Flash CS3 and Web Services (again)

Ok, I'm sorry to be going on about this... I've seen the
question asked before, but I am yet to find an answer.
-I just noticed that the Web Service Connector targets only
AS2. Along with several other components.
I was hoping to find CS3 working BETTER with web services, as
an example I kind of hoped that the long awaited feature of being
able to consume a .NET dataset would be there... But instead there
is absolutely nothing.
So, if the Adobe plan is to say "Ok, you want to hook up to
web services? -Get Flex!" - well then I'd appreciate knowing about
it.
Or, if the plan is to release hot, lovely, fresh components
for CS3 to do this - I'd SURE like to know about that!
Not knowing what to expect is stupid. Decisions on future
projects need to be made. I Don't mean to scare you Adobe guys but
..."Silverlight"... ;-)
So, if anyone has anything on this (CS3 data components/web
services that is) I'd very much appreciate hearing about it.
Thanks!

JSON is undeniably useful. It's a great way to get data back
and forth, but SOAP is a standard in almost all programming
languages now and JSON isn't native in flash (not slagging it, it's
just not native).
<gettingonasoapbox>Webservices are one of the greatest
tools available to web application programmers and one of the best
innovations in web development in the past 5 years.
</gettingonasoapbox>
I've built a number of large scale flash applications based
off of this ridiculously simple protocol and to make the switch to
JSON (that's not supported natively) just to use AS3 is a fairly
large endeavor especially since AS2 is not really "bad". Plus,
webservices have been a constant in the past TWO versions of flash.
It's hard to see that it would be an oversight to leave it out. It
feels deliberate, especially without any explanation as to it's
mysterious disappearence.
The message this gives to us Flash developers is that Adobe
will change it's product without warning, explanation, or even
deprecating the class, and that you must adapt to a new product
(Flex). However, who's to say that Flex will not be changed as
well? AS3 has been around for a long time at this point, so I don't
think it's a matter of time.
The small component pack is understandable for the initial
release with a later update, but it appears that there is not going
to be a tree view component for AS3. In the newest version of Cold
Fusion, they switched the tree component to an ajax control instead
of a flash based one.
http://www.forta.com/blog/index.cfm/2007/6/5/ColdFusion-Ajax-Tutorial-5-File-System-Browsi ng-With-The-Tree-Control
I don't want to be a complainer or a luddite, but I just
really realy really really really really want to use AS3 :) No
webservice class is a total showstopper and will quickly turn flash
into just an animation tool instead of an RIA development tool. You
can't continue to build applications on a protocol that ceases to
be supported.
Then again, maybe I'm a minority in the developer group.
Maybe if we Digg this thread and maybe Adobe will take
notice.

Similar Messages

Transport Webi Reports and Web services as the backend of dashboards from BO Production to BO Development system

Hello Experts,
I am working on SAP BO 4.1. I have made several dashboards on top of web services ie;Web Service Method. I have 2 systems in BO ie; Development and Production Systems.The BW production system is connected to BO Development and Production both.
The Webi reports are made on top of BI BEx Query. From the webi reports, BI Web Services are made on top of which the dashboards are made further.
The Webi Reports, Web Services and the Dashboards everything is made directly in BO Production.
My question is, Can I transport the Webi Reports and the Web Services from BO Production to BO Development?
And If yes, will it have any other impact on webi reports, web services or dashboards?
Thanks & Regards,
Alfred Thomas

Hi Gill,
As per your reply,with the promotion managament i have make the web services again manually in Dev system...Right?
Is there any way possible that i can transport the webservices and the webi reports usind Query AS A Web Service Designer. And if yes, through this QAAWS will the WSDL or the URL required for the web services in the connection button in dashboards will automatically updated or changed as per the Development System?
But i am not able to enable the "Deploy to Other servers Option" in QAAWS.
Can you please help?
Regards,
Alfred thomas

Custom Portal Services and Web services

Can you please tell me what exactly are "custom portal services" and "web services" with a business like/ real life example?
How do you go about developing deploying and utilizing these services in Portal?
Thanks.

Hi navin,
Thanks for the par file.
Duly awarded points.
I need your help again.
I wish to use the method
public String getWelcomeString(String name)
in my own portal application to test usage of portal services.
So I uploaded your par file on my server.
Then I added the api and core jar files which came along with your par in my project as external jar files.
I imported com.wickes.WickesService.*;
Next, to use the service I coded:
IPortalRuntimeResources rs =
PortalRuntime.getRuntimeResources();
IWickesService ws = (IWickesService) rs.getService(IWickesService.KEY);
But now I am stuck and I dont know how to proceed.
Please help.

