Flash CC 2014 unusable on Surface Pro

Flash CC 2014 on Surface Pro with "disable display scaling on high DPI" checked is unusable.
It's difficult to explain the problem, but basically all content within any window (including tool bar window) is pushed to the right, so far that it is inaccessible. I'm not exaggerating when I say it's unusable. No mater how large you make a window, all the information stays outside of it.
This is a serious issue to me, please tell me that Adobe is trying to fix this.

Flash CC 2014 does not function on the Surface Pro 1 whether display scaling is on or off.
When "disable display scaling on high DPI" is checked:
As I mentioned, it looks like the screenshot above (with windows offset to the right). If I were to draw a line with the pencil tool, the line would actually appear offset to the right -inches away from the stylus.
With "display scaling" unchecked:
The windows are not offset in this case, BUT using the pencil tool has a slightly similar effect. As soon as the stylus simply touches the canvas, a line appears from where the stylus is touching reaching across the screen to the right.

Similar Messages

Issues with the Surface Pro 3's pen in Photoshop CS6

I used photoshop CS6 with no problems on my old computer that was connected to a graphics tablet.
However, I recently bought a new windows computer called the Surface Pro 3. Everything works perfectly with the trackpad and touch, but I've had some issues with the Surface pen.
The pen can draw on the canvas, but whenever I click something on any of the windows with the pen, the entire application freezes and I would have to click the computer's taskbar at the bottom to unfreeze the application.
It's impossible to work like this. Is there any solution to fix this problem? It says that the version of photoshop I have is Adobe Photoshop Version: 13.1.2

If you have Photoshop CS6 version 13.1.2 which is the Subscription version of Photoshop, You shoule Isstall Photoshop CC 2014 on your surface Pro 3. It will work without problems on the surface Pro 3 and you will also have the option have the option to use Photoshop CC 2014 preference 2x UI to scale Photoshop's UI up in size on your Surface Pro 3.
If you do not have a subscription the Perpetual version of windows CS6 should be version 13.0.1.3. In that case the only way to scale Photoshop UI is to have windows do it. You would need to to update your windows 8.1 registry and add an external Photoshop manifest file in your Photoshop CS6 folder. To get the Surface Pro 3 pen to work with Photoshop you would need to install NTig pen device drivers the support the wintab APIs.
You will not be able to use Photoshop without a keyboard popping up the windows onscreen keyboard is too cumbersome. You can use a utility like Touchkey to create Overlay touch keys on Photoshop and use Photoshop without a keyboard.
The differece betweek Adobe 2XUI scaling an windows scaling ise windows scaling scalet the image areas as well as the Photoshops UI
A couple of touchkey overlat keyboards could look something like this

Photoshop 2014 keeps crashing under Windows 8.1 on a Surface Pro.

Team,
Photoshop 2014 keeps crashing under Windows 8.1 on a Surface Pro.
I have tired.
1. Updating Intel Graphics Card. (unsuccessful)
2. Logging in and out of creative cloud. (unsuccessful)
See log below.
Faulting application name: Photoshop.exe, version: 15.2.0.236, time stamp: 0x542531ba
Faulting module name: ntdll.dll, version: 6.3.9600.17278, time stamp: 0x53eebd22
Exception code: 0xc0000005
Fault offset: 0x0000000000024ac8
Faulting process ID: 0x1448
Faulting application start time: 0x01cfe6c7bd37e765
Faulting application path: C:\Program Files\Adobe\Adobe Photoshop CC 2014\Photoshop.exe
Faulting module path: C:\windows\SYSTEM32\ntdll.dll
Report ID: 072b7ff9-52bb-11e4-825f-600292e27add
Faulting package full name:
Faulting package-relative application ID:

Well it came installed on my brand new Windows 8 pro w530 I received 4 weeks ago and has never worked. When you try to open power manager it just crashes. If you uninstall it the Lenovo software just keep reinstalling it. If you uninstall the Lenovo PM driver but do not reboot you can then open Power Manager. The minute you reboot the Lenovo software reinstallls the driver.
Why would Lenovo install software on a brand new Windows 8 laptop that is broken and useless? Tech support is absolutely no help they transfer you to the software department which wants to charge you to fix a problem that Lenovo created!!! It is crazy!! I was hoping someone here could solve this problem or maybe someone at Lenovo would see this and get the problem resolved. Tech support has been useless. I reported the problem to them at least 5 times.

