Flash CS3. Please Help. Thanks.
Well, I used ActionScript 2.0 and made two buttons.
I attached my file, where it shows the difference between the two buttons.
I can't figure out my mistake on the first button. I don't know why the first button appears inside a big white box (and very small), while the second button appearing fills the whole white box with the button.
I'm sorry I don't have for the one that is working properly, but I have the one ofr that is not working, because I acidentally probably deleted it. But, I have the swf file, if you know how I can get it back to fla, please let me know. But, I attached the one that doesn't work.
Similar Messages
-
CoolType.dll error when starting Flash CS3, please help!
Hello,
I recently downloaded Flash CS3 Trial from Adobe, a huge
download, after download i tried to install, a really huge
installation!
After the installation is complete finally, i started the
Flash CS3 and it gives me this error:
Faulting application flash.exe, version 9.0.0.494, faulting
module cooltype.dll, version 5.4.15.1, fault address 0x000a2a98.
Then i replaced the file from an older version of
CoolType(i.e. 5.1.39.1) by replacing it from other Adobe
installations, then it gives a new error message:
Faulting application flash.exe, version 9.0.0.494, faulting
module adobepdfl.dll, version 8.1.0.546, fault address 0x001b60cd.
I am using Windows XP
Can anybody help me with this?
I don't what to do, if there is anything wrong with my fonts,
should i remove all fonts and check?
Or do i have to install any Microsoft Windows Patch for this?
Or any other way?
I really need to explore CS3!
Please advice,
Thanks,
AamirNot sure if you found a solution to this but I was having
this similar problem and just found a post on the
google
forums that said it was a font that was installed. It doesn't
look like it's cooltype so it must be a font that's
installed. -
Text doesn't show, scroll bar does? using Flash CS3 Please help!
A little background: I made text box, typed some text, converted it to a movie clip, named etc. Used a purchased and proven scroller component ... followed directions to the letter, including referencing/linking the files. However, when I tried to test the scroll bar .... the scroll bar appears, scrolls and works perfectly except the text does not appear. I have tried making a scroll bar with the UIscrollbar same thing happens. I made an other attempt and put pics along with the text in the movie clip ... this time the pics appeared and scrolled, but the text still would not appear. PLEASE HELP. I am on a deadline and can't get past this scroll bar issue. THANK YOU!
Hi
Thanks for the tip. I did embed the text, but still not showing. Currently, I have the text box set to the following: Dynamic Text, Multiline, Border Around text, Anti-Alias for Animation (but I have tried all choices and embed the text each time).
Here are the original instructions with the FTscrollbar which I followed exactly.
1. Drag the component (FTscrollbar) from the components panel to the stage.
2. Create a new movie clip to be scrolled:
a. create a textfield on the scene and type in a few lines of text
b. select the text fields and covert them to a move clip symbol having the registration point top left. (I did top right since my scroll bar is on the right).
c. give the new movie clip an name in properties panel.
3.Select the component of the stage and configure its parameters in the parameters panel or component inspector panel.
a. Instruc the component to scroll the new created movie clip as the targetMovieClip
b. Set the viewAreaHeight and viewAreaWidth
c. set snapMode to snapToView value
d. leave rest of parameters unchanged unless you want to adjust.
4. Test Movie (contol/test movie)
On the FTscrollbar, I have the targetMovieClip set to the movieclips name the only other parameters the instructions said to change were veiwAreaHeight=100 veiwAreaWidth=150 which were the defaults. When I change this numbers the scroll bar goes away and the text still doesn't appear? The scroll bar is 16 x 140, the text box to be scrolled is 130 x 143 and the entire flash page is 500 x 550. I am not sure what the viewAreaHeight and viewAreaWidth are for ... or if that could be the problem? I have never had problems with scrollers but I used MX. I just recently purchased the CS3 and I am not sure what I am not selecting or not selecting but if feel it's probably something simple I am overlooking. So any more ideas are MOST APPRECIATED. If you need more info from me to help solve, please feel free to ask. THANKS! -
Color management issues with Flash CS3, please help?
