Flash CC et Source Symbol

Bonjour
Dans Flash CC je ne retrouve pas la section "Source" du paneau "create new symbol".
Y a t'il une alternative à ce processus dans la version de flash CC ?
Merci

Dans les options avancées (cliquer sur le petit triangle avancé)
Je suppose que vous parlez de ce panneau (en anglais) :

Similar Messages

When i download any file it start in a second but when i pause the downloading file & after some time when i open it amessage flash 'download error' source file could not be read please try again later or contact the server administrator.

when i download any file it works frequently and downloading start in a second but when i pause the downloading file & after some time when i open it,The downloading not start proper and after some time a message flash 'download error' source file could not be read please try again later or contact the server administrator.

I downloaded the Microsoft Autoruns package and ran it. There are no programs in the LSA Providers tab, and Apple's Bonjour is the only program in the Winsock Providers tab. I also did the "netsh winsock reset" and rebooted. It didn't fix the problem. Any more ideas?

Source symbol does not exist

Hi!
when I am creating purchase order, system is giving error message source sumbol does not exist, and when I click on Proceed, system is taking to OT05.
But OT05, all the source symbols have been defined.
Planning levels has been maitnained in vendor/customer masters/GL accounts.
Planning level and source have been maintained.
Planning level is assigned to planning groups.
Define planning levels for Logistics.
can any one explain what could be the problem.
regs,
ramesh b

Dear Ramesh,
I am also facing similar issue while saving purchase order.
While saving purchase order getting error as 'Source symbol does not exist'.
If you have solution can you please share it with me.
Regards
Suresh Naidu

Flashing do not disconnect symbol

i plugged my ipod into the usb (regular, not 2.0) and it just keeps flashing "do not disconnect" with the red symbol. it appears the ipod got charged. nothing happens when i hit menu, or any other button. when i go to the button on bottom of screen it just says "apple ipod usb device cannot be stopped right now. try stopping it later" ok hopefully someone can helpme (please?)

Hi coffeandtimbits,
Let's try resetting your iPod:
First, toggle your iPod's "Hold" switch back and forth a couple of times. (leave it on the white side of the switch, which is the Off position)
Then, press and hold the Menu and Select (center) buttons together for 5-10 seconds.
After your iPod displays the Apple logo as it resets, it should display the normal main menu for a couple seconds, then flash back to "Do Not Disconnect".
Open up iTunes, and see if it syncs from there. If it does, then, when the sync is complete, click on the little arrow next to your iPod's name in the Source List (the left display panel) of iTunes.
Hopefully, at this point, your iPod will safely eject, and show the Main Menu screen. It is does this, then it should be fine to unplug it from your computer.
If your iPod isn't recognized in iTunes, or you can't successfully eject it from there, then this is probably the best thing you can do to safely disconnect your iPod (withOUT unplugging it when it says not to):
Close all applications that are running on this user account, and other user accounts on your computer, as well.
Then, turn off your computer (with your iPod still connected).
After the computer has fully shut down itself (the HD quits spinning, etc), unplug your iPod from your computer.
-Kylene

FLEX debugger not hitting breakpoints, because Flash sometimes embeds source file paths with wrong letter case?

I was trying to figure out why breakpoints were working fine for source files in some locations but not others. FlashDevelop's debugger (which I believe is actually the FLEXSDK debugger) was successfully connecting, tracing output, and hitting breakpoints in SOME files, but not others.
I downloaded SWFInvestigator from Adobe Labs and checked the embedded debug paths for various source files to see what was going on.
I discovered that files in which no breakpoints could be hit had their paths embedded in all lowercase (e.g. "c:\users\username\desktop\source\myproject" instead of "C:\Users\username\Desktop\source\MyProject").
So I have two questions:
First, is this a Flex debugger issue, or a FlashDevelop plugin issue? Letter case shouldn't matter or interfere with matching file paths in Windows.
Second, what could possibly influence the letter case of embedded paths in a SWF output by Flash Professional (CS6), such that they are sometimes all lowercase and other times maintain the same case from the file system? And why would that affect a debuggers ability to hit breakpoints in Windows 7? I am compiling in multiple ways. Sometimes clicking Publish within Flash. Sometimes the file being published is not even open in Flash, and my JSFL script file is passed to Flash.exe containing embedded file paths to open the document. Usually, everything seems to work fine, no matter where I publish from, regardless of whether the FLA file is open or not. I'm honestly starting to believe that it depends on how the FLA was last opened in Flash Professional, as though it saves some sort of last access path internally and uses that to embed debug information.

