Flash CC 2014 Update broke streaming audio in timeline

Is it just me? it used to be that when you started a streaming audio file in frame 1 and when to frame 400 and hit enter to start preview, it would start the audio from frame 400. now it starts over from frame 0. this make animation cueing especially with a soundtrack a complete mess. virtually impossible to sync by sound now. especially when the soundtrack has a consistent waveform and you can't determine where peaks of instruments are.

Hi,
Do you see this issue consistently across files or on a specific file? If it is specific to a file can you please share the content? Also please post your machine configurations.
Thanks!
Mohan

Similar Messages

Is Flash Server required to incrementally "stream" audio?

I need the ability to jump forward through an mp3 file
without downloading
the entire file.
Do I need Flash Server to do this?
Thank you

"David Stiller" <[email protected]> wrote in
message
news:ggjt48$29r$[email protected]..
> Tim,
>
>> I need the ability to jump forward through an mp3
file without
>> downloading the entire file.
>> Do I need Flash Server to do this?
>
> Yes. Flash Media Server gives you RTMP, which is the
protocol you need
> for that sort of streaming. Without FMS, you're using
HTTP -- the same
> protocol the browser uses to download HTML, JGPs, CSS
files, and nearly
> everything else.
>
>
> David Stiller
> Adobe Community Expert
> Dev blog,
http://www.quip.net/blog/
> "Luck is the residue of good design."
>
Thank you. It would be nice if a watered down version of
Flash Server
existed for people who only need to incrementally stream
audio.

Streamed audio stuttering since update to Yosemite

I have a big problem with stuttering streamed audio and video (Spotify, Deezer, Netflix etc) since I updated to Yosemite. It seems to get much worse when the stream in question is not the "active" thing on my screen. For example when the screen goes black due to standby mode when listening to Spotify or when surfing on one tab while listening on Deezer on another. Also, while watching Netflix on another screen with the laptop lid closed, it doesn't take long before the audio and video becomes off sync. Does anyone else have this problem or have any idea on a solution?
I have a Macbook air 13" mid 2012 and 100 mbit connection. I completely erased the hard drive before installing OS X Yosemite.

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.apple.AirPortBaseStationAgent com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.SafariNotificationAgent com.apple.usbmuxd com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper ' ' 879294308 3627668074 1083382502 1274181950 1855907737 464843899 1233118628 2456546649 2636415542 842973933 3301885676 891055588 998894468 695903914 1443423563 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { split("'"${p[41]}"'",b);for(i in b) print b[i];if(n<10) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { split("'"${p[41]}"'",b);for(i in b) print b[i]".plist";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;' ' /:/d;/\./p;' '/\.appex\/Contents\/Info\.plist$/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:|suhel| VALI|ver-r|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" 'L*/P*/com.ap*.p*.ext*.*.*t -exec '"${c1[14]}"' :displayOrder" {} \;' );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors appexes );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 4 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

FireFox/Flash update, now streaming Flash/FLV videos do not play

After upgrading to FireFox 13 and Flash, my FireFox no longer plays Flash/FLV or YouTube videos. Spending countless hours installing, reinstalling, searching on the web for resolution, I have to say that I may finally switching to a different browser. This is totally an inexcusable bug either on Mozilla's or Adobe's part. Streaming YouTube or any kind of online video is a must, without it, it's like the internet without search engines.
I develop under 5 other browsers and all the other ones are playing the online videos without a hitch so I'm guessing it's not completely Adobe's error in this issue. Before anyone tries to send me the "try this.." I've tried them all....
1. clear cache, cookies
2. re-installled firefox 3.6.xx, 13 and even the beta 14 versions
3. re-installed shockwave and flash plugins
4. disabled all addons and plugins, starting in safe mode.
5. turned off hardware acceleration in flash settings
* I've pretty much given up, good thing I installed IE Plus so that I can actually run a tab in IE engine and that pulled up the video right away.... what's the point, might as well just use IE.
Too bad, FireFox was "THE" browser, seems to me every new version that comes out from Mozilla, it gets buggier and buggier. This time I have to say, it's a doosie.
Hope everyone is having better luck then me.
Damen