Hello everyone.
I am having issues with color from a Jpeg image produced in Photoshop CS4
after importing onto the stage in Flash CS3. The color in Flash changes the image to a lighter less saturated state. Yuk.
Here is a link to a screen capture to show you what's happening (for a bigger view):
http://www.rudytorres.com/color/weirdcolor.png
As you can see the front image is the Photoshop image showing the sRGB color profile embedded but Flash (behind) changes that color.
This client is quite picky and she will notice this difference.
If any one can help, please.
- Rudy
P.S. It's a button somewhere, Right?Dougfly,
Only an hour wasted? Lucky you. Color is an incredibly complex subject. First, forget matching anything to the small LCD on the back of your camera. That's there as a basic guide and is affected by the internal jpg algorithm of your camera.
2nd, you're not really takeing a color photo with your digital camera, but three separate B&W images in a mosaic pattern, exposed thru separate red, green and blue filters. Actual color doesn't happen until that matrix is demosaiced in either your raw converter, or the in-camera processor (which relies heavily on camera settings, saturation, contrast, mode, etc.)
Having said the above, you can still get very good, predictable results in your workflow. I have a few color management articles on my website that you might find very helpful. Check out the Introduction to Color Management and Monitor and Printer Profiling. In my opinion, a monitor calibration device is the minimum entry fee if you want decent color.
http://www.dinagraphics.com/color_management.php
Lou -
hi there.candy crush not loading on my mac.been playing with it via facebook.flash player is updated.please help thank you
Have you tried uninstalling . rebooting the computer and then reinstalling?
-
I made a keynote then saved it to a flash drive. When I tried to open the keynote on another computer using the flash drive t says, "keynote quit unexpectedly". I have tried multiple times but it never worked. Please help, thanks.
Yes, the Old Master file has a folder for each year where I find all photos from that specific year. I am attaching a screen shot of the file.
In the meantime i have managed to download all photos (it did not download any video files though in mpg, avi, 3gp, m4v,mp4 and mov format) to a new iphoto library. Unfortunately the photos are quite mixed and often doubled up. I ma considering to purchase iphoto library which checks all duplicates in iphoto. this will save me a lot of time. What do you think? -
I erased an iphone on find my iphone , so i wanted to know what happened and I erased my without a sim card and now I says I cant go on it until i put in a sim card. Did i ruin the phone please help thanks.
You did not ruin the phone, you will need a sim card to activate the phone and then connect the phone to itunes and do a restore from back up.
http://support.apple.com/kb/HT1414 -
my ipod generation 5 will not come out of recovery mode. i was simply updating my software and this happened. it will not let me restore it comes up with and error. please help, thanks.
Hey erinoneill24,
Thanks for using Apple Support Communities.
Sounds like you can't update your device. You don't mention an error that it gives you. Take a look at both of these articles to troubleshoot.
iPod displays "Use iTunes to restore" message
http://support.apple.com/kb/ts1441?viewlocale=it_it
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808?viewlocale=de_DE_1
If you started your device in recovery mode by mistake, restart it to exit recovery mode. Or you can just wait—after 15 minutes the device will exit recovery mode by itself.
Have a nice day,
Mario -
AirPlay not showing on iPad anywhere. I've tried all of the rebooting functions and checked the control centre to no avail. The wifi networks are the same. Please help, thanks.
To use AirPlay, you need the following:
1. iPhone 4s (or later), iPad 2 (or later), iPad mini, or iPod touch (5th generation)
2. Apple TV (2nd or 3rd generation)
3. AirPort Express
4. Wi-Fi (802.11a/g/n) network
http://support.apple.com/kb/ht4437 -
MacBook Pro (15-inch, Late 2011) It turns on for less than 60 sec thens shutsoff by itself, it won't load to recovery hd partition, won't load to mac OS and already replaced with new MLB, but the problem still persist.. able to run ASD EFI but ASD OS wont work.please help thanks in advance
Holy crap, I got it to work.
Essentially, I just waited until DiskWarrior reached Step 9 and told it to skip the step before it had a chance to freeze. It skipped successfully, moved on, rebuilt and replaced the faulty directory files.
