Flash CS3, Captivate 4 Single File SWF output- playback problems
Hello,
I am trying to upload a swf file that I created to a website. I am doing this because that it the only format the site editor will allow me to do.
I tried following the steps in the tutorial on how to embed a swf into a pdf. (http://www.adobe.com/devnet/captivate/articles/movieclip_to_pdf.html)
-The File started as a flv, I opened that it Flash Pro CS3, then exported the file to a SWF (Actionscript3).
-I then created a new Captivate project, and inserted a "Animation" to put in the SWF video.
(I did this because when I tried inserting the flv it only showed it as 3 seconds, when the video is about 40, and it had no audio)
-I chose the option to not show the borders, but show the player skin (Play,pause, etc.) in Captivate.
-I then exported it to a SWF file (It also created the html, etc.)
There was a standalone SWF file created, that when I played with Flash Player, played not a problem, all of the player controls on the skin worked just fine.
However, when I uploaded the swf to the site, only the player conrols showed, and when I tried clicking on the buttons, nothing happened. When I clicked on the slider, it just showed where the video was supposed to be "2/1"
Any help would be appreciated a lot, as I am not a flash or captivate expert. (I just started using a couple of days ago)
Thank you,
Chev
Hi there
That's sure a convoluted approach!
chevtony wrote:
Hello,
I am trying to upload a swf file that I created to a website. I am doing this because that it the only format the site editor will allow me to do.
I tried following the steps in the tutorial on how to embed a swf into a pdf. (http://www.adobe.com/devnet/captivate/articles/movieclip_to_pdf.html)
Uhhh, if you want the SWF on the web site, why are you following information for inserting SWF into PDF?
-The File started as a flv, I opened that it Flash Pro CS3, then exported the file to a SWF (Actionscript3).
-I then created a new Captivate project, and inserted a "Animation" to put in the SWF video.
(I did this because when I tried inserting the flv it only showed it as 3 seconds, when the video is about 40, and it had no audio)
What you don't realize is that if you insert a 40 second video into a 3 second slide, there is no need to adjust the slide play time. There is an option that is automatically set that keeps the slide from moving on until the video completes playing.
-I then exported it to a SWF file (It also created the html, etc.)
That's normal Captivate behavior. You get a few different files. The intent is to upload them all and point the user to the HTML file. It then loads and plays the SWF.
There was a standalone SWF file created, that when I played with Flash Player, played not a problem, all of the player controls on the skin worked just fine.
However, when I uploaded the swf to the site, only the player conrols showed, and when I tried clicking on the buttons, nothing happened. When I clicked on the slider, it just showed where the video was supposed to be "2/1"
Thank you,
Chev
When you insert FLV you also have to upload the FLV. Captivate plays it by referencing it externally. It is not embedded into the SWF and remains as a separate file to deal with.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks
Similar Messages
-
Output playback problem when Premiere is running
Hi all,
I have output a few videos before and have never had this problem.
Today I output a video and tried to play the resulting file, it was severely discolored pink / green blocks.
If I close premiere down and played the file again it's perfect.
Any ideas why this maybe happening?
Thank you very much for any help in advance.It sounds like PPro and your media player are fighting for graphics card resources. Check your drivers.
Cheers
Eddie
PremiereProPedia (
RSS feed)
- Over 300 frequently answered questions
- Over 250 free tutorials
- Maintained by editors like
you
Forum FAQ -
Any version of Flash (cs3-cs5) will not publish my file..
Hi all,
this is the first time i encounter this problem.. I had the problem where a file would not open correctly which was also addressed at this forum. But this one is different. this file was created (from what i remember) in Flash 8, then opened/saved in all possible flash versions for updates in time.
While it will open just fine, it will not publish. The publish window with the percentage will open up for a split second, then it will close with no messages whatsoever, no actionscript errors, nothing. F12, the same thing again. No possible settings could solve this. I am willing to send the file for testing of course, have tried to publish using Flash cs4 and Flash cs5. I thought of going back to Flash 8 by opening the file and saving to a previous version but as soon as i open the file in Flash cs3 (while the file has been saved as cs3) it will not open the file with an error message that i cannot remember right now.
