Flash CS3 Authering Environment Panel Problem

Hi
I am using a Flat TFT - wide screen (Dell PC) Monitor. about
19" wide.
The resolution what i am using is 1440x900
in this mode if I resize the panel or Move the panel flash
Get hanged.
Also when i open the panel It is too long than the screen
resolution....
can any one suggest me whether there is an fix for this.
Os : Windows XP (Version 2002)
Service Pack : 2

"flash Get hanged" <---meaning Flash crashes? Or does it
"hang" for a while and then revive itself?
Does this happen in other screen resolutions?
Chris Georgenes
Adobe Community Expert
www.mudbubble.com
www.keyframer.com
www.howtocheatinflash.com
Devendran wrote:
> Hi
> I am using a Flat TFT - wide screen (Dell PC) Monitor.
about 19" wide.
> The resolution what i am using is 1440x900
> in this mode if I resize the panel or Move the panel
flash Get hanged.
>
> Also when i open the panel It is too long than the
screen resolution....
>
> can any one suggest me whether there is an fix for this.
> Os : Windows XP (Version 2002)
> Service Pack : 2
>
>

Similar Messages

Flash CS3 / Illustrator CS2 Heritage Problem

Does anyone know if there are any heritage problems that
occour when you open an CS2 Illustrator file in Flash CS3?
Someone told me certain effects dont appear (i.e. gradients)
or that that image wont move as it's supposed to.
I have CS2 Illustrator & I want to purchase CS3 flash,
but I'm not sure if there would be a problem while importing my CS2
.AI files.

I have encounterd the same problems. ( illustrator,flash, indesign not working)
I did almost every thing I could think of: clear Caches, Prefs, and run CS3 clean script before reinstallation.
I also had the latest Version CUE updates 3.0.1 (downloaded the FixVCUIFramework).
But nothing above helped :( , apps still crashed right after launch.
*Then, I remembered having installed this thing called "Application Enhancer" right before the apps starting to crash. SO I REMOVED IT, and haunted down all the remaining files, trashing them all.
Next I went into the SAFE MODE (so the system clears up some caches)
After that I also DISABLED the USER FONTS when I login to the normal mode.
And my CS3 apps WORKS AGAIN !!! :)
I'm not sure which one of the above steps really solved the problem...
All I knew was that none of them could work out the problem alone.
Hope this helps a little...
GOOD LUCK!!
Ps. the Fonts thing are really troublesome!! Caused a lot crash for the system!

Problem in displaying Arabic text in flash cs3/cs4

Hi All, I'm creating one website. I have to display dynamic xmlize arabic text in flash. I have done it using flash cs3/AS3. But problem is that when text displays in flash it is not rendering as expected. Some gaps comes in the characters. But when I open my xml in browser, arabic text displays correct.
Is there any way to do it in flash cs3 or Flash cs4 using player 9? It would be really great if anyone can give me solution on this. Thanks
Chandrakant

You have to do it yourself - I don't have a ready solution. Just look into documentation how StyleSheets are used and see what properties work best for you:
http://livedocs.adobe.com/flash/9.0/ActionScriptLangRefV3/flash/text/TextField.html
http://livedocs.adobe.com/flash/9.0/ActionScriptLangRefV3/flash/text/StyleSheet.html
Also, with embedded fonts you need to play with TextFormat settings and AntiAliasType
http://livedocs.adobe.com/flash/9.0/ActionScriptLangRefV3/flash/text/AntiAliasType.html
In addition, on my machine even if I don't emebed fonts - Arabic works in Arial, TImes and others.