This may be caused by a recent Flash 11.3 update.
See:
*https://support.mozilla.org/kb/keep-flash-up-to-date-and-troubleshoot-problems
*https://support.mozilla.org/kb/flash-crashes-or-does-not-load-firefox-13
*http://forums.adobe.com/thread/1018071?tstart=0
*http://blogs.adobe.com/asset/2012/06/inside-flash-player-protected-mode-for-firefox.html

Live streaming audio on flash site

Hello,
I am new to Flash and I am working on a web page using flash, the page itself is going to be pretty basic, but the situation I am in is this, we would like to but a live streaming audio feed on the site and I am having trouble figuring out how to add that. The server it is from is a Broadwave server, and it does stream in MP3. I would like the audio stream to start automatically when the web page is open. Any help would be greatly appriciated.

You could build your own player but if you are new to Flash, you might want to just embed or place on the Web page a prebuilt player. For example:
http://www.longtailvideo.com/players/jw-flv-player/
or
http://flowplayer.org/
or
http://ffmp3.sourceforge.net/
each player will have it's own config setup for autoplay etc.
Best wishes,
Adninjastrator

Conexant audio update broke wireless adapter driver

Installed the recommended driver update for conexant audio (windows 7). Immediately upon restart the wireless network adapter card stopped functioning. No other updates or changes were made, and this was a direct result of this driver breaking the other driver. Could not get the wireless adapter driver to fix, had to do a system restore because even uninstalling the conexant driver did not fix the wireless driver.
Bad update!

Hi, Please try driver from the following link (the first one): http://h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=6732463&swLangOid=8&swEnvOid=4063 Regards.

Streaming audio not working

Streaming audio from radio stations not working since 7/11/2014.
Adobe flash player update stalls during installation.
MacBook Pro
OSX 10.9.4
Safari Version 7.0.5 (9537.77.4)

What version do you see for Flash in System Preferences > Flash > Advanced

Streaming audio (radio stations)

Is it possible to access streaming audio via radio staion web sites on my Curve?

Just to be sure: which Firefox version are you using?
You may have a corrupted user agent that identifies you as Firefox/3.6.17
*Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.17) Gecko/20110420 Firefox/3.6.17 (.NET CLR 3.5.30729) FBSMTWB
See:
*https://support.mozilla.org/kb/Finding+your+Firefox+version
*https://support.mozilla.org/kb/websites-say-firefox-outdated-or-incompatible
*http://kb.mozillazine.org/Resetting_your_useragent_string_to_its_compiled-in_default
If you really use a Firefox/3.6.17 version then you should update to the latest Firefox 16.0.2 version.
*https://support.mozilla.org/kb/update-firefox-latest-version
It is important to update Firefox and add-ons to the latest versions to get the latest bug fixes and security updates.
Also note that the latest Flash plugin for Firefox 3.6 is Flash 10.3 and that your Flash 11.4 version is not officially supported for Firefox 3.6 (Mozilla Firefox 4.0 or later)
*http://www.adobe.com/products/flashplayer/tech-specs.html