Apex and web services

Hello everyone,
I've started looking into SOAP and web services, and have used Tyler Muth's tutorial to email and FTP BI publisher reports using APEX.
I was wondering if it is possible to create an on-screen report (i.e. an interactive report) using a web service?
I've managed to return values to form fields using web services...I was always under the impression, from before I looked at web services, that creating an on-screen report using data from a web service was one of the main things you could do....
Please could someone let me know if this is possible, and roughly how you'd go about doing it?
Thank you in advance.
Robin

Hi Robin,
I think I have implemented the same thing which you are trying to do
The followinf is the response of a web service from BI Publisher. You can check the response using the statement
select clob001 from wwv_flow_collections where where collection_name = <name_of_the_collection_u_specified_while_sending_the web_service_request>
<getScheduledReportInfoResponse xmlns="http://xmlns.oracle.com/oxp/service/PublicReportService">
<getScheduledReportInfoReturn xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="ns1:JobInfo" xmlns:ns1="http://xmlns.oracle.com/oxp/service/PublicReportService">
<ns1:burstingOption>false</ns1:burstingOption>
<ns1:createdDate>2009-11-23T06:03:10.000Z</ns1:createdDate>
<ns1:deliveryDescription xsi:nil="true"/>
<ns1:deliveryParameters xsi:nil="true"/>
<ns1:endDate xsi:nil="true"/>
<ns1:jobGroup>administrator</ns1:jobGroup>
<ns1:jobID>366</ns1:jobID>
<ns1:jobName>603219960-ADMIN-Smaller result set</ns1:jobName>
<ns1:locale>en_GB</ns1:locale>
<ns1:reportName>Adhoc report</ns1:reportName>
<ns1:reportParameters xsi:type="ns1:ParamNameValue">
<ns1:multiValuesAllowed>false</ns1:multiValuesAllowed>
<ns1:name>SORT_COLUMN_ADHOC</ns1:name>
<ns1:values>
<ns1:item>09-NOV-2009 07:02:00|11-NOV-2009 07:02:00|2077927020;;;;;;;;;;;;;;;;;;;;|;;;;;;;;;;;;;;;;;;;;|;;;;;;;;;;;;;;;;;;;;||||||S|B</ns1:item>
</ns1:values>
</ns1:reportParameters>
<ns1:reportParameters xsi:nil="true"/>
<ns1:reportParameters xsi:nil="true"/>
<ns1:reportParameters xsi:nil="true"/>
<ns1:reportParameters xsi:nil="true"/>
<ns1:reportParameters xsi:nil="true"/>
<ns1:reportParameters xsi:nil="true"/>
<ns1:reportParameters xsi:nil="true"/>
<ns1:reportParameters xsi:nil="true"/>
<ns1:reportParameters xsi:nil="true"/>
<ns1:reportParameters xsi:nil="true"/>
<ns1:reportParameters xsi:nil="true"/>
<ns1:reportParameters xsi:nil="true"/>
<ns1:reportParameters xsi:nil="true"/>
<ns1:reportParameters xsi:nil="true"/>
<ns1:reportParameters xsi:nil="true"/>
<ns1:reportParameters xsi:nil="true"/>
<ns1:reportParameters xsi:nil="true"/>
<ns1:reportSet>false</ns1:reportSet>
<ns1:reportURL>/Navada/Normal/Adhoc report/Adhoc report.xdo</ns1:reportURL>
<ns1:runType>Run Once Only</ns1:runType>
<ns1:scheduleDescription xsi:nil="true"/>
<ns1:scheduleParameters xsi:nil="true"/>
<ns1:startDate>2009-11-23T06:03:10.000Z</ns1:startDate>
<ns1:status>Unknown</ns1:status>
<ns1:username>administrator</ns1:username>
</getScheduledReportInfoReturn>
<getScheduledReportInfoReturn xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="ns2:JobInfo" xmlns:ns2="http://xmlns.oracle.com/oxp/service/PublicReportService">
<ns2:burstingOption>false</ns2:burstingOption>
<ns2:createdDate>2009-11-20T13:00:44.000Z</ns2:createdDate>
<ns2:deliveryDescription xsi:nil="true"/>
<ns2:deliveryParameters xsi:nil="true"/>
<ns2:endDate xsi:nil="true"/>
<ns2:jobGroup>administrator</ns2:jobGroup>
<ns2:jobID>365</ns2:jobID>
<ns2:jobName>603219960-ADMIN-test again</ns2:jobName>
<ns2:locale>en_GB</ns2:locale>
<ns2:reportName>Adhoc report</ns2:reportName>
<ns2:reportParameters xsi:type="ns2:ParamNameValue">
<ns2:multiValuesAllowed>false</ns2:multiValuesAllowed>
<ns2:name>SORT_COLUMN_ADHOC</ns2:name>
<ns2:values>
<ns2:item>20-SEP-2009 13:55:00|20-NOV-2009 13:55:00|01*;;;;;;;;;;;;;;;;;;;;|;;;;;;;;;;;;;;;;;;;;|;;;;;;;;;;;;;;;;;;;;||||||S|B</ns2:item>
</ns2:values>
</ns2:reportParameters>
<ns2:reportParameters xsi:nil="true"/>
<ns2:reportParameters xsi:nil="true"/>
