Flash choppy unless using mouse

Hey guys, new to the forum here, but I have looked everywhere else.
I am having an issue on a few brand new PCs where when I try to play a flash game or video, the video is very choppy, even though the audio continues on fine. But if I move the mouse around the video is fine. I have checked a lot of places on the interwebs and a lot of people are having this problem but no one is offering a real solution. I have updated flash to the newest, even went on and got the beta version from adobe labs and still no dice....Any ideas?
Thanks
Lamar

forgot to mention, I am using XP, one PC has ATI video, one is a netbook with intel onboard graphics, and another is a laptop with Intel onboard graphics. All have 2GB RAM.

Similar Messages

Usb mouse auto disconnect time and time,Screen flash and flash when I use discrete graphic card

as title
My usb mouse auto disconnect and reconnect time and time,
no one knows when the mouse will disconnect,but every time when that mouse disconnect ,it will be reconnected in 2-5sec.
Screen flash and flash when I use discrete graphic card with the battery or use AC when connect the external display with VGA CABLE.
Mouse: Logitec G400/G1
Display:Lenovo D2081WIDE
machine:T430 2349 CTO

system info:
machine TYPE: THINKPAD T430 /2349CTO
operating system :Lenovo OEM ultimate X64 SP1
mouse type:Logitech G400 and Logitech G1
time:from 2012-10 to now
threat NO.1
USB mouse auto disconnect and reconnect time and time,no one knows when the mouse will disconnect,but every time when that mouse disconnect ,it will be reconnected in 2-5sec.
every time when the mouse disconnect I heard the sound which like USB DEVICE unplug,and when it reconnected I heard the sound which like USB DEVICE plug in.
threat NO.2
Screen flash and flash when I use discrete graphic card with the battery or use AC when connect the external display with VGA CABLE.
threat NO.3
the battery auto losing capacity!!!!!!
1% everyday about 0.2Wh
since I bought to now,
the Design capacity has losing from 57.XX Wh to 47.52Wh
and full charge capacity is 48.68.
the battery info:
cycle count is 18
Bar-Code number 1ZKFD27S1RF
SerialNumber 1896
First used date 2012-09
FRU 45N1001
Firmware 0003-0080-0100-0165

How to use Mouse Wheel Events

Hello Everyone
I am using Datagrid in my Canvas.
I use mouse wheel to scroll the datagrid. But in one scroll
through that wheel make the more than 4 rows to be scroll.
So Now my requirement is to control the delta value of mouse
wheel event and how to use that with my datagrid so that i will
able to scroll one row through mouse wheel scroller.
Thanks

please give me some suggestion around it.
I want to scroll one row of datagrid with per mousewheel
scroll. I am not getting how to use the scrollMouseWheelMultiplier
property of the IConfiguration class because i am not able to
create the object of this class.
I am using the Flex 3.0 and flash 9 version.
please help me out around this.

Why do Sony DSC-RX100M3 raw files look strange in PE9 when flash has been used in the shot?

I have just bought a Sony DSC-RX100M3 camera and use it to shoot raw + jpeg. I want to use the raw files in my Photoshop Elements 9, which has the Camera Raw plug-in version 6.5.0.216 installed. I have downloaded the Adobe DNG converter version 8.7.1.311 so I can import my Sony raw files into PE 9 as they cannot be used directly. Most of the time these raw files look OK, but when I use the flash on my camera and then look at the raw files in PE9 they look far more pink than the corresponding jpeg files. The jpeg files look more or less as I remember the scene when I shot the picture.
When I look at the same raw and jpeg files in Sony's own Image Data Converter software (version 4.2.04.17270) the raw and jpeg files look very similar to one another, and there is no pink colour cast in the raw file.
What am I doing wrong in Photoshop Elements? I though the DNG converter keeps all the information from the original raw file and makes no changes to it, so why does the raw file look so different when flash has been used?
Thanks for any help you can give!
AVM