I don't think it's the source path in my case, because it's simply the dot ".", although I did check that because it would most likely influence the embedded paths.
In the library path, I use relative paths exclusively, since all my individual project folders exist in the same "source" folder.
Here's how I arrived at the conclusion that something more complex or "stateful" must be occuring:
I publish my files with a one-click application, which does the following
updates version timestamps (static constants) in specific files via regex match
fills in a JSFL template with the FLA filename and writes the JSFL file to disk, then passes the JSFL file path to flash.exe for publication
the JSFL then runs a command, which signals the main application via cross-process communication that the script has finished publishing
That all makes it easy for me to update and publish multiple projects and deploy them, with a single click. Here is the JSFL template I created, which has been drastically simplified since the days where it used to search to see if the file was open in Flash, select the document, and call publish. Now it just uses the publishDocument method to silently publish files without opening them.
var filepath = "FLAFILEPATH"; //template parameter: the URI (beginning with "file:///") of the FLA file to publish
fl.publishDocument( filepath, "PUBLISHPROFILENAME" );
FLfile.runCommandLine("COMPLETECOMMAND");
The C# app replaces the strings in all caps with the actual values. The COMPLETECOMMAND is actually populated with the application's own executable path, along with a "complete" switch, which lauches a 2nd instance, which handles the complete switch by broadcasting a signal over an interprocess channel and then terminates. The main instance captures the signal, triggers a wait handle, and continues with publishing the next file. Here is the core code for it:
private string fillTemplate( string fla_directory, string fla_filename, string publish_profile_name )
    string fileuri = "file:///" + Path.Combine( fla_directory, fla_filename ).Replace( '\\','/' );
    return EmbeddedResources.OpenAndPublish //JSFL template file embedded as string resource
        .Replace( "FLAFILEPATH", HttpUtility.JavaScriptStringEncode( fileuri ) )
        .Replace("COMPLETECOMMAND", HttpUtility.JavaScriptStringEncode( "\"" + Application.ExecutablePath + "\"" + " -publishcomplete" )) //call self with -publishcomplete switch to signal main instance's publishCompleteSignal
        .Replace("PUBLISHPROFILENAME", HttpUtility.JavaScriptStringEncode( publish_profile_name ) );
private static readonly string FLASH_PATH = @"C:\Program Files (x86)\Adobe\Adobe Flash CS6\Flash.exe";
public void publish( string fla_directory, string fla_filename, string publish_profile_name )
    Program.publishCompleteSignal.Reset();
    string template = fillTemplate( fla_directory, fla_filename, publish_profile_name );
    string curdir = Environment.CurrentDirectory;
    string tempJSFLfilepath = Path.Combine( curdir, "temp_script.jsfl" );
    File.WriteAllText( tempJSFLfilepath, template );
    Process p = Process.Start( FLASH_PATH, tempJSFLfilepath );
    Program.publishCompleteSignal.WaitOne( 30000 ); //timeout after 30 seconds
Here's where it gets interesting. The FLAFILEPATH has ALWAYS been passed in as all lower case, yet this publication method has worked 99% of the time for hundreds of publish operations every day. This applies to both the publication of the first SWC, which is referenced by the second published SWF (both were being published with lowercase paths), yet the paths for the main SWF were remaining in lowercase, while those in the referenced SWC were maintaining the correct case from the file system.
So there may be any number of things going on here. SWCs may be published differently than SWFs, such that SWCs always have the correct letter case for debug source files, regardless of how the source FLA project was opened. Ensuring the path passed to publishDocument uses the right case definitely fixes the problem, but it doesn't explain why it usually worked, despite having always been passing a lowercase string. The only variable I can think of in all of this is Windows itself or Flash, such as whether the document was open in Flash at the time the silent JSLF publishDocument command ran, and how that FLA was last opened (via shortcut, via "recent documents" in Flash, via recent documents in Windows. It has to be something, even if it's something as obscure as how the folder path was last accessed in windows, although I strongly suspect it's just how (in terms of path case) the FLA was last opened in Flash.
In any case, I'm happy that passing the right case to JSLF's publishDocument command fixes the problem, so I'm not going to spend any more time trying to figure out how opening the FLA in various ways could affect the embedded debug paths. The only thing that should be done is to address how paths with the wrong case are handled when they do get embedded that way for whatever reason. Perhaps the flex debugger should be updated to use case-insensitive matches in case-insensitive file systems, unless, perhaps, this is a FlashDevelop debugger issue after all.

IPhone 4 will not charge but shows a plug to power source symbol, help!?