Adobe Premiere CC 2014, regularly licensed (Mac Pro early 2008, Mac OSX 10.9.4).Adobe Premiere CC 2014, media offline, not playing, unusable.

Adobe Premiere CC 2014, regularly licensed (Mac Pro early 2008, Mac OSX 10.9.5, Graphic Card: NVIDIA GeForce 8800 GT 512 MB).
Hi guys,
since the CC2014 version of Premiere has been released (on Creative Cloud) I'm experiencing - really often - the MEDIA PENDING (yellow background) issue... even if the clip can be found right clicking and selecting "reveal in finder" or "reveal in project", in the timeline the clip can't be played. Not to mention the many many problems the app is causing stopping working suddenly and obligating me to restart the system to have it regularly working again (usually it stops reproducing the video, only the audio stays alive, but the playhead seems freezes there where I left it).
One more problem: all the app (and customized) keyboard shortcuts are gone. Totally disappeared (this happened just after the last update, CC v8.1 Caravan. Synching from CC was unsuccessful.
Please don't suggest me to contact the adobe italian service to have an help... the last time (almost the same problem) they just made me lose time with some basic procedure checks that I knew were not leading me anywhere.
I ask sorry for my polemic tone, it's a few months that Adobe Premiere is not working anymore as before. And you can't immagine how many hours I've lost.
Thank you very much,
My best regards,
Stefano Bianchi.

Kevin-Monahan wrote:
Also, a 512 MB VRAM GPU is really underpowered
Guys, would you suggest me a new graphic card (in case, which model on this Mac - would be great a 4 or 6 MB VRAM GPU) or a new Mac Pro? This is still a great machine, but it's starting becoming unusable due to this Premiere issue (that is day by day more severe).
Thanks a lot for any suggestion,
Stefano.

Cannot draw in Flash Pro CC on Surface Pro 3 with latest N-Trig drivers...Is there a current fix?

Cant draw in flash pro cc on surface pro 3 with latest n-trig wintab drivers. Many others online say they have this issue on surface pro 3 also...Is there not some type of current fix. Someone on the adobe forums said the problem was fixed internally in flash pro and that the fix will come with next adobe flash pro update, but when is that?
Flash updates don't exactly come every month or even 2 months, and this issue needs some type of current fix because there are many ppl also having this issue, which basically makes Flash Pro useless, what good is an animation program if you cannot draw in it on a tablet that literally SPECIALIZES in pen/drawing usage. So anything out there ??

bump
its very frustrating as I'm paying monthly for CC and can't use one the programs I need for my design job! Looking at other programs.

Illustrator CC 2014 crashing on brand new Surface Pro 3. ntdll.dll error

Illustrator CC 2014 crashing on brand new Surface Pro 3. ntdll.dll error
Event log:
Illustrator.exe
   18.0.0.18
   53880380
   ntdll.dll
   6.3.9600.17114
   53649e73
   c0000374
   00000000000f87a8
   1c5c
   01cfada4daa6f194
   C:\Program Files\Adobe\Adobe Illustrator CC 2014\Support Files\Contents\Windows\Illustrator.exe
   C:\windows\SYSTEM32\ntdll.dll
   1b0d17fe-1998-11e4-826e-60029244db05

bitlocker encrypts your drive making it difficult to run programs that require constant access to your drive--it should be 'off'--however--just turning it off won't solve the problem. You need to turn it off and decrypt the drive
see below
To turn off or temporarily suspend BitLocker
Click to open BitLocker Drive Encryption.
Do one of the following:
To temporarily suspend BitLocker, click Suspend Protection, and then click Yes.
To turn off BitLocker and decrypt the drive, click Turn Off BitLocker, and then click Decrypt Drive.

