[Flash] Creador de pop up

http://www.flash-db.com/PopUp/

The security pop-up was first introduced with FP7. If you want to bypass it I can name two ways off the top of my head:
1. Regardless of ActionScript version (2.0/3.0) in the Flash authoring enviroment, in the Publish Settings dialogue box, the Flash tab, near the bottom choose Access Network Only from Local Playback Security.
2. Publish your movie as a projector. Both of these techniques will allow to "play" your swf file locally.

Similar Messages

Flash Player security Pop up when using camera and microphone.

Hello Friends
Can any body suggest me how to remove flash player security pop up for camera and microphone through coding.
Thanks in advance.

The security pop-up was first introduced with FP7. If you want to bypass it I can name two ways off the top of my head:
1. Regardless of ActionScript version (2.0/3.0) in the Flash authoring enviroment, in the Publish Settings dialogue box, the Flash tab, near the bottom choose Access Network Only from Local Playback Security.
2. Publish your movie as a projector. Both of these techniques will allow to "play" your swf file locally.

Built-in flash won't pop up

After removing my 550EX flash from my T2i camera, my internal flash will not pop up. When I go in to check flash settings for the built-in flash, I get this message: "This menu cannot be displayed. External flash is attached." Has anyone had this problem and what can I do to get my internal flash to pop up again?

Underneath the rails on your camera's hot-shoe there are some leaf-springs. Below one of those leaf-springs is a microswitch. When you slide an external flash onto the hot-shoe, it presses that switch down and that's how the camera knows there is an exetnal flash attached.
This switch can get stuck. Often times the leaf spring just needs to be teased up gently (e.g. use a toothpick or something and just gently nudge it back up.)
That will *usually* do the trick.
If you go to images.google.com and search for a term such as "canon hot shoe micro switch" you'll likely get lots of images showing the location of the switch and how to fix it.
Tim Campbell
5D II, 5D III, 60Da

Built in flash doesn´t pop up

Hello, I have an EOS Rebel XS camera. The built in flash isn´t opening and teh follow message appear:
" Error 05 The built-in flash´s auto pop-up was obstructed. Turn de power switch to <OFF> and <ON> again."
I´ve tryed several times with no results. Is there something else I could do before taking the camera to the Service?
Thanks a lot!
Pedro
Solved!
Go to Solution.

The pop-up flash has a tiny catch-hook which holds it down. When the camera (or a manual operation) wants to pop it up, a solenoid release the catch-hook and the spring should pop it up.
You shoul hear the clicking sound of the solenoid releasing the catch a few times before the camera gives up and displays the error message.
It means the pop-up flash is jammed... possibly a bit of dust, sand, or gunk is gumming it up so it can't flip up.
Using your fingers, gently pull up on the flash either while pressing the flash pop-up button or just pressing the shutter button in a sitaution where the camera would call for flash.
Once opened, you can use a bit of compressed air on the hinge points to see if you can clear the problem. You'll probably notice the hinge is stiff and doesn't pop-up on its own.
I have seen suggestions to use WD40 -- but frankly wouldn't get that stuff near my camera. If there is gunk, you could use denatured alcohold to dissolve whatever is gumming up the works. The advantage of the alcohol is that it'll evaporate on its own.
Tim Campbell
5D II, 5D III, 60Da

My flash player keeps popping up-help

my flash player keeps popping up - how can I stop this?

What do you mean by "popping up"?
Is it an update notification?
Is it an Internet Explorer notification (This site wants to load content using Flash Player)?
We need to know.
What browser?
What OS?

Update my adobe flash player keeps popping up I have tried installing and reinstalling I am at a loss.

update my adobe flash player keeps popping up I have tried installing and reinstalling I am at a loss.

Adobe Flash Player has to be downloaded, installed and aloowed.
    Allow Plug-ins
    Safari > Preferences > Security
    Internet Plug-ins > "Allow plug-ins"
    Enable it.

Nasty page flash on swf pop up in IE 7 - fix?