<ns2:reportParameters xsi:nil="true"/>
<ns2:reportParameters xsi:nil="true"/>
<ns2:reportParameters xsi:nil="true"/>
<ns2:reportParameters xsi:nil="true"/>
<ns2:reportParameters xsi:nil="true"/>
<ns2:reportParameters xsi:nil="true"/>
<ns2:reportParameters xsi:nil="true"/>
<ns2:reportParameters xsi:nil="true"/>
<ns2:reportParameters xsi:nil="true"/>
<ns2:reportParameters xsi:nil="true"/>
<ns2:reportParameters xsi:nil="true"/>
<ns2:reportParameters xsi:nil="true"/>
<ns2:reportParameters xsi:nil="true"/>
<ns2:reportParameters xsi:nil="true"/>
<ns2:reportParameters xsi:nil="true"/>
<ns2:reportSet>false</ns2:reportSet>
<ns2:reportURL>/Navada/Normal/Adhoc report/Adhoc report.xdo</ns2:reportURL>
<ns2:runType>Run Once Only</ns2:runType>
<ns2:scheduleDescription xsi:nil="true"/>
<ns2:scheduleParameters xsi:nil="true"/>
<ns2:startDate>2009-11-20T13:00:44.000Z</ns2:startDate>
<ns2:status>Unknown</ns2:status>
<ns2:username>administrator</ns2:username>
</getScheduledReportInfoReturn>
</getScheduledReportInfoResponse>
I use the following query to show a report in top of this response
select extractValue(value(t),'/*/burstingOption','xmlns="http://xmlns.oracle.com/oxp/service/PublicReportService"') "burstingOption"
, replace(trim(trailing 'Z' from extractValue(value(t),'/*/createdDate','xmlns="http://xmlns.oracle.com/oxp/service/PublicReportService"')),'T',' ') "createdDate"
, extractValue(value(t),'/*/deliveryDescription','xmlns="http://xmlns.oracle.com/oxp/service/PublicReportService"') "deliveryDescription"
, replace(trim(trailing 'Z' from extractValue(value(t),'/*/endDate','xmlns="http://xmlns.oracle.com/oxp/service/PublicReportService"')),'T',' ') "endDate"
,replace(replace(substr(extractValue(value(t),'/*/endDate','xmlns="http://xmlns.oracle.com/oxp/service/PublicReportService"') ,1,(instr(extractValue(value(t),'/*/endDate','xmlns="http://xmlns.oracle.com/oxp/service/PublicReportService"') ,'.')-1)),'T',' '),':','-') "endDate1"
, extractValue(value(t),'/*/jobGroup','xmlns="http://xmlns.oracle.com/oxp/service/PublicReportService"') "jobGroup"
, to_number(extractValue(value(t),'/*/jobID','xmlns="http://xmlns.oracle.com/oxp/service/PublicReportService"')) "jobID"
, extractValue(value(t),'/*/jobName','xmlns="http://xmlns.oracle.com/oxp/service/PublicReportService"') "jobName"
, substr(extractValue(value(t),'/*/jobName','xmlns="http://xmlns.oracle.com/oxp/service/PublicReportService"') ,(instr(extractValue(value(t),'/*/jobName','xmlns="http://xmlns.oracle.com/oxp/service/PublicReportService"') ,'-')+1)) "jobName1"
, extractValue(value(t),'/*/locale','xmlns="http://xmlns.oracle.com/oxp/service/PublicReportService"') "locale"
, extractValue(value(t),'/*/reportName','xmlns="http://xmlns.oracle.com/oxp/service/PublicReportService"') "reportName"
, extractValue(value(t),'/*/reportSet','xmlns="http://xmlns.oracle.com/oxp/service/PublicReportService"') "reportSet"
, extractValue(value(t),'/*/reportURL','xmlns="http://xmlns.oracle.com/oxp/service/PublicReportService"') "reportURL"
, extractValue(value(t),'/*/runType','xmlns="http://xmlns.oracle.com/oxp/service/PublicReportService"') "runType"
, extractValue(value(t),'/*/scheduleDescription','xmlns="http://xmlns.oracle.com/oxp/service/PublicReportService"') "scheduleDescription"
, extractValue(value(t),'/*/scheduleParameters','xmlns="http://xmlns.oracle.com/oxp/service/PublicReportService"') "scheduleParameters"
, replace(trim(trailing 'Z' from extractValue(value(t),'/*/startDate','xmlns="http://xmlns.oracle.com/oxp/service/PublicReportService"')),'T',' ') "startDate"
, extractValue(value(t),'/*/status','xmlns="http://xmlns.oracle.com/oxp/service/PublicReportService"') "status"
, extractValue(value(t),'/*/username','xmlns="http://xmlns.oracle.com/oxp/service/PublicReportService"') "username"
from wwv_flow_collections c, table(xmlsequence(extract(xmltype.createxml(c.clob001),'//getScheduledReportInfoResponse/getScheduledReportInfoReturn','xmlns="http://xmlns.oracle.com/oxp/service/PublicReportService"'))) t
where c.collection_name = 'SCHEDULED_JOB_REPORT'
Regards,
Vishal