Surface pro 3 with illustrator (2014) update.

I was curious if anyone has made the plunge on the new surface pro 3 and had any time with the new Illustrator update (2014)? Does the UI scale? wintab driver issues? Color reproduction accuracy? I'd love to hear some feedback from the illustrator community on this. I've only found one youtube video on this topic. If you want to see it

You shouldn't have much problems with the surface. The only thing I can think of is the issue of the higher resolution. Since illustrator is an older version is is lacking the features for higher resolution monitors. You may need to lower the resolution to make it easier to see and use. Other than that you should be fine.

How can I get Flash to work with my N-trig stylus on my Surface Pro 3?

Flash doesn't work at all with the N-trig stylus on the Surface Pro 3 with the latest WinTab drivers installed. The only freehand marks I can make create large useless lines that extend way beyond the lower-right corner the stage. Is Adobe aware of this?

Many people (including me) are also having the same issue. There are several other threads about this too on adobe and Microsoft websites. Some people are even having this issue with tasblets other thsn the surface pro 3, and this is COMPLETELY UNACCEPTABLE BECAUSE WE ARE PAYING MONTHLY FOR A PROGRAM THAT IS RENDERED USELESS BY THIS BUG!! I mean in almost every thread an adobe representative says the problem has been fixed internally and will be resolved with the next update, BUT WHEN IS THAT!!?? I mean if they are gonna sit here and have issues like this, they need to update them NOW not later, as we are paying EVERY MONTH and get updates like every 4-6 months. So instead of getting frequent minor and small updates to address things like this, they decide to leave us paying for a broken program for months until they're ready to release big update which will probably come with more bugs that we'll have to wait forever to get fixed all over again,
but LONG STORY SHORT:according to many adobe reps "the issue has been fixed internally and will be resolved with the next update"

Photoshop 2014 UI smaller than my other Adobe apps on Surface Pro...

I recently purchased a MS Surface Pro 3. For some reason the user interface is smaller in Photoshop than any other Adobe program. The experimental 200% UI preference makes Photoshop FAR to large. I don't know what Adobe is thinking.
All of the other Adobe app interfaces are a nice usable size. Is there any way to get the Photoshop interface to be the same size as other Adobe apps?

Is it normal for Photoshop to have smaller menus than the other Adobe products thought?
Here is a screen capture of two apps and their size comparison.

Lync 2013 & Surface Pro -- Video Cameras unusable "Can't connect to this camera"

Anyone encounter issues where you cannot use Surface Pro integrated cameras with Lync client?

Yes, encountered the same problem. You found a solution?

AirPort Time Capsule (firmware v7.7.3) has slow wifi connection to new Surface Pro 3

I got a new Surface Pro 3 i7. I have all the updates for it. I ran into a problem that many others also ran into which was very slow WiFi performance. I utilized many troubleshooting methods and sources and I am currently inclined to believe this... the new Marvell AVASTAR Wireless-AC Network Controller drivers are not compatible with my Airport Time Capsule firmware version 7.7.3.
Has anyone else experienced this?
Is there another firmware version that works (older or newer)?
Details:
I tried all kinds of things, like changing the network drivers on the SP3 to many different versions. Many of the help forums recommended using the drivers dated 4/24/2014. This did seem to help, but not reliably. What I discovered is... if I connect using the SP3 WiFi to my network extension Airport Express on version 7.6.4, I reliably get 20-22 mbps (which is the best I can expect from my network and works great for my needs). But, when I connect to my primary network Airport Time Capsule, the best I can get is 1.5 mbps, but usually between .15 and .9 mbps. It's completely unusable in today's internet environment. At the same time, I used my iPhone and the Airport Utility to verify the connections. I used SpeedTest.net on my MacBook, iPad, iPhone and Win8.1 HP laptop to verify that every other device was getting the 20+mbps. And they did. Only the Surface Pro 3 couldn't perform when using WiFi through the Airport Time Capsule. The SP3 does achieve 20+ mbps like all my other devices, but only when connected to the Airport Express.
The articles I read said that the network drivers on the SP3 seem to require the routers to be updated to the latest versions. Both the Airport Time Capsule and the Airport Express seem to be updated. When I go into their settings using the Airport Utility, there are no updates available.
Of course this problem isn't replicated at the Microsoft store since they don't have apple routers. So, their response is to upgrade the routers. Extremely unhelpful when the Apple software is saying it is upgraded already. I can't believe this new Airport Time Capsule has to be retired because it isn't playing well with others, and I love the automatic backup it is providing for my MacBook. So, somehow, I need the Airport Time Capsule to work with the new WiFi card & drivers on my SP3, just like the SP3 is working properly with the Airport Express.

