Flash CC is showing objects too large on my retina display?

For example,
If i create an image 2560px wide (which is the width of my screen) in photoshop and then import into Flash CC, it shows up on the Flash stage as almost twice that wide....
Any help would be greatly appreciated.
Thanks

In addition to simple pixel resolutions photoshop has the option of ppi.
If you choose 144 ppi (which might be reasonable if you target retina displays) and 550x400 pixel
The picture will appear double sized on flash old-school 72pppi /550x400 pixel stage.

Similar Messages

The requested transformation would make some objects too large.

Please help.
I load a PNG in Illustrator. However when it loads it doesn't load right. It loads HUGE. When I try and move it, it says:
"Can't move the objects.The requested transformation would make some objects too large."
I am pulling my hair out here. Why the hell can't Illustrator just open a bloody PNG and allow me to edit it?!
Any advice would be appreciated. Thanks.

I see, Christopher.
It seems that something is seriously wrong.
You may try the following (you may have tried/done some of them already) and see whether it helps (the following is a general list of things you may try when the issue is not in a specific file; 3) and 4) are specifically aimed at possibly corrupt preferences):
1) Close down Illy and open again;
2) Restart the computer (you may do that up to 3 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder http://www.bugge.com/Family-and-friends/Illy/illy.html (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

Error: requested transformation would make some objects too large

working in Illustrator CS2, and am getting the error "Can't move the objects - The requested transformation would make some objects too large." From reading another post (that I am unable to find to reply to) I gather this may have to do with some guides. I have unlocked all guides through View Menu. Interestingly, according to help I should have hte selection to "view" guides. I don't find it. My problem is, i can find the guides to either delete or convert to an object to see if this will alllow me to move the objects. it is a 1 layer artwork, with multiple groups (too many too count),and multiple paths under each group (again, too many too count). This artwrok is a map printed to .pdf from SMT Kingdom. Kingdom is not very powerful, and I often annotate and edit maps in Illustrator; I frequetnly get this error when I have a map with contours on it.
Any ideas?

Because of the nature of my map, I do tend to have "landgrid" and other type of data that "extend" way beyond my actual image. for example, print to 8.5 x 11, and i might have a river that is part of my landgrid, that extend beyond the page size. The software from which I am printing does not "clip" this river. I have many times attempted to select and delete all this extraneous stuff, to alleviate my problem with "make some object too large", but no luck. I can assure you I don't have an object WAY off the page...i have zoomed out to the moon.

How to get a usb device to show up on macbook pro 13inch retina display late 2013 model. os mavericks

how to get a usb device to show up on macbook pro 13inch retina display late 2013 model? os mavericks

Check with your telephone carrier or Android:
https://www.android.com/filetransfer/
Ciao.

Error message: object too large

It says: this object is too large to render, and will be cropped. The maximun size is 2048x2048. I am not sure what that means. Any help, Thanks!!

You have a rather poor GFX card to go on working with Motion, but the work around is to resize the object you added. One way to do this is to select your layer and hit SHIFT+F to show the file in the media tab. Then go to the media tab in the inspector where you'll see the Fixed Width and Fixed Height sliders. Crank those down to an acceptable level.
Andy

PSE 6 slide show photos too large for TV screen

I have been collecting, scanning and saving family photos for over a year to create a slide show for my 81 yr. old Dad. I create a slide show with PSE 6, save to a CD and play on the TV. No matter what pixel size I resize the photos to they are still too large for the TV screen - not just one TV screen but different ones I try. I loose heads at the top, feet at the bottom, people on the sides. I have been researching but have not found the answer to solve my problem. Anyone have the answer or some suggestions I would be very appreciative. Thanks.
Scrap Grannie

Well, first of all, choose the right resolution and frame-rate...
Are you working in NTSC (30 fps), or PAL (25 fps)...?
Use one of the common DV formats /
if you choose HD, 1080i, then your TV must be able to recognize that format,
otherwise images get cut off...
Format Rectangular Size Square Size
DV NTSC................................................720x480.............................. ...720x540
DV PAL...................................................720x576............................ .....768x576
HDV 720p..................................................NA................................. ....1280x720
HDV 1080i.................................................NA................................. ....1920x1080
Stay with your chosen format through-out your whole project...
(PNG, TIFF or PSD), import those files into your video editor.
Depending on the Operational System (Mac or Windows), one has many choices...
http://en.wikipedia.org/wiki/List_of_video_editing_software
After editing, import those files into your chosen Authoring software for burning,
they will take care of the appropriate compression.
(I would recommend burning to DVD, not CD, one will achieve much better quality...
Regards
Nolan