XML and Web Service Data Source Missing in Crystal Reports for VS

I would like to use a Web Service as the data source for a Crystal Report that will be running outside of my Visual Studio application. So setting the data source to the web service in code is not possible. My understanding is Crystal Reports has a connection (in the Database Expert under New Connection) named XML and Web Service. Here you can select web service and enter the WSDL URL for the web service. However it does not appear in the list for Crystal Reports for Visual Studio. Does this connection type come with the Visual Studio version of Crystal Reports and if not is their a way to obtain it?
Thank you for your assistance.

None of the bundled versions of CR have the driver. Reason is that the driver responsible for these connections requires the Java framework and I suspect MS would not be too pleased if we installed the Java framework. The stand alone versions, since they are not part of any bundle can and do install the Java framework and the driver. Note that even the latest release of CR - CRVS2010 does not have the driver as it essentially becomes a bundle or a VS2010 plug-in.
So, the short of it is; you have to obtain a stand-alone version of CR. I'd recommend CR 2008 (12.x) as CRXI R2 will run out of support in June of this year.
- Ludek

Help!! Flash CS3 and CS4 "Test Movie" very slow on OS X

This is a problem that, having read many forums, affects a
very large amount of people, though Adobe doesn't care at all. It
only affects OS X users. I know that it has been addressed many
times in different forums, but I never actually stumbled across
anyone having found a solution.
When I use Flash CS3, and I make any animation, even the
simplest tween, and I preview it with Test Movie, the result I get
is an extremely slow playback. Something like half the FPS it
should be.
However, when I export the SWF and preview it in the external
Flash Player or in a browser, it's just fine and fast.
Another interesting thing is that in CS3, when I open the
Help panel, the problem with Test Movie only happens like 20% of
the time. In that case, it only gets solved if I restart or Log Out
at least. I have no idea why the Help panel being open solves the
problem, this only shows that this is probably a little graphic
user interface bug, or something similar, that could be solved very
very easily.
In Flash CS4, there is no Help panel, so there is no solution
to the problem.
It would be nice to be able to press Cmd + Enter to see the
movie, and not have to do File > Export > bla bla bla, open
Finder, Find the SWF, double click it, wait for the browser to
open... etc...
I have a brand new 2.5 GHz MacBook Pro, and Test Movie runs
faster on my 900MHz Pentium III PC!! Funny...
Here are some links I found about this problem:
http://bugs.adobe.com/jira/browse/FP-878
http://kb.adobe.com/selfservice/viewContent.do?externalId=kb407896
http://www.kirupa.com/forum/archive/index.php/t-258991.html
This is quite ridiculous, and on Adobe's Support page, the
solution is "Do not use Test Movie."
And the funny thing is that they didn't even bother to fix
this in CS4...
So basically if something doesn't work, Adobe's solution is
"Don't use it."
I guess they're right!
Please, tell me if anyone has or does not have this problem
or knows anything about it!
Thanks,
Mate