Thanks for your input!
1. No downgrade. Bummer, but understandable.
2. Completely agree!!! I did too and then I had to redo it because I couldn't install a driver. I had to start all over and reinstall Win 8 then Win 8.1 over it. It was a colossal waste of time and endless frustration. If I can just get it modestly working, I'll take it. It doesn't have to be perfect right now.
3. Great suggestion! And the Microsoft forums are also a buzz. One suggestion I tried (and it seems to be working) is to set a separate wireless network name for the 5ghz band. I haven't thoroughly tested it yet, but I'm hopeful. I t seems to have worked for some, but not others. The next thing I'll try is fixing the channel, but strangely, I didn't see that option in the AirPort Utility app on my iPhone. Is it only available through Mac/PC laptop/desktop software?
4. Yup. Sigh. I actually have an old linksys. I retired it when I went 100% apple. I was hoping that things would work smoother. And they did! Until this SP3 came into my life. Arg.
And and a few more details...
the AirPort Time Capsule is 802.11ac
the AirPort Express is 802.11n (2nd gen)
I'm wondering if it is the AC connection that is the issue. Maybe since the Express always connects with n, it is OK....
Nope. Just tested the SP3 again and it is maintaining it's connection to the AirPort Time Capsule utiling the 802.11a/n/ac mode and connecting to the 5Ghz special network name. So far so good... Fingers crossed...

Brush issue on surface pro 3 (screenshot)

This is happening on my canvas when I try to draw with the pen tool. When I make a stroke, the line becomes long and straight automatically, thus make me unable to draw.
Could someone tell me why this happening?
I'm using the latest update of flash professional CC. I'm using the 64-bit surface pro 3, Intel Core i3-4020Y CPU @ 1.50GHz, 4.00 GB of RAM, using windows 8.1 pro

Hi All,
Thanks for your patience. Patch for FlashPro CC 2014 (Build No. 14.2.0.20) was released yesterday, requesting you to please update and try and let us know if you still face any issues.
You can update your Flash CC 2014 build by just going to Help>Updates or through Creative Cloud App.
You can learn more about the update at Flash Professional Help | New features summary
Rgds,
Mukesh

Type UI in CS6 in Surface Pro 3 is too small. Adobe needs to isuue a fix for CS6.

I don't need to upgrade CS6 for any photography reason. Adobe should make CS6 UI readable fro surface pro 3 users. They have a fix for later versions. Why not make it available in other earlier versions of photoshop. This is not a question of adding new features, it is a question of making the UI readable.

Mylenium wrote:
Nobody goes back to fix up a 5 year old software that was never meant to be run on computers that didn't exist back then.
However good software companies like Microsoft fixes bugs user report on their Current Software. Adobe should fix bugs on current marketed software like CS6 Adobe chooses not to. Microsoft fixed XP till the middle of 2014 years after windows 7 and win 8 were current. Bugs go unfixed in Photoshop release after release. Adobe Program support continues to be sub par year after year.
Currently there are three CS6
perpetual Mac version 13.0.6
perpetual PC version 13.0.1.3
subscription version 13.1.2 PC and Mac

Image down to a Surface Pro with Windows 8.1 Enterprise use PXE fails at Driver Pack Install