IOS RTMP live stream audio

Hi guys hopefully some of you will be able to help me.
I am trying to stream audio from a live RTMP feed using the NetConnection and NetStream classes. I've managed to get my app running no problem on Android, however I am having some major difficulties getting it to play the audio back on iPad. Interestingly it works in the device emulators when debugging, however I'm assuming this is not really an accurate representation. I've tried streaming the RTMP in both AAC and MP3, but with no luck from either. I can verify through debug that it has connected to the stream, however I just get no audio playing.
Everything I've read about seems to suggest that this is possible on IOS as I'm only interested in audio and not video. Can anyone help?
Code sample below (it's quick and dirty! ).
THanks in advance!
<?xml version="1.0" encoding="utf-8"?>
<s:View xmlns:fx="http://ns.adobe.com/mxml/2009"
                    xmlns:s="library://ns.adobe.com/flex/spark" title="Audio" creationComplete="init()">
          <s:layout>
                    <s:VerticalLayout paddingLeft="10" paddingRight="10"
                                                              paddingTop="10" paddingBottom="10"/>
          </s:layout>
          <fx:Script>
                    <![CDATA[
                              import flash.media.Video;
                              import flash.net.NetConnection;
                              import flash.net.NetStream;
                              import mx.core.UIComponent;
                              private var vid:Video;
                              private var videoHolder:UIComponent;
                              private var nc:NetConnection;
                              private var defaultURL:String="[STREAM]";
                              private var streamName:String="[STREAMNAME]";
                              private var ns:NetStream;
                              private var msg:Boolean;
                              private var intervalMonitorBufferLengthEverySecond:uint;
                              private function init():void
                                        vid=new Video();
                                        vid.width=864;
                                        vid.height=576;
                                        vid.smoothing = true;
                                        //Attach the video to the stage
                                        videoHolder = new UIComponent();
                                        videoHolder.addChild(vid);
                                        addEventListener(SecurityErrorEvent.SECURITY_ERROR, onSecurityError);
                                        grpVideo.addElement(videoHolder);
                                        connect();
                              public function onSecurityError(e:SecurityError):void
                                        trace("Security error: ");
                              public function connect():void
                                        nc = new NetConnection();
                                        nc.client = this;
                                        nc.addEventListener(NetStatusEvent.NET_STATUS, netStatusHandler);
                                        nc.objectEncoding = flash.net.ObjectEncoding.AMF0;
                                        nc.connect(defaultURL);
                              public function netStatusHandler(e:NetStatusEvent):void
                                        switch (e.info.code) {
                                                  case "NetConnection.Connect.Success":
                                                            trace("audio - Connected successfully");
                                                            createNS();
                                                            break;
                                                  case "NetConnection.Connect.Closed":
                                                            trace("audio - Connection closed");
                                                            //connect();
                                                            break;
                                                  case "NetConnection.Connect.Failed":
                                                            trace("audio - Connection failed");
                                                            break;
                                                  case "NetConnection.Connect.Rejected":
                                                            trace("audio - Connection rejected");
                                                            break;
                                                  case "NetConnection.Connect.AppShutdown":
                                                            trace("audio - App shutdown");
                                                            break;
                                                  case "NetConnection.Connect.InvalidApp":
                                                            trace("audio - Connection invalid app");
                                                            break;
                                                  default:
                                                            trace("audio - " + e.info.code + "-" + e.info.description);
                                                            break;
                              public function createNS():void
                                        trace("Creating NetStream");
                                        ns=new NetStream(nc);
                                        //nc.call("FCSubscribe", null, "live_production"); // Only use this if your CDN requires it
                                        ns.addEventListener(NetStatusEvent.NET_STATUS, netStreamStatusHandler);
                                        vid.attachNetStream(ns);
                                        //Handle onMetaData and onCuePoint event callbacks: solution at http://tinyurl.com/mkadas
                                        //See another solution at http://www.adobe.com/devnet/flash/quickstart/metadata_cue_points/
                                        var infoClient:Object = new Object();
                                        infoClient.onMetaData = function oMD():void {};
                                        infoClient.onCuePoint = function oCP():void {};
                                        ns.client = infoClient;
                                        ns.bufferTime = 0;
                                        ns.play(streamName);
                                        ns.addEventListener(AsyncErrorEvent.ASYNC_ERROR, asyncErrorHandler);
                                        function asyncErrorHandler(event:AsyncErrorEvent):void {
                                                  trace(event.text);
                                        intervalMonitorBufferLengthEverySecond = setInterval(monPlayback, 1000);
                              public function netStreamStatusHandler(e:NetStatusEvent):void
                                        switch (e.info.code) {
                                                  case "NetStream.Buffer.Empty":
                                                            trace("audio - Buffer empty: ");
                                                            break;
                                                  case "NetStream.Buffer.Full":
                                                            trace("audio - Buffer full:");
                                                            break;
                                                  case "NetStream.Play.Start":
                                                            trace("audio - Play start:");
                                                            break;
                                                  default:
                                                            trace("audio - " + e.info.code + "-" + e.info.description);
                                                            break;
                              public function monPlayback():void {
                                        // Print current buffer length
                                        trace("audio - Buffer length: " + ns.bufferLength);
                                        trace("audio - FPS: " + ns.currentFPS);
                                        trace("audio - Live delay: " + ns.liveDelay);
                              public function onBWDone():void {
                                        //Do nothing
                              public function onFCSubscribe(info:Object):void {
                                        // Do nothing. Prevents error if connecting to CDN.
                              public function onFCUnsubscribe(info:Object):void {
                                        // Do nothing. Prevents error if connecting to CDN.
                    ]]>
          </fx:Script>
          <s:Group id="grpVideo">
          </s:Group>
</s:View>