Importing PDF into flash CS3 - Importer du PDF dans CS3

Hello.
Originally, i posted my question in french. So i will try to
convert in english, but my english is poor.
You can see the original in french, in back of this topic, in
bolded text
So, my problem : i can import some PDF files with Flash MX
2004, but i cannot do the same with Flash CS3.
When i import (import in the scene - Command+R) the PDF file
in Flash MX 2004, i got the vectorial logo correctly and the text
as a text.
But when i import (import in the scene - Command+R) the same
PDF file into Flash CS3, there is a problem. At start, i cannot
click the PDF file, i have to choose "all the files" to can click
it. Then i click it and there is a pop window appearing, talking
about "importing video". But my PDF is not Video… And at the
end, the result is a poor jpg image of my PDF, not the vectorials
that i would like.
So why the old Flash MX can do it easily, and the recent CS3
can not ?
What i have to do ?
Bonjour,
Jusqu'à peu, j'utilisais Flash MX 2004 et quand je
faisais une importation dans la scène, je pouvais importer des
fichiers PDF, et j'obtenais en quelques dixiemes de secondes,
l'importation du contenu (en général quelques logos en
vectoriel et du texte). Léger, simple, rapide, efficace !
Et puis j'ai installé la version CS3 Professionnal, et
là c'est la débacle.
Quand je fais importation dans la scène, et
sélectionne une PDF (déjà il m'a fallu aller sur
"tous les fichiers" pour le dégriser) il me sort une usine
à gaz dont voici quelques détails.
- Il commence par m'ouvrir une fenêtre "importer de la
vidéo" me demandant de sélectionner si ladite vidéo
est sur mon DD ou déjà "déployée" sur le web.
(Mon fichier PDF n'a rien de vidéo, c'est une image fixe, nom
de xxx).
-Si je continue, il me demande "comment je veux la
déployer ?". 5je ne veux rien déployer, je veux juste
importer 2 ou 3 vecteurs et du texte !)
- je lui dis de "l'incorporer dans le swf". Il me demande
comment je veux incorporer la vidéo. (C'EST PAS DE LA
VIDÉO, t'es sourd sale bête !!!)
- je lui explique que le "type de symbole" est graphique
(j'ai le même résultat si je mets clip) et il me demande
le codage.
- si je décoche "coder la vidéo" il refuse de
continuer, et si je le coche, il m'importe une espèce de jpeg
atroce, pixelisé à mort et inexploitable (tout du moins
pour l'usage que je compte faire).
Donc ma question est "est-ce que j'ai raté un
épisode ?" (oui, plusieurs, certes, mais de là à
changer complètement l'histoire, faut pas abuser) et la
suivante c'est surtout "comment faire pour importer convenablement
mes fichiers PDF qui ne comporte que quelques logos en vectoriel et
du texte, et le tout fixe fixe fixe, rien à voir avec de la
vidéo ?"
En attendant, je ré-installe Flash MX pour avancer un
peu, mais je ne peux pas croire qu'une fonction primordiale soit
supprimée, comme ça, sans remplacement.
Os court !

Is that really the end, doc ?

Flash CS3: Serious lag when Switching between Applications

I've got a serious problem with Flash CS 3 on my Macbook Pro,
which makes it almost unworkable.
When I'm working in flash, switch to another application
(Mail, Illustrator, any...) and then switch back to flash. the
program freezes for at least 9 to 10 seconds: The Menu's are all
transparant and greyed out, and the only thing I see is the beloved
"beachball" spinning.
Needless to say that this makes it very hard to work with the
program, since switching between apps is a big part of my workflow.
Is anyone experiencing the same problem?
I have re-installed the whole CS3 suite (twice) and even
cleaned up my computer and did a clean install of OS X!!
I'm running on a 15" mac book pro (2,33) with 2gig memory,
bought last may.
Any help is welcome,

I'm having the same problem as well. I was using Flash 8,
thought I would upgrade to Flash CS3 and solve the problem but that
was no good. There's still a long lag time when switching to Flash
from any other program. Not sure if it's a Memory problem or a Font
problem. Any word on a solution for this annoying problem?
I'm running a PowerPC G5 with dual 2.0ghz processors and 2.5
GB of ram.
Thanks!

Flash CS3 now crashes randomly after 0-30 minutes

Hello,
I've been using flash CS3 for years without problem.
Since the beginning of nov.2010, it crashes after some time of use. More precisely the toolbar disappears, then reappears, some GUI elements blink. It's not related to a specific user action. When this happens, closing flash is difficult (the window remains here). When switching to another app, some Flash parts remains. The graphical memory seems saturated. Launching another app is met with a window error message. A windows restarts becomes necessary.
This problem arises only in Flash, and with no other apps from CS3 suite.
2 colleagues of mine has the same issue, also in the last weeks (= nov 2010). We work in separate places. We didn't exchange files.
We are on Win XP Home Edition, Dell computer.
They have more recent PCs than mine (which clearly meets the CS3 requirements), with enough memory,etc..
One colleague has reinstalled winXP. The problem arised again, but I don't know when. He also tried CS4 and CS5 and had the same problem.
Today he un-installed all Adobe products with this utility: http://www.adobe.com/support/contact/cs5clean.html.
After this hour of uninstall process, he reinstalled Flash CS3 and used it without network/internet (no funky updates): The problem was still here.
Does anyone has an idea?

After desinstalling Avira Antivir (and installing another antivirus software), the problem disappeared.
Just disabling Antivir is not enough.
Check this post on Avira forum (in french) for more info from Avira.