I am using SCCM 2012 SP1 running on windows server 2008 R2 deploying to windows Surface Pro, I am deploying Windows 8.1 Enterprise using PXE.
It gets the pxe response, formats the HD, deploys the image, downloads the driver package, but when it installs the driver package I get a (0xC0000135) error. When it finishes it boots to windows 8.1 but is missing it's drivers. Here is the dism.log
2014-06-10 15:49:06, Info                  DISM   PID=160 TID=1704 Scratch directory set to 'C:\_SMSTaskSequence\PkgMgrTemp\'. - CDISMManager::put_ScratchDir
2014-06-10 15:49:06, Info                  DISM   PID=160 TID=1704 DismCore.dll version: 6.2.9200.16384 - CDISMManager::FinalConstruct
2014-06-10 15:49:06, Info                  DISM   PID=160 TID=1704 Successfully loaded the ImageSession at "X:\WINDOWS\Pkgmgr" - CDISMManager::LoadLocalImageSession
2014-06-10 15:49:06, Info                  DISM   DISM Provider Store: PID=160 TID=1704 Found and Initialized the DISM Logger. - CDISMProviderStore::Internal_InitializeLogger
2014-06-10 15:49:06, Info                  DISM   DISM Provider Store: PID=160 TID=1704 Failed to get and initialize the PE Provider. Continuing by assuming
that it is not a WinPE image. - CDISMProviderStore::Final_OnConnect
2014-06-10 15:49:06, Info                  DISM   DISM Provider Store: PID=160 TID=1704 Finished initializing the Provider Map. - CDISMProviderStore::Final_OnConnect
2014-06-10 15:49:06, Info                  DISM   DISM Provider Store: PID=160 TID=1704 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
2014-06-10 15:49:06, Info                  DISM   DISM Provider Store: PID=160 TID=1704 Provider has previously been initialized. Returning the existing instance.
- CDISMProviderStore::Internal_GetProvider
2014-06-10 15:49:06, Info                  DISM   DISM Provider Store: PID=160 TID=1704 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
2014-06-10 15:49:06, Info                  DISM   DISM Provider Store: PID=160 TID=1704 Provider has previously been initialized. Returning the existing instance.
- CDISMProviderStore::Internal_GetProvider
2014-06-10 15:49:06, Info                  DISM   DISM Manager: PID=160 TID=1704 Successfully created the local image session and provider store. - CDISMManager::CreateLocalImageSession
2014-06-10 15:49:06, Info                  DISM   DISM Provider Store: PID=160 TID=1704 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
2014-06-10 15:49:06, Info                  DISM   DISM Provider Store: PID=160 TID=1704 Provider has previously been initialized. Returning the existing instance.
- CDISMProviderStore::Internal_GetProvider
2014-06-10 15:49:06, Info                  DISM   DISM.EXE:
2014-06-10 15:49:06, Info                  DISM   DISM.EXE: <----- Starting Dism.exe session ----->
2014-06-10 15:49:06, Info                  DISM   DISM.EXE:
2014-06-10 15:49:06, Info                  DISM   DISM.EXE: Host machine information: OS Version=6.2.9200, Running architecture=amd64, Number of processors=4
2014-06-10 15:49:06, Info                  DISM   DISM.EXE: Dism.exe version: 6.2.9200.16384
2014-06-10 15:49:06, Info                  DISM   DISM.EXE: Executing command line: "X:\WINDOWS\Pkgmgr\dism.exe" /image:"C:" /windir:"Windows"
/apply-unattend:"C:\_SMSTaskSequence\PkgMgrTemp\drivers.xml" /logpath:"C:\_SMSTaskSequence\PkgMgrTemp\dism.log"
2014-06-10 15:49:06, Info                  DISM   DISM Provider Store: PID=160 TID=1704 Getting the collection of providers from a local provider store type. - CDISMProviderStore::GetProviderCollection
2014-06-10 15:49:06, Info                  DISM   DISM Provider Store: PID=160 TID=1704 Provider has not previously been encountered. Attempting to initialize
the provider. - CDISMProviderStore::Internal_GetProvider