Debug object too large

Hi,
When i try to debug webkit on solaris, i get this issue:
libwebkit-1.0.so.2: Value too large for defined data type terminating signal 9 SIGKIL
-rwxr-xr-x 1 jack staff 2.9G 2010-10-14 02:32 .libs/libwebkit-1.0.so.2.17.5
Any way to get around this? or some compile options to reduce the size of debug object?
BR,
Simon Jin

The error message is actually from the dynamic linker.
Can you run the application outside of the debugger?
Try this:
$ echo $LD_LIBRARY_PATH
$ <your-a.out>
Does it work?
Now do the same inside dbx.

ACE 20 Modular - show tech too large

Hi
A Client sent me a show tech of this ACE 20, is inserted into a VSS, but this file is very large, the reason is a command "show acl-merge merged-list vlan 93".. Somebody can tell me is this information is normal, or not, I think that is possible attack point to the farm server. the service is up, in the other ace20. the symptom is can not reach the VIP of the service.
`show acl-merge merge vlan 93 in`
All ACEs in merged list 5 Total:6377 Non-redundant:5608
Priority:164, Lineno:0, ACE-id:61470 Action:PERMIT, Path-id:0x81/0x0/0x0:6/0[6/]
Pmap:0x5, Log:FALSE/FALSE[FALSE][FALSE], Interval:0/0[0][0]
Hash1:0x0 Hash2:0x0
Generated:TRUE, need-to-add-in-comp:NO_ACT_NEEDED, redundant:FALSE
Parent:: feature:SECURITY ace-lineno:8 ACL priority:0[G:0,P:0,C:0,ACL:0]
Parent:: feature:TO CP ace-lineno:2 ACL priority:16779265[G:0,P:1,C:8,ACL:1]
Feature:SECURITY Policy:1[1][1] sec-level:0x0 Intratype:SKIP
Feature:TO CP Policy:1[1][1] sec-level:0x0 Intratype:TERMINATE
Intertype:TERMINATE
IP address SRC:0.0.0.0/0.0.0.0 DST:172.23.98.20/255.255.255.255
Ports SRC:RANGE 8 8 DST:RANGE 0 0
Protocol:1
Hit Count:0 Active:TRUE Timerange:0
Priority:326, Lineno:0, ACE-id:61471 Action:PERMIT, Path-id:0x81/0x0/0x0:6/0[6/]
Pmap:0x5, Log:FALSE/FALSE[FALSE][FALSE], Interval:0/0[0][0]
Hash1:0x0 Hash2:0x0
Generated:TRUE, need-to-add-in-comp:NO_ACT_NEEDED, redundant:FALSE
Parent:: feature:SECURITY ace-lineno:8 ACL priority:0[G:0,P:0,C:0,ACL:0]
Parent:: feature:TO CP ace-lineno:2 ACL priority:16781313[G:0,P:1,C:16,ACL:1]
Feature:SECURITY Policy:1[1][1] sec-level:0x0 Intratype:SKIP
Feature:TO CP Policy:1[1][1] sec-level:0x0 Intratype:TERMINATE
Intertype:TERMINATE
IP address SRC:0.0.0.0/0.0.0.0 DST:165.183.93.51/255.255.255.255
Ports SRC:RANGE 8 8 DST:RANGE 0 0
Protocol:1
Hit Count:0 Active:TRUE Timerange:0
Priority:487, Lineno:0, ACE-id:61472 Action:PERMIT, Path-id:0x81/0x0/0x0:6/0[6/]
Pmap:0x5, Log:FALSE/FALSE[FALSE][FALSE], Interval:0/0[0][0]
Hash1:0x0 Hash2:0x0
Generated:TRUE, need-to-add-in-comp:NO_ACT_NEEDED, redundant:FALSE
Parent:: feature:SECURITY ace-lineno:8 ACL priority:0[G:0,P:0,C:0,ACL:0]
Parent:: feature:TO CP ace-lineno:2 ACL priority:16783361[G:0,P:1,C:24,ACL:1]
Feature:SECURITY Policy:1[1][1] sec-level:0x0 Intratype:SKIP
Feature:TO CP Policy:1[1][1] sec-level:0x0 Intratype:TERMINATE
Intertype:TERMINATE
IP address SRC:0.0.0.0/0.0.0.0 DST:165.183.93.51/255.255.255.255
Ports SRC:RANGE 8 8 DST:RANGE 0 0
Protocol:1
Hit Count:0 Active:TRUE Timerange:0
Priority:647, Lineno:0, ACE-id:61473 Action:PERMIT, Path-id:0x81/0x0/0x0:6/0[6/]
Pmap:0x5, Log:FALSE/FALSE[FALSE][FALSE], Interval:0/0[0][0]
Hash1:0x0 Hash2:0x0
Generated:TRUE, need-to-add-in-comp:NO_ACT_NEEDED, redundant:FALSE
Parent:: feature:SECURITY ace-lineno:8 ACL priority:0[G:0,P:0,C:0,ACL:0]
Parent:: feature:TO CP ace-lineno:2 ACL priority:16785409[G:0,P:1,C:32,ACL:1]
Feature:SECURITY Policy:1[1][1] sec-level:0x0 Intratype:SKIP
Feature:TO CP Policy:1[1][1] sec-level:0x0 Intratype:TERMINATE
Intertype:TERMINATE
IP address SRC:0.0.0.0/0.0.0.0 DST:165.183.93.61/255.255.255.255
Ports SRC:RANGE 8 8 DST:RANGE 0 0
Protocol:1
Hit Count:0 Active:TRUE Timerange:0