So the problem might lie in how Flash cs3 saved the file, but it will open just fine in cs4 and cs5 so the file is not corrupt in any means..
any ideas?
George
p.s. I tried deleting EVERYTHING off the stage and the library and yet it wont publish.. tried copying all frames on another empty file, couldnt publish either...Hi,
Try using different machine -
Hi --
I am having a totally bizarre issue with the Flash CS3 IDE in
that my
"Output" window is always blank. This just started happening
to me today. I
have tried creating a new Flash movie and putting in a single
line of
Actionscript:
trace("Hi")
When I run the movie the Output window pops up but its blank.
Any ideas?
Thanks
RichHi --
It was the "filter level" setting. I changed it from "none"
to "verbose" and
all is good. I never even knew that setting existed so I have
no idea how I
changed it! Thank you so much.
Rich
"Noelbaland" <[email protected]> wrote in
message
news:g8t2nd$4nh$[email protected]..
> Try this. Open your Output window and go to the options
menu in the top
> right
> corner. In the menu go down to Filter Level and just
check that None is
> not
> checked. If nothing is checked then choose Verbose
>
> Another thing you can check is in the Publish Settings
under the Flash
> tab.
> See if the Omit trace actions has been checked - uncheck
it if it has.
>
> Hope that helps!
> -
I just started using flash to import some movies to make my
movies smaller by exporting to a flash movie. I'm no pro with
video. I"m just doing this as a hobbie when I'm away from work.
I just installed Flash CS3 Pro mac and here is the problem
I'm encountering. After importing my video from another file format
I make whatever necessary edits while in flash I then export to a
.swf but only my local machine can play the swf file. I see two
options under exporting options for flash 1) is local files only
and 2) network access only. Can someone please shed some light on
the issue?
I copied the files over to my pc and the PC will not play the
flash movie. I uploaded them to my servers on the web and they
cannot play the movies either. I'm lost at this point.
Any ideas?
Thanks in advance!
THow did you import the video? Did you embed in in the
timeline or create an FLV which loads as an external file? If you
did the latter, you'll need to include the FLV file in addition to
the SWF.
Here are some great tutorials on Flash video:
http://www.gotoandlearn.com/
(scroll all the way to the bottom) -
Flash CS3- exported movie cuts off right side edge of my fonts
I made a movie in Flash CS3. The exported SWF shows that the right hand side of some of my letterforms (made from a non-converted font) are clipped off. Switching fonts produces similar results. Is there some glitch in the program that I am no aware of?
Thank you-Oh I see. No, it's just short words, upper and lower case. Nothing else as you described. The text was typeset in Flash.
I did some further testing, like switching fonts (again), enlarging the text bounding box, exporting the movie without anti-alias, converting the text to a shape (break apart twice), all to no avail. Most curious.
I should add that the text displays perfect in the .fla file. Just buggers up when I export to a .swf. -
Animação feita no flash cs3 nao aparece animada
fiz uma animação no flash cs3, exportei como video swf.Ao carregar este arquivo no meu site, o arquivo aparece estatico.ele não fica animao.fiz uma asa em movimento mas a asa fica parada. o que ocorre com isso?
-
Filling the browser in Flash CS3
In Dreamweaver I am able to insert a short script to fill the
browser when I view my website. How can I do this fill the browser
action with Flash CS3??ojodegato wrote:
> In Dreamweaver I am able to insert a short script to
fill the browser when I view my website. How can I do this fill the
browser action with Flash CS3??
file - publish setting - html , change publish size to 100%
rather than fixed pixel size.
Then it will follow your available space in html document.
Best Regards
Urami
"Never play Leap-Frog with a Unicorn."
<urami>
If you want to mail me - DO NOT LAUGH AT MY ADDRESS
</urami> -
HELP!, This signs dont works in Flash CS3 - {} []
Please help..
This signs dont work in Flash CS3.
Has anyone experienced the same problem?