Looking at the pictures of the camera online, I'd say there is no lens shade--a device to keep light from the sides from causing lens flare--and the camera lens, itself, was just too far extended and there was a lens shadow. You probably can't use the flash that close up and should back off and zoom in further. Experimenting would give you a sense of what situations will have a shadow of the lens or not.
Your ACR plug-in is old enough not use have Process Version 2012, yet, only 2010 and 2003 so Adobe didn't have the idea to put the selector down next to the camera profile. The toning options are better with Process 2012 so that would be a reason to upgrade, but I am not sure that the Camera Neutral profile in PSE9 would be different than PSE13. If Adobe changed the camera profiles then people's pictures would look different once they upgraded to a new version and that's not something that's supposed to happen.
You can certainly download the PSE13 trial and see if things look any different, but they may not: Download a free trial or buy Adobe products | Adobe downloads There would be newer minimum OS version requirements for the newer versions of Adobe software so check those out before trying to install, unless you're on Windows 7+ or OSX 10.8+ then it should be fine.
One more thing, the White-Balance tint is set to +10 by the camera:
This As Shot WB is more magenta and even when using the Adobe Standard profile, moving the Tint down to +0 makes things a little more green like your camera JPG. So there is more than just changing the camera profile that you can do:

Firefox won't load pages or process anything UNLESS the mouse is moving!

Ever since the latest Firefox upgrade (Firefox 4 I believe), my pages will not load unless the mouse is moving! It's very strange, but the moment I stop the mouse the progress of loading freezes, and the moment I move it again it will resume and continue for as long as the mouse is moving.
I've never experienced anything like this before. I've uninstalled and reinstalled, and that looked like it solved the problem, but then it came back a few hours later. It makes watching any videos impossible, or sometimes will keep playing the sound but freeze the video image until I move the mouse and the image catches up with where the sound is at. Every page I'm on I have to keep the mouse scrolling around in a freaking circle just to keep it from freezing!
I'm so disappointed as Firefox used to be perfect to me. Is there any solution to this out there? (or am I better off with Chrome...)

So after months of this ridiculous problem not improving after endless cache clears, reboots, safe modes, extension deactivations, re-downloads, and anything else I could think of, I lost my patience and switched to Chrome for good. This is the only effective and lasting solution I have personally found.

Scrolling using mouse in webdynpro applications

Is it possible to scroll using mouse in webdynpro applciations in portal? Currently we are not getting this functionality by default, although it is there in the BSP pages in portal.
Why is there a difference ?
Thanks in adv.

I agree - there should be no coding required. This is more a function of the Operating System and the Browser to map the actions of the scroll wheel. I experience the the same when I test for WDA. The scroll will scrolls the entire page unless focused on a table that has scrolling active. Then it scrolls within the table. However from a development standpoint I didn't do anything to make this functionality active in my application.

HI .. I have a new macmini 2.5 Ghz 10.7.3 Lion, had a problem today ,it froze so I could not shut down using mouse or tablet. used the power switch, when I tried to restart I got audible 'beeps' from it.

HI ....I have a new macmini 2.5 Ghz 10.7.3 Lion, had a problem today ,it froze so I could not shut down using mouse or tablet pen. used the power switch, when I tried to restart I got audible 'beeps' from it. I managed to restart it but kept getting a message come up on one ot the dual screens ' restart using the power swich to turn it off , then press it again to restart.'
This worked okay , but now it just keeps freezing whenever I start it up. I thought the issue could be my old Epson Expression 1680 scanner not being compatible , so I have unplugged it. I also had a look at the new memory I installed when I got it, but this seems not be the problem.
It is connected up to an Eizo Flexscan S2231W using a cable straight into the HDMI input , the other monitor is a small Acer using the VGA into Thunderbolt port.
When I turn the Eizo screen on first and then press the power button on the mac-mini, I hear the chime then the screen flahes the 'Digital no signal' message on and off for about 30 seconds , then the monitor comes on as normal. But it is still freezing up on me after using it for a while and I am having to use the power switch button to turn it off again.
Can anyone help please.

