Flash CC can't see my iPad device

I'm running the latest Flash CC with Air 3.9x. When I plug my 3rd gen iPad (iOS 6) in via USB, iTunes sees it immediately, but it never registers under Install Application on Connected iOS Device, no matter how many times I hit refresh.
What's going on? How can I get my device to show up? I can't seem to find any documentation on such a situation.
PS: I've successfully deployed to this device many times using FlashBuilder. This is my first time attempting to use Flash CC as my workflow.

I had similar problems connecting my android tablet to cs5.5
(This was on Windows7)
The solution was finding an alternative (not native) driver for my tablet.
Only then Flash would accept connection from the tablet.
https://groups.google.com/forum/#!forum/ios-driver
It could also be possible that with some new ios update, apple prevents developing per default.
In newer android versions you had to explicitely allow the device to be used for dev-purposes.

Similar Messages

I have activated iCloud on iPad2 and iPhone4S (both on iOS 7) using the same Apple ID and signed into 'Find my iPhone' still my iphone is not visible in my devices. I can only see my iPad.

I have activated iCloud on iPad2 and iPhone4S (both on iOS 7) using the same Apple ID and signed into 'Find my iPhone' still my iphone is not visible in my devices. I can only see my iPad.

On your iPhone, try toggling Find My iPhone off, then back on after a few seconds.

I have the newest version of the iPad and can not see it under devices in my iTunes account on my PC. I can however see my iPod touch under devices and sync it. How can I get my iPad to show under devices and sync as well?

I have the newest version of the iPad and can not see it under devices in my iTunes account on my PC. I can however see my iPod touch under devices and sync it. How can I get my iPad to show under devices and sync as well? I have also tried may suggestions on the apple support site and none have worked. Any suggestions are welcome.

You need iTunes version 11+.
iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
How to restart the Apple Mobile Device Service (AMDS) on Windows
http://support.apple.com/kb/TS1567
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
 Cheers, Tom

How can I see my ipad on itunes after cut the restore?

I was restoring my ipad then I accidently closed the itunes by Task Manager and now I can't see my ipad in itunes or any similar program but when I plug my ipad to the PC I can hear the alert means it's plugged , and I can see it in Device Manager , and I can't put it in DFU mode or anything else because I have no screen or home&power button.
sorry for my English.
t

Hello moamal,
Welcome to the Apple Support Communities!
I understand that when you connect your iPad to your Windows computer, iTunes does not recognize that it has been connected. For this situation, I would recommend working through the troubleshooting steps outlined in the attached article to resolve this.
iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support
Cheers,
Joe

I am unable to sync my iPad after upgrading to latest operating system. iTunes can't see my iPad when attached to PC. Anyone else having this problem?

I am unable to sync my iPad after upgrading to latest operating system. iTunes can't see my iPad when attached to PC. Anyone else having this problem?

Nicholas...
You may need to restart the Apple Mobile Device.
Follow the instructions here > iOS: Device not recognized in iTunes for Windows

HT1369 I can not see my ipad on itunes

i CAN NOT SEE MY IPAD AIR ON ITUNES

Hello rodfrommasterton,
I understand that your iPad Air is not recognized by iTunes. The following article may help to resolve your issue:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Thanks,
Matt M.

HT4859 I have my iPhone and iPad backed up to iCloud. Recently, I had my iPhone stolen. I am trying to see the iPhone Notes but when I go to iCloud, I can only see my iPad Notes. How can I see the iPhone Notes?

I have been backing up my iPhone and iPad through the iCloud.
Recently my iPhone 4 was stolen but had recently been backed up. I am trying to find the Notes on that iPhone through the icloud.com.
When I go onto icloud.com, I can only see the iPad Notes - not the iPhone Notes.
Can anyone help?
Thanks,
G

Were both devices sync'ing their notes to iCloud? Or was one set to sync, and the other just to backup?
If you look in settings -> iCloud you needed to have the slider by Notes "ON" for both devices if you wanted to sync notes between both of them and iCloud. In that case, notes on each would be identical, and the same as you can view in the Notes app on www.iCloud.com
If you had the Notes slider "OFF" and the iCloud Backup option "ON" then your notes should be in your backup and restoreable, but you will not see them online in the Notes app there.

