Flash cs3 animation freeze problem

The subject of this post is seeking help to the following
problem: As i get 3/4 through my animation my flash cs3 suddenly
freezes down on me and the only thing that helps is closing it down
from the task manager. All the other applications run perfectly
well in the background. Got a pretty good system (3GB ram, vista,
dual core processor). Can anyone help!!!

Ни когда
больше не
буду
пользоваться
adobe Flash CS3 ,потому
что он
перезагружает
мой
компьютер.
Наверное
когда её
делали
перестарались.

Similar Messages

Flash CS3 Animation and Audio not timed properly when packaged.

I am trying to create a simulation with audio, mouse movement, mouse clicks and screen changes. When I play the movie in Flash, the animation and the audio are timed properly. However, when I package it, the animation falls behind the audio. I am using wavs for the audio - I've tried mp3s also.
I have a screen displayed with a mouse. The audio and a highlight indicate the next step, then the mouse moves and clicks the desired area - with a audio mouse click. The first "click" sound is pretty close to where it is supposed to be, but as the movie plays, it begins to occur earlier and earlier. So much so, that the audio starts to begin prior to animation is complete later in the move. This is not a real long demonstration, only about 1100 frames, but I notice the problem around frame 180.
Any suggestions?

IE stinks. There's a huge performance difference when playing
SWFs in
Firefox and IE. We have seen SWFs reach 100fps in FF 3.0
while the same SWF
taps out at around 40fps in the latest IE browser. It's not
Flash, it is the
browser.
Adobe Certified Expert
www.keyframer.com
www.mudbubble.com
(if you want to email me, don't look)
"AMK4" <[email protected]> wrote in message
news:gfk9ls$6kf$[email protected]..
> This has me baffled to no end. I have a flash file
that's behaving rather
> odd.
> Even the original author doesn't have an answer. I work
on a WinXP system,
> if
> that matters. When I test the movie within Flash CS3, it
works as
> expected: the
> animations ends as the audio fades out. When I publish
it, and I open it
> up in
> Firefox, it works as expected. But that's where it ends.
On the same
> machine,
> if I view it in Internet Explorer, the animation takes
longer - it plays
> slower. Consequently the audio ends before the animation
is done.
>
> I've tried multiple WinXP machines, they all do the same
thing. In Firefox
> it
> works as expected and the same way as previewed within
Flash CS3. But,
> viewing
> it in IE, and the animation plays longer.
>
> Wanna see it for yourself? Look at the original author's
page:
>
http://www.flashmo.com/preview/flashmo_137_intro/
>
> Open it up in IE and Firefox, side by side if you can.
Does it play
> correctly
> in both (animation ends as the music fades) ?
>
> Suggestions anyone?
>

Adobe Flash CS3 detected a problem and has to be closed.

Hello,
I'm using Flash CS3 for a month, but the problem is that
since a week ago, flash CS3 stops working after 5 minutes of use.
So today I've downloaded the test version (30 days) in
another PC, but even with this other computer the software doesn't
works and has to be closed.
So that's not because of my computer. It's a more general
problem.
Did it happened to one of you? DO you know if flash CS3
doesn't work for everyone right now?
Do you know how to repair this kind of problem? I'm very
desperate and I really need to use flash. I don't know what to do.
Thank you very much

There could be any number of items causing this. First off is do you have an active internet connection? If so have you tried rebooting you computer?

Flash CS3 - Odd button problem

Hello, Ive upgraded to Flash CS3 and I'm having a problem
with buttons.
When I open up my site, the old buttons work fine to navigate
the site and open up URL links. I have the actions on their own
layer instead of having an onRelease on each button.
However, when I create new buttons, they don't work.
I've even tried copying the existing working buttons,
applying the exact same actionscript to figure out what's going on,
but that also doesn't work, those buttons won't open up the URLs.
Am I perhaps using the wrong publish settings/flash player
choice?
Thanks

The answer is "skins" just search under "Creating skins for
some instances" in the Flash CS3 help file.