Hi.
We reboot the ACE20, and let one contex in this module.. The services is OK now, but my only doub is why the show tech-support is too large and appear the out of command show acl-merge merged-list vlan 93, with a lot of line..
I try to run command "show tech-support" again and submit.

IChat font sizes show up too large on other computers

Has anyone else seen an issue with iChat 4's fonts showing up considerably larger on other people's (usually Windows-based) computers? I'm using the default Helvetica 12 and it shows up at least 2px larger on other's screens.
If I make the font closer to 10, it shows up fine on other's screens. Then of course, it seems to small on my end.
Any ideas?

Most likely the differences between a Macs 72pixels per inch and the PC settings default is 96 pixels
No one has complained to me about this.
It may of course be that they are defaulting to a different font because they don't have the one you are sending.
10:37 PM Wednesday; October 31, 2007

InputFile doesn't show File too large message

Hello,
I've got an inputFile component on my adf page and maximum file size specified in web.xml:
<af:inputFile id="if1" binding="#{backingBeanScope.UploadBean.inputFile}"
   valueChangeListener="#{backingBeanScope.UploadBean.onUploading}"
   autoSubmit="true" simple="true" label="Upload"/>
<context-param>
    <description>Should be 250Mb</description>
    <param-name>org.apache.myfaces.trinidad.UPLOAD_MAX_DISK_SPACE</param-name>
    <param-value>262144000</param-value>
</context-param>When I'm trying to upload a 400Mb file the application gets busy for a couple of seconds and then a red border around inputFile appears.
But there's no message.
How could I specify a userfriendly message?
Like it this post: http://andrejusb.blogspot.ru/2010/12/oracle-ucm-11g-uploading-large-files.html
Upload works fine, this thread is only about "File too large" message.
Thanks.
JDev 11.1.2.3

You are wrong. The file uploading starts in the background. Your listener only gets the stream once it already on the server (either in memory or as a temporary file).
If you use Chrome as a browser you should see that the upload starts, but the processing is canceled once the server finds out about the file size. All this is checked before you get control.
Do a small test and remove the autoSubmit="true" and you'll see the message.
Timo

Contact photo's show us too large?

Not a big deal but just wondering if anyone else is experiencing or have even noticed when some of your contacts call you their contact photo is too big for the screen? Like it was resized or something? I upgraded from 3G to IP4 so I'm sure that's the problem but is it a photo compatibility issue or something else?

