Flash Charts not working after 3.1 install

I installed Apex 3.1 and ran the sample application. Everything seems to work fine except the chart page. I get some lines but no graph. I am using the PL/SQL gateway if that makes a difference. This is the first time I've not used the HTTP server.
Has anyone else had this problem?

user447071,
I would check:
1) Can you access the flash files directly? Look at the page's HTML to find reference to an SWF file, then try to access that from the URL.
2) Is the XML coming back properly? Run the page in debug mode, then click the "Show XML" link after the Flash chart.
- Marco

Similar Messages

Apex flash Chart not working after upgrade to #5.1.3

Hi,
I am using oracle apex 4.0,database11g and i upgraded the apex flash chart to #5.1.3, also i am using the partial page refresh (html_PPR_Report_Page) in every 5 sec time interval.
However after about 5 seconds the charts dissapear and never come back unless you manually refresh the browser.
Could y please suggest.
Regards,
Saroj

Like junkyardheart, mine cleared up. After talking with tech support for 2 to 3 hours trying all kinds of things they opened a ticket to have a technician checkout the local cell tower. The next day tech support called me and I told them it was worse. Then they had started looking at my past reports on "Mark the Spot" app and open several more tickets and had a crew checkout the area.
I received a call two days later and they had two bad cell sites. With the next day being Saturday they had the whole weekend scheduled as an outage to fix the problems. By noon on Saturday everything was great.
I even checked out my download speed using a few speed apps and I was pulling 2-3 Mbps down and pushing 1+ Mbps up.
I think the update exposed a serious problem that had existed for a while.

HP Photosmart C6300 printer/scanner not working after Snow Leopard install

HP Photosmart C6300 printer/scanner not working after Snow Leopard install
Reinstalling etc does not work - does anyone else have the same problem or a clue as to how to fix this?

Keith,
I got a C6280 and the scanner does not work anymore. I am for 6 days in contact with HP. The last printer driver install form the apple web site does not open the image of HewlettPackardPrinterDrivers.dmg because of an invalid checksum. The skipping of the validation gives and error in the install.

HT3917 My apple wireless keyboard is not working after new batteries installed

My apple wireless keyboard is not working after new batteries installed.

Do you get a steady green light to say there is a connection. If not, are the batteries the right way round. Do you have a monitor to tell the batteries strength. Is there a reading. Are the batteries good quality ones, Duracell, Energiser or Apple rechargeables.

Touchsmart 320-1030 Touchscreen is not working after OS re-install

HDD crashed, and was replaced with new, re-installed system from factory recovery CDs, now touch screen does not work. I have re-installed the drivers to no avail. system Properties says under Pen and Touch: No Pen or Touch Input is available for this Display. It used to work before the hard drive crashed. Is there a setting in the BIOS? or something else I may have missed?
Thanks

Hello @ncmich2,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I have read your post on how the Touchscreen of your desktop computer is not working after replacing the Hard Drive, and I would be happy to assist you in this matter!
To re-enable the touchscreen features on your computer, I recommend re-installing the original software and hardware drivers that first came with your computer. This can be done by following the steps in this document on Using Recovery Manager to Restore Software and Drivers (Windows 7). To update the newly installed software, please follow this resource on Using HP Support Assistant (Windows 7).
Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Flash Player not working after CS3 install

I just bought a new iMac and Adobe CS3 web premium software yesterday. I installed on the new iMac, then installed the software on my 1.5 year old MacBook Pro. On the laptop everything seems to be working fine, except the Flash player won't work when browsing on Safari or Firefox. I tried numerous downloads and installs in every way possible, but still not working. Is this because the MacBook Pro is running 10.4.11 and the Flash Player may have been built for 10.5? Please advise how to get Flash working in the browsers again. Thanks!