What to do? The weird thing is that all of these signs works in other programs....
ctrl + alt + 0 = }
ctrl + alt + 7 = {
ctrl + alt + 8 = [
ctrl + alt + 9 = ]
Iam running Flash CS3, on my MacBook Pro, Vista BootCamp...
Soooo frustrating..
// DwaneFinally I have been able to embed fonts. Basically you should remember one thing. You can only embed the font to a dynamic text box if and only if you have added it in the library. The steps are as follows.
1) Press ctrl + l and bring the flash assets library.
2) Add new font, give it a name and select the font to add including its size style (bold italics etc).
3) Select the textbox. Apply your font. (All fonts from your library comes with a trailing * mark).
4) Select the glyphs to embed. Generally it can be all upper case letters, all lower case letters, numericals and punctuation marks.
and you are done.
But do remember that you can only do this to a dynamic text box -
A single .swf output file?
I import my captivate simulations into my Authorware
programs. This requires a single .SWF output file. I want to be
able to use the skin (border) feature and produce only 1 single
file. Can this be done? Anyone have a work-around...
Thanks,
kshasmithHi there kshasmith
So you want to eat all that cake and still have some to take
with you, eh?
I think you would be able to accomplish this the old
fashioned way. That is, the way we did it in Captivate 1. Notice
that if you DE-select the borders check box, you STILL end up with
the playback controls. They are just plopped on top of the bottom
of the movie. Sooooo, if you click Project > Resize Project...
you can increase the height of the movie to make room for the
playback controls.
Steps:
Click Project > Resize Project...
DE-select the "Maintain Aspect Ratio" check box
Add 35 pixels or so to the value in the Height field
Choose the option to Keep project the same size and fill the
background with color
Choose the color your skin would have provided
Click the drop-down and position the project in the Top
Center
Click the Finish button
This should result in a single .SWF movie that is basically
identical to a skinned Captivate movie using two .SWFs.
Give that a go and see how you fare.
Cheers... Rick -
Problem with FLVPlayer in Flash CS3 (need to save out as Actionscript 3.0 SWf file)
I am using Flash CS3 and am trying to publish a SWf file that
makes use of the "FLVPlayback" component. I need for this SWF file
to be published as an Actionscript 3.0 file, so I have set my
publish settings to Flash Player 9.0 and Actionscript 3.0, but keep
getting an error as follows:
"WARNING: The component 'FLVPlayback' requires ActionScript
2.0."
Has anyone encountered this?? I am doing something wrong? I'm
pretty comfortable within Actionscript/Flash 2.0, but am only
beginning my first steps into the relam of CS3 and AS3.
I have also attached a screenshot of the files that represent
my FLVPlayback component (or so I assume). (see this link for
attachments
http://www.actionscript.org/forums/showthread.php3?t=140886)
Thanks all,
Mark
http://www.actionscript.org/forums/showthread.php3?t=140886Mark,
> I have set my publish settings to Flash Player 9.0 and
Actionscript
> 3.0, but keep getting an error as follows:
>
> "WARNING: The component 'FLVPlayback' requires
ActionScript 2.0."
Gotcha. You must have started the document in AS2, then
changed the
publish settings. Each version of the language has its own
version of the
FLVPlayback Component (written in the relevant language).
Start over and
compare two compleley new FLA documents: make one for AS3 and
one for AS2.
Open the Components panel and note the differences between
the two. There
are a different set of Components depending on the language
chosen for the
document. Drag the FLVPlayback Component from the Components
panel in an
AS3 document, and you'll have the AS3 version.
David Stiller
Co-author, Foundation Flash CS3 for Designers
http://tinyurl.com/2k29mj
"Luck is the residue of good design." -
Import Swf file corrupts in Flash CS3
Hi,
I have recorded my desktop activity in "My Screen Recorder
Pro" and export the movie as swf file. While playing it on Flash
player 9, I found NO problem at all but when I import it into Flash
CS3 (or Flash 8) to embed with my project the file get corrupted
and I could see black solids squares in between. How do I get clean
swf file which is just fine when playing in Flash player?
Raju SachaniaProbably because you used _root within your scrollbar code.