Go to
http://www.enhancedwireless.net/Technology/patentPortfolio.shtml
and rollover 71 Countries...
I know that it works on IE 7, but when you
rollover the "71 countries," the entire page has a nasty
flash to it as the
pop up is activated - in other words, the whole browser
window for a split
second flashes...that's not supposed to happen and doesn't
happen on any
browser except IE 7.
Would love a fix. Anyone?
KB

Thanks for reply - yes I know it pops up in IE 7, but only in
IE 7 there is an awful page flash when you rollover the 71
countries - very bad - the whole browser window flashes with a
strange flash for a split second - so how to fix this in IE 7?
KB

Nasty page flash on swf pop up in IE 7 only - fix?

Go to
http://www.enhancedwireless.net/Technology/patentPortfolio.shtml
and rollover 71 Countries...
I know that it works on IE 7, but when you
rollover the "71 countries," the entire page has a nasty
flash to it as the
pop up is activated - in other words, the whole browser
window for a split
second flashes...that's not supposed to happen and doesn't
happen on any
browser except IE 7.
Would love a fix. Anyone?
KB

Thanks for reply - yes I know it pops up in IE 7, but only in
IE 7 there is an awful page flash when you rollover the 71
countries - very bad - the whole browser window flashes with a
strange flash for a split second - so how to fix this in IE 7?
KB

Javascript in flash throwing IE pop up error

Im trying to open a new window in my browser from my swf
file. In my swf file i have this basic code:
on (press) {
getURL("javascript:NewWindow('/OutsideLinkWarning.cfm?ButtonText=Continue&LinkTo=http://ho me.clarkeamerican.com/www/reorder.cfm',
'Terms','590','350','no','no','no','no','no')");
When i click on the button when previewing the file in IE it
causes a pop-up error.
Other links throughout the site open a new window, leading to
the same page as the link above, using this code in the html page:
<area target="_blank"
onclick="NewWindow(this.href,'Terms','590','350','no','no','no','no','no');return
false;"
href="/OutsideLinkWarning.cfm?ButtonText=Continue&LinkTo=http://home.clarkeamerican.com/w ww/reorder.cfm"
a="" coords="3,219,166,245" shape="rect"/>
it works without any errors. Why would an error be thrown
through my flash swf?

The pop-up flash has a tiny catch-hook which holds it down. When the camera (or a manual operation) wants to pop it up, a solenoid release the catch-hook and the spring should pop it up.
You shoul hear the clicking sound of the solenoid releasing the catch a few times before the camera gives up and displays the error message.
It means the pop-up flash is jammed... possibly a bit of dust, sand, or gunk is gumming it up so it can't flip up.
Using your fingers, gently pull up on the flash either while pressing the flash pop-up button or just pressing the shutter button in a sitaution where the camera would call for flash.
Once opened, you can use a bit of compressed air on the hinge points to see if you can clear the problem. You'll probably notice the hinge is stiff and doesn't pop-up on its own.
I have seen suggestions to use WD40 -- but frankly wouldn't get that stuff near my camera. If there is gunk, you could use denatured alcohold to dissolve whatever is gumming up the works. The advantage of the alcohol is that it'll evaporate on its own.
Tim Campbell
5D II, 5D III, 60Da

Flash Player Update Pop Ups

Hi,
I have a MacBook Air bought on January 2014. it has the Mavericks operating system.
Since yesterday I can really surf the internet because everytime I open a Facebook, Youtube or Google page the page gets redirected to a FlashPLayer-Update Page, and a lot of pop ups appear. The message is "WARNING! Your Flash Player may be out of date. Please update to continue". I've read about the flashback trojan, but Mavericks isn't supposed to have problems with that. From what I read, the problem was fixex last year.
Do you have any ideas of what could be wrong?
It really is starting to get on my nerves... i cant do anything!!
Thank you so much for your help...
PS: sorry for the writing mistakes, if any. (english is not my native language).

