Flash class can not be loaded

Hi there,
this is the 2nd time I get this error, now I want to know
what's wrong: I have written a class that imports flash.geom.Point.
I can use this class in other projects fine, but for some projects,
it throws the error when compiling:
The class or interface 'flash.geom.Point' could not be
loaded.
with a reference to the mentioned class file.
What's this? Why it's working in other projects, but not in
these? As far as I can tell, the projects are not very different
from each other, they are different states branching off the same
basis project, but they do import different classes besides the
class mentioned. Probably some issues with the other imported
classes? A working projects imports a second class which also uses
flash.geom.Point; the failing project imports another class that
does not import any other classes. Can't see something wrong
here...
So, does anyone have an advice on this?
greets,
blemmo

well well... if you use Flash 8 classes, make sure to publish
for Flash player 8... d'oh.
blemmo

Similar Messages

  • Unable to publish projects with inserted video - error message The Flash video can not be loaded

    I've created a project in Captivate 6 with two slides that have inserted videos in them
    Both the videos were created in Captivate 6 by publishing those projects as mp4 videos
    They play fine in the previews but when publishing I get the error saying the Flash video can not be loaded for both of those slides and in the output files the area for the video is blank.
    I have checked that the videos are not open anywhere else as I saw on a previous post this was the issue but the only place they are in use is in the project I am trying to publish.
    Below are my settings and the error message
    Any suggestions would be greatly appreciated.

    Your screenshot indicates you are publishing to a folder on a network drive.
    Have you:
    Verified whether or not the video file exists at the published folder location? (It should ideally be sitting in the same folder as the SWF that calls it.)
    Verified that the folder location is set up as a trusted location in your Flash Global Security settings?

  • Flash video can not be loaded

    Using Captivate 6, when I make any changes to an already published project that contains flash video, upon republishing I get a pop up stating "The flash video can not be loaded. The output may not be proper."  It only happens when I make a change to a previously published project. Every time I encounter this problem, my only fix is to delete each flv and re-insert the video, and republish. Any ideas?

    Hi there
    You say it's intermittent. The bane of any troubleshooting.
    Have you asked your server peeps to get involved?
    Cheers... Rick
    Helpful and Handy Links
    Captivate Wish Form/Bug Reporting Form
    Adobe Certified Captivate Training
    SorcerStone Blog
    Captivate eBooks

  • Captivate 6 Video Issue: "The flash video can not be loaded. The input may not be proper"

    I've already published this particular project with multiple videos embedded with no problems in Captivate 6. I had to change one video and went to re-publish the project. Upon completing the publish, I receive an error message on EACH slide that has embedded video:
    "The Flash Video Can Not Be Loaded. The Input May Not Be Proper"
    There wasn't any issues with the project until changing the one video that needed to swapped out. I also tried publishing this in Captivate 8 to the same results.
    Specs:
    Windows 7 Pro
    Captivate Version 6.1.1.240
    Intel Core i5 25-20 CPU @ 2.5 Ghz
    4 GB RAM
    32-Bit Operating System
    If anyone knows why this issue has presented itself and how we can get around it, much would be appreciated!
    Thanks,
    Jon

    Hi there,
    Thanks for reaching Adobe Community. Please accept my apologies for the inconvenience.
    I am a little confused here. Are you getting this error while inserting a FLV video through Insert option or inserting a video through Video > Insert Slide Video or inserting a new slide?
    Re-linking means reinserting the video file. If you have already tried reinserting the video file, then have you tried inserting a different video?
    Also what operating system you have on your system?
    Thanks!
    Shekhar

  • The flash video can not be loaded. The output may not be proper

    Hi there,
    using CP7, I changed a couple of things on some slides and now I get the above message when publishing and/or previewing. I have search the forum and found others have the issue, but no answer how to fix it...?
    Anyone still getting this error?
    Kind Regards
    Rossco