Hello. I'm having the *exact same issue* since restoring up my iPhone 4 as a new phone.
When a call comes in or when calling someone on my contact list, the photo associated with the contact person is *skewed larger*. Too big for the screen.
Other than resizing every photo in your contact list, have you found a fix for this issue yet?
Thanks.
Dan

When you download a movie or tv show on a macbook pro with retina display where does it go?

Where do downloaded movies and tv shows go once downloaded on a mac book pro?

It should go to your downloads folder.
Ciao.

Photoshop 100% 72dpi is too small on Mac Retina Display

I see a lot of threads about this.
Well, the other day I actually had a tech from Adobe on the line, and after much wailing and gnashing of teeth, he admitted, "It's a Photoshop issue".
Apparently they are looking into it, just not quick enough. It is unfortunate because it seriously affects our ability to work effectively in Photoshop as you don't get the mostly accurate visual sizing.
We can only hope... Come on Adobe, FIX IT!!!

I am going to explain this one more time, it is also clear that some are not understanding my question, as I am making comparisons that are relevant, not just saying why is my Photoshop image soooo small...
My question is, at 72dpi image, why is the image smaller in Photoshop than what it displays in the browser, both at 100%. So you are not answering my question, I am comparing the same image, at 100% in Photoshop to Chrome, Safari, Firefox... and in Photoshop the image is significantly smaller.
Before, on previous Macs, the Photoshop image, at 100%, was similar to the same image, at 100%, in Chrome, Safari, Firefox.
So, since the retina display came out, Photoshop has an issue, but not my Chrome, Safari, Firefox? And everyone is saying it's the retina display even though it did not affect Chrome, Safari or Firefox?
NOTE to twenty_one - if Photoshop is displaying at 100%, one pixel is represented by one screen pixel, then Chrome, Safari and Firefox are representing them at 2 screen pixels. Right, as the image is double the size on screen? Plus, in Chrome, Safari, Firefox the image are super clear.
NOTE to Semaphoric - Never said we've had retina display since the 90s but your obvious frustration must have made you assume what I wrote. Not very nice.

Mac Mini display is too large for screen on only one user account

Okay, so I left my two year olds alone for a minute playing the "alphabet game" on my Mac Mini. They only had the keyboard, no mouse but managed to muck up my display leaving me a bit frustrated. The screen is now too large for my Samsung display. The only way to see everything (dock, top bar, etc) is to move my mouse arrow to the end of my display and see it roll back onto the page. I've checked the settings there and they are fine. The MacBook Pro plugs right in and is proper resolution. So I then wondered if another account on the Mac Mini would do the same thing. I logged out of my Admin account and into another and everything looks just dandy. I log back into my Admin account and it's too large and blurry again. The resolution is set correct at 1920x1080 at 60 Hz.
What button did they push on my keyboard that would do this and how do I get it back?? Aargh! Thanks all!

Ha, figured it out myself from another discussion forum finally. Thoght I'd share in case anyone else runs into this. They must have hit "Zoom" by htting the "Control" and scroll buttons at the same time..
Resolution:
You can zoom out by holding down the Option and Command buttons on the keyboard and, while you hold them down, pressing the - key.

Why do pages like natwest and ELC not display properly? It is like their text is too large, yet other pages are fine?

I have abrand new ASUS notebook with a 11 and a half inch screen. I have up to date Windows system, and am using the latest version of firefox. I have gone through all the tips in the help section of firefox including clearing cache and cookies, and also checking all settings for text, however none of this has corrected the problem. For example when i log into my online banking the text is that big it doesnt fit into the boxes set on natwest screen, so therefore i can view all of the text and it gets jumbled together in some places. With ELC a good example is the menu across the top of the page which gives all of the categories of products they sell for you to click on. As the writing is too large it does not display properly. Im not sure what else to do to crrect this. Can anyone help?

Try 2 things, if they can help:
1. on the same window, where you have 1 of above site opened. Do ctrl + F5.
2. Do Ctrl + shift + P, it will open a new private window and browse any of the above site.

Flash CC is showing objects too large on my retina display?

Similar Messages

Maybe you are looking for