Flash CS3 seams sluggish with text and if actionscript window open

I have a movie clip on the stage that has a large text box
inside with 18-20pt font, 3-4 paragraphs of text. When I try to
scrub the timeline, the playhead on the timeline does not keep up
with my mouse... it lags way behind. It's like the Flash CS3
software starts to freeze or hang. And the text in the final swf
movie doesn't animate on the timeline.
What I did finally discover is that if I hide (turn off
visiblity) the layer on the timeline that has the text movie clip,
voila! I can now smoothly scrub the timeline. What gives??? I think
others have had similar issues with the CS3 actionscript panel.
My pc specs are as follows... (I think it should be beefy
enough to handle this simple text animation).
Vista Ultimate SP1 64-bit, Intel Quad Core, 8G Ram, 512MB
eVGA 9800GTX graphics card

You have to switch the focus back to the application and then
to the test window. Evidently between Flash MX04 (the one I have to
test) and CS3, they made it so that just clicking in the AS editor
window doesn't return the focus to the application. In that case
the Testing Environment intercepts the apple-enter and just
re-tests the already compiled version.
If you click the application window, then click the
actionscript window, it will recompile the swf. However I
personally don't find apple-w to close the window so
onerous.

Similar Messages

My hard drive died last week, and I needed to install a new one. Previously, I was able to save a .doc with text and inserted photo to .pdf and then to .jpg. Now I can get the .pdf but can't determine what to do to convert to .jpg. Does anyone know ?

My hard drive died last week, and I needed to install a new one. Previously, I was able to save a .doc with text and inserted photo to .pdf and then to .jpg. Now I can get the .pdf but can't determine what to do to convert to .jpg. Does anyone know ?

Rather than do that, which means starting over from scratch, losing all your edits, organisation and so on, why not simply use iPhoto Library Manager to revert the Library to the older version? Easier, less destructive.
The instructions on that are here
If you really want to start over: you can access the Originals folder simply by going to your Pictures Folder and finding the iPhoto Library there. Right (or Control-) Click on the icon and select 'Show Package Contents'. A finder window will open with the Library exposed.

How do i set text in a object so that object expands with text and has even space on both sides of the object in illustrator cc?

how do i set text in a object so that object expands with text and has even space on both sides of the object in illustrator cc?

if you see all the different panel. I past the info in and have to manually expand the width of every panel. Is there a way of pasting the text in and the panel moves to the right with so that there is an even space on both sides of the blue panel?

JMenu with text and icon

Is it possible to create a JMenu with text and an icon where only the icon brings up the menu and the text behaves like a JMenuItem? How would you do this. Right now I have a JMenuItem next to a JMenu where the JMenu only has an icon. The problem with this is it is seemingly impossible to get them as close together as I would like. Any suggestions for solving the spacing issue would be equally helpfull. Thanks.

From your previous thread you are aware that JMenu and JMenuItem both extend AbstractButton. So, you should be able to play with the borders and margins:
setBorder(null);
setMargin( new Insets(0, 0, 0, 0) );

I´ve made four Columns with text and an Image over the middle of two columns. How do I put a text u

I´ve made four Columns with text and an Image over the middle of two columns. How do I put a text under the Image that spans over the Columns?

Did you mean that?
or
Did you mean that?
Let me know.

How do you share thousands of pictures with text and captions outside of PSE? (PSE 4)

One of my dad’s retirement passions is family genealogy and old family pictures. Several years ago I gave my family PSE 4.0 for Christmas so that we could each have backup copies of our dad’s pictures. Usually once per year, I made backup copies of everything and emailed the DVDs to my brothers and sisters. Everyone knows the basic PSE 4 functions and share our dad's enjoyment with the old family photos.
My problem is that my dad is running out of pictures to scan. He wants to “share” or “show” his photos with others so that he can “borrow” their photo albums in order to scan their photos. He plans to attend a hometown high school reunion later this fall. He hopes to "collect" photo albums from cousins and classmates. I have been struggling with this for several days without any good ideas.
The scanned pictures lack any text (added as a layer?) or captions. Creating a slideshow (on my dad’s computer is slow). Also, a slideshow doesn’t let others select individual pictures to save from the slide show
He has old pictures pre-PSE 4 that allowed him to add captions directly to the picture when it was scanned. I never liked this approach as it "destroyed" the actual picture but these old pictures are more easily shared as individual pictures.
How do you share thousands of pictures with text and captions outside of PSE? Can you save or export a composite picture with all the layers?
Thanks in advance for your help and replies.

I think it is one of the printer option screens that gives me the choice of tabbed 4x6. All of the choices specifiy HP or Other so I am pretty sure it is printer software that offers me this choice.
Make sure your image has a 4x6 aspect ratio. I have been quite happy with the tabbed 4x6. Just need to remember to load the paper with the tab last.
So, in elements you set to 4x6, in printer options you should be able to choose 4x6 tabbed paper.