    Hello....
    Can anybody help with this..?
    Cheers
    Rossco

  • ORA-29534 error for Class can not be resolved

    HI,
    I am trying to load and resolve a third party jar file which has some JMS classes. But while using the loadjava utility,
    "loadjava -u scott/tiger@dbname -r -v -genmissing weblogic.jar"
    i get "ORA-29534: referenced object <Class Name> could not be resolved" error for most of the classes.
    This Jar file has around 15000 classes definitions and it takes almost a complete day to load and resolve it. Even after taking so much of time it is unable to resolve all the classes and give a runtime exception Class can not be resolved for some class.( i have created the oracle java stored procedure successfully)
    I need a help on this very urgently...
    Thanks in advance....
    Sachin

    Sachin,
    There are many possible causes for the error you are getting, for example:
    1. The DBMS_JAVA package is corrupt.
    (Have you previously successfully loaded JARs -- or even java classes -- into the database?)
    2. A java version mismatch.
    (What Oracle database version are you using, and what java version is your JAR file compatible with?)
    You say,
    Surely they are loaded but not resolvedIs this a question, or a statement? Have you verified that the classes are loaded and not resolved? I use the following query for this:
    select DBMS_LONGNAME(OBJECT_NAME), STATUS
      from USER_OBJECTS
    where OBJECT_TYPE like 'JAVA%'The value for the STATUS column should be 'VALID'.
    I'm only guessing, but you may find more information (regarding the error you are getting) in the Oracle log files. Have you checked them?
    Have you tried searching the MetaLink Web site?
    http://metalink.oracle.com
    (Search for "ORA-29516", perhaps.)
    Good Luck,
    Avi.

  • Error - The registration of the service "User Profile Service" has failed. The user profile can not be loaded

    I am running an environment with an Active Directory and Terminal Servers.
    I have searched high and low for resolutions to this error but I cannot find anything related to my situation, let me explain further.
    The fixes I found are related to local users only.
    When I create a new user in the Active Directory I provide the paths to the profile folder in the "Remote Desktop Profile" and "Profile tab"  lets say for example \\ad001\home\%username% and \\ad001\profil\%username% .
    I give rights to the user to read/write the "home" folder which is mapped for folder redirection.  An I know that when the user first logs on it should create a "v2.%username%" folder upon successful logon.  This is when I am
    presented with the error message below:
    "The registration of the service "User Profile Service" has failed. 
    The user profile can not be loaded"
    Does anyone have any experience with this or know a suitable fix.  Again this is for the "Roaming" profile creation no local.
    Many thanks in advance.

    Hi,
    Thank you for posting in Windows Server Forum.
    Did you receive for any one user or for all users?
    Have you tried to solve the issue by fixing the user account profile?
    For that you can adjust the registry setting “ProfileImagePath” with
    particular SID of that user under below mention path.
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList
    Also if this can’t resolve the issue you can try to delete the SID of that user or renaming the old and and then check the result again by creating new profile for that users.
    More information.
    You receive a "The User Profile Service failed the logon” error message
    http://support.microsoft.com/kb/947215
    Hope it helps!
    Thanks.
    Dharmesh Solanki

  • My internet is on and I keep getting an alert window popping up saying the URL is not valid and can not be loaded?

    I don't know what more details I can give you except for what I indicated. I am online and a window will pop up indicating the URL is not valid and can not be loaded. Make it stop! That's all! Furthermore you should not limit people on the length of their question. How can they explain it ?

    Thats the annoying part! I have enough space and I'm putting things on a external hard drive and I keep deleting it off the computer.

  • The user profile service: Service failed the log on. User profile can not be loaded.

    I am running a Windows Server 2008 R2 domain. with 2 domain controllers.
    Every new account created in active directory does not seem to work. Even if the account it copied from one that does still work, it still gives the same error when logging in on a network computer (windows 7). "The user profile service: Service failed
    the log on. User profile can not be loaded."
    I have looked at http://support.microsoft.com/kb/947215, which unfortunately does not help. Especially since the SID is not there because the user has not managed to log on yet.
    The
    "Do not logon users with temporary profiles" Group Policy setting is not configured.
    And I have tried force replication too.
    I have exhausted all my knowledge.
    Please help
    Regards
    Phil

    It might be that the default user profile is corrupted. See that: https://helgeklein.com/blog/2013/09/error-message-explained-user-profile-service-failed-logon/
    This posting is provided AS IS with no warranties or guarantees , and confers no rights.
    Ahmed MALEK
    My Website Link
    My Linkedin Profile
    My MVP Profile

  • I can not up load a PDF file to my File Manager?

    i can not up load a PDF file to my File Manager?