Just an update on this for anyone coming along after me.
I've managed to get this working on MP3 but not AAC (I guess AAC just isn't supported?).
My problem was the buffertime. The docs seemed to indicate it shoudl be set to 0 for live streaming, however switching it to "1" solved my problem on the particular stream I was pointing at.
So essentially justchanged the above line:
                                        ns.bufferTime = 0;
to
                                        ns.bufferTime = 1;
Would be great to find out if anyone has gotten AAC working however...

Facebook and streaming audio issues

I like using Facebook and stream audio from my favorite radio stations! However, I am running into adobe flash upgrade issues!!!! I can bring up Facebook but I can't run certain programs within it. I can bring up my favorite radio stations but won't let me stream audio!!!! Any solutions?

What exactly are your issues?
I had an issue where every image found on the blog template was showing up instead of the actual image that represented the blog post. My fix was to make sure of the following:
1. Blog image needs to be small in file size. Many bloggers post images that came straight off their camera and I found that the share tools will grab the most accessbile and light-weight files first. If the image is too big then it won't grab it at all. The share tool grabs the smallest and fastest loading, top-most in the code image first, which means the images found on the template of the blog.
This issue occurs at WordPress too, so it is not restricted to BC but rather the tools provided to share.
2. Try to avoid putting the image inbetween <p></p>'s, when I pulled mine out of the the paragraph format, they were found quicker.
3. Avoid having the image lead off the blog post list before the bodypreview, if you can at all just show the image on within post detail page if you can. I know that having an image in the list helps, but then just put the whole blog in the list, like WP does. Problem here is that most share tools on the list have a problem diciphering what to share, so it shares the whole page, giving everthing a share count. WP does this better. They isolate the independent listings and provide isolated share tools for each list.
Wait a week and the technology will change again.
Good news is that the element that Facebook offers to share a page on the web will be featuring the option to upload an image to accompanying the sharing of the post. You can see this happening at Facebook already when you drop in the link of the post into a news feed.
I hope this helps.

Streaming audio apps don't work after 10.1

Since updating my Z10 and my wife's Z10 to 10.1 on Telus none of the streaming audio apps work over LTE or HSPA+. Songza, 8tracks, slacker and nobex all stop playing music after a couple of minutes unless I tell them to play again. Help please.
Solved!
Go to Solution.

is your Z10 SIM-locked? If no, can you try with a SIM card not from Telus?
Maybe you can also give Telus a call and ask them about the streaming. Do they allow it?
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

How to stream audio in Windows Phone 8.1?

I have a Windows Phone Silverlight 8.0 app I want to update to 8.1 using WinRT. It streams audio in the background. In Silverlight, I used
BackgroundAudioPlayer to set the Track to a Uri. It's not clear how to do this with
MediaPlayer in WinRT. I don't think I can just use a Uri. Instead, I wonder if I have to use
MediaPlayer.SetStreamSource(IRandomAccessStream
stream). If so, I don't know how to get an IRandomAccessStream from a
Uri. I want to stream from a Uri on the internet over HTTP, not from a local file. Any help?