Seems a common problem...
http://blog.psyrendust.com/2007/12/14/adobe-flash-player-plug-in-installer-gives -error-on-mac-os-x-error-creating-file-10085-5000-access-denied-error/
http://support.dataviz.com/support.srch?docid=13157

Flash Player not working after updating to 10.2 - Plz help - my research project is on hold now

I updated my flash to latest version.. Everything gone.. Flash is completly not working now. I cannout see any youtube videos or any flash websites.
I tried all the way possible to troubleshoot it. But failed. Still not working.
My OS - Windows 7 - 32bit
IE - 9 (latested) 32bit
Flash Vesrion - 10.2 (Latest)
I tried all the ways mentioned in this case: http://forums.adobe.com/message/3145974
I have even removed teh compatible flag - such that to remove kill-bit, Still dint work.
I see that eventhough i install in my IE manage addons i dont find any flash player or shock player to enable or to disable. .its completly not there.. Its very strange.
I am using kasperky Pure. I could not figure out is there any option in kaspersky pure to disable ads block/popup.?
Please help. I am not able to understand what is the problem.
I have even noted some times automatically the flsh sites and youtube gets working after some reboot. But if i reboot again same problem.
I have tried installing and uninstalling several times. Even rebooted. But nothing works.
Please not i am not gettting any flash player addon options in my IE but i get the add on option in my Firefox which shows enabled. But still I have a doubt - what exact name of add on would be in FF. even in google chromes its not working. It says it has inbuilt Flash player.
Please help me to rectify it. My research project is getting pending with this issue. Please help me to rectify it as soon as possible. Please.

I am using Windows 7 - 32 bit. and the IE - 32bit.
I have tried all the uninstalling and installing procedure. But it did not work for me.
In my first post I had told that i was not getting any Addon in my IE. then i figured out when i click show all add-ons, then i see a shock player addon in my IE of the lastest verion 10.2. So please negelct that fact . I have an addon too in my IE 9
But nothing works.
When I go to the link you have provided. : http://www.adobe.com/software/flash/about/
Please note: (all the below browsers are very latest versions)
In chrome - See nothing (place is white)
In IE 9 - See nothing (place is white)
FF - See nothing (place is white)
when i right click on that place i get only 2 options:
1. Movie not loaded....
2. About Adobe Plash Player 10.2.152.26...
Even when i open the youtube. the video portions are blank. n when i right click on it shows the above same 2 options.
Kill-bit - when i checked it, i had a Compatible flag - but its values where all zeros. Still i deleted it. (So i do not think that was an issue)
These are the files I have in my - C:/Windows/System32/Macromed/Flash/
Flash10m.ocx
5.9 MB
2/14/11 6:59:34 PM
FlashInstall.log
3.7 kB
2/14/11 6:59:39 PM
flashplayer.xpt
856 B
2/14/11 4:46:06 PM
FlashUtil10m_ActiveX.dll
304 kB
2/14/11 6:59:35 PM
FlashUtil10m_ActiveX.exe
229 kB
2/14/11 6:59:34 PM
FlashUtil10m_Plugin.exe
229 kB
2/14/11 4:46:06 PM
NPSWF32.dll
5.8 MB
2/14/11 4:46:06 PM
I am using Kaspersky Pure.
I have even checked everthing is fine in my Internet options- Security tab
1. Internet -
Security level for this zone - Medium-high (Custom level - Scripting=enabled)
2. Local Intranet -
Security level for this zone - Medium-low (Custom level - Scripting=enabled)
3. Trusted sites -
Security level for this zone - Medium (Custom level - Scripting=enabled)
Furthere - Uninstall programme shows as follows : (Kindly have a look)
Further - My knowledge - I do not have any adblock or adblock plus. I only suspect if Kaspersky Pure, if it has an option to block it. (I am not aware of it).
Further - In my Chrome Plugin i see like this : I have a doubt here- Why i have 2 shockwave flash versions?
I even tried disabling them one at each time alternatively and tried if youtube works - still same problem.
I am suspecting might be quick time could have generated this problem. i had recently updated the quicktime. But when i checked in the help forum I got to know that quick time can cause problem, so i completly uninstalled it now. I do not have quick time in my system - but still the probelm was same.
Please help.

Keyboard and Touch-Pad Not Working After Having to Install New Hard Drive

I had to install a new hard drive in my HP Pavillion DV9700t that has Vista Home Premium 64-bit. After going through the recovery process with backup disk the built in keyboard and touch-pad do not work. During the installation, an error message came up saying something along the lines of "the drivers are not supported by this verison of windows because they are unsigned." The drivers that had that error were "hpqkbfiltr keyboard filter driver," "HP remote control HID Device," and "hpqkdfilter driver." I tried to update the drivers for the keyboard from the hp website, but the keyboard and touch-pad still do not work.
My question is, where do I find the digitally signed drivers for the keyboard and touch-pad that Vista won't flag and disable?
Help please!