Flash CS3 timeline display problems

I have just upgraded to Flash CS3 and immediately noticed a
problem when viewing and working with the Timeline window. When I
click on a frame (keyframe or other) it highlights that frame
completely white, which means I can no longer tell what type of
frame it is. The same happens if I highlight a series of frames,
they are all white and hard to interact with. If I highlight a
series of frames and attempt to Right-Click, I can rarely get a
sub-menu to show for quick options like 'Remove Frames' and 'Create
Motion Tween'. Most of the time my Right-Click is ignored
completely (ie nothing happens).
I have searched Google, Flashkit and Adobe site for help with
this, but no love. Has anyone else experienced this problem? The
rest of my CS3 install is working perfectly.
Computer: 20" iMac Intel 2.16Ghz Core 2 Duo, 2Gb RAM, 250Gb
HDD (~100Gb Free)
OS: Mac OS X 10.4.9
Version: Adobe Flash CS3 Version 9.0

quote:
Originally posted by:
sczulu
Since upgrading from Flash V8, I'm having an issue where
prominent fonts (such as Myriad Pro) appear jaggy until the file is
published, making layout and design difficult. I've checked the
text display settings with now change in appearance. The files do
publish with anti-aliased text.
I've noticed this issue as well and was wondering why I was
having a problem, thanks for answering that question.

Flash CS3 Strange IDE Problem

Hi --
I am having a totally bizarre issue with the Flash CS3 IDE in
that my
"Output" window is always blank. This just started happening
to me today. I
have tried creating a new Flash movie and putting in a single
line of
Actionscript:
trace("Hi")
When I run the movie the Output window pops up but its blank.
Any ideas?
Thanks
Rich

Hi --
It was the "filter level" setting. I changed it from "none"
to "verbose" and
all is good. I never even knew that setting existed so I have
no idea how I
changed it! Thank you so much.
Rich
"Noelbaland" <[email protected]> wrote in
message
news:g8t2nd$4nh$[email protected]..
> Try this. Open your Output window and go to the options
menu in the top
> right
> corner. In the menu go down to Filter Level and just
check that None is
> not
> checked. If nothing is checked then choose Verbose
>
> Another thing you can check is in the Publish Settings
under the Flash
> tab.
> See if the Omit trace actions has been checked - uncheck
it if it has.
>
> Hope that helps!
>

Dreamweaver / Flash CS3 Host Server problem

I've created my flash inserted it into dreamweaver, previewed it and uploaded the pages and the JS files to my host server again and again and it everything shows up but the flash, nothing, not even a box. Any ideas on what the problem could be? They show up in the root directory on the server. the file I used was the SWF. file. Is there another way to do this?
I've tried moving the js. script around (someone said put it inside a file named "script". that didn't work either.
Rob

Hi,
I suggest posting this question in the "Dreamweaver General Discussion" forums, as it´s not related to the Dreamweaver Developer Toolbox
(ADDT) extension.
Günter Schenk
Adobe Community Expert, Dreamweaver

Flash cs3 and php problem (system error)