TS2755 Does anyone know why: when using Messages on my iPad, a cannot send a message with only text on it? Strange though, I can send a message with text AND a photo??

Does anyone know why, when using Messages on my iPad, a cannot send a message with only text on it? Strange though, I can send a message with text AND a photo??

Hi Cass,
If you are having issues with Messages on your iPad, you may find the following article helpful:
iOS: Troubleshooting Messages
http://support.apple.com/kb/ts2755
Regards,
- Brenden

I often have to open files .cue with Text Edit. Right Click, Open with, Others, Text Edit. Is it possible to put Text Edit in the menu avoiding to use "others"?

I often have to open files .cue with Text Edit. Right Click, Open with, Others, Text Edit. Is it possible to put Text Edit in the menu avoiding to use "others"?

The easiest way is to keep Textedit in the Dock and drag the .cue file(s) to the Dock icon.
You can also create an Automator Service:
Open Automator
Select: Service
Select Service receives selected [files or folders] in [Finder]
and:
Then select one or more .cue file, right click (or Control-click) on the selection to display the contextual menu. Scroll to the bottom of the contextual menu and select Services -> (what you named the Service).

Report RDLC print deployment influenced by "Make text and others items window larger or smaller" is that behaviors right?

I have my PC at the window "Make text and others items window larger or smaller" set at the 150%.
How great was my surprise when I found that this setting of my PC broke my RDLC report print deployment.
Do you now about this mistakes?
Is that behavior of "Windows 8" right?
Or is that behavior of "vs 2013" right?

Hello,
Since this issue is mainly related to visual studio report, I am moving this thread to
Other Forums > Visual Studio Report Controls
forum to get help.
And IMO I would agree with you that it should be the right behavior, since it could affect the other printing tasks.
Regards,
Carl
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Creating an messagebox in forms with look and feel of Windows

I wanted to create an message box in my form with look and feel of windows.For this i used the package ORA.FFI...but i am getting an error....and i am not bale to clear it...the code is as follows
Package Specification: -
PACKAGE messagebox IS
/*Function message_box calls windows MessageBox function. */
FUNCTION message_box(plptext IN VARCHAR2,plpcaption IN VARCHAR2)
RETURN PLS_INTEGER;
END;
Package body : -
PACKAGE BODY messagebox IS
lh_window ORA_FFI.LIBHANDLETYPE;
fh_mb ORA_FFI.FUNCHANDLETYPE;
lh_forms ora_ffi.libHandleType;
/* Function i_mbx acts as the interface to the Messagebox
function in windows
FUNCTION i_mbx(funchandle IN ORA_FFI.FUNCHANDLETYPE,
plptext IN OUT VARCHAR2,
plpcaption IN OUT VARCHAR2)
RETURN PLS_INTEGER;
PRAGMA interface(C,i_mbx,11265);
FUNCTION message_box(plptext IN VARCHAR2,
plpcaption IN VARCHAR2)
RETURN PLS_INTEGER IS
ltext VARCHAR2(500) := plptext;
lcaption VARCHAR2(500) := plpcaption;
BEGIN
RETURN(i_mbx(fh_mb,ltext,lcaption));
END;
BEGIN
lh_window := ORA_FFI.LOAD_LIBRARY('d:\','DclMsgBox.dll');
fh_mb := ORA_FFI.REGISTER_FUNCTION(lh_window,'DclMsgBox',ORA_FFI.C_STD);
ORA_FFI.REGISTER_RETURN(fh_mb,ORA_FFI.C_CHAR_PTR);
ORA_FFI.REGISTER_RETURN(fh_mb,ORA_FFI.C_CHAR_PTR);
--ORA_FFI.REGISTER_RETURN(fh_mb,ORA_FFI.C_INT);
END;
Now when i call this function in When-New-Form-Instance as
declare
p number;
begin
p:=messagebox.message_box('hello','test');
end;
I had created an dll for message box and placed the .dll and .lib files in the d:\ of my system.
I get an error message when i run the app. The error is:
The instruction at "0x005a3b24" referenced memory at "0x00000006".The memory could not be "read".
Can anybody please tell me where have i gone wrong....

Colin Martin wrote:
I agree the leather look is horrible. It's just not a reflection of the cutting edge modern design we have all got to love over the years. If it has to be there at least give us a choice of looks.
There is a word for this (not that one) - skeuomorph. Wikipedia defines this as 'a derivative object that retains ornamental design cues to a structure that was necessary in the original. Skeuomorphs may be deliberately employed to make the new look comfortably old and familiar'.
Common examples are found in audio software with pictures of actual knobs that you turn, as here; and the leather-bound tear-off look of calendar and contacts on the iPad is the same principle: the intention is to make it familiar and friendly to people who might otherwise be frightened off by a modern look because they are not used to modern technology. The whole concept and look of the iOS operating system is being brought into use on Macs for the same reason, to encourage non-tech-savvy people not to be frightened of them.
This is all very well in its way, but in these two particular cases the result is unfortunate, particularly for experienced users, and it really ought to be possible to choose between the looks (as you can with the Mail layouts), even if the skeuomorph is the default.