Problem with FLVPlayer in Flash CS3 (need to save out as Actionscript 3.0 SWf file)

I am using Flash CS3 and am trying to publish a SWf file that
makes use of the "FLVPlayback" component. I need for this SWF file
to be published as an Actionscript 3.0 file, so I have set my
publish settings to Flash Player 9.0 and Actionscript 3.0, but keep
getting an error as follows:
"WARNING: The component 'FLVPlayback' requires ActionScript
2.0."
Has anyone encountered this?? I am doing something wrong? I'm
pretty comfortable within Actionscript/Flash 2.0, but am only
beginning my first steps into the relam of CS3 and AS3.
I have also attached a screenshot of the files that represent
my FLVPlayback component (or so I assume). (see this link for
attachments
http://www.actionscript.org/forums/showthread.php3?t=140886)
Thanks all,
Mark
http://www.actionscript.org/forums/showthread.php3?t=140886

Mark,
> I have set my publish settings to Flash Player 9.0 and
Actionscript
> 3.0, but keep getting an error as follows:
>
> "WARNING: The component 'FLVPlayback' requires
ActionScript 2.0."
Gotcha. You must have started the document in AS2, then
changed the
publish settings. Each version of the language has its own
version of the
FLVPlayback Component (written in the relevant language).
Start over and
compare two compleley new FLA documents: make one for AS3 and
one for AS2.
Open the Components panel and note the differences between
the two. There
are a different set of Components depending on the language
chosen for the
document. Drag the FLVPlayback Component from the Components
panel in an
AS3 document, and you'll have the AS3 version.
David Stiller
Co-author, Foundation Flash CS3 for Designers
http://tinyurl.com/2k29mj
"Luck is the residue of good design."

Problem Installing Flash CS3 Pro PLEASE HELP!!

I have downloaded the installer for about the 3rd time i
extract it all right but when i run the setup.exe its all fine
until it starts to install but then it says something like " insert
Adobe Flash CS3 Professional to continue" i keep trying but it
never works i even converted the folder to a .iso and mounted it
with the same name it told me but that still doesn't work. I have
run out of ideas please if anyone knows the problem please can you
help me out?

FYI: "Br" is the Bridge application - try launching that to
see if it fully installed.
Chris Georgenes
Adobe Community Expert
mudbubble.com
keyframer.com
http://tinyurl.com/2urlka
Ms. Clause wrote:
> My computer is a brand new Vaio laptop loaded and 4 GB
RAM. I don't think I
> have a hardware problem. I tried to reinstall,
redownload and it still will
> not install the flash software. After I download I
clicked on the file and it
> install a folder in my drive, then I clicked on set up,
it went through a
> normal set up but for some reason it doesn't load Flash
CS3, it only load 2
> components from that I think it Br and something else.
>

Adobe Flash CS3 detected a problem and has to be closed.

Hello,
I'm using Flash CS3 for a month, but the problem is that
since a week ago, flash CS3 stops working after 5 minutes of use.
So today I've downloaded the test version (30 days) in
another PC, but even with this other computer the software doesn't
works and has to be closed.
So that's not because of my computer. It's a more general
problem.
Did it happened to one of you? DO you know if flash CS3
doesn't work for everyone right now?
Do you know how to repair this kind of problem? I'm very
desperate and I really need to use flash. I don't know what to do.
Thank you very much

There could be any number of items causing this. First off is do you have an active internet connection? If so have you tried rebooting you computer?

Problem displaying dynamically loaded text in Flash CS3

I created a Flash CS3 application that does not display
dynamically loaded text (from internal AS3 scripts) on 3/6 of my
client's computers. All computers run IE 6 and Flash Player 9. I
cannot replicate the problem on any computer in my department. The
problem seems to be related to Flash Player 9 or a browser
setting/IT restriction. Has anyone encountered this? If so, have
you found a solution?
If I cannot find a solution, then I will need to almost
completely redo the application.
One slightly insane idea I have considered is to, if
possible, convert dynamically loaded text to an image real-time. Is
that possible?
Btw, I have created a font in my library. Should I try
manually embedding the font from the Properties menu and selecting
all characters?
Thanks in advance.

yes, even though you may be using a font from the library,
you still have to specify that each text field that uses that font
embeds the font, and you'll need to select all characters(well not
all, unless you require all the different scripts of the world -
upper-case, lower-case, numerals and punctuation usual suffices).
I bet if you checked, the computers where the font did not
appear did not have the font on their system.
Good luck
Craig

Flash CS3 problem.