Refer following links to stream audio in background in Windows Phone 8.1 Runtime app.
https://code.msdn.microsoft.com/windowsapps/Background-Audio-in-WinRT-344bcf4d
http://blogs.msdn.com/b/johnkenn/archive/2013/12/31/supporting-background-audio-in-your-windows-8-1-app.aspx
Thank you for thinking about my problem. I may be mistaken, but I think the above links refer to Windows 8 apps, not Windows
Phone 8.1 apps. I'm under the impression that background audio is done differently in Windows Phone 8.1 from Windows 8. The
Background Audio Overview for Windows Phone Store apps explains more.
It's a good overview, but does not explain how to play audio from a stream rather than a file. That's what I'm stuck on.

Impossible to launch Flash CC 2014 - and worst CC experience ever

Hello,
Let me explain the process here :
I launched Flash CC (not 2014), which I haven't launched since a long time. Then I opened a new AS3 document. And tried to use the brush tool. I selected a brush size. And then it crashed. Yes only that...
Adobe displays a message after crashing saying that they have a solution for this problem of crashing. Cool I think ! I click on the link, but arrive on the new creative cloud 2014 apps.A bit disappointing, but I think that the problem is resolved with Flash CC 2014.
So I download Flash CC 2014. And launch it. And it crashes.... Ok maybe it is a bad install. I restart the computer.
But then Creative Cloud asks to install the new CC Desktop app. F***. It begins to be a bit long to just use Flash !!... (Ok, I can use Flash at this point, but I need to synchronize my files, so I need CC desktop app. Anyway, I don't understand why I should download the latest version as the version I use works great : synchs my file, install fonts, and install softwares, which is the basics I need from Creative Cloud)
Ok I start to reinstall CC Desktop. But it fails !!! Yes F******** !! Error 43. "contact the consumer service". Ok I click. And I arrive on the Creative Cloud Help. BUT WHERE IS THE MESSAGE FIELD I NEED TO SPEAK TO ADOBE ???? OR THE TEL NUMBER OR WHATEVER ??? Where is the consumer service ??? Nothing ! I have to search inside all these forum links and help and find the good link to contact Adobe. WHAT A MESS ! But Adobe is not available. We are friday. I have to wait until monday. But I CAN'T !!!
Yes. Let's calm down a bit. I uninstall CC app. Restart. Redownload CC desktop app. Ok, but where is it on the Adobe website ?????? There are all apps visible everywhere (photoshop, illustrator...) but NO CC desktop APP !! I end up finding it somewhere (i don't remember where), and reinstall it. IT WOOORKS !! youhou. I notice that this new version doesn't do much more than the previous one : synchs files, install fonts, and install softwares. Oh, ok, I can go to the marketplace ! Ok, but, is it an essential feature ? I don't think so... I could have lived with the previous version and save some useful time !...
Ok but but but but.... CC app redownloads ALL my creative cloud files (3 GO) although my folder is already there in my computer, all at the latest updates !! Nevermind... I'll wait. It is already 1 hour I'm fighting with Adobe. So I can go on wasting my time with PLEASURE !!
Ok. Pfiou. Maybe Flash is working now ? Why ? Why not ? But no... Still not working... But there is a message from adobe saying they have a solution for this specific bug. Ok I click on the link. I arrive on "adobe.com". What a joke it is...
So I need a solution, please. How can I do to make Flash CC and Flash CC 2014 work on my MacbookPro 2010, with Mavericks 10.9.3 ?
Thanks
These steps are to describe how BAD the experience is with Creative Cloud at this moment, especially for the support feature. Please make it better. Really better !
And please resolve my problem with Flash CC 2014, which is the first aim of this post. It seems like there are a lot of cool features I don't need but would be pleased to test. The best would be to be able to open the software of course...