I purchased my new iPhone 4 (32GB) about a month ago just before Christmas (2010). About a night ago I was speaking on my iPhone when the battery died and the iPhone shut itself off. Now I have run down the battery before and understand the phone requires a good 10-15 minutes plugged in before it will switch back on.
Upon plugging iPhone in and leaving for quite some time all I was shown initially was the large battery symbol in the middle of the screen the lightening bolt symbol underneath. After a few seconds the lower lightening bolt symbol flashes between the bolt and a plug symbol pointing via an arrow to another lightening bolt symbol.
The battery refuses to take charge and so will not switch back on. And this symbol on appears when I plug the phone in. The charger is fine as the phone recognises it has been plugged in. I even tried my friends identical iPhone charger and the same symbols appeared. This also occurred upon plugging the phone into my MacBook Pro. iTunes even did not recognise the phone was plugged in.
I have not had any progress from these symbols since this happened two nights ago and would be very grateful for any advice anybody might have please. Unfortunately I live in Leeds, UK and my nearest Apple retailer is very far in Sheffield, and without a phone I cannot call Apple Technical Support.
Much appreciated,
Andy F.

It won't recognise it at all, but luckily I backed up very recently.
I've booked an appointment with an Apple store who promise a working iPhone within 10 minutes of your appointment, whether fixed or a brand new iPhone.
Thank you both for your suggestions. I'll leave the question unanswered incase people have any other suggestions or similar issues.
Cheers.

Flash CS5.5 Pro symbol properties window on OSX 10.7.2 Lion

Hello
My Flash CS5.5 is working ok on my new MackBook Pro, running OSX 10.7.2 Lion, although when I try to insert a new symbol or try to acces the movieclip's properties from the library, the propteries window doesn't appear! I am able to add a new symbol by pressing enter so it's working ok it's just I can't see the window anywhere and I can't interact with flash at all unless I press esc or enter a new symbol.
Does anyone know why this is happening and can give me some help please? I have updated to the latest version too.
Thanks
Adam

Has no one had this problem?

Flash Pro CS5 Replace Symbol Issue

In Flash CS5 pro, when I replace a symbol in the library, it seems to break the refresh of the item(s) in the timeline and on the stage.
For example, if I have a movie clip called "mouse" and modify it in one file, then copy that symbol into another Flash file (either copying it from one library to another, or copying a frame from one timeline to another, etc) it replaces the file....
...BUT the timeline layer that item is on turns blank and the item on the stage doesn't update.
When I scrub the timeline, the object appears and the timeline populates...
...BUT if I have applied tweens to the symbol, I can't preview them by scrubbing the timeline.
Also, none of the symbols used in the file consistently update on the stage or in the timeline.
If I try to change a tween in the timeline on any object, it doesn't update on the timeline (I can't see the tween).
Finally, if I publish the file while this issue exists, the object that I replaced does not tween properly.
In the end, I am forced to save the file, close Flash, and restart. When I restart, the replaced object is there, it tweens correctly, and the file and everything in it functions and its library functions normally.
I've never had this issue with previous versions of Flash. At times it is simply annoying, at other times it is a serious issue when I have to replace large numbers of symbols in large projects.
Anyone else had this issue, or have a recommendation for a fix?
My system is fairly robust... quad core 3.0 ghz, 8gb RAM, 3 x 500gb HDD, Windows 7 64 bit...and I ran Flash Professional CS4 on this same system without any of these issues.
I have the same issue on my work system, which is a completely different system.
I tried searching for a solution, but didn't find an issue listed that matched my problem.

Try file->save-as and save down to a CS4 document. Then try it. I've had a lot of really weird issues with CS5 in the past that saving down to CS4 somehow corrected. Although I use CS5.5 currently. Docs made in CS5 often don't even import into CS5.5 correctly. I need to go in CS5, open it, save down to CS4 and then reopen in CS5.5. There's something about saving down to CS4 that seems to fix things.
You can always save down to CS4, work in CS4 to make your changes then import it back into CS5 and export it.
In this world things are too complex and sometimes although it's not ideal, just getting it done for deadline is the real job.

Steps to ensure all Adobe Copyright requirements are met with Flash Builder generated source files?

I'm currently doing copyright scanning on our product to look for open source copyright banners, and to make sure we are correctly following all copyright requirements for our licensed software.
That said, our entire team uses licensed Flash Builder 4.7's to build our client in Flex. Several of the source files generated by the Flash Builder (especially skins) have Adobe Copyright banners on them.

I can't find any assistance or online help that outlines how I fulfill the "accompanying" portion of that clause. Is there something I can add to our arbitration file or documentation to satisfy that?
Thanks,
Joe Firebaugh

Read your posting too fast, sorry.
On the Mac, select a text file (.TXT file) in the Finder. Choose File > Get Info. In the Open With section, select the editor you want to use for TEXT files. Click Change All.
Sometimes, you have to do this with more than one TXT file, but it should work.

How do i get rid of a white screen and flashing with a file symbol

when i went to tunr on my macbook air my screen went white and then a flashing flie symbol came on can someone help me?