Greetings,
I have downloaded and installed the trial version of Adobe
Flash CS3,but when I click to it in order to start using it I get
this error:
Licensing for this product has stopped working:
"You cannot use this product at this time.You must repair the
problem by uninstalling and then reinstalling this product or
contacting your IT administrator or Adobe customer support help."
Any ideas?
Thanks in advance.

Also see:
http://www.adobe.com/go/kb401528
"wolf14" <[email protected]> wrote in
message
news:f2munu$dfr$[email protected]..
> Greetings,
> I have downloaded and installed the trial version of
Adobe Flash CS3,but
> when
> I click to it in order to start using it I get this
error:
>
> Licensing for this product has stopped working:
> "You cannot use this product at this time.You must
repair the problem by
> uninstalling and then reinstalling this product or
contacting your IT
> administrator or Adobe customer support help."
>
> Any ideas?
>

Flash CS3 - Odd button problem

Hello, Ive upgraded to Flash CS3 and I'm having a problem
with buttons.
When I open up my site, the old buttons work fine to navigate
the site and open up URL links. I have the actions on their own
layer instead of having an onRelease on each button.
However, when I create new buttons, they don't work.
I've even tried copying the existing working buttons,
applying the exact same actionscript to figure out what's going on,
but that also doesn't work, those buttons won't open up the URLs.
Am I perhaps using the wrong publish settings/flash player
choice?
Thanks

The answer is "skins" just search under "Creating skins for
some instances" in the Flash CS3 help file.

Wingdings 3 Problem in Flash CS3

I am trying to use Wingdings 3 in a text box (dynamic) in
Flash CS3, but it never comes up correctly. It only shows the
letter, not the corresponding symbol. I have tried embedding font
tags in the dynamic text and i have set the textbox's default font
also, but no luck. the font is installed in windows on all relevant
machines.
Any thoughts?

I just noticed the same problem - both CS3 and 4 do not display dingbats properly. Keycaps works fine. The file contained a Wingdings checkmark in a static text which I did not edit- it was a "u" with an umlaut over it when I opened the file.
I replaced the fonts and this did nothing to help. I am running Vista 32 with 4GB Ram.

Problem Installing Flash CS3 in Vista

I downloaded a trial version, but when I install, it only
install Active X and Flash Player, it gave me a message that 3
other programs did not get installed. When I try to open CS3 Flash
software it's not there only Br is there and Flash Player. Anyone
encounters this problem?
thanks.
Liz.

FYI: "Br" is the Bridge application - try launching that to
see if it fully installed.
Chris Georgenes
Adobe Community Expert
mudbubble.com
keyframer.com
http://tinyurl.com/2urlka
Ms. Clause wrote:
> My computer is a brand new Vaio laptop loaded and 4 GB
RAM. I don't think I
> have a hardware problem. I tried to reinstall,
redownload and it still will
> not install the flash software. After I download I
clicked on the file and it
> install a folder in my drive, then I clicked on set up,
it went through a
> normal set up but for some reason it doesn't load Flash
CS3, it only load 2
> components from that I think it Br and something else.
>

Flash CS3 timeline display problems

I have just upgraded to Flash CS3 and immediately noticed a
problem when viewing and working with the Timeline window. When I
click on a frame (keyframe or other) it highlights that frame
completely white, which means I can no longer tell what type of
frame it is. The same happens if I highlight a series of frames,
they are all white and hard to interact with. If I highlight a
series of frames and attempt to Right-Click, I can rarely get a
sub-menu to show for quick options like 'Remove Frames' and 'Create
Motion Tween'. Most of the time my Right-Click is ignored
completely (ie nothing happens).
I have searched Google, Flashkit and Adobe site for help with
this, but no love. Has anyone else experienced this problem? The
rest of my CS3 install is working perfectly.
Computer: 20" iMac Intel 2.16Ghz Core 2 Duo, 2Gb RAM, 250Gb
HDD (~100Gb Free)
OS: Mac OS X 10.4.9
Version: Adobe Flash CS3 Version 9.0

quote:
Originally posted by:
sczulu
Since upgrading from Flash V8, I'm having an issue where
prominent fonts (such as Myriad Pro) appear jaggy until the file is
published, making layout and design difficult. I've checked the
text display settings with now change in appearance. The files do
publish with anti-aliased text.
I've noticed this issue as well and was wondering why I was
having a problem, thanks for answering that question.

Flash CS3 Authering Environment Panel Problem

Similar Messages

Maybe you are looking for