This is a problem that, having read many forums, affects a
very large amount of people, though Adobe doesn't care at all. It
only affects OS X users. I know that it has been addressed many
times in different forums, but I never actually stumbled across
anyone having found a solution.
When I use Flash CS3, and I make any animation, even the
simplest tween, and I preview it with Test Movie, the result I get
is an extremely slow playback. Something like half the FPS it
should be.
However, when I export the SWF and preview it in the external
Flash Player or in a browser, it's just fine and fast.
Another interesting thing is that in CS3, when I open the
Help panel, the problem with Test Movie only happens like 20% of
the time. In that case, it only gets solved if I restart or Log Out
at least. I have no idea why the Help panel being open solves the
problem, this only shows that this is probably a little graphic
user interface bug, or something similar, that could be solved very
very easily.
In Flash CS4, there is no Help panel, so there is no solution
to the problem.
It would be nice to be able to press Cmd + Enter to see the
movie, and not have to do File > Export > bla bla bla, open
Finder, Find the SWF, double click it, wait for the browser to
open... etc...
I have a brand new 2.5 GHz MacBook Pro, and Test Movie runs
faster on my 900MHz Pentium III PC!! Funny...
Here are some links I found about this problem:
http://bugs.adobe.com/jira/browse/FP-878
http://kb.adobe.com/selfservice/viewContent.do?externalId=kb407896
http://www.kirupa.com/forum/archive/index.php/t-258991.html
This is quite ridiculous, and on Adobe's Support page, the
solution is "Do not use Test Movie."
And the funny thing is that they didn't even bother to fix
this in CS4...
So basically if something doesn't work, Adobe's solution is
"Don't use it."
I guess they're right!
Please, tell me if anyone has or does not have this problem
or knows anything about it!
Thanks,
Mate

Can't run wiki and web services at the same time?

I'm a newbie with Lion Server, but I've been running several web sites successfully for about 6 months. I'm up to Server 10.7.4.
I've been trying ever since the first installation of Server to get the wiki service running. I had absolutely no luck until I turned OFF the web service (always got the "URL does not exist" error when I tried to create a group wiki from inside the Server app). With the web service off, it all starts up fine and I created my first wiki (woohoo). Turning web service back on kills access to the wiki. I don't find reference to this in any of the dicussions, and especially not in Apple's documentation.
Are the Wiki and Web services mutually exclusive? Or is there a way around this?
I'm using Dyndns to provide me with sub-domains to use, and I've dedicated one of them to the wiki service. Traffic comes in on port 8080, where my web sites are on port 80.
Thanks for any pointers...
edbok

LR supports tethering using a Canon DLL and EOS Utility probably also supports tethering or at least uses something from a similar Canon DLL. You probably cannot have two different versions of that DLL loaded at the same time, so it makes sense there are problems.

Creating metadata in Flash CS3 and reading it in AS3

Is there a way to store metadata in a library symbol in Flash
CS3, and then read it in AS3? For example, I want to have the
following code run:
m_Metadata = 'You're cool!'
I need this data before I can play the movie clip. Is there a
way to store this? I've been trying to find a solution, but it
looks like I'm just going to have to load in a separate XML file
with the data.
Thanks!

Unfortunately there's no simple way to add instance level
code in Flash CS3 or CS4 with AS3. This is a significant authoring
tool deficiency in my opinion.
Making a component... depending on what you want to do, there
can be a lot of overhead. There may also be some very flaky/buggy
behavior in Flash CS3 with custom components if your experience is
anything like mine. However, for basic metadata, try this:
1. Select the Symbol in the Library
2. Right click, choose Component Definition...
3. In the Parameters data grid you can add
parameters/properties. Make sure you set the "Variable" field as a
unique identifier for each parameter. These are the properties
you'll use in AS at runtime to retrieve the values.
4. Now on each instance on the canvas you can go to the
Parameters tab and enter custom values for each parameter.
5. At runtime, you should be able to access the values via
instance_name.variable_name
I believe that will work without actually creating a
component class and making it functional.

Message Monitoring and Web services Sequences .. SOAMANAGER

When can I use Mesage Monitoring and Sequence Monitoring .
We are making a proof a concept and we are the following.
1. A program which executes a proxy and with this proxy we are consuming a web services.
2. The proxy and web services were implemented in the same Abap Machine .
3. We execute the test and everything works very well and we consume the webservice and the program displays the expected result.
Now want to know How can we use the Message Monitoring and the Sequence Monitoring . Is this posible ? Do we have to make any previous configuration?
We don´t have any XI installation and for that we wonder if we can monitorize the webservices sequences ?
Any idea about if we can realize such king of actions ..
Many Thanks

Hi
I assumes u have dual stack.
You can do the sequence monitoring with or without PI. But without PI you would achieve that thing on the local machine.
You have to do those things at Java End using SAP NWA.
Please see this link
http://help.sap.com/saphelp_nwce10/helpdata/en/46/b00c2a99930764e10000000a1553f6/content.htm
http://help.sap.com/saphelp_nwce10/helpdata/en/46/9cb2b57ded371ae10000000a11466f/content.htm

SSL certificates and Web Services Usage inside Oracle Database Questions!