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) on the advice of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
Copy a line of text in this window to the Clipboard.
Paste into the window of another application.
Wait for the test to run. It usually takes a few minutes.
Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s\n\n%s\n'; Fr='\nRAM details\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; AC="com.autodesk.AutoCAD com.evenflow.dropbox com.google.GoogleDrive"; H='^[[:space:]]*((127\.0\.0\.1|::1|fe80::1%lo0)[[:space:]]+local|(255\.){3}255[[:space:]]*broadcast)host[[:space:]]*$'; NS=networksetup; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -lq XML\|exec && echo $f; done; }; AT () { o=`file -b "$1" | egrep -v '^(A.{16}t$|cann)'`; Ps "${1##*/} format"; }; Pc () { o=`grep -v '^ *#' "$2"`; l=`wc -l <<< "$o"`; [[ l -gt 25 ]] && o=`head -n25 <<< "$o"`$'\n'"[$((l-25)) more line(s)]"; Pm "$1"; AT "$1"; }; Pm () { [[ "$o" ]] && o=`sed -E '/^ *$/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/(\/Users\/)[^/]+/\1-/g' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id -G | grep -qw 80; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed -n 's/^ *//;5p;6p;8p'; h=(`SP Hardware | awk '/ Id/{print $3}; /Mem/{print $2}'`); o=$h; Ps "Model"; o=$((h[1]<4?h[1]:0)); Ps "Total RAM (GB)"; o=`SP Memory | sed '1,5d;/[my].*:/d'`; [[ "$o" =~ s:\ [^O]|x([^08]|0[^2]|8[^0]) ]] && printf "$Fr" "$o"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; p=`SP Power`; o=`awk '/Cy/{print $NF}' <<< "$p"`; o=$((o>=300?o:0)); Ps "Battery cycles"; o=`sed -n '/Cond.*: [^N]/{s/^.*://p;}' <<< "$p"`; Ps "Battery condition"; for b in FireWire Thunderbolt USB; do o=`SP $b | sed -En '/:$/{s/ *:$//;x;s/\n//;/Apple|SMSC/d;s/\n.*//;/\)/p;};/^ *(V.+ [0N]|Man).+ /{s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;}'`; Pm $b; done; o=`pmset -g therm | sed 's/^.*C/C/'`; [[ "$o" =~ No\ th|pms ]] && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; [[ "$o" =~ =\ [^GO] ]] || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; fdesetup status | grep -q On && o=on || o=; Ps "FileVault"; a=(/ ""); A=(System User); for i in 0 1; do o=`cd ${a[$i]}L*/Lo*/Diag* || continue; for f in *.{cr,h,pa,s}*; do [[ -f "$f" ]] || continue; d=$(stat -f%Sc -t%F "$f"); [[ "$f" =~ h$ ]] && grep -lq "^Thread c" "$f" && f="$f *"; echo "$d ${f%%_2*} ${f##*.}"; done | sort | tail`; Pm "${A[$i]} diagnostics"; done; grep -lq '*$' <<< "$o" && printf $'\n\t* Code injection\n'; o=`syslog -F bsd -k Sender kernel -k Message CReq 'caug|GPU |hfs: Ru|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|timed? ?o|WARN' -k Message Ane 'SMC:' | tail -n25 | awk '/:/{$4=""; $5=""};1'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); n=$((${#s[*]}-1)); c="${s[*]}"; o=${s[$n]}%; Ps "CPU usage by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); n=$((${#s[*]}-1)); s[$n]=${s[$n]%[+-]}; c="${s[*]}"; o=$((s[$n]>=25000?s[$n]:0)); Ps "Mach ports used by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | awk 'NR>1 && !