If that's the
case you can fix by setting lockroot to true, within your
scroll bar swf.
Just place a this._lockroot = true; as the first line in
frame 1's code.
That being said, it's better to simply avoid using _root.
Dave -
www.offroadfire.com
Head Developer
http://www.blurredistinction.com
Adobe Community Expert
http://www.adobe.com/communities/experts/ -
FLA files between Mac and PC versions of Flash CS3
Hello, I have a PC at work and a Mac at home and have found
that there are differences with font rendering in Flash CS3 on each
operating system.
I have a Flash application that looks beautiful. However, the
same .FLA file will position fonts a few pixels differently on my
mac.
For instance, I can make a flash file on my PC with perfectly
positioned fonts and after publishing, these fonts will look
perfect on both PC and Mac (from the SWF). If I then open the .FLA
on my Mac the fonts will be slightly off, and after publishing the
fonts will be off on both the PC and on Mac (from the SWF).
Has anyone else experienced this problem? Anyone got any
suggested workarounds or am I stuck?
This is the only major problem I've had going between the CS3
programs on my PC and my Mac (I mainly use Dreamweaver and Flash).
Thanks for any help!I have this same problem. Most fonts are vertically
misaligned after loading a PC-created FLA on a Mac, and vice versa.
OpenType fonts seem to have a greater baseline shift than Truetype
fonts. Arial is one of the few fonts that doesn't shift (that I've
tried). The direction of the shift is upwards from PC->Mac, and
downwards from Mac->PC. Also, the linespacing changes. On the
Mac the linespacing is reduced, so multiple lines get bunched
together. To see this issue, create a new document on either
platform and place some text. Draw a line at the baseline of the
text. Save and reload this file on the other platform.
If you make the text dynamic and click on "show border around
text," the problem gets a little more interesting. On the PC, all
text with ascenders and descenders appear firmly within the border.
On the Mac, the border excludes the ascenders on OpenType fonts, so
the text butts up right to the border and ascenders poke out the
top. This is a bug in its own right. I work primarily with Folio
fonts, and have seen this problem on all of the OpenType fonts I've
tried. On TrueType fonts I tend to see the bounding box "almost"
right, but it still just clips the ascenders, and causes a small
baseline shift.
I think the baseline shift problem is because the Mac version
determines the bounding box incorrectly. When you place text using
the text cursor, it does it according to the font's baseline, which
is good. But I suspect Flash stores the position of the text in
terms of the upper left (or any other) corner of the bounding box.
Because the bounding box is calculated incorrectly (but
consistently) on a single platform, reloading the file within that
platform results in perfect positioning. Loading another platform's
FLA would cause a shift because the font's bounding box is
different -- it's the same position of the textfield, but the
displayed text relative to that store textfield position is higher
up on the Mac than on the PC.
This problem has really made me regret switching to the Mac.
have to do all my work inside Parallels now, on Flash CS3/Win,
because the artists and other Flash developers in the office are
all on PC. It is a total showstopper for me, and quite aggravating.
I simply can't check in my FLAs on the Mac side with my Mac
positioning, because it makes it impractical for anyone else to
edit my work. -
Captivate 3 and Flash CS3 under Vista 64
Hello,
I'm having a problem with using Adobe Captivate 3 and Adobe Flash CS3 in tandem to get my Captivate project in a file format accepted by online video sharing sites such as YouTube. Since Captivate 3 does not have an option to export to .avi or any other accepted movie file format, I thought that I would export the Captivate project to Flash, and then export it to the avi file format through Flash. However, whenever I select "File>Export>Project To>Flash CS3," I get the following error in Flash:
quote:
The import did not finish because an unknown error occurred
I could not find any resources that pertained to my particular problem. I am using Windows Vista Ultimate 64-bit, with a different directory structure than XP. In the Adobe Developer Center article " Exporting your Adobe Captivate project to Flash," it references a certain "RDMFISTUB.DLL" file that I cannot locate on my system. Could this problem be caused by incompatibilities with Vista?