Hi Alesclandre,
I apologize for the frustrating experience. Can you send me your Adobe ID, location, and contact details (phone, email ID) over a private message? Click my picture and use the message option.
Thanks,
Preran

After updating to new 2014 updates Lightroom would not go from 'library' to Develop - screen was greyed out with the message saying:- Please renew your membership to reinstate the develop module. My membership is up to date. I then uninstalls Lightroom an

After updating from CC to new 2014 updates Lightroom would not go from 'Library' to 'Develop' - develop screen was greyed out showing the message 'Develop module is disabled. Please renew your membership to reactivate the Develop module.' Since my membership is fully up to date. I then uninstalled Lightroom 5 and then installed it again. Now when I try to open Lightroom 5 its LOGO flashes onto the screen and then 'crashes' in an instant. Please fix.

Hi brooks45,
Please try the steps mentioned in the KB Doc : http://helpx.adobe.com/lightroom/kb/unable-launch-lightroom-55.html
Regards,
Rave

Flash CC 2014 14.1.0.96 Crashing on attempt to debug in iOS Simulator

Just like the title says, Flash CC 2014 14.1.0.96 is completely crashing every time I try and debug my project in the iOS simulator via the Debug > Debug Movie > On iOS Simulator command. I have XCode version 6.1 installed. The simulator never opens - Flash crashes while the "Publishing..." progress bar is showing, after about 5 seconds.
I've tried the following iOS Simulator SDK paths in the Air 14.0 for iOS Publish settings:
/Applications/Xcode.app/Contents/Developer/Platforms/iPhoneSimulator.platform/Developer/SD Ks/iPhoneSimulator.sdk/
and
/Applications/Xcode.app/Contents/Developer/Platforms/iPhoneSimulator.platform/Developer/SD Ks/iPhoneSimulator8.1.sdk/
But both cause Flash CC 2014 to crash completely.
I should note that Publishing directly to my iPad works properly. Flash only crashes when trying to debug in the simulator.
The crash generates a rather lengthy error report. Here's the top part of it:
Process:               Adobe Flash CC 2014 [18187]
Path:                  /Applications/Adobe Flash CC 2014/Adobe Flash CC 2014.app/Contents/MacOS/Adobe Flash CC 2014
Identifier:            com.adobe.Adobe Flash CC 2014.application
Version:               14.1.0 (14.1.0.96)
Code Type:             X86-64 (Native)
Parent Process:        ??? [1]
Responsible:           Adobe Flash CC 2014 [18187]
User ID:               501
Date/Time:             2014-10-30 19:27:03.689 -0400
OS Version:            Mac OS X 10.10 (14A389)
Report Version:        11
Anonymous UUID:        D572A920-72C5-3A81-FC6C-5190EEE5CC54
Sleep/Wake UUID:       3AAEBF78-CC4E-4B94-8C18-DB6F9F2C1915
Time Awake Since Boot: 620000 seconds
Time Since Wake:       330000 seconds
Crashed Thread:        37
Exception Type:        EXC_CRASH (SIGABRT)
Exception Codes:       0x0000000000000000, 0x0000000000000000
Application Specific Information:
Performing @selector(dispatchMenuSelection:) from sender DVAMacMenuItem 0x6080000eaa80
[18187] stack overflow
If you'd like the full version let me know.
Please help! Being able to test in the simulator will improve my life exponentially.
Thanks

Hi All,
Thanks for your patience. All the issues related to iOS simulator, XCode 6.x have been fixed in latest release of FlashPro CC 2014 (Build No. 14.2.0.20) which was released yesterday.
Requesting you to please update and try and let us know if you still face any issues.
You can update your Flash CC 2014 build by just going to Help>Updates or through Creative Cloud App.
You can learn more about the update at Flash Professional Help | New features summary
Rgds,
Mukesh

Flash CC 2014 Update broke streaming audio in timeline

Similar Messages

Maybe you are looking for