We have implemented a specific business logic using PL/SQL for our client, so we open a file and process each line of this, doing something in the Database and also call a Web Services (Service1) using UTL_HTTP package. Service1 runs in a Windows 2008 Server in the DMZ as Database server.
Service1 is already working, and we can call the service from PL/SQL without troubles.
However, according with security client's policies they requires all Web services be consumed via https including Service1, so we must to follow the procedure established for Oracle in order to enable the calling of service1 via https from the Database.
Our client's DBA and IT Team are concerned about two subjects before to continue to follow the certificate installation:
     - SSL Certificates:
1- Can installed certificates in the Database put in risk the stability of the database?
          2- Can installed certificates in the Database generate performance issues?
          3- Can installed certificates reloading the Databases?
          2- Can installed certificates in the Database generate security issues?
     - Web services:
1- Can web services calling from the Database put in risk the stability of the database?
2- Can web services calling from the Database generate performance issues?
3- Can web services calling from the Database generate security issues in the DMZ?
Could you please give us any clues, about the possible negative impact related with the SSL certificates and Web Services Usage inside Oracle Database, if it’s the case this impact exists?.
Those are the links describing the procedure mentioned above.
1 -http://www.kotti.es/2009/11/oracle-wallet/
DB: Oracle 9i.
Average number of lines in file: 300
Periodicity: Twice at day.

Thiago:
You are correct in that there should be no problem interacting with a Web service that has an HTTPS endpoint as long as you create a wallet and specify it when you make your UTL_HTTP calls, like the PayPal example.
I am not aware of a PL/SQL utility to create a XMLDsig Standard message, but if you find some Java source out there that does it, you may be able to follow a technique I used for a similar use case:
http://jastraub.blogspot.com/2009/07/hmacsha256-in-plsql.html
Regards,
Jason

Enterprise services and Web services

Hi Everyone
I need documents about Invoking enterprise services from Netweaver PI and web services from Netweaver PI, I can find only NetWeaver CE, but not PI. So help, any links?? or pdfs?? or ideal would be some demo example of invoking a web service using PI.
Thank you
Vijay

Hi,
Since you would need to wet your hands by playing with webservice and PI. Please consider the following links.
SOAP scenario
/people/siva.maranani/blog/2005/09/03/invoke-webservices-using-sapxi
https://weblogs.sdn.sap.com/pub/wlg/1334 [original link is broken] [original link is broken] [original link is broken]
https://weblogs.sdn.sap.com/pub/wlg/2131 [original link is broken] [original link is broken] [original link is broken]
https://weblogs.sdn.sap.com/pub/wlg/1442 [original link is broken] [original link is broken] [original link is broken]
Regards
joel
Edited by: joel trinidade on Mar 25, 2009 10:41 AM
Edited by: joel trinidade on Mar 25, 2009 10:43 AM

GTC Connector using SPML Format Provider and Web Services Transport Provide

Hello All,
Did any body create a GTC connector which uses SPML Format for Format Provider and Web Services format for Transport Provider?
Is there any doc which talks about the same?
I need to provision to a system over web services and I thought GTC using the above formats should be an easy approach. Am I right?
I was trying to follow:
http://download.oracle.com/docs/cd/E14571_01/doc.1111/e14309/devgtc.htm#BABDFDFE
But Iam getting lost in the immerse details.
Thanks in advance.

Hi ,
I tried creating one and am getting the following error while provisioning:
SPML Response failed V2 schema validation
Th eoracle document says :Ensure that the SPML response returned by the target system conforms to the SPML V2 standard specification
Please help me with the same. What is it that needs to be done here.
Thanks
WIP