Hi All,
Been checking out a free utility, called Tell A Friend - followed the instructions to a t but still getting system error.
Here is the php code:
<?php
$to = ($_POST['friend']);
$link = ($_POST['link']);
$subject = "Tell a friend";
$message = "Your friend ";
$message .= $_POST['name'] . " wants advice you the following link: ".$link;
$headers = "My WebSite Name";
if(@mail($to, $subject, $message, $headers))
echo "answer=ok";
else
echo "answer=error";
?>
The main swf has a main.as attached:
* Flash Tell A Friend
* http://www.FlepStudio.org
* Author: Filippo Lughi
* version 1.0
package
import flash.display.*;
import flash.events.*;
import flash.utils.*;
import flash.external.*;
import flash.net.*;
public class main extends MovieClip
private const PHP_URL:String="sendMail.php";
private var checker:CheckEmail;
private var timer:Timer;
public function main()
   addEventListener(Event.ADDED_TO_STAGE,init);
private function init(evt:Event):void
   removeEventListener(Event.ADDED_TO_STAGE,init);
   stage.frameRate=31;
   checker= new CheckEmail();
   addInputListener();
   addSendListener();
private function addInputListener():void
   clip_mc.name_txt.background=true;
   clip_mc.name_txt.backgroundColor=0x999999;
   clip_mc.name_txt.addEventListener(FocusEvent.FOCUS_IN,onFocusIn);
   clip_mc.name_txt.addEventListener(FocusEvent.FOCUS_OUT,onFocusOut);
   clip_mc.email_txt.background=true;
   clip_mc.email_txt.backgroundColor=0x999999;
   clip_mc.email_txt.addEventListener(FocusEvent.FOCUS_IN,onFocusIn);
   clip_mc.email_txt.addEventListener(FocusEvent.FOCUS_OUT,onFocusOut);
private function onFocusIn(evt:Event):void
   evt.target.background=true;
   evt.target.backgroundColor=0xFFFFFF;
private function onFocusOut(evt:Event):void
   evt.target.backgroundColor=0x999999;
private function addSendListener():void
   clip_mc.send_mc.mouseChildren=false;
   clip_mc.send_mc.buttonMode=true;
   clip_mc.send_mc.addEventListener(MouseEvent.MOUSE_DOWN,onSendDown);
private function onSendDown(evt:MouseEvent):void
   if(clip_mc.name_txt.text!="")
    if(checker.initCheck(clip_mc.email_txt.text))
     sendEmail();
    else
     displayPhrase("Invalid Email");
   else
    displayPhrase("Invalid name");
private function sendEmail():void
   clip_mc.send_mc.mouseEnabled=false;
   var variables:URLVariables=new URLVariables();
   variables.name=clip_mc.name_txt.text;
   variables.friend=clip_mc.email_txt.text;
   variables.link=ExternalInterface.call('window.location.href.toString');
   var request:URLRequest=new URLRequest();
   request.url=PHP_URL;
   request.method=URLRequestMethod.POST;
   request.data=variables;
   var loader:URLLoader=new URLLoader();
   loader.dataFormat=URLLoaderDataFormat.VARIABLES;
   loader.addEventListener(Event.COMPLETE,onMessageSent);
   try
    loader.load(request);
   catch (error:Error)
    trace('Unable to load the document.');
private function onMessageSent(evt:Event):void
   var vars:URLVariables=new URLVariables(evt.target.data);
   if(vars.answer=='ok')
    displayPhrase("Message Sent!");
   else
    displayPhrase("System Error!");
   clip_mc.send_mc.mouseEnabled=true;
   clip_mc.name_txt.text="";
   clip_mc.email_txt.text="";
private function displayPhrase(s:String):void
   clip_mc.display_txt.text=s;
   resetPhrase();
private function resetPhrase():void
   timer=new Timer(1500,1);
   timer.addEventListener(TimerEvent.TIMER,hidePhrase);
   timer.start();
private function hidePhrase(evt:TimerEvent):void
   clip_mc.display_txt.text="";
Any help appreciated. This is a great viral marketing tool, when it ever works
Kind Regards,
Boxing Boom

Never seen such an error, but if it's in the status bar of the browser then it shouldn't be Flash problem. You can check what's happening in your swf by creating a dynamic text field and setting it's text in every major action, that is: requesting PHP and getting back response, to what's just happened.
So, on the Flash side you can see whether the browser error stops the PHP script and immobilizes further actions.
What I'd do is create a new Flash file and PHP file and just send 1 variable to PHP, change it somehow and send it back to Flash and print it in a text field. That way you can check whether it's the method you're using to request PHP or just PHP or something else. Step by step adding complexity and checking on which of these steps the error occurs.
I wish you good luck.
Ps. It's probably a very rookie problem, we just don't know the source.

CS3 Extended Freezing Problem!

I can open up PS just fine, but when I try to open a new document or open an existing one, it freezes. Any tips on what might be wrong and how to fix it are GREATLY appreciated. Also, if anyone knows how to disable Version Cue, please post the steps for that here too because that was my problem the last time this happened.

Is your printer set to a network printer that isn't available? Photoshop may be waiting for the printer driver to time out (when all we're asking for is basic information - lame drivers...).

Flash CS3 and Filter problem

Ok. So I have a file that was originally created with Flash
8. The file was opened in Flash 9 and published. The problem is
that the text that I have in there is being cut off when published
(publish preview only, The full publish works fine so far). I've
narrowed it down to being a problem with the filters that are used.
I'm using a basic drop shadow on the static text.
More specifically, when I publish using Flash 7, filters are
not supported and they are dropped out and the entire word shows.
When I publish in Flash 8 or 9 with filters turned on, the words
are cut off. For example the word "connection", when a filter is
applied, all that publishes is "connecti". The o and n are gone.
And if I change the settings on that drop shadow filter, the word
is cut off in a different place than before, sometimes cutting a
letter in half. When I delete the filter and publish in 8 or 9, the
entire word shows again. Also, I can edit the blurX or Y, or the
strength or distance and it will sometimes show the entire word.
But when I do this to other words, it creates a problem on those
words. If I then go and edit the settings back or to different
numbers, cutoff happens once again.
This is very inconsistent and makes working with filters
difficult since I can't preview what I've done without doing a full
publish. I've converted the words to movie clips and so far have
not had the same problem, however, I don't want to add movie clips.
So this basically looks like a glitch with this new version of
Flash. I sure hope that someone at Adobe sees this post and might
look into the problem.
I'm on an Intel based MacBook Pro. If anyone has run into
this problem, please let me know if you have found there to be a
solution rather than a work around. Thanks to Anyone who can help.
And once again, this only appears to be a problem when I do a
publish preview, not a full publish.
Tobin