/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|openld|post[fg]|x)/{print $3}'`; Pm "Extrinsic daemons"; o=`launchctl list | awk 'NR>1 && !/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; o=`for d in {/,}L*/Lau*; do M; done | egrep -v 'com\.apple\.(CSConfig|server)' | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/StartupItems; do M; done`; Pm "Startup items"; sys=`pkgutil --regexp --only-files --files com.apple.pkg.* | sort | uniq | sed 's:^:/:'`; b=`sed -E '/^.+Lib.+\/Contents\/Info.plist$/!d;s/\/Info.plist$//;/Contents\/./d' <<< "$sys"`; l=`egrep '^/usr/lib/.+dylib$' <<< "$sys"`; [[ "$b" && "$l" ]] && { o=`find -L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo}* -type d -name Contents -prune | grep -Fv "$b" | while read d; do test -f "$d/Info.plist" || continue; ID=$($PB\ :CFBundleIdentifier "$_") || ID="No bundle ID"; printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find /usr/lib -type f -name *.dylib | grep -Fv "$l"`; Pm "Extrinsic shared libraries"; :; } || echo $'\nReceipts missing'; o=`for e in INSERT_LIBRARIES LIBRARY_PATH; do launchctl getenv DYLD_$e; done`; Pm "Inserted dylibs"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; i=`route -n get default | awk '/e:/{print $2}'`; I=`$NS -listnetworkserviceorder | sed -En '/ '$i'\)$/{x;s/^$.+$ //p;q;};x'`; n=`$NS -getdnsservers "$I" | awk '!/^T/{printf "not "; exit}'`; Ps "DNS (${n}from DHCP)"; o=`$NS -getinfo "$I" | awk '/k:/{if ($3 !~ "(255\.){3}0") print}; /v6:/{if ($2 !~ "A") print}'`; Pm "TCP/IP"; R && o=`sudo profiles -P | grep : | wc -l`; Ps "Profiles"; f=auto_master; [[ `md5 -q /etc/$f` =~ ^b166 ]] || Pc $f /etc/$f; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; f=/etc/hosts; Pc "hosts" <(egrep -v "$H" $f ); AT $f; Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; LD="$(`find /S*/*/F* -type f -name lsregister | head -n1` -dump)"; o=`for ID in $AC; do [[ "$LD" =~ $ID ]] && echo $ID; done`; Pm "Application check"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed -E 's/(\..*$|-[1-9])//g'; o=`find ~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $ | wc -l`; Ps "Restricted user files"; cd; o=`find .??* -type d -name *.app -prune`; Pm "Hidden apps"; o=`SP Fonts | egrep 'id: N|te: Y' | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} file count"; done; o=; [[ UID -eq 0 ]] && o=root; Ps "UID"; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Flash Player update pop-up problem