2014-06-10 15:49:06, Info                  DISM   DISM Provider Store: PID=160 TID=1704 Loading Provider from location X:\WINDOWS\Pkgmgr\FolderProvider.dll - CDISMProviderStore::Internal_GetProvider
2014-06-10 15:49:06, Info                  DISM   DISM Provider Store: PID=160 TID=1704 Connecting to the provider located at X:\WINDOWS\Pkgmgr\FolderProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2014-06-10 15:49:06, Info                  DISM   DISM Provider Store: PID=160 TID=1704 Provider has not previously been encountered. Attempting to initialize
the provider. - CDISMProviderStore::Internal_GetProvider
2014-06-10 15:49:06, Info                  DISM   DISM Provider Store: PID=160 TID=1704 Loading Provider from location X:\WINDOWS\Pkgmgr\WimProvider.dll - CDISMProviderStore::Internal_GetProvider
2014-06-10 15:49:06, Info                  DISM   DISM Provider Store: PID=160 TID=1704 Connecting to the provider located at X:\WINDOWS\Pkgmgr\WimProvider.dll. -
CDISMProviderStore::Internal_LoadProvider
2014-06-10 15:49:06, Info                  DISM   DISM Provider Store: PID=160 TID=1704 Provider has not previously been encountered. Attempting to initialize
the provider. - CDISMProviderStore::Internal_GetProvider
2014-06-10 15:49:06, Info                  DISM   DISM Provider Store: PID=160 TID=1704 Loading Provider from location X:\WINDOWS\Pkgmgr\VHDProvider.dll - CDISMProviderStore::Internal_GetProvider
2014-06-10 15:49:06, Info                  DISM   DISM Provider Store: PID=160 TID=1704 Connecting to the provider located at X:\WINDOWS\Pkgmgr\VHDProvider.dll. -
CDISMProviderStore::Internal_LoadProvider
2014-06-10 15:49:06, Info                  DISM   DISM Provider Store: PID=160 TID=1704 Provider has not previously been encountered. Attempting to initialize
the provider. - CDISMProviderStore::Internal_GetProvider
2014-06-10 15:49:06, Info                  DISM   DISM Provider Store: PID=160 TID=1704 Loading Provider from location X:\WINDOWS\Pkgmgr\ImagingProvider.dll - CDISMProviderStore::Internal_GetProvider
2014-06-10 15:49:06, Info                  DISM   DISM Provider Store: PID=160 TID=1704 Connecting to the provider located at X:\WINDOWS\Pkgmgr\ImagingProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2014-06-10 15:49:06, Info                  DISM   DISM Provider Store: PID=160 TID=1704 Provider has not previously been encountered. Attempting to initialize
the provider. - CDISMProviderStore::Internal_GetProvider
2014-06-10 15:49:06, Info                  DISM   DISM Provider Store: PID=160 TID=1704 Loading Provider from location X:\WINDOWS\Pkgmgr\CompatProvider.dll - CDISMProviderStore::Internal_GetProvider
2014-06-10 15:49:06, Info                  DISM   DISM Provider Store: PID=160 TID=1704 Connecting to the provider located at X:\WINDOWS\Pkgmgr\CompatProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2014-06-10 15:49:06, Info                  DISM   DISM.EXE: Got the collection of providers. Now enumerating them to build the command table.
2014-06-10 15:49:06, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: DISM Log Provider
2014-06-10 15:49:06, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: FolderManager
2014-06-10 15:49:06, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: WimManager
2014-06-10 15:49:06, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: WimManager.
2014-06-10 15:49:06, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: VHDManager
2014-06-10 15:49:06, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: GenericImagingManager
2014-06-10 15:49:06, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: GenericImagingManager.
2014-06-10 15:49:06, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: Compatibility Manager
2014-06-10 15:49:06, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: Compatibility Manager.