Thanks; thats helpful.
What's going on is that the filter is being reused for your
text instances.
Flash does automatic associations between frames to see where
some objects
should be instances of or related to the objects in the frame
before it. In
your case, since each of your frames have a single static
text field in the
same depth (one spot above the jump in button), and since
they all use the
same drop shadow filter with the same settings, Flash will
reuse that exact
same filter for each of the objects in consecutive frames at
those depths
assuming they are the same object. What this amounts to is
the bounding box
for the first text+filter combination being used for all
others. You can
see this more clearly if you move the "Love" text to be at
the beginning of
the sequence and then test your movie.
What can you do? Here are a few options (though only a few
may work in your
situation):
- include one frame between each text field
- on every other text field, modify a property of the filter,
either
adjusting the strength by a value of 1, changing the quality,
or something
not visible but enough to make Flash recognize it as a
different filter
- in a layer under every other textfield place an invisible
object. This
should force every other text field to be at a higher depth
thereby
preventing Flash from assuming they are the same object as
the one before
it.
- place each text field in a movie clip thereby separating
the filters from
the same timeline (or, technically, just every other text
field would be
necessary)
- change your text to dynamic text. These will be treated as
separate
instances (or at least Flash will be wise enough not to be so
static in its
application of the filter). You may need to be sure to embed
your fonts for
anti-aliasing
In the mean time I will officially log a bug. Though Flash is
"technically"
doing what it thinks is best, its not working out very well
for this case.
"PhoTobin" <[email protected]> wrote in
message
news:[email protected]...
>I have not scaled the text at all. We've just used font
size. Here is the
>link to download the FLA.
>
>
http://www.3peaksintl.com/intro-filter.zip

Bios flash windows boot freeze/problem Neo2 Plt.

Hi i'm new here so be kind and helpful please
Ok my problem is I got my Gskill LE kit yesterday and decided to upgrade the bios from 1.3 to something more TCCD friendly (apparently) i tried, 1.4, 1.41 and 1.51 and i have the same problem with all of them. The flash is successful but i cannot get into xp. Every time whether in safe mode or not, it hangs on the Windows XP loading screen, the boot screen is very faded and only just visable on my monitor. The same problem occured with my previous ram when trying to upgrade the bios.
I have tried everything i can think of except a clean windows install, all the bios options i can think of, it was flashed when not overclocked, tried changing the hard disks from sata 3&4 to 1&2, tried different flash methods (floppy and previously tried using the live update in windows to 1.4 from msi and the same thing happened), resetting the cmos after the flash.
Computer as in signature
Any help/ideas would be much appreciated.
i would rather not do a clean xp install as i have just got it running nicely, but i suspect this is the only option. if it doesn't work, i'm going to crack the shits and try get another one.
I have looked through this forum and have found no definitive answers so i decided to create a new post.

Try to reset your bios by setting the jumper to the 2-3 pin position for about 5 seconds then back to its normal 1-2 position, then try to boot. If that makes no difference then i belive your left with the only option of formatting it again. I've had this problem before with an older system but i never took the time to troubleshoot it. I just reformatted the drive with a fresh install of XP.
Hopefully other people here can help you out with your problem but i'd check the manual and find out how to use those jumpers to reset the bios. If you cant seem to get a hold of the jumper (located below the las pci slot, its a small green plastic) then i'd remove the motherboard battery and leave it out for about 5 minutes so the capacitors can discharge properly then put it back in and try to boot. That's all i can think of right now. Or even try to repair your installation with your xp disc.
Sorry thats all i can think of right now
- Ayman

Flash CS3/CS4 Sound Problem

Hi,
I am trying to create a soundboard and I have all my buttons and stuff, the only thing left is to put the sound files in. However, I have tried adding them to the library and dragging and dropping them over the HIT option like I usually do, but when I export the swf file, the sound file sounds terrible, it crackles and sometimes stutters a bit. I have tried setting these sound files to mp3 and raw in adobe options but with no luck. I am using actionscript 2.0 if that has anything to do with it. Also, I need these files embedded, not just linked. Please let me know any suggestions you might have.
Thanks.