My end goal is to post a Captivate project comprised of mostly full-motion recording to YouTube. If there is another way to do this that doesn't involve installing any 3rd-party software, I'm open to that as well.
Thank youYou said...
quote:
The much bigger obstacle is that when I export a Captivate
project that incorporates full-motion recordings with static slides
displaying a text caption to Flash and then to .mov, I lose the
full-motion recordings: they are replaced with a blank white or
black screen (whatever the background color is set to be). The
audio is gone too. I don't know what is causing this, but I would
really appreciate any help you could lend me concerning this.
I don't have a solution -
maybe someone else here does - but would offer an
observation ...
Keeping in mind that I avoid monkeying with my own Captivate
projects in Flash because of the various inconsistencie, some of
which you have seen ... I am hopeful that the Captivate team does
something to address the handling of full-motion slides. We all
know that they are created as AVI clips which are then converted to
SWF as separate slides, so it seems logical to me that there must
be a way to offer the source, that is, the AVI or a FLA either of
which would then be handled separately inside Flash (for those who
like to do their tinkering in that environment).
In the meantime, you might try to change the timing of the
(errant) full-motion slide a bit. Like, perhaps add or subtract a
tenth of a second to it or otherwise change its properties so that
the import doesn't end up as a blank. Just thinking out loud in
trouble-shooting mode... come to think of it, when the project is
published to SWF/HTM, each full-motion slide is published as a
separate SWF file. Would it be possible to publish the project,
then try to bring that SWF back into Captivate as an animation?
It's late here and I'm getting into fuzzy-thinking time, so if that
doesn't make sense, it wouldn't surprise me. -
Captivate 3 to Flash CS3 Problem
Hi
I am trialling v3 and just been trying out the export to
Flash CS3 option which seems problematic - no images seems to be
exported.
On the exporting progress screen I am getting a 508 error -
not supported, Flash CS3 opens and I have some assets but no images
Anyone know how to fix this?
Also is it not possible to export individual slides to Flash?
It would make editting in Flash a whole lot easier than having 1
big timelime.
Thanks
KevinHi Larry
No I am not a Flash developer, just looking for an option to
have a little programmability in Captivate.
I have just spent a few months looking at options for
producing learning apps - desktop or CD/DVD delivery rather than
the web. I had settled on Arthoware but then Adobe announced they
were not going to continue with this anymore. They suggest Flash,
Captivate or Director as alternatives But Flash is great for web,
not great for desktop or CD/DVD (distributing swf files not a good
idea as they are too insecure), Captivate has no programmability
and Director has little or no question/learning objects. So really
no alternative to Arthorware.
My view based on a very quick look at Captivate is that one
way may be to build individual scenes in Flash and then import
these into Captivate slides. No control over program flow or
writing to file, etc though.
I had a feeling integration would be an issue, the
ex-Macromedia products were/are good but all built using different
languages - Flash/Actionscript, Director/Lingo and Arthorware had
yet another language. Hopefully Adobe will copy the guys at
Microsoft and try to re-build the products on the same framework
all using the same programming language, then we may have
consistence and better integration
Yours
Kevin
Maybe you are looking for
-
How to Get Name of Application Server at runtime to use internally in Code.
Hi I have an JSF application that can run on any application server. My requirement is to know the application server at run time. like what application server I am using at run time, Tomcat, WAS, Glassfish etc. And I have to provide Some Information
-
Removing photo album from desktop
I accidentally moved a photo album to my desktop and would like to remove it. How do I do that?
-
When will the iPhone 4 get flash support!!
You know this is really a killer for all iPhone models. Why? just why don't they have this for their hardware. I should be able to access every website via the web.
-
Why can't I right-click to see settings?
When I am using my cam and microphone on a website I cannot right-click to get to the settings manager. This started three days ago out of nowhere. What can I do? I am using Google Chrome, but I have tried it on IE and Firefox as well. I am using Win
-
Should I Normalize all my tracks?
I am newer to working with Logic Pro 7.1 I am working on a personal recording project now and was wondering if I should normalize all of my audio tracks after recording them? Pros? Cos? Does it hurt anything to do that?