So far the computer is booting like normal, I can log in, and I'm currently copying all of the data to an external as I type this.
I still have no idea why the computer wouldn't mount or boot to any drive, but I guess I'll deal with that later. -
Dear Sirs,
I had just upgraded my OS to the OS X Mavericks. After doing so, I noticed the following changes:
1) My MS Outlook for Mac 2011 does not sync with my Mac book's calendar/contacts/notes.
2) My iPhone4s does not sync with my Mac book's calendar/contacts/notes anymore.
Please help, thank you.
aawwiiCorrect, USB local sync was taken away from iphones and ipads with 10.9.1 and 2. We are not allowed to speculate on rumours it might come back in 10.9.3 plus new iTunes. Either wait and see or explore Syncmate 5 beta free trial.
icloud still works.
Cant help with the Outlook problem. -
My ipad 2 cant open. Its appear a connector and a logo of itunes. Please help thanks!
You are in Recovery Mode.
Follow step 1 to 5 closely to recover your iPad.
http://support.apple.com/kb/HT1808
Note: You may have to repeat the above a few times -
How do I connect ny samsung tab2 note to hp deskjet 2540 if you could please help, thank you
how do I connect ny samsung tab2 note to hp deskjet 2540 if you could please help, thank you
Hi,
Your printer is not an ePrint printer as shown:
http://www8.hp.com/au/en/products/printers/product-detail.html?oid=5296007#!tab=specs
Please try the SECOND part of the following setup (for classic printers):
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02817255&cc=us&dlc=en&lc=en#N65
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
HT5312 I do not remember the security answer apple ID.Please help.Thanks you!
I do not remember the security answer apple ID.Please help.Thanks you!
If you have a rescue email address (which is not the same thing as an alternate email address) set up on your account then steps 1 to 5 on the page that you posted from should let you reset them : go to https://appleid.apple.com/ and click 'Manage your Apple ID' on the right-hand side of that page and log into your account, then click on 'Password and Security' on the left-hand side of that page and on the right-hand side you should see an option to send security question reset info to your rescue email address.
If you don't have a rescue email address (you won't be able to add one until you can answer 2 of your questions) then you will need to contact iTunes Support / Apple to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down the page that you posted from to add a rescue email address for potential future use -
I have the 10.7.4 and I cannot get the Flash Player ,, please help me.
I have the 10.7.4 and I cannot get the Flash Player ,, please help me.
If you downloaded it, it's likely in your Downloads folder as a Disk Image .dmg. Just open it and intall Flash player and restart your browser. Everything should work.
Clinton -
hi, my new device was set up in the store that I bought it from. How can I transfer all old text messages over to my new device? I have followed the icloud back up steps on this page. Please help, thank you.
Its an iPhone 4
Message was edited by: zzziggy85Here is how
http://support.apple.com/kb/HT2109
Maybe you are looking for
-
I have a macbook pro and for some reason the "0,-,P" keys are not responding at all. they just stopped working one day. so that means i cant type a "0,),_,-,p,P" at all. i have to copy and paste all P's and 0's, it sucts and its frustrating, so can a
-
hi, I am maintaining delivering plant at customer master level, material master level and even in customer info record... but at the time of sales order its not picking the delivery plant... even if i enter it manually also its saying.. not a
-
Source Determination for contracts via ME25
Hi All, We are using ME25 to create PO's. During source determination, a contract that is valid on the delivery date but not on the current date is not suggested as a possible source of supply though it has been maintained in the source list. We know
-
"24" style split screen effect
First of all a huge thanks to the Apple community, your helpfulness with all things Mac is one more reason I prefer Apple to Windows! My question: I am pulling in video from an event where several different cameras shot the same thing from different
-
Uk Mac user. Questions about internet connection please!
I own a Mac G4 800 Mhz tower. At present connect to the internet via ethernet to router. The past few days it has been running very slowly. Checked the Netgear router page where it states the incoming strength is approx 4MB. *+What can be done to hel