In the Export Settings dialog, go to the Flash tab and look at the Images and Sounds section. Check the Audio Stream and Audio Event settings. It's a common occurrence for the sound to be set to a low data rate and monophonic. If so, click both of the Set buttons and adjust the compression, bit rate and quality settings.

Can't do Publish/Publish Setting a movie in Flash CS3

I installed Flash CS3 while still keeping Flash 8. When I try
to publish/publish setting a movie, an alert pops up saying 'No
valid HTML Templates are available to complete this operation'.
Probably there was a conflict so I uninstalled both Flash
CS3, Flash 8 then installed Flash CS3 but the problem still comes
up. What is that?
Thanks in advance.

Hey,
First of all, thx for the answer.
The publish location is fine; it publishes to the same place,
like b4 the problem. Nice thought though.
What kind of problem could it have? And can it be fixed?
I've tried to rename it. Nothing.
It's a template that I've bought and I have the source file
in a ZIP, so every time it happens, after i've done some changes, I
copy them one by one, and then I publish it again and I'ts fine.
I'm sick of doing it...
What it be possible for you to check the file?
Thx,

How to update Flash CS3 Pro...

ok here is my situation
i recently set-up a new machine and just installed Flash CS3
Pro (and FMS 3.0.1.111). It had Flash Player 1.0.115.0 so i
download the update APSB08-11 to install Flash Player 1.0.124.0.
The zip file contained a folder with the Players and following the
instructions i just copied the folder in the installation folder of
Flash CS3.
The problem is that when i test a movie in Flash CS3 Pro and
do some traces in the FMS3 Admin Console i get that Agent is
1.0.115.0.
Any ideas how to successfully update the Flash Player for
Flash CS3 Professional to 9.0.124?
I have to mention that
1. for IE7 ActiveX and Mozilla Plug-in i have Flash Player
version 10.0.2.26
2. FMS3 Admin Console is running with Flash Player version
9.0.124.0
I don't think there are any conflicts because i did some
uninstalls and tried again... It just FMS3 keeps report that agent
is 9.0.115 when testing a movie from inside Flash CS3.
Could it be because i still use the trial version of Flash
CS3 Pro? Any ideas?
Thank you in advance.

Not sure I'd want to create something like that in Acrobat.
Can you create it in Word and use screen captures then PDF the end result?

Flash cs3 basic tutorial basic download

somebody knows some book or tutorial complete for download of
the flash cs3
with exercises and for beginning?
send the links
thanks
Marina

Marina,
> somebody knows some book or tutorial complete for
download
> of the flash cs3 with exercises and for beginning?
There are a number of books on the market that will help
newcomers to
Flash CS3. Some are more geared toward programming
(specifically, the
ActionScript 3.0 language, new to CS3), while others focus
more on the
drawing tools and graphic design.
If you're interested in a foundation in both -- in design
and
programming -- I'll recommend "Foundation Flash CS3 for
Designers" (friends
of ED), which I co-wrote with Tom Green. It's nearly 600
pages and sells
for a frugal $26 on Amazon.com (good reviews, so far!). The
book provides
numerous sample files for each chapter, which are
downloadable from the
friends of ED website or the book's own site:
http://www.friendsofed.com/download.html?isbn=159059861X
http://www.foundationflashcs3.com/sample-files.html
If you're an artist or animator, you're likely to get a
whole lot out of
Chris Georgenes' "How to Cheat in Adobe Flash CS3" (Focal
Press), which also
has great reviews on Amazon and sells for the same low price.
Chris gave a
standing-room only session two weeks ago at Flashforward2007
in Boston on
many of the tips in this book, and the audience response was
fantastic.
http://www.amazon.com/How-Cheat-Flash-CS3-animation/dp/0240520580
Chris's book is absolutely packed with sample files.
David
[email protected]

Flash cs3 animation freeze problem

Similar Messages

Maybe you are looking for