2014-06-10 15:49:06, Info                  DISM   DISM Provider Store: PID=160 TID=1704 Getting the collection of providers from a local provider store type. - CDISMProviderStore::GetProviderCollection
[160] [0x80070002] FIOReadFileIntoBuffer:(1415): The system cannot find the file specified.
[160] [0xc142011c] UnmarshallImageHandleFromDirectory:(511)
[160] [0xc142011c] WIMGetMountedImageHandle:(2568)
2014-06-10 15:49:06, Info                  DISM   DISM WIM Provider: PID=160 TID=1704 [C:\] is not a WIM mount point. - CWimMountedImageInfo::Initialize
2014-06-10 15:49:06, Info                  DISM   DISM VHD Provider: PID=160 TID=1704 [C:\] is not recognized by the DISM VHD provider. - CVhdImage::Initialize
2014-06-10 15:49:06, Info                  DISM   DISM Provider Store: PID=160 TID=1704 Getting Provider VHDManager - CDISMProviderStore::GetProvider
2014-06-10 15:49:06, Info                  DISM   DISM Provider Store: PID=160 TID=1704 Provider has previously been initialized. Returning the existing instance.
- CDISMProviderStore::Internal_GetProvider
2014-06-10 15:49:06, Info                  DISM   DISM VHD Provider: PID=160 TID=1704 [C:\] is not recognized by the DISM VHD provider. - CVhdImage::Initialize
2014-06-10 15:49:06, Info                  DISM   DISM Imaging Provider: PID=160 TID=1704 The provider VHDManager does not support CreateDismImage on C:\ - CGenericImagingManager::CreateDismImage
2014-06-10 15:49:06, Info                  DISM   DISM Provider Store: PID=160 TID=1704 Getting Provider WimManager - CDISMProviderStore::GetProvider
2014-06-10 15:49:06, Info                  DISM   DISM Provider Store: PID=160 TID=1704 Provider has previously been initialized. Returning the existing instance.
- CDISMProviderStore::Internal_GetProvider
[160] [0x80070002] FIOReadFileIntoBuffer:(1415): The system cannot find the file specified.
[160] [0xc142011c] UnmarshallImageHandleFromDirectory:(511)
[160] [0xc142011c] WIMGetMountedImageHandle:(2568)
2014-06-10 15:49:06, Info                  DISM   DISM WIM Provider: PID=160 TID=1704 [C:\] is not a WIM mount point. - CWimMountedImageInfo::Initialize
2014-06-10 15:49:06, Info                  DISM   DISM Imaging Provider: PID=160 TID=1704 The provider WimManager does not support CreateDismImage on C:\ - CGenericImagingManager::CreateDismImage
2014-06-10 15:49:06, Info                  DISM   DISM Imaging Provider: PID=160 TID=1704 No imaging provider supported CreateDismImage for this path - CGenericImagingManager::CreateDismImage
2014-06-10 15:49:06, Info                  DISM   DISM Manager: PID=160 TID=1704 physical location path: C:\ - CDISMManager::CreateImageSession
2014-06-10 15:49:06, Info                  DISM   DISM Manager: PID=160 TID=1704 Copying DISM from "C:\Windows\System32\Dism" - CDISMManager::CreateImageSessionFromLocation
2014-06-10 15:50:07, Error                 DISM   DismHostLib: Failed to create DismHostManager remote object. Checking for dismhost.exe exit code.
2014-06-10 15:50:07, Info                  DISM   DismHostLib: Found dismhost.exe exit code.
2014-06-10 15:50:07, Error                 DISM   DISM Manager: PID=160 TID=1704 Failed to create Dism Image Session in host. - CDISMManager::LoadRemoteImageSession(hr:0xc0000135)
2014-06-10 15:50:07, Warning               DISM   DISM Manager: PID=160 TID=1704 A problem ocurred loading the image session. Retrying... - CDISMManager::CreateImageSession(hr:0xc0000135)
2014-06-10 15:50:07, Info                  DISM   DISM Manager: PID=160 TID=1704 Copying DISM from "C:\Windows\System32\Dism" - CDISMManager::CreateImageSessionFromLocation
2014-06-10 15:51:08, Error                 DISM   DismHostLib: Failed to create DismHostManager remote object. Checking for dismhost.exe exit code.
2014-06-10 15:51:08, Info                  DISM   DismHostLib: Found dismhost.exe exit code.