I really don't have an answer for that one. I guess that while trying to get things working correctly, I would use the most basic monitor I had which in your case would be the Eizon using the Thunderbolt port and adaptor.
When you boot into Safe Mode the startup is quite slow, but you should get the Apple logo and then the spinning gear below it (release the SHIFT key when it appears.) Then after a little more time you should see a gray progress bar appear below the spinning gear. When that disappears the computer will startup to a login screen.

When I try to play flash games it uses the wrong gpu

When I try to play flash games it uses my integrated Intel gpu not my dedicated Nvidia one. Other games use the correct gpu, however. Is there any way that I could possibly force flash to use the correct gpu? I can't change it through the Nvidia settings as it is apart of browsers and I can't change browser gpus.

Unable to find ANY GPU settings in Firefox.
I don't use IE or Chrome, so I can't say how to even check them.
Nvidia forums have NOTHING on forcing a browser to use a specific GPU, and I know Flash has nothing in settings to do it.

Embed flash file without using IFrame UI

Hi all,
Can any one tell me how i can embed flash file without using IFrame UI ?

Hi
To run a flash file you will definetely need a platform for which you need a shockwave player or a simple browser window. From webdynpro, the purpose of making it run through a IFrame is at runtime, the frame acts as a window for the flash file to run. Hence its the direct option of running it. Otherwise, you need to use a external window to invoke it seperetely in a browser window to run the file.
If you have any specific issues, do let us know, or else its the best option @!
thanks
sathya

How do I create an orange flash transition effect using Adobe Premiere CS6?

I am trying to create an orange flash transition effect using Adobe Premiere CS6 with my MAC computer.

Try this:
Add Cross Dissolve, cut and nest
Add a Fast Blur to the nest and tweak as in first screendump
Superimpose orange Color Matte and tweak as in second screendump
Make (fixed) effects into presets for future use.
Good luck.

Artwork doesn't transfer to my Kingston flash drive for use in my car.

I am transferring songs to my Kingston flash drive for use in my car. When I copy them from my folder and drop them in the flash drive the album artwork doesn't transfer. I deleted the artwork from the songs of 1 CD, saved a jpg to my desktop and added to each individual song which works but would be crazy to do for all of the songs. I am running ITunes 11.05.
I've looked in the communities but couldn't find anything about this. Is there a way to revert back to ITunes 10?

Placing your iPhone in the toilet was the correct thing to do but you should have purchased an android phone instead. That would have solved these issues. :-)

After las update some menus doesn't work properly. Ther is non possibility to use mouse. Why?

After las update (9.2.1) some menus doesn't work properly. Ther is non possibility to use mouse. Why?

Operating System?

Where is the "done" button in Flash CS4 when using Flash Builder 4's new flash component or container?

The documentation for Flash Builder 4 beta says that after opening flash from flash builder, I should click a "done" button in flash and flash should close and what I created in flash should be included as a component or container in Flash Builder. Using the Flash Builder 4 beta on Windows, when I click on the "create in flash" button on the properties panel for either the new flash component or container, Flash CS4 opens, I create something in Flash and no "done" button is present. Nor is anything present in the menus resembling a "done" option. Where is it?

Hi Jeffrey:
Still no done button. Now under commands in Flash I can convert symbols to flex components and containers and these show up in the Flash library.
Thanks:
Jim
Date: Wed, 30 Sep 2009 09:58:10 -0600
From: [email protected]
To: [email protected]
Subject: Where is the "done" button in Flash CS4 when using Flash Builder 4's new flash component or container?
Hi,
You may need to install FlexComponentKit.mxp to your Flash CS4 beforehand.
Jeffrey
Date: Tue, 29 Sep 2009 17:04:36 -0600
From: mailto:[email protected]
To: mailto:[email protected]
Subject: Flex Where is the "done" button in Flash CS4 when using Flash Builder 4's new flash component or container?
I apparently didn't get one. I've looked under various workspace configurations. Another thing that seems odd is that when Flash opens I get the opening panel that allows me to select the type of file and version of AS I want to use. I select new file with AS3. Any ideas on why the "done" button wouldn't be present and if the opening panel is what I should expect on opening Flash after clicking the "create in Flash" button?
>
>

