Flash CC 2014 Drawing with tablet creates straight lines

I recently downloaded Flash and Photoshop from the free student service and when I use my tablet Intuos4, the lines you see are drawn but it's also draws in the far left, the start of the straight line is where I actually start but for some reason it draws a straight line shifting to the left.
I checked if it was my shift key from the keyboard and tablet to see if it was jammed, but on the bottom half of the canvas you notice that when I do use my shift key it still draws straight lines and still goes to the far left.
I updated my drivers for my tablet and it still didn't do anything, it doesn't happen to any other program like Photoshop, it detects the tablet and draws normally.
Help please?
http://oi59.tinypic.com/2r6igjq.jpg

Hi.
I am experiencing some serious issues with flash professional cc and my drawing tablet. Every time I place my drawing pen on the surface of my tablet, while in flash professional cc, a long straight line darting to the left and beyond my canvas occurs. I haven't messed with any of my settings for I just got the tablet today as well as the flash professional cc program. It's very frustrating and is hindering my work. If this problem is not resolved, I will take my business and money elsewhere.
Thank you.
All specs:
Flash Professional CC 2014 v. 14.1.0.96
Windows 7
Monoprice Graphic Drawing Tablet 10x6.25 inch 4000 LPI, 200 RPS, 2048 Levels

Similar Messages

Photo Merge now creates straight line merges...

In the old days when I did a Photo Merge from Bridge I would find that the merged document would have multiple layers with masks that had quite irregular edges (as expected) and therefore smooth fills. Ultimately PS produced really good panoramas with VERY LITTLE EFFORT required.
Sometime recently, and I'm not sure which CC update it was, this all stopped working and now my merges have straight line edges and sharp non-graduated fills. Where the panoramas have straight lines in the shots or clear changes (like skylines) they jump at the merged edges and are not smooth.
What has happened? What am I missing? What new settings are required to use Photo Merge? I have checked all the obvious places in both BridgeCC and PhotoshopCC 2014 and nowhere does it mention any new controls. I have checked the various help videos and nowhere do they use any methods that I do not use. Why do they get smooth transitions when I am not?
Now I am using PSCC 2014 on a Windows 7 laptop with a smallish hard drive (SSD) and not a huge amount of room (20-30Gb drive available at most) but this wasn't a problem previously and even when I make more space available the problem persists. Am I going to have to wait until I am home and have access to my desktop with 32Gb RAM and TB of available drive? Hope that isn't the case as it will be 3 months away.
Now if this website would allow me I would add a JPG of the PS window to show the problem but it won't let me upload the file even though it is less than the 4Mb limit in size. Then we get back to entering this forum which required me to log-in to my Adobe ID 15 times before it let me start a discussion...

I've finally managed to get a screen shot into this forum.
I have deselected 2 of the frames to show the straight edges of the masks.
Now zooming in to the right hand join we see the skyline has an abrupt join...

After Effect CS5.5_Pen tool problem: No Handles display, can't creat straight line

Hi,
I wonder why in After effects CS5.5, the pen tool doesn't work correctly!
1. "no handles display", ex: when I click an area whilst holding the mouse and clicking / or hold Alt and clicking the point in order to see the handles.
2. cannot make "straight line", neither can I make 45 degree coner while holding the shift key clicking.
I coud use it before, but now it no longer work. I tried "the pen tool" in photoshop cs5.1 it works very well.
Is there any solution?
Thanks

Thanks Rick,
1. Do you have the View Options setup correctly?
Yes, I guess. Beacuse everything is checked.
2.Have you hidden the layer controls?
No.
Are you using Roto Bezier?
No.
3....If it's not try trashing your prefs.
How do you trash the prefs?
I didn't modify any setting in the prefs.
Btw, what does that title stand for "community professional"? Are you working for Adobe?

Why does my Wacom tablet only make straight lines with the pencil & brush tool even WITHOUT shift?