2014-06-10 15:51:08, Error                 DISM   DISM Manager: PID=160 TID=1704 Failed to create Dism Image Session in host. - CDISMManager::LoadRemoteImageSession(hr:0xc0000135)
2014-06-10 15:51:08, Error                 DISM   DISM Manager: PID=160 TID=1704 Failed to load the image session from the temporary location: C:\_SMSTaskSequence\PkgMgrTemp\82E1FB72-A2BA-4355-B95D-2AC1A905B6D4
- CDISMManager::CreateImageSession(hr:0xc0000135)
2014-06-10 15:51:08, Error                 DISM   DISM.EXE: Could not load the image session. HRESULT=C0000135
2014-06-10 15:51:08, Error                 DISM   DISM.EXE: Unable to start the servicing process for the image at 'C:\'. HRESULT=C0000135
2014-06-10 15:51:08, Info                  DISM   DISM.EXE: Image session has been closed. Reboot required=no.
2014-06-10 15:51:08, Info                  DISM   DISM.EXE:
2014-06-10 15:51:08, Info                  DISM   DISM.EXE: <----- Ending Dism.exe session ----->
2014-06-10 15:51:08, Info                  DISM   DISM.EXE:
2014-06-10 15:51:08, Info                  DISM   DISM Provider Store: PID=160 TID=1704 Found the OSServices. Waiting to finalize it until all other providers
are unloaded. - CDISMProviderStore::Final_OnDisconnect
2014-06-10 15:51:08, Info                  DISM   DISM Provider Store: PID=160 TID=1704 Disconnecting Provider: FolderManager - CDISMProviderStore::Internal_DisconnectProvider
2014-06-10 15:51:08, Info                  DISM   DISM Provider Store: PID=160 TID=1704 Disconnecting Provider: WimManager - CDISMProviderStore::Internal_DisconnectProvider
2014-06-10 15:51:08, Info                  DISM   DISM Provider Store: PID=160 TID=1704 Disconnecting Provider: VHDManager - CDISMProviderStore::Internal_DisconnectProvider
2014-06-10 15:51:08, Info                  DISM   DISM Provider Store: PID=160 TID=1704 Disconnecting Provider: GenericImagingManager - CDISMProviderStore::Internal_DisconnectProvider
2014-06-10 15:51:08, Info                  DISM   DISM Provider Store: PID=160 TID=1704 Disconnecting Provider: Compatibility Manager - CDISMProviderStore::Internal_DisconnectProvider
2014-06-10 15:51:08, Info                  DISM   DISM Provider Store: PID=160 TID=1704 Releasing the local reference to DISMLogger. Stop logging. - CDISMProviderStore::Internal_DisconnectProvider

Hi,
This might cause the newer version .wim cannot be modified by the lower version dism.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Using a Surface Pro 2 to Sign PDF's?

I'm a Realtor and when I create new documents for a transacton they come from Zip Forms in PDF format.
I have been trying to figure out a way to be able to sign these PDF's on a tablet. Current in Acrobat reader I can use the pen selection in the options but there is no way to control the "point" of the pen and it essentially looks like a really FAT marker in the signature areas, pretty much unuseable.
I've tried a Galaxy Note 10.1 2014 Edition, found the same problem.
If I use Acrobat Pro instead (and thus paying for acrobat then), would that give me the option to do this?
Or, should I use something like the Surface Pro 2 instead with normal acrobat (shopping for a tablet now anyway)?
Or would I need BOTH for that to work?
I figure there has got to be a way to do on screen signatures in Acrobat on PDF's...I cannot possibly be the only person wanting to do this?
Thanks!

This forum is actually about the Cloud, not about using individual programs
Once your program downloads and installs with no errors, you need the program forum
If you start at the Forums Index http://forums.adobe.com/index.jspa
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says ALL FORUMS) to open the drop down list and scroll

Flash CC 2014 unusable on Surface Pro

Similar Messages

Maybe you are looking for