I am having trouble uploading photos to facebook. I saw a block tab on the upload button, I clicked it and a mozilla window opened. I didn't understand it and then ended up blocking the facebook loader. How do I undo this?

When I tried to load picture to facebook it wouldn't load. Then in the upload pop-up I noticed a block tab over the upload button. I clicked it and a Mozilla window opened with all kinds of selections I didn't understand. In an attempt to get out of it I blocked the uploader now in FB and can't figure out how to make Mozilla unblock it.

That was probably an Adblock Plus "block tab" that you clicked.
Open ABP prefs and look at the top section of the Filter Rule section > My Ad Blocking Rules = right-click the rule that you just set and use '''Delete'''.

How to use as3 in flash cs3 to add dynamic text from a text file into a flash file

let me start out by saying today is my first day of scripting
in flash.
I have a text file text.txt
it contains
text1=hello world
can someone please show me how to display this text in a
flash file
i have been searching for this for hours and there are
solutions with flash mx and actionscript 2.0 but i would like to
see how to do this in as3.
just a simple frame that loads that file and displays it when
you test run the program
much apreciated
RC

I'm not up on AS3 yet, but many things are still similar. You
need to use the LoadVars class to accomplish this, You can find
information this in Flahs Help>Actionscript>Actionscript
Language Reference>Actionscript classes.
rem: the text.txt file and the text.fla file must be in the
same directory.
The code will look something like this:

How can i copy line with text and image to ms word

When I insert an image in textflow using InlineGraphicElement it works, but when I copy the line with the image to MS Word it copies only the text (not the image).
How can i copy the image to MS Word?

If you want copy formatted text and image to MS Word, you need to give MS Word rtf markup, because Word can recognize rtf markup but not TLF markup.
So you need to create a custom clipboard to paste a rtf markup. It's a large feature for you, because you need a tlf-rtf converter in your custom clipboard.
TLF Custom Clipboard Example:
package
    import flash.display.Sprite;
    import flash.desktop.ClipboardFormats;
    import flashx.textLayout.container.ContainerController;
    import flashx.textLayout.conversion.ITextImporter;
    import flashx.textLayout.conversion.TextConverter;
    import flashx.textLayout.edit.EditManager;
    import flashx.textLayout.elements.*;
    import flashx.undo.UndoManager;
    // Example code to install a custom clipboard format. This one installs at the front of the list (overriding all later formats)
    // and adds a handler for plain text that strips out all consonants (everything except aeiou).
    public class CustomClipboardFormat extends Sprite
        public function CustomClipboardFormat()
            var textFlow:TextFlow = setup();
            TextConverter.addFormatAt(0, "vowelsOnly_extraList", VowelsOnlyImporter, AdditionalListExporter, "air:text" /* it's a converter for cliboard */);
        private const markup:String = '<TextFlow whiteSpaceCollapse="preserve" version="2.0.0" xmlns="http://ns.adobe.com/textLayout/2008"><p><span color=\"0x00ff00\">Anything you paste will have all consonants removed.</span></p></TextFlow>';
        private function setup():TextFlow
            var importer:ITextImporter = TextConverter.getImporter(TextConverter.TEXT_LAYOUT_FORMAT);
            var textFlow:TextFlow = importer.importToFlow(markup);
            textFlow.flowComposer.addController(new ContainerController(this,500,200));
            textFlow.interactionManager = new EditManager(new UndoManager());
            textFlow.flowComposer.updateAllControllers();
            return textFlow;
import flashx.textLayout.conversion.ITextExporter;
import flashx.textLayout.conversion.ConverterBase;
import flashx.textLayout.conversion.ITextImporter;
import flashx.textLayout.conversion.TextConverter;
import flashx.textLayout.elements.IConfiguration;
import flashx.textLayout.elements.TextFlow;
class VowelsOnlyImporter extends ConverterBase implements ITextImporter
    protected var _config:IConfiguration = null;
    /** Constructor */
    public function VowelsOnlyImporter()
        super();
    public function importToFlow(source:Object):TextFlow
        if (source is String)
            var firstChar:String = (source as String).charAt(0);
            firstChar = firstChar.toLowerCase();
            // This filter only applies if the first character is a vowel
            if (firstChar == 'a' || firstChar == 'i' || firstChar == 'e' || firstChar == 'o' || firstChar == 'u')
                var pattern:RegExp = /([b-df-hj-np-tv-z])*/g;
                source = source.replace(pattern, "");
                var importer:ITextImporter = TextConverter.getImporter(TextConverter.PLAIN_TEXT_FORMAT);
                importer.useClipboardAnnotations = this.useClipboardAnnotations;
                importer.configuration = _config;
                return importer.importToFlow(source);
        return null;
    public function get configuration():IConfiguration
        return _config;
    public function set configuration(value:IConfiguration):void
        _config = value;
import flashx.textLayout.elements.ParagraphElement;
import flashx.textLayout.elements.SpanElement;
import flashx.textLayout.elements.ListElement;
import flashx.textLayout.elements.ListItemElement;
class AdditionalListExporter extends ConverterBase implements ITextExporter
    /** Constructor */
    public function AdditionalListExporter()
        super();
    public function export(source:TextFlow, conversionType:String):Object
        if (source is TextFlow)
            source.getChildAt(source.numChildren - 1).setStyle(MERGE_TO_NEXT_ON_PASTE, false);
            var list:ListElement = new ListElement();
            var item1:ListItemElement = new ListItemElement();
            var item2:ListItemElement = new ListItemElement();
            var para1:ParagraphElement = new ParagraphElement();
            var para2:ParagraphElement = new ParagraphElement();
            var span1:SpanElement = new SpanElement();
            span1.text = "ab";
            var span2:SpanElement = new SpanElement();
            span2.text = "cd";
            list.addChild(item1);
            list.addChild(item2);
            item1.addChild(para1);
            para1.addChild(span1);
            item2.addChild(para2);
            para2.addChild(span2);
            source.addChild(list);
            var exporter:ITextExporter = TextConverter.getExporter(TextConverter.TEXT_LAYOUT_FORMAT);
            exporter.useClipboardAnnotations = this.useClipboardAnnotations;
            return exporter.export(source, conversionType);
        return null;