I have Photoshop CS3 on Mac OSX 10.5.8 on a white MacBook and I'm using a Wacom CTE-630, and I always had the correct drivers.
Yesterday I discovered that the brush and pencil tools were incapable of doing anything but a dot or a straight line while I used my Wacom tablet. Using those tools with the touchpad works perfectly! Curves and squiggles abound! But for some reason I can't do it with my tablet.
And I yes I tried downloading the latest drivers from the Wacom website... to no avail.
After looking through forums I discovered that it was a problem experienced by users of tablets of other brands, I couldn't find any mention of Wacom tablets having this issue. And then I saw a thread somewhere that mentioned holding shift created straight lines! So I immediately thought that perhaps photoshop was functioning in reverse or maybe my shift button was broken...
So I pressed shift, and something different happened, if I made a dot on the page a line would automatically appear, connecting that dot to the previous dot I had made. Which is in contrast to the issue I had been having which goes something like this:
If I try to make any curved lines, a dot will appear where I first made contact on the page and then when I release the pen from the tablet a straight line will go from there to the dot at the start of the line. In other words, a dot appears when I start a line and no matter what I do with the line after that, a straight line goes from where I ended the line to where I started it!! ARGHHHH!!
And it turns out It's not a Wacom problem, or it doesn't seem to be, because it works fine with the brush tool in Illustrator CS3.
So I came to the conclusion it was Photoshop that was at fault. I found nothing on these forums related to my issue.
I hope someone can help. Because I was really itching to start digitally painting again. =(
Thanks in advance!!

Yes I did solve the problem!
Thanks to everyone that suggested things, but none of them worked. In the end it was Wacom, yes... WACOM that solved the problem. Even though it was an Adobe Photoshop issue as far as I could tell. So thank you Wacom, you helped me when I needed it most.
So now to the vital solution:
"Thank you for your recent enquiry regarding pen tool in Adobe Photoshop CS3.
Please try the step below for reset CS3
For MAC, please hold pressing command + alt+ shift, then open Photoshop.
Get the CS3 update. Start CS3 while holding.
If the problem remains, uninstall and reinstall Adobe Photoshop CS3 again."
Worked the first time for me. So spread the word! This issue shall trouble people no more, a solution has been found!

Drawing with touchpad

Hello, fellow friends!
Moments ago, I first time tried to install Adobe Photoshop on MacBook (Mac OS X v10.6.6). I downloaded Photoshop CS5 trial, installed it, and everything worked almost okey, but I have a problem, which I don't get clear: When I draw something with brush, it goes like shift is pressed, and I can't draw nothing else, than straight line. I don't know, how to explain, but on Windows, if you press Shift, it draws straight line, but here - even nothing need to press.
As I don't have mouse, I'm using touchpad, but I don't know, if this makes any difference.
Please help me with this

Try resetting tools .
- Vishal
http://www.google.co.in/url?q=http://www.wonderhowto.com/how-to-reset-tools-photoshop-1841 95/&sa=U&ei=KshRTdPCDIjSuwP1wvnpCQ&ved=0CBIQFjAA&usg=AFQjCNGD6lMCMUHZlUKTPBEQ6Mm9AFZEow

Drawing with a pencil = circles and rectangles

When I am drawing with a pencil, the line looks like the shape I want to draw, but when I stop drawing, the shape reshapes to another shape whick looks like circles and rectangles = it does not look like the shape I wanted to draw. What is the problem?

at the bottom of the tools panel click the pencil mode icon and choose ink or, use the brush tool if you want no adjustment to your drawing.

How to Stop Flickering Straight Line in CS4

Hi all,
For some reason CS4 cause all my straight lines to flicker. For example, if I have a video of a form with lots of straight lines on it, the rendered video of the form flickers like crazy?? I've tried to use the Anti-Flicker Filter but it made it worse?
Please!