Sparkles,
Thanks for the suggestions.
When dealing with MS Fix It, I was choosing run. Upon further investigation on that site, there really isn't a scan that applies to my issue anyways I tried the .NET Framework repair tool, and that seemed to work. It told me to try re-running what I was having issues with, so I tried running the Windows PowerShell again, but again was faced with the following message "windows update standalone installer encountered an error: 0xc8000247." I went back to the .NET screen and hit "Next" because it didn't work, and that responded by saying they were going to submit logs to Microsoft. I won't hold my breath on that one.
I'm to the point where I honestly don't care anymore. I have no idea what to do, because doing a clean install with the discs HP sent me isn't going to help because they are just recovery discs, and not an actual Windows disk. This is the second hard drive I have had to put into my laptop and use those recovery disks on in the last 3-years. The built-in keyboard hasn't worked during that time frame on either hard drive. I don't think the recovery disks I was sent install properly. Not sure where to go from here. I spent way too much money on this laptop years ago having it custom built to handle all of my drafting programs, so I don't want to just kick it to the curb. I was looking into the possibility of just replacing it, but I cannot stand the Windows 8 interface.
I guess I should have fixed the issue with the keyboard on this hard drive before loading all of my programs. Between the recovery disk install, formatting of the hard drive, and installing all of my programs it took well over 12 hours. Not really looking forward ot that again Then there's shockwave and flash and all of the other goodies that my recovery disks won't restore anyways.
Sorry if this seems like a negative post, but I'm just tired of trying to no avail. Maybe I should just take it somewhere to get it looked at, but I can't see them being successful if the recovery disks won't help anyways.
Thanks for you help,
MadBuch

Flash player not working after upgrade

I recently upgarded flash player on my mac os 10.6.8. Safari 5.1.10 After the upgrade videos will not play. Is there a way to get older versions of flash player?

Flash Player 12 works just fine with Snow Leopard. I have it on my server machine. No problems at all in Safari, Opera, Firefox.
Give it a "clean install" to make sure you've gotten the old plug-ins out and that the new ones are "allowed" by Safari.
How to perform a "clean install" of Flash Player in Mac OS X

Adone flash player not working after upgrade

I have Windows Vista, but using IE 8, 32 bit, I was keep on getting upgrade pop ups, got sick of it and upgrade to new version 11, since than flash player is not working. In youtube, just black screen.
I unistall through adobe website.
restart
close all all browsers.
install again, no luck.
Active X is enable in IE.
internet options, security level is Medium.
In manage add ons, shockwave flash object is there and enable, shockwave Activex is there and enable, Java plug ins are enable.
remove Firefox, and tried all steps
C:\windows\system remove flash folder
Start, Explore, remove flash folder from Adobe and Macromdedia
delete, restart, install, no luck
delete, restart, install 10.3
no luck
also I save adobe flash player 11 and 10.3 on desktop and run from there.
(One thing I did notice that I open IE 32 bit to install, when I try to unistall from adobe site for 32 bit, it tells me to use 64 bit unistall, when I use 64 bit, it will unistall the adobe player, but if I check IE 64 bit, there is no shockwave flash object and shockwave ActiveX control, but they do exit under IE 32 bit after installing)
Who is the genious, who can guide me in the right direction. I am missing one step, somewhere.
At this point I do not care about flash player 11, I just want flash player to work, even 10.3.
also CPU P8400 @ 2.27GHZ, do I need better processor to run 11?
ram 4gb

Vista is 64 bit, IE is 32 and 64, uptil now, I was using 32 bit.
Last night I tried to download flahplayer for 64bit flash player from your link in the FAQ, since it will add flashplayer for both 32 and 64bit, also did not work, any advise will be appreciated.

Flash still not working after enabling it on windows 8.1?

I followed the instructions on the help section and enabled flash, however it is still not working. I then tried to download it and the page takes me to the instructions on how to enable it.
I have just bought a new laptop and it is fully updated with 8.1.
Any help would be appreciated.