I have one apple ID for both my Iphone 4S and Ipad. My Ipad was stolen from me and when I checked the iCloud, it can only locate the Iphone 4S. How can I locate the Ipad device?

I have one apple ID for both my Iphone 4S and Ipad. My Ipad was stolen from me and when I checked the iCloud, it can only locate the Iphone 4S. How can I locate the Ipad device?

Welcome to the Apple Community.
You can only locate your device when it is logged into iCloud and 'Find My Phone' is enabled, additionally the device will need to be switched on and connected to a wifi or cellular network.
Unfortunately, you cannot activate iCloud or 'Find My Phone' remotely.

How can i see the "manage devices" in my itunes account? because i want to remove a device from using my apple id. tnx so much

how can i see the "manage devices" in my itunes account? because i want to remove a device from using my apple id. tnx so much

Thanks pvonk, I will try downloanding the book from the Iphone right now.......
Just tried to download and it wants me to buy it again? Is there some way around this? I guess I thought that was the whole point of the cloud, buy it once and access from any of your devices right?
Also, I have logged into the icloud.com as suggested and will plink around there for a bit and try to understand. It is just all so dang different that what I am used to; Apple's way, that is.
Thanks again for the Icloud tip and if you know of a way to download without making a 2nd purchase I would sure love to hear it!
Geez. one other thing (I guess I am complaining) but I bought more space in the cloud, they took my cash fast enough but have not yet increase the size of my storage space yet? Is Apple sometimes slow to get internal stuff done?

I have just upgrade Itunes (10.6.3.25) and now I can not see my Ipad anymore. before the upgrade it was working fine. I already tried all suggestions from the support page, except re-installing Itunes. any suggestions?

I have just upgrade Itunes (10.6.3.25) and now I can not see my Ipad anymore. before the upgrade it was working fine. I already tried all suggestions from the support page, except re-installing Itunes. any suggestions?

SinluFrank wrote:
already tried all suggestions from the support page, except re-installing Itunes. any suggestions?
Yes. Reinstall iTunes. If that is the point at which you stopped trying the support suggestions then it makes sense to me, that you move on to the next suggestion and if reinstalling iTunes is the next suggestion, so be it.
However .... I too have issues that arise out of the blue with my iPad being recognized in iTunes and what I always do and it eventually works is to quit iTunes, restart my MacBook, and reboot my iPad.
Rebooting the iPad is the last thing that I do and only if I have no success with quitting iTunes and restarting the Mac. It may take a few tries to work, but if you are that dead set against reinstalling iTunes, then give it a try.

HT201407 I did update to iOS 7 now I can't access face time , says can connect to network , I am connected to wifi can only see my Ipad on find my iPhone can't locate my iPhone 5 though?

did update to iOS 7 now I can't access FaceTime , says can connect to network , I am connected to wifi can only see my Ipad on find my iPhone can't locate my iPhone 5 though?

Hi, Abril_Perez17.
This may be related to a new feature embedded in iOS7 that shows all purchased music by default. Go to Settings > Music, then turn off Show All Music. See if the issue ceases once the feature has been disabled. This information is located on page 63 of the user guide below.
iPhone User Guide
Regards,
Jason H.

I can't see the iPad option in the preview for the overlays or the folio builder.

I can't see the iPad option in the preview for the folio overlays or the folio buider.
I have the content viewer on my iPad and I am logged into it. This was working before. Getting a new version of the app does work.
Please help.

Hi Bob,
I think there's still something amiss here.
I have the v25 Folio Producer Tools for CS5.5 and the v25 Folio Builder panel. (I'm on 10.6.8 for reference.)
I also have the latest v25 CV from the App Store, and with my iPad Mini plugged in, and the Content Viewer open, the option to side-load still isn't showing.
I thought it might be because I also had a v24 viewer (custom built) installed, but that's not the case. I uninstalled both of them and just downloaded the v25 viewer from the App Store. The result was the same.