[Fixed?] Cannot use mouse and touchpad at the same time after upgrade

Dell Inspiron 6400 laptop, Synaptics touchpad, external wireless USB mouse (Logitech).
Yesterday I did a full system upgrade which among other packages upgraded
[2007-11-08 00:06] upgraded synaptics (0.14.6-2 -> 0.14.6.99-1)
[2007-11-08 00:06] upgraded tzdata (2007h-1 -> 2007i-1)
[2007-11-08 00:06] upgraded xf86-input-keyboard (1.1.1-1 -> 1.2.2-2)
[2007-11-08 00:06] upgraded xf86-input-mouse (1.2.1-1 -> 1.2.3-1)
[2007-11-08 00:06] upgraded xf86-video-i810 (1.7.4-2 -> 1.7.4-6)
[2007-11-08 00:06] upgraded xf86-video-vesa (1.3.0-1 -> 1.3.0-5)
[2007-11-08 00:06] upgraded xorg-server (1.2.0-5 -> 1.4-4)
Before the upgrade, I was able to use both the touchpad and the mouse at the same time, using the following xorg.conf settings:
Section "ServerLayout"
InputDevice "Touchpad" "CorePointer"
InputDevice "USB Mouse" "AlwaysCore"
Section "InputDevice"
Identifier "USB Mouse"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "SendCoreEvents" "true"
Option "Protocol" "IMPS/2"
EndSection
Section "InputDevice"
Identifier "Touchpad"
Driver "synaptics"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
EndSection
After the upgrade, the touchpad was still working with these settings but the mouse wasn't. I then changed the xorg.conf settings as follows:
Section "ServerLayout"
InputDevice "USB Mouse" "CorePointer"
InputDevice "Touchpad" "AlwaysCore"
with the InputDevice sections remaining the same for USB Mouse and Touchpad. After this change the mouse was working but the touchpad wasn't. Finally, I changed the xorg.conf settings as follows:
Section "ServerLayout"
InputDevice "Touchpad" "CorePointer"
InputDevice "USBMouse" "SendCoreEvents"
with the InputDevice sections remaining the same for USB Mouse and Touchpad. This didn't change anything from the last setting: the mouse was working but the touchpad wasn't.
How can I restore the ability to simultaneously use mouse and touchpad?
Last edited by RobF (2007-11-09 20:20:54)

Try this:
Move "SendCoreEvents" to the Touchpad line (replacing the "AlwaysCore" bit) and then comment out the USB mouse. So in the end, it'll look like this:
Section "ServerLayout"
InputDevice "Touchpad" "SendCoreEvents"
# InputDevice "USBMouse"
EndSection
Restart X and see if everything is working right.
PS: You may also want to consider changing the Touchpad device line to "/dev/input/mouse2" instead of "/dev/psaux" as I believe psaux has been deprecated in kernel 2.6. I could be wrong, but I can tell you that /dev/input/mouse2 works great with the touchpad on my Dell e1505.

Is it possible to delete a plot with using mouse to select it on the graph control?

For example, when I use PlotLine to plot thousands of lines on the graph control, I want to delete some of them, but there is thousands of plotHandle generated.
How can I get the plotHandle of the specific line on the graph control with using mouse to select it?
If I record information of the lines, ex. the plotHandle and the coordinates, on a table or list, etc. , I have to compare the information of lines to get the plotHandle of the specific line.
Is there any user-friendly way to delete a plot by select it on the graph control?
Solved!
Go to Solution.

Sure! Look at the example located in \samples\userint\graphcursors for an example of how to accomplish this task.
Briefly:
The cursor must be in "Snap to point" mode
(To be confirmed) The graph must be in "Retain" data mode
You must have a callback for the graph control
You can use GetGraphCursorIndex to retrieve the plot handle
GetGrpahCursor retrieves values of cursor position in engineering units
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?

Flash choppy unless using mouse

Similar Messages

Maybe you are looking for