Flash Player is actually built into Internet Explorer on Windows 8 and 8.1. There is nothing for you to download or install from Adobe.
From the description of the problem, it sounds like you're going to a website and getting a message that Flash Player cannot be found.
On most sites, there is JavaScript that determines what version of your browser and Flash are installed, so that it can determine what content to show you. In Internet Explorer 11, Microsoft changed the string that identifies Internet Explorer to those scripts, and it's very likely that the website you're visiting needs to make adjustments to accommodate the change. There will probably be a bumpy transition period as major web properties notice the problem and fix it.
In the meantime, Mike's suggestions are good. Use Compatibility Mode or an alternate browser. You may also want to contact the website (particularly if they're a small shop) to let them know about the problem. You're on the early end of the adoption curve, and they might need a head's up.
Thanks!

Flash Player not working after downloading new version

I downloaded Flash Player 10 and it does not work.I am using Windows XP and Internet Explorer. I have tried the trouble shooting. I have made sure its enabled under Active X and it does not work at all now. I have tried to download Flash Player 9 and now that will not download. I regularly use site that require Flash and I am shut down until I can figure out what is wrong. Please help.

I have the same issue after I was prompted yesterday to upgrade my Flash player. With the new version, 2/3 of Flash pages do not work. But 1/3 do work !
Example of page that does not work with new version of Flash :
http://www.youtube.com/ (the whole site)
http://www.adobe.com/fr/products/flashplayer/ (Adobe's official Flash page !)
Example of page that does work with new version of Flash :
http://www.voleursdechevaux.be/page_flash.html
On first glance, I would say that Flash loaded through JavaScript fails. Only Flash embedded through HTML works. But I am not competent enough to discover why.
Here is my current configuration (the version test at http://kb2.adobe.com/cps/155/tn_15507.html works well) :
Player Version : WIN 10.0.22.87
Debug Player : no
Operating System : Vista
Browser : Internet Explorer 8
Locale : French

Flash player not working after doing the update

I got an update on facebook saying that I needed to update my flash player. so I did, and now it keep saying that I need to update when It already shows that it is the updated version. now I cannot do anything that involves using flash, no facebook or online games or utube. please anyone if you can help me figure this out.

Recently, my games on Facebook and Youtube stopped working and prompted me to upgrade my flash player.
It included the link to Adobe, as do all the sites that require it.
So, I did. It says install successful, but it is not.
I use Safari on a Mac 10.5.8.
The flash player is still working on FireFox.
I tried many things so far and it is still down on Safari.
I tried upgrading from the internet.
I tried rebooting a flash player from my Creative Suite 4... that actually told me my disc 2 was blank during install!
I uninstalled flash player and reinstalled many times. No go.
I uninstalled my Flash program and nearly lost it!!
It would not reinstall from my CS4 discs.
A friend helped me and I am pretty sure the Flash maker is up again. I see the icons are back in place in the applications folder, but i did not try running it yet.
He thought the flash player was working again when he returned my computer, but it is still not working in Safari.
I tried downloading and reinstalling the flash player again from Adobe, yes..the correct version for Intel based Mac.
He ran first aid repair a few times.
There was a lot of things that got fixed.
I am in need of more help.
anyone figure this out?
please!

Flash Paper not working after IE7 Upgrade

Hey All,
I am running CFMX 7.02 that uses flash paper to print out
result pages. Everything has been workiing great until I just
upgraded to IE7. When I click on my print links the flash paper
pages open up blank. I can change the format to PDF and it works,
but I am concerned that many of my users may not have the PDF
softrware installed. Does anyone know what may be causing the
problem? I can open up these same pages on a machine that runs IE6
with no problems.
TIA
Tobin

Please ignore, I found the solution in a previous posting.
Thanks,
Tobin

Siri does not work after IOS 7 install

Siri doesent work after I OS 7 install I hear it is a hardware problem. Siri works fine but then you download IOS seven and it stops working. Apple has told a couple people they have to buy a new phone. I hope thats not true. Because I will buy a new phone but it wont be apple if thats the case.

Hello, Dan.
Thank you for visiting Apple Support Communities.
I would recommend going through the troubleshooting steps in the article below when experiencing issues with Siri.
iOS: Troubleshooting Siri
http://support.apple.com/kb/TS4079
Cheers,
Jason H.

Flash Charts not working after 3.1 install

Similar Messages

Maybe you are looking for