    Hi there,
    You will need to provide way more information then that.
    How big is the file? What happens when you upload it?
    Do you have screenshots to show any errors you get?

  • Applet in ie 5.0: class can not be Instantiated

    Hi!
    My problem is an Applet, which works fine with the appletviewer and with my iExplorer 5.0.
    But when I tried to install my Application (the Applet is part of a J2EE-WebApp) on the tomcat of an other computer, I get the
    "class can not be instantiated"-Error and iE 5.0 only displays a grey box in the size of the Applet. With the appletviewer it works.
    I got the same tomcat, same mySQL and same browser on both computers.
    I also invoked the application running in tomcat on my computer from 2 other computers - on one of them, the Applet was shown, on the other, I only got this grey box.
    The version of the iExplorer was exactly the same.
    What can be wrong?

    Are you sure there is a static method in the Applet class named newAudioChip that takes a URL as an argument?

  • How do i get a radio station number from  down load the station tomy ipod, how do i get a radio station number from itunes it only plays on the computer i can not down load the station tomy ipod

    How do i get a radio station number from itunes it only plays on the computer i can not down load the station number as it does not show one to my ipod

    Which iPod? 
    iPod Manuals
    iPod Models

  • The MBean class could not be loaded by the default loader repositor

    Im trying to register a custom MBean to WebLogic 8.1 Sp5 Application Server but i get this error :
    The MBean class could not be loaded by the default loader repository .
    i have make a servelt that registers the Managed Bean i added the MBean jar file to the WAR file of the servelt and I added the Mbean jar file to the CLASSPATH in setEnv.cmd for the domain
    the code for the servlet is this :
    try
    Hashtable props = new Hashtable();
    props.put( Context.INITIAL_CONTEXT_FACTORY,
    "weblogic.jndi.WLInitialContextFactory" );
    props.put( Context.PROVIDER_URL, "t3://naiden:7001" );
    props.put( Context.SECURITY_PRINCIPAL, "admin" );
    props.put( Context.SECURITY_CREDENTIALS, "secret:)" );
    InitialContext ctx = new InitialContext( props );
    mbeanServer = ( MBeanServer )
    ctx.lookup( "weblogic.management.server" );
    logger.debug( "domain name e " + mbeanServer.getDefaultDomain() );
    catch( NamingException ne )
    error=ne.getMessage();
    logger.debug( ne.getMessage() );
    try {
    ObjectName objName = new ObjectName("isy:Name=NaidenStandardMBean");
    mbeanServer.createMBean("samplembean.Standard", objName);
    catch( MalformedObjectNameException ex )
    }

    You should use jre 1.5 or 1.6 for migmon from 7.10. It looks like your jre is 1.4.

  • Can not down load I0s7 due not enough memory on my iphone5  how can i free up more memory?

    can not down load I0s7 due not enough memory on my iphone5  how can i free up more memory?

    Or, do the update while connected to iTunes, which does not require extra space on your device, and in my experience seems to be a much more reliable update method anyway.

  • Your firefox profile can not be loaded. it may be missing or inaccessible

    i just updated my computer, after i did so, firefox wont open, it says your firefox profile can not be loaded, it may be missing or inaccessible. I have read every thread in here, and nothing works. i can't find the profiles.ini folder and i cant create a new profile. what to do now?

    A likely cause is a problem with the profiles.ini file and the profile marked as Default=1 in this file is no longer present on the hard drive.
    */Users/&lt;user&gt;/Library/Application Support/Firefox/
    *http://kb.mozillazine.org/profiles.ini_file
    You can use one of these to make Firefox create/use a new default profile:
    *Delete the profiles.ini file to force Firefox to create a new default profile
    *Use the Profile Manager to create a new profile
    *Use "Choose Folder" when you create a new profile to select the location of a lost profile and recover this profile
    *http://kb.mozillazine.org/Profile_Manager
    *https://support.mozilla.org/kb/Managing+profiles
    *http://kb.mozillazine.org/Profile_folder_-_Firefox

Maybe you are looking for