Error during EAR deployment with EJB and web service

I created a simple stateless EJB with one method called echo that returns a string. I created a web service using the wizard, did a build and deployed. The deployment did not report an error, but the logs in the visual administrator showed the follwoing message, and the web service did NOT deploy.
Am I missing something related to EJB and web service security?
PLEASE HELP ME.
>>> Warning: delete security configuration [apps/com.areva/ear/ejb/security/com.areva~ejb.jar]
[EXCEPTION]
java.lang.Exception
     at com.sap.engine.services.security.server.PolicyConfigurations.unregisterPolicyConfiguration(PolicyConfigurations.java:153)
     at com.sap.engine.services.ejb.EJBAdmin.remove(EJBAdmin.java:2538)
     at com.sap.engine.services.deploy.server.application.RemoveTransaction.removeApplication(RemoveTransaction.java:294)
     at com.sap.engine.services.deploy.server.application.RemoveTransaction.prepare(RemoveTransaction.java:178)
     at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:299)
     at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhases(ApplicationTransaction.java:321)
     at com.sap.engine.services.deploy.server.DeployServiceImpl.makeGlobalTransaction(DeployServiceImpl.java:3028)
     at com.sap.engine.services.deploy.server.DeployServiceImpl.remove(DeployServiceImpl.java:820)
     at com.sap.engine.services.deploy.server.DeployRuntimeControlImpl.remove(DeployRuntimeControlImpl.java:271)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.sap.pj.jmx.introspect.DefaultMBeanInvoker.invoke(DefaultMBeanInvoker.java:58)
     at com.sap.pj.jmx.mbeaninfo.AdditionalInfoProviderMBean.invoke(AdditionalInfoProviderMBean.java:289)
     at com.sap.pj.jmx.server.MBeanServerImpl.invoke(MBeanServerImpl.java:944)
     at com.sap.pj.jmx.server.interceptor.MBeanServerWrapperInterceptor.invoke(MBeanServerWrapperInterceptor.java:288)
     at com.sap.engine.services.jmx.CompletionInterceptor.invoke(CompletionInterceptor.java:400)
     at com.sap.engine.services.jmx.RedirectInterceptor.invoke(RedirectInterceptor.java:340)
     at com.sap.pj.jmx.server.interceptor.MBeanServerInterceptorChain.invoke(MBeanServerInterceptorChain.java:330)
     at com.sap.engine.services.jmx.MBeanServerSecurityWrapper.invoke(MBeanServerSecurityWrapper.java:287)
     at com.sap.engine.services.jmx.MBeanServerInvoker.invokeMbs(MBeanServerInvoker.java:157)
     at com.sap.engine.services.jmx.ClusterInterceptor.invokeMbs(ClusterInterceptor.java:220)
     at com.sap.engine.services.jmx.ClusterInterceptor.invoke(ClusterInterceptor.java:803)
     at com.sap.engine.services.jmx.MBeanServerInterceptorInvoker.invokeMbs(MBeanServerInterceptorInvoker.java:102)
     at com.sap.engine.services.jmx.connector.p4.P4ConnectorServerImpl.invokeMbs(P4ConnectorServerImpl.java:61)
     at com.sap.engine.services.jmx.connector.p4.P4ConnectorServerImplp4_Skel.dispatch(P4ConnectorServerImplp4_Skel.java:64)
     at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:291)
     at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:183)
     at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:119)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:37)
     at com.sap.engine.core.cluster.impl6.session.UnorderedChannel$MessageRunner.run(UnorderedChannel.java:71)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:94)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:162)

I have the same message. I am running sp11.
Does anyone have an answer for this?????
>>> Warning: delete security configuration [apps/avalero.com/rtfa-ear/contextRoot]
[EXCEPTION]
java.lang.Exception
     at com.sap.engine.services.security.server.PolicyConfigurations.unregisterPolicyConfiguration(PolicyConfigurations.java:153)
     at com.sap.engine.services.servlets_jsp.server.container.WebContainerHelper.removeSecurityResources(WebContainerHelper.java:905)
     at com.sap.engine.services.servlets_jsp.server.container.WebContainerHelper.remove(WebContainerHelper.java:447)
     at com.sap.engine.services.servlets_jsp.server.container.RemoveAction.remove(RemoveAction.java:50)
     at com.sap.engine.services.servlets_jsp.server.container.WebContainer.remove(WebContainer.java:150)
     at com.sap.engine.services.deploy.server.application.RemoveTransaction.removeApplication(RemoveTransaction.java:294)
     at com.sap.engine.services.deploy.server.application.RemoveTransaction.prepare(RemoveTransaction.java:178)
     at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:299)
     at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhases(ApplicationTransaction.java:323)
     at com.sap.engine.services.deploy.server.DeployServiceImpl.makeGlobalTransaction(DeployServiceImpl.java:3033)
     at com.sap.engine.services.deploy.server.DeployServiceImpl.remove(DeployServiceImpl.java:821)
     at com.sap.engine.services.deploy.server.DeployRuntimeControlImpl.remove(DeployRuntimeControlImpl.java:271)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.sap.pj.jmx.introspect.DefaultMBeanInvoker.invoke(DefaultMBeanInvoker.java:58)
     at com.sap.pj.jmx.mbeaninfo.AdditionalInfoProviderMBean.invoke(AdditionalInfoProviderMBean.java:289)
     at com.sap.pj.jmx.server.MBeanServerImpl.invoke(MBeanServerImpl.java:944)
     at com.sap.pj.jmx.server.interceptor.MBeanServerWrapperInterceptor.invoke(MBeanServerWrapperInterceptor.java:288)
     at com.sap.engine.services.jmx.CompletionInterceptor.invoke(CompletionInterceptor.java:400)
     at com.sap.pj.jmx.server.interceptor.BasicMBeanServerInterceptor.invoke(BasicMBeanServerInterceptor.java:277)
     at com.sap.jmx.provider.ProviderInterceptor.invoke(ProviderInterceptor.java:255)
     at com.sap.engine.services.jmx.RedirectInterceptor.invoke(RedirectInterceptor.java:340)
     at com.sap.pj.jmx.server.interceptor.MBeanServerInterceptorChain.invoke(MBeanServerInterceptorChain.java:330)
     at com.sap.engine.services.jmx.MBeanServerSecurityWrapper.invoke(MBeanServerSecurityWrapper.java:287)
     at com.sap.engine.services.jmx.MBeanServerInvoker.invokeMbs(MBeanServerInvoker.java:157)
     at com.sap.engine.services.jmx.ClusterInterceptor.invokeMbs(ClusterInterceptor.java:220)
     at com.sap.engine.services.jmx.ClusterInterceptor.invoke(ClusterInterceptor.java:803)
     at com.sap.engine.services.jmx.MBeanServerInterceptorInvoker.invokeMbs(MBeanServerInterceptorInvoker.java:102)
     at com.sap.engine.services.jmx.connector.p4.P4ConnectorServerImpl.invokeMbs(P4ConnectorServerImpl.java:61)
     at com.sap.engine.services.jmx.connector.p4.P4ConnectorServerImplp4_Skel.dispatch(P4ConnectorServerImplp4_Skel.java:64)
     at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:294)
     at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:183)
     at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:119)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:37)
     at com.sap.engine.core.cluster.impl6.session.UnorderedChannel$MessageRunner.run(UnorderedChannel.java:71)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:94)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:162)

