";
var s = d.getElementsByTagName(t)[0], n = d.createElement(t);
n.src = "//paypal.adtag.where.com/merchant.js";
s.parentNode.insertBefore(n, s);
}(document, "script"));
</script>

Window error when publishing Muse change, can't pubish page update. Any suggestions?
It happens after I updated my website payment page with a new Paypal html. That html is below with x's put in to the code. Why doesn't Muse or Windows like this code in Muse?
<script type="text/javascript" data-pp-pubid="9xxxxx6cec" data-pp-placementtype="540x200"> (function (d, t) {
"use strict";
var s = d.getElementsByTagName(t)[0], n = d.createElement(t);
n.src = "//paypal.adtag.where.com/merchant.js";
s.parentNode.insertBefore(n, s);
}(document, "script"));
</script>

Error when publishing a catalog

Hello Experts
We are on SRM 4.0 EC and using CCM2
When Publishing the catalog we get the following error message
Catalog item 4462E4E0CE721B3DE10000000A70D7C7 not found
Catalog update was terminated
The exception occurred (program: /CCM/CL_PE_REQUEST_SERVICE====CP, include /CCM/CL_PE_REQUEST_SERVICE====CM00F, line: 89)
Any suggestions why this is happening?
How can identify what the catalog item "4462E4E0CE721B3DE10000000A70D7C7" is ?
Thanks in advance
Prakash

Hi
<b>Please go through following SAP OSS Notes as well.</b>
<u>Note 904420 - Tolerating inconsistencies in the view relationship
Note 852622 - "Category not found" termination at publication
Note 821533 - Value assignment for characteristic invalid; Not assigned ch</u>
Hope this will definitely help.
Regards
- Atul

Error when publishing to file

i keep getting "an unknown error" when publishing to file or publishing all to mobileme...
It still works if i just publish to mobileme.
Any ideas?
Im trying to get my site going on go daddy, and kinda really need it in a folder...

If you are still getting the error then its likely that you have a corrupt domain file.
To prove this, quit iWeb, create a new folder on your desktop and drag your domain file out of - Home Folder/Library/Application Support/iWeb - into this.
Relaunch iWeb to force it to create a new domain file, add some content and try publishing to a folder.
If this works, your original file is corrupt.

Adobe Captivate 6 Error when publishing

Help! I having trouble publishing a training that my employees can view. When they open the project they are getting the first image here that is essentially blank. I have attempted to reduce the size and save to different folders etc. but nothing seems to work.

Hi there,
Could you tell me the complete version of Captivate (Help > About Adobe Captivate). 6.0.1.240
Which version of Adobe Reader or Acrobat are they using? Adobe Reader XI
Can you publish this locally on your system (not to network drive directly), check force republish option also, and are you able to view it on your end? I can pull up the file from my computer that is saved in the same drive that the agents are attempting to pull up. But, I am not sure if it is viewing for me because I have it on my system.
Re: Adobe Captivate 6 Error when publishing
created by Varun Kalra<http://forums.adobe.com/people/Varun+Kalra> in Adobe Captivate - View the full discussion<http://forums.adobe.com/message/5855412#5855412

SharePointDesigner - Error when publishing a workflow

Hi.
When i´m publishing my workflow, sharepoint designer rises the following exception:
"Error were found when compiling the workflow. The workflow files were saved but cannot be run." - "Unexpected error on server associating the workflow."
The workflow is really simple; i used some custom activities (to read details from an attached excel document) and then i have to do many checks and about 12 approvals.
I have recreated the workflow and it seems that adding the 7th approval creates this error; when publishing with 6 approvals everything is fine.
My Question: What is the error, where can i find more information regarding this issue, maybe it´s a bug in designer? Are there any known workarounds that can help? I really need so many approvals :-)
Is there a way to split the workflow in 2 or 3 parts, that can do the "job" of the big one?
I´m using Sharepoint Server 2010 with the current SPD (-> Microsoft Information Worker VM).
Thx for help

I finally found a solution how to solve this issue:
In the web.config file of the current site collection (where i was publishing my workflow) i have appended a timeoutvalue for my requests:
Old entry: <httpRuntime maxRequestLength="51200"/>
New entry: <httpRuntime
maxRequestLength="51200"
executionTimeout="300"
/>
This will give my workflow some more time to publish!
Source: http://www.manjuke.com/2011/05/fixed-sharepoint-designer-error.html

Publishing error when publishing one section

I am publishing my material per module and receive the following error when publishing one of the modules:
Publishing Activity Log:
Task
GMT Training Guide / Creating numbering styles in document
Path
/49b77e2d-7666-443e-a2fa-edbfc9aa22b2/Parts/pr.oxmlprint.multi.xml
Comment
Processing project failed
Ref. #
-1673847682
All of the other modules publish with no problems.
Any assistance in this regard would be much appreciated.
Thanks,
Angie

Did you copy the text in there? Could be the following:
The problem is related to concept frames. Some concept frames have not regular charachters. Those characters aren't visible in the edit mode. The are only visible if you copy the text of the concept frame to word. In word use the button "display unknow characters". It seemed like they will appear if you copy and paste text in the conceptframes.
You need to copy the text of the editor to Word. Click on the button "display unknown characters" to see all characters in text (including e.g.enter and spacebar). Remove the strange characters such as small circles. Copy the text and paste it back into the editor.
Save the editor (and publish again).
Good luck.