More information is good
Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037?tstart=0
What is a CODEC... a Primer http://forums.adobe.com/thread/546811?tstart=0
What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037?tstart=0
For PC http://www.headbands.com/gspot/ or http://mediainfo.sourceforge.net/en
For Mac http://mediainfo.massanti.com/

Drawing with a graphics tablet in Flash

Hey community!
I recently got the newest version of Flash and wanted to do some drawing with my graphics tablet, but whenever i try to draw a freehand line, using the pencil or paintbrush tool, then for some reason, it draws a straight line leading to the bottom left side of the screen, and i have no idea why it is doing this.
When i use the tablet to draw in Photoshop, then it works absolutely fine, but not in Flash
Any help will be lovely!!
Thank you

Hi,
The issue is resolved in the latest update of Flash Pro.Please update Flash professional to 14.1.0.96 .Follow the instruction below for the same :
Installation instructions
Log out and log in to the CC desktop application. Update the application when prompted.
You should see the list of new updates as soon as the new CC desktop application is launched.
Install Flash Professional CC and Mobile Device Packaging app. On a high speed connection, it took me around 8 minutes.
After the application is installed, you can launch the application directly from the desktop app by clicking on it.
Thanks & Regards,
Sangeeta

Jittery lines when drawing with pencil tool in Flash

When drawing with the pencil tool using an Intuos Wacom tablet, the lines are jagged and create several points along the jagged line, making the pencil tool unusable. Does not occur with any other program. Using Flash CC Pro 2014.

Hi Jessy,
Can you please provide the following details to understand the issue .
What is mode of pencil you have set to draw like straihgten ,Smooth or Ink ,and if it smooth mode what is the smothing value you have set .
Wacom driver version.
do you see this problem in any previous version of Flash.
Thanks!
Latha

Can Flash create dashed line with blunt not rounded dashes ?

Hi,
using Flash8
I can select line tool and dashed line in properties and draw a dashed line and get a line of sausages. How do I get a line of dashes without rounded ends to each dash ?
Line option has end caps option with None (gives straight or blunt tip to line, round gives rounded tip .
Draw a line with None and its got blunt ends, select it and choose dashed line option and it gets round ends to the dashes, the end cap option is greyed out !
Are dashed lines with blunt dashes now possible again with CS4, a forum poster also found that CS3 no longer gave blunt dashes ?
Why do I ask:-
I am trying to bring a map into Flash8 from Illustrator (Illus version 10 as it allows blunt tip lines to remain blunt it was said on the forum)... which has blunt ends to roads and has blunt type dashed lines. The roads remain blunt..GOOD !..but the dashed lines become what looks like a solid line. BAD !
I do a right click - break apart, then double click one of those now solid lines that should be dashed, and I am able to select a portion of the line, it is no longer a continual line as drawn in Illustrator. Properties shows it as solid line. Flash8 obviously having a problem with supporting Illustrator 10 dashed line then !
Select dashed in properties box and I get a portion of the line as sausage dashes, but working my way along the line doing each bit sees a far from correct dashed line result as sausages dont start stop evenly as each line is a separate entity and ignores the previous line.
Looks like I shall have to try and draw the line as one long line again in flash but unless I can give it blunt dashes when done, there is no point even trying that method, hence my question.
Would the latest Illustrator and Flash versions (CS4) allow blunt type dashed lines to appear in Flash ?
This is crucial for bringing maps into Flash.
Envirographics

I noticed one problem with my solution.
If you look, very carefully, at the end of the stream, it's flat. Not rounded like it should be. After a bit of trial and error, I tried a different brush:
Note that, in addition to the rounded rectangle (done with the new corner controls in the latest version of Illustrator CC that just came out) and the three circles, there is also a rectangle, with no stroke and no fill, to provide a space at the end of the three dots. Here is the result:

Flash CC 2014 fees associated with publishing an app on both android and IOS platforms

I have a client thats wants an app done, the app would best be created in Flash CC 2014 as it based to run like a book with buttons on each page for a viewer to click. The viewer clicks the button of thier choice on each page and at the end of the book if the score is over 1000 a bonus page will appear, if its under it will say try again.
Client needs this in both IOS and Android so I need to know the extra fees associated with this
my fee for creating ( I know)
Android certificate fee?
IOS developer fee 99.00 ( I know)
Did I miss anything is there a fee to go from Flash to AIR?
plz advize'
thanx'MD

matthewdee wrote:
Ok so , my fee and the Apple developers fee if the client wants to sell in App store or not, correct?
correct.
But NO android fee ONLY id developer wants to seek in lets say Google play correct?
there's no android license fee needed to develop for android. there's a fee to upload/list apps with amazon marketplace and google play.