Flash CS3 and CS4 "Test Movie" extremely slow, ridiculous.

This is a problem that, having read many forums, affects a very large amount of people, though Adobe doesn't care at all. It only affects OS X users.
When I use Flash CS3, and I make any animation, even the simplest tween, and I preview it with Test Movie, the result I get is an extremely slow playback. Something like half the FPS it should be.
However, when I export the SWF and preview it in the external Flash Player or in a browser, it's just fine and fast.
Another interesting thing is that in CS3, when I open the Help panel, the problem with Test Movie only happens like 20% of the time. In that case, it only gets solved if I restart or Log Out at least. I have no idea why the Help panel being open solves the problem, this only shows that this is probably a little graphic user interface bug, or something similar, that could be solved very very easily.
In Flash CS4, there is no Help panel, so there is no solution to the problem.
It would be nice to be able to press Cmd + Enter to see the movie, and not have to do File > Export > bla bla bla, open Finder, Find the SWF, double click it, wait for the browser to open... etc...
I have a brand new 2.5 GHz MacBook Pro, and Test Movie runs faster on my 900MHz Pentium III PC!! Funny...
Here are some links I found about this problem:
http://bugs.adobe.com/jira/browse/FP-878
http://kb.adobe.com/selfservice/viewContent.do?externalId=kb407896
http://www.kirupa.com/forum/archive/index.php/t-258991.html
This is quite ridiculous, and on Adobe's Support page, the solution is "Do not use Test Movie."
And the funny thing is that they didn't even bother to fix this in CS4...
So basically if something doesn't work, Adobe's solution is "Don't use it."
I guess they're right!
Please, tell me if anyone has this problem or knows anything about it!
Thanks,
Mate

1) Every post I see that you have made recently reflects on problems that are most likely associated with your computer that are causing problems with your software. 1st thing I would look at with your problems (and I do not mean just this one) is a conflict with another program, ei antivirus software, etc. Trying turning off programs one by one, relaunching your CS programs, and see if you can find a culprit.
2) With that kind of attitude you are only going to receive just as friendly/helpful solutions. Just because SOMEONE ELSE doesn't solve YOUR problem does not mean that THEY are ignorant.

Messages Monitoring and Web Services Sequences .... SOAMANAGER

When can I use Mesage Monitoring and Sequence Monitoring .
We are making a proof a concept and we are the following.
1. A program which executes a proxy and with this proxy we are consuming a web services.
2. The proxy and web services were implemented in the same Abap Machine .
3. We execute the test and everything works very well and we consume the webservice and the program displays the expected result.
Now want to know How can we use the Message Monitoring and the Sequence Monitoring . Is this posible ? Do we have to make any previous configuration?
We don´t have any XI installation and for that we wonder if we can monitorize the webservices sequences ?
Any idea about if we can realize such king of actions ..
Many Thanks

hi,
short answer: you can't. to my knowledge there is no such thing as message/sequence monitoring outside of PI/XI.
the only thing you can do is to enable debugging and access some debugging info from ST22. other than that you do not have access to the original (XML) message, the HTTP headers or the ST(simple transformation) info or anything else.
regards,
anton

Flash CS3 and Web Services (again)

Similar Messages

Maybe you are looking for