WRT600N and Network Places can't see other N device

I just replaced my WRT350N with a WRT600N. After install, my wired desktop cannot "see" in Network Places my other Desktops Shared Drive which has a Linksys WUS300N. This Desktop (with WUS300N) is able to access the internet wirelessly and all settings in router are default. In addition, my wired desktop can "see" all other G devices in "Network Places", but just can't "see" the WUS300N device in Network Places. Once I put the WRT350N back, all devices can be seen in Network Places. Shut down WRT600N, restarted all units, shut off/on sharing, turned firewalls off...no change
My wired desktop is Vista Premium 32 Bit
My wireless desktop is XP Home Edition

I replaced my WRT350N with the WRT600N too because of all the problems with the 350N and to have the dual band as most of my laptops have wireless N cards. I have not had any problems with this router other than only being able to access my USB Tera drive with my XP machines using ftp, if I try to search for it under network neighborhood as I do on my Visa machines and it only brings up default and it won't let my access my share that I created even with the user I created as an admin on the router to access the USB drive share, but since I can access it using ftp I am not concerned at all and otherwise this router is letting all my N wireless cards including the intel 4965N connect at 270Mbps all the time at the same time 3 other laptops that my kids use are connected too with wireless G cards, so I am a happy camper so far.

My iTunes can't see my iPad on my mac HELP!!!

My iTunes can't see my iPad on my mac HELP!!!

Make sure all the plugs are in tight.

I can't see my removable device.

I have xfce4 interface installed and pretty much everything.
It runs smooth, and fine.
But today when I try to use my USB stick to transfer some files, I can't see the removable device (USB Stick) in my file manager. ( Looked in cd home, and filesystem.)
Can someone help me how to make my removable device to show up.
I even used this command # udevadm monitor when my usb was plugged in and when I remove it, i get message in the terminal saying "remove blah blah blah".
I believe my usb ports are working fine, but I dont know how to locate my usb stick folder.
Help is appreciated. And please I try searching on google plus even forums, and can't understand or find the solution for it.

This is the output I got when I typed "dmesg | tail -20"
[ 74.331797] wlan0: RX AssocResp from 00:27:3a:f5:ee:34 (capab=0x431 status=0 aid=3)
[ 74.331801] wlan0: associated
[ 127.497316] NET: Registered protocol family 10
[ 223.259055] usb 2-1.3: USB disconnect, device number 3
[ 225.956633] usb 2-1.3: new high speed USB device number 4 using ehci_hcd
[ 225.980187] hub 2-1:1.0: unable to enumerate USB device on port 3
[ 226.173222] usb 2-1.3: new high speed USB device number 5 using ehci_hcd
[ 226.280429] scsi5 : usb-storage 2-1.3:1.0
[ 227.280002] scsi 5:0:0:0: Direct-Access pqi IntelligentStick 0.00 PQ: 0 ANSI: 2
[ 227.281271] sd 5:0:0:0: [sdb] 15771720 512-byte logical blocks: (8.07 GB/7.52 GiB)
[ 227.281763] sd 5:0:0:0: [sdb] Write Protect is off
[ 227.281772] sd 5:0:0:0: [sdb] Mode Sense: 00 00 00 00
[ 227.282285] sd 5:0:0:0: [sdb] Asking for cache data failed
[ 227.282292] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 227.285682] sd 5:0:0:0: [sdb] Asking for cache data failed
[ 227.285687] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 227.702336] sdb:
[ 227.705046] sd 5:0:0:0: [sdb] Asking for cache data failed
[ 227.705053] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 227.705057] sd 5:0:0:0: [sdb] Attached SCSI removable disk
p.s Thx for all your replies.
And I do manually load my xfce interface.
When I boot the computer it does not go straight to xfce interace.
I have to manually load it by typing "startxfce4"
And I dont know what you mean by manually mounting it.

Flash CC can't see my iPad device

Similar Messages

Maybe you are looking for