It means it cannot find the boot volume, or the operating system is corrupt. First try to flash the PRAM, http://support.apple.com/kb/PH11243. Then boot to recovery HD, http://support.apple.com/kb/HT4718, by holding command and R as you boot the computer. You can attempt to repair the disk using Disk Utility, http://support.apple.com/kb/HT1782. If you cannot boot to recovery HD, then use Internet recovery, which is in the same article. If you don't see the drive in Disk Utility, the drive likely has a hardware problem and will need to be serviced.

After restart i see flashing between old classic symbol and question mark

hi,
i just shut down my g4 ibook by holding down the power button as it had frozen. when i done that i wiped the keyboard with a cloth. when it restarted i get a small symbol (a square 2-tone blue face, not sure if it's the classic 9 symbol) and a question mark flashing in the middle of my screen.
how can i restart my machine normally please?

Hi John,
Flashing question mark when starting up can mean several things. One, your iBook can't locate a System Folder to boot from or the hard disk is failing.
Try starting up while holding down the Option key. That normally would prompt the Startup Manager window where you can select your startup disk.
If that doesn't help, ditto for Niel's suggestion.
More help when you see a A flashing question mark appear when you start your Mac
Carolyn

Flash IDE randomly creating Symbols

Hey There
For some reason I have not been able to figure out, every so
often I'll look over at my Library in the Flash IDE and see (at the
bottom of the Library list) a bunch of numbered Symbols that Flash
has (apparently) just randomly generated on its own. The symbols
are always of other elements in the project that are already in the
Library, and they get names like Symbol 81, Symbol 82, Symbol 83.
It's so weird, and annoying (especially since its adding to my file
size!)
Anyone know what's going on here?
Thanks,
Graham

Nope. The same darn thing is happening to me. I import a SWF
and it breaks into pieces, adding fragments to the library of
bitmaps and symbols named stuff like "symbol 82" and "symbol 83."
No tweening going on. I hope someone can help!

Flash Navigation & Links Source File Issue

Hello Everyone,
I am using a flash template for my site's navigation. I have edited it myself. With it, a URLS.txt file must be used to provide the links for the flash buttons. I have edited this file, and placed it all on my site.
The problem? The links are recognized in IE6.0 and Firefox on a computer running Vista. As well, my computer (an Apple MacBook with Leopard) allows the links to click through with Firefox. HOWEVER, when I try to navigate with my Safari 3.0 I get a pop up programmed in to the flash file that no URL was specified.
How the heck can this work on some browsers and not others? I obviously set it up correctly... but something is off.
Anyway, please see for yourself;
http://www.caseit.net
Thank you in advance!

My mistake Rob! I just checked, and I do have Safari 4.0.2 on a Mac. For me, when I click on the first navigation link "About CaseIT" I get a nasty javascript popup explaining that I didn't provide a link.
I wonder why *my* Safari doesn't allow it to work, but yours does... as well as other browsers sometimes do. (My coworker can't get the links to work on IE6.0 at her work computer) but it works on MY IE6.0 on my desktop. Strange.

Elemants disapearing in flash cs5 leaving empty symbols (Movie-Clips) where the elemnt once was.

Hi,
I work for with Flash CS5 for an advertising company. We make banners and my job is to animate them. Lately I have been having a weird issue.
When I work on a flash file all is well, I save export and all, but later when I come back to the file for modifications some of my elements are disappearing?! Most of the elements are imported from illustrator CS5 and they seem OK when I leave but when I come back I see just empty Movie-Clips.Things seem to disappear without any logic, for example some text layers can disappear while some don’t.
This issue is frustrating since it's causing much work and I would really love to resolve it.
Can anyone guide me as to what I should do. I will gladly provide any info needed.
Thank you.

that's a task much easier to do using actionscript rather than use the timeline. each location or parent location (if you want one parent for retail and one for residential etc) could have two keyframes. one for highlighted locations, the other for non-highlighted. you can timeline tween between the two keyframes, if you want.
your main timeline would not change frames. clicking the retail toggle button would cause all retail locations to tween to the highlighted frame. clicking it again, it should cause the retail locations to tween to the non-highlighted frame.
likewise for you other buttons and other locations.
this setup will remove the complications caused by having various combinations of buttons toggled on and off.

Flash CS3 Make a symbol change alpha on mouse scroll?

So i have been trying to change the alpha by scrolling but no clue what to do. I tried this code
m2.addEventListener(MouseEvent.CHANGE, changeAlpha);
function changeAlpha(e:Event):void {
m2.alpha = m2.value/10;
and it works but it disappears fully and i cant scroll other way to bring it back. I know i need MOUSE_WHEEL but it just breaks the code

you can use the MouseEvent.MOUSE_WHEEL event.

Flash CC et Source Symbol

Similar Messages

Maybe you are looking for