Cannot Draw Freehand with Tablet in PSE8

I'm sort of a newbie at Photoshop, so I don't know if I need to enable something or if it's just a bug.
Anyway, I just installed Photoshop Elements 8 onto my laptop that is running Windows Vista Home Premium. I open the Editor and I can draw freely with my mouse, but not with my Bamboo Pen tablet. When I try to draw something with my tablet, all PSE8 does is show one straight line or not show any lines at all. Am I just doing something wrong?
By the way, I've uninstalled and reinstalled this software 5 times. No use. It didn't change anything.

First, make sure the mouse is not on the tablet when attempting to use the stylus (pen).
Check that you have something checked in the brush options panel. See this page:
http://www.the-graphics-tablet.com/photoshop-elements.html
Video on using tablet options:
http://www.youtube.com/watch?v=ghMvJ1VL79E&feature=channel
You might also check the Wacom site and see if the driver is up to date.
http://www.wacom.com/downloads/drivers.php
BTW, I'm pretty sure you should reboot/restart the computer after updating the drivers.
You might also check your Bamboo Tablet properties. You'll want to do that anyway. Here's a video on doing that:
http://www.youtube.com/watch?v=0dgcZpKWQIU

Problem with creating a straight line with polygamo lasso

I am having a problem with polygamo lasso. when i create a triangle or a rechtangle in straight line it is turn out the line become not straight. I don't what did i wrong, was always working fine till today. YOu can see the pic the top line lookslike a step.

Ihope I did right, was not sure how to save as channel.

I am facing issue when opening flash files in Flash CC. (error:- This file was created with a later release of Flash Professional and might contain new features that would be lost when saved in the current format.)

I am facing issue when opening flash files in Flash CC. (error:- This file was created with a later release of Flash Professional and might contain new features that would be lost when saved in the current format.)

Wow. Okay...
I'll let the real veterans in this forum tackle your issues one after the other. But, I can tell you, all will be well.
My only comment would be re: your computer specs:
BJReis wrote:
. This may be due to somewhat older equipment:
GHz Intel Core Duo MacBook Pro with a 4GB memory computer with Ddr3 running OSX 10.8.4
To be completely honest, FCPX is a RAM hog. It just is. But, RAM is relatively cheap, and the pay-off is good.
4GB is right on the edge, IMHO. 16G is ideal.
I wish you luck, hang in there, and standby for more help.

I am facing issue when opening flash files in Flash CC. (Error : - .fla was created with a later version of Adobe Flash Professional CC and might contain new features not supported in this version of Flash professional.)

I am facing issue when opening flash files in Flash CC. (Error : - .fla was created with a later version of Adobe Flash Professional CC and might contain new features not supported in this version of Flash professional.)

fyfesa1970 wrote:
Ask a simple question and get a simple answer...see below...hilarious:
All representatives are actively assisting other customers. Your estimated wait time is 0 minute(s) and 1 second(s) or longer. Thank you for your patience.
We all can learn from this. Whenever you get stuck in a customer-service situation that goes nowhere, as soon as you become aware of the futility, get the name and employee ID of the person, then say, "I don't mean to be rude, I think we're both wasting our time. Perhaps you weren't trained for this issue, or perhaps your system isn't displaying the correct information. It doesn't matter, because I'm not getting proper customer support this way. Please ESCALATE this to your highest-level manager IMMEDIATELY. If that person isn't availabe, ESCALATE me to that person's highest-level manager. If you haven't been given the proper training, you can use this to inform your manager that you need the training. Thanks for trying to help. I appreciate it. I have copied and saved this chat session. NOW PLEASE ESCALATE THIS CASE AS I HAVE REQUESTED ABOVE. I'm waiting now... "
The point is that you're a customer, and the company needs customers, so the individual who's failing to deliver good service needs to be identified so they can be properly trained, and so that problems in the system can also be identified, but more important is that you get the service you're entitled to.
If you search the forum for similar questions, you'll see the kind of information that the volunteer users like yourself on the forum need to know about your system and files involved, so they can help you better.
Good luck.
HTH
Regards,
Peter
Peter Gold
KnowHow ProServices

Flash CC 2014 Drawing with tablet creates straight lines

Similar Messages

Maybe you are looking for