ID CS3 Transparency weirdness with text/special effects

Okay, I was putting together a brochure for my job today and noticed this oddity. I placed a text box w/text over a stock photo and printed it out - everything was fine. Then I added a drop shadow to the text and all of a sudden the photo became rather desaturated.
Just in case this was some sort of weirdness with that particular document, I created a new document, placed several photos on a page, and then created a text box and applied a drop shadow. All the photos on the page again noticeably lost saturation, and here's the weird part, the text box didn't even touch any of the photos. It only appears to affect items on the same page - items on other pages are unaffected.
It seems whenever you have an object or text frame on a page with transparency or a special effect like a drop shadow, all the photos on the page lose about 20% saturation.
Am I missing something that I can compensate for, or is this a bug/feature?

I'm using shadows and transparency overlays in my InDesign CS3 application. When I output that file to a press resolution pdf file, it appears fine. However, when the digital printer runs the project, the transparency disappears and i get white boxes in the place of transparent boxes.
The print provider is a non-offset source and is using some other RIP to process the file. Is the transparency feature posing a problem in the offset invironment?
Victor

Flash CS3 Help (Shape With Bitmap in Runtime)

HI,
I am A Beginner in Adobe Flash CS3
Now, i make a fla (Flash Document) file.
say, there is a bitmap (image) in the asset/Library (imported).
I create a shape with that image. (fill type as bitmap).
Now. what i want, i want to change that shape bitmap in run time using external image file (jpeg) file. I can load and change images of movie clip. But i don't want that. I want to change the bitmap of a shape (graphic symbol) by loading an external file (image file ex.jpeg) and also want to keep aspect ratio. (say my shape size is 800X600 px and i want to load 1486x1020px image in that shape. So, it will keep aspect ratio and resize to 800x600.
could anybody help me out..
****Pleaese At least give me a suggestton or Feedback****
please check this File, May be it will help you guys about my requirement.
Don't Panic File Size is Only (410 KB) And No Password Or Any Kind of Virus) As the file extension is (.fla And .jpg)
(http://rapidshare.com/files/316519572/Flash_CS3_1.rar)
First watch test.jpg file
i heighlight some point :
1. The Graphic Symbol (Shape 2)
2. Shape 2 Fill Type (Bitmap)
3. The Image In Assest Library
4. The Shape 2 (with fill type as bitmap)
Now, The point is what i want. If you already watch the movie (Test.fla). Then, say i have a picture (D:\Pics\Load.jpg). i want to load that jpeg file on runtime in shape 2 (as bitmap fill type) and also keep aspect ratio. I don't want to add the image to my library (asset).
Ok, could anyone help me out ....
Thanks in Advance...

Not entirely sure what you're looking for, but you use a Loader to load images at runtime. You can size them as you like by setting the width and height.

Flash CS3 seams sluggish with text and if actionscript window open

Similar Messages

Maybe you are looking for