When I turned on my desktop tonight, there was a pop-up from Adobe about downloading a new (update) download for Adobe Flash Player. I've seen these before and always clicked on them.
After the download I had to go to SpeedTest site and when I went to the site, it mentioned that I needed at least Flash Player 8 to run the program (I knew I had Flash Player 10 installed). I've always been going to this SpeedTest page before with no problems. I remembered I just downloaded the new update for the Flash Player and I went into my Resotre Point, which was done (luckily) this afternoon. I restored my system and when I went back to the SpeedTest page, I was able to run the speed test.
Would anyone know what might have happened?
(BTW - #1- If I ever wanted to uninstall Flash Player, how would that be done? I don't see it in Add/Remove programs. #2- Is there a way to send a support/technical question to Adobe re: Flash Player?)

Flash Player (Plugin or ActiveX) should show on Add/Remove Programs; I don't know why it doesn't on your system.
To uninstall it anyway, you can use the uninstaller from http://kb2.adobe.com/cps/141/tn_14157.html; make sure that all browser windows are closed when you run the uninstaller.

How do you load a URL in .exe flash file without popping up in new window.

Hi
I have developed a full screen .exe flash file in actionscript 2. It controls physical lights (e.g. turn on and off) by simply calling a URL for each action. However, I don't want the called URL's to open in front of the interface. Is there a way to call a hidden URL in flash? Any advice would be much appreciated.
Thanks

Hi Daz
Cheers for getting back to me. Each light is controlled by calling a URL e.g.getURL("http://modelpc/LightControl/controllights.aspx?id=17&status=on");
Currently the code looks like this:
on (release) {
getURL("http://modelpc/LightControl/controllights.aspx?id=1&status=on");
The action is working when I use get(), but the URL pops up in a new window. I want to prevent this from happening. I am looking into using send (LoadVars.send method) at the moment...would this work? I have little experience with actionscript and its prooving to be a challenge.
Thanks

Flash Player Settings Pop up window

I just found the "Flash Player Settings" on a live SWF file.
A little pop up window that appears when you right click on an
online SWF file.
Can someone tell me what this function is for?
Security?
Cookies?
Browser Detection?
There seem to be controls for allowing someone to access
functions on the user's computer. Storage space, microphone,
camera. Is that correct?
The online documentation is a little vague on why it's there
and what it can actually do. Either that, or I'm not advanced
enough in Flash to understand what they are describing. (probably
the latter)
But my client discovered it in a small slide show I added to
their site. I had never seen it before, but I work primarily on a
Mac and the usual alternative to "right clicking" (control-click)
doesn't produce the little pop-up window. This seems to be a PC
only thing.
I don't think they had ever seen this function before either
because it alarmed them, and they want to know if I can turn it
off.
Is that possible? If so, how? Perhaps when it's being
published?
If not, is there anything I can say to assure them that it's
harmless - if it is, indeed harmless.
The slide show was created using Flash 8, and published to
detect Flash Player 7, with a "Flash Only" HTML template.
Thanks.

Flash Player Settings are for the user to control access of
Flash movies to the camera, "Flash Cookies" (storage), microphone
and global for where these are prompted or asked for access.
More details at
http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager.html
They can use this to "turn off" any access to camera, Flash
cookies and microphone for all Flash movies including yours.
But they should think of it the same way as the Tools More
Options in IE -- where they control the player security requests.

Adobe Flash Player Security pop up during installation.

Hello, I recently purchased a macbook this week. My first apple computer. I was downloading and installing a widget, astroids, through apples website and after installation I noticed a dialogue box appeared. It said "Adobe Flash Player Security" as the title and then it showed where the downloaded file was located. I looked in the folder where it said it should be located but nothing was in that folder. I couldn't close the message box, it just stayed their with my mouse pointer doing a circular pattern. I eventually restarted my computer because I didn't know how to get rid of it. My question is should this be something I should be be worried about? Is everything ok with my macbook? Sorry if this sounds silly, I am new to owning an apple computer and trying to get familiar with it. Thank You.

For the Flash Player stuff, start with http://www.adobe.com/products/flashplayer/articles/localcontent/
After sorting that out, see:
Switching from Windows to Mac OS X,
Basic Tutorials on using a Mac,
Mac 101: Mac Essentials,
Anatomy of a Mac,
MacTips, and
Switching to the Mac: The Missing Manual, Snow Leopard Edition.
Additionally, *Texas Mac Man* recommends:
Quick Assist.
Welcome to the Switch To A Mac Guides,
Take Control E-books, and
A guide for switching to a Mac.

Flash link results pop-up, but not online

Hi there,
Hope someone can help me with this because I'm pulling the
hairs out of my head.
I have a XHTML page with 2 iFrames, 1 frame named 'topframe',
the other named 'bottomframe'.
When I create a .swf file in Flash CS, embed it in
'topframe', and it has an link to open up 'test.html' in
'bottomframe',
and I test this out on my Dual core Intel Mac (OS X.4.9), the
'test.html' file doesn't open in the bottom iframe but in a blanc
new window.
Now here is the odd thing, if I upload everything to my site,
and then test it out, it works, and 'test.html' does open in the
bottom iFrame.
Any idea what is going wrong here? It's very frustrating to
work this way.
Rick

OK, found it. I needed the mm_css_menu.js file uploaded.

[Flash] Creador de pop up

Similar Messages

Maybe you are looking for