Flash Catalyst Start Up Error

I'm getting the following error when opening Flash Catalyst CS5.
Any suggestions to correct this?
An error has occurred.
See the log file
/Users/[USERNAME]/Library/Application Support/Adobe/Flash Catalyst/configuration/1273624005039.log.
Here's my system config:
Model Name: iMac
Processor Name: Intel Core 2 Duo
Processor Speed: 2 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 4 GB
Bus Speed: 800 MHz
Boot ROM Version: IM71.007A.B03
SMC Version (system): 1.20f4

UPDATE: So when I looked for the file, I couldn't find it right? Well, when I went back to the folder to show my husband what I was misisng, the file appeared. So I restarted catalyst and it opened no problems. Must be a security issue thing with Windows that prevented Catalyst from accessing that folder becasue it was "locked" when I tried to access it initally. Seems like a Wondows thing.

Trying to update Flash Catalyst from pre-release and it will not install

I had Flash Catalyst pre release. Then I purchased CS5 Web Premium (for Mac) when it first was released. I tried to use Flash Catalyst today for the first time since my Premium install and it told me that the license had expired due to it being pre-release. So I used the license that came with Web Premium and it accepted it (with the green checkmark) but when it actually tried to run, it gave me the error again. So I went to Adobe Downloads and downloaded Web Premium again, assuming it would update the FC. Instead it told me it was already installed as pre-release software. So then I moved the FC application to the Trash, cleaned the Trash, restarted my machine and did the whole process again. It still says FC is there - and it spends one minute doing I don't know what, but it is not installing the software - I can't find it anywhere on my machine. HELP - I wanted to use this for a presentation next week.

Hello Mettiuss,
Thank you for using Apple Support Communities
It sounds like you are unable to uninstall iTunes so you can install a new updated copy, and if so, I recommend taking a look at this article named Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7 found here http://support.apple.com/kb/HT1923
Take care,
Sterling

Error when publishing and unable to view SWF

Hi,
I am currently working on a project in Flash and I can not
publish, test or view the action script. I have around 20 different
Flash files that I have created but only 2 work 100% fine. But last
week they were all working fine.
When I try to open the SWF it is all blank!
Here is the error code, AppName: flash.exe AppVer: 9.0.0.494.
I am not the only person to have this issue, as the link will
prove,
http://www.developmentnow.com/g/68_2007_9_0_0_1021366/Constant-error-message-Need-Help.htm
Does anyone know why this is happening? The only thing I can
think of doing is re-installing.

I have re-installed flash player 9 and downloaded the update.
I think it’s more to do with Flash 9.
I have a legitimate copy of flash as I work for an IT
consultancy.
I have also re-installed Flash 9 but the error still occurs!
I don’t know what to do?
Thanks for your help, do you have any other ideas?

In Flash Builder: "No Disk" Error when trying to switch to Design View

Just had Flash Builder Beta 1 uninstalled and Beta 2 installed instead.
When I try to switch to Design View or open a link from Start Page in Flash Builder Beta 2, the application freezes and "No Disk" error message pops up.

You have some other problem with your boot drive that has corrupted data backed up to the TimeMacine drive.
My advice is to boot into each operating system and manually backup just your Users files each to separate regular external drives (no Timemachine or backup software) and disconnect.
Make a note of any serial numbers, emails, address book contacts, export bookmarks etc. that isn't typically in your users folders data.
You might be able to Winclone 3 the Windows as a whole thing as it's appearing not to have issues but it's your MacintoshHD partition that is so that will have to be rebuilt from scratch.
Most commonly used backup methods
If your OS X parititon doesn't boot, you can use this to recover files.
Create a data recovery/undelete external boot drive
Without any further detail about your machine I can't advise specifically what to do, but it involves using Disk Utility to Zero Erase (move slider one spot to the right or in 10.6 using Security Option) the ENTIRE boot drive and reformatting, then installing OSX fresh and then setting up BootCamp again.
If you wish to switch your boot drive for something better, this is a good time to do this.
Install/upgrade RAM or storage drive in Mac's
If your machine is capable of Internet Recovery, then use that, then upgrade.
If your machine came with 10.6 or earlier, then use the 10.6 install disks and work up from there.
Erase, formatting, OS X installs on Mac's

Flash Catalyst 5--Artboard Error and Code Error When Publishing

Similar Messages

Maybe you are looking for