Flash CS3 Strange IDE Problem

Hi --
I am having a totally bizarre issue with the Flash CS3 IDE in
that my
"Output" window is always blank. This just started happening
to me today. I
have tried creating a new Flash movie and putting in a single
line of
Actionscript:
trace("Hi")
When I run the movie the Output window pops up but its blank.
Any ideas?
Thanks
Rich

Hi --
It was the "filter level" setting. I changed it from "none"
to "verbose" and
all is good. I never even knew that setting existed so I have
no idea how I
changed it! Thank you so much.
Rich
"Noelbaland" <[email protected]> wrote in
message
news:g8t2nd$4nh$[email protected]..
> Try this. Open your Output window and go to the options
menu in the top
> right
> corner. In the menu go down to Filter Level and just
check that None is
> not
> checked. If nothing is checked then choose Verbose
>
> Another thing you can check is in the Publish Settings
under the Flash
> tab.
> See if the Omit trace actions has been checked - uncheck
it if it has.
>
> Hope that helps!
>

Similar Messages

Adobe Flash CS3 detected a problem and has to be closed.

Hello,
I'm using Flash CS3 for a month, but the problem is that
since a week ago, flash CS3 stops working after 5 minutes of use.
So today I've downloaded the test version (30 days) in
another PC, but even with this other computer the software doesn't
works and has to be closed.
So that's not because of my computer. It's a more general
problem.
Did it happened to one of you? DO you know if flash CS3
doesn't work for everyone right now?
Do you know how to repair this kind of problem? I'm very
desperate and I really need to use flash. I don't know what to do.
Thank you very much

There could be any number of items causing this. First off is do you have an active internet connection? If so have you tried rebooting you computer?

Flash CS3 - Odd button problem

Hello, Ive upgraded to Flash CS3 and I'm having a problem
with buttons.
When I open up my site, the old buttons work fine to navigate
the site and open up URL links. I have the actions on their own
layer instead of having an onRelease on each button.
However, when I create new buttons, they don't work.
I've even tried copying the existing working buttons,
applying the exact same actionscript to figure out what's going on,
but that also doesn't work, those buttons won't open up the URLs.
Am I perhaps using the wrong publish settings/flash player
choice?
Thanks

The answer is "skins" just search under "Creating skins for
some instances" in the Flash CS3 help file.

Flash CS3 timeline display problems

I have just upgraded to Flash CS3 and immediately noticed a
problem when viewing and working with the Timeline window. When I
click on a frame (keyframe or other) it highlights that frame
completely white, which means I can no longer tell what type of
frame it is. The same happens if I highlight a series of frames,
they are all white and hard to interact with. If I highlight a
series of frames and attempt to Right-Click, I can rarely get a
sub-menu to show for quick options like 'Remove Frames' and 'Create
Motion Tween'. Most of the time my Right-Click is ignored
completely (ie nothing happens).
I have searched Google, Flashkit and Adobe site for help with
this, but no love. Has anyone else experienced this problem? The
rest of my CS3 install is working perfectly.
Computer: 20" iMac Intel 2.16Ghz Core 2 Duo, 2Gb RAM, 250Gb
HDD (~100Gb Free)
OS: Mac OS X 10.4.9
Version: Adobe Flash CS3 Version 9.0

quote:
Originally posted by:
sczulu
Since upgrading from Flash V8, I'm having an issue where
prominent fonts (such as Myriad Pro) appear jaggy until the file is
published, making layout and design difficult. I've checked the
text display settings with now change in appearance. The files do
publish with anti-aliased text.
I've noticed this issue as well and was wondering why I was
having a problem, thanks for answering that question.

Flash cs3 animation freeze problem

The subject of this post is seeking help to the following
problem: As i get 3/4 through my animation my flash cs3 suddenly
freezes down on me and the only thing that helps is closing it down
from the task manager. All the other applications run perfectly
well in the background. Got a pretty good system (3GB ram, vista,
dual core processor). Can anyone help!!!

Ни когда
больше не
буду
пользоваться
adobe Flash CS3 ,потому
что он
перезагружает
мой
компьютер.
Наверное
когда её
делали
перестарались.

Dreamweaver / Flash CS3 Host Server problem

I've created my flash inserted it into dreamweaver, previewed it and uploaded the pages and the JS files to my host server again and again and it everything shows up but the flash, nothing, not even a box. Any ideas on what the problem could be? They show up in the root directory on the server. the file I used was the SWF. file. Is there another way to do this?
I've tried moving the js. script around (someone said put it inside a file named "script". that didn't work either.
Rob

Hi,
I suggest posting this question in the "Dreamweaver General Discussion" forums, as it´s not related to the Dreamweaver Developer Toolbox
(ADDT) extension.
Günter Schenk
Adobe Community Expert, Dreamweaver

Strange ide problem with 845 ultra

i have got a really strange problem with my 845 ultra board
I have a 2.0 GHz cpu in it, 2x 256MB Nanya CAS2 ddr, , gf4ti and a Realtek nic, onboard audio
ide ports:
primary master: IBM 80GB hdd
primary slave : Lite-On dvd
secundary master: Lite-On 40x cd-rw
Whenever I burn a cd, the whole system hangs while writing the lead-in and lead-out, after that is complete,everything works fine again
Also, when i add files to my Winamp playlist, I always get a general protection fault in Winamp.exe...
And, yes I did check my ram with Memtest86, it is fine
Even a fresh install of either windows 2000 sp3 or windows xp doesn't have any effect, even with all WHQL certified drivers installed
The strange thing is: If I connect all ide devices on a Promise Ultra100 TX2, all problems disappear.
So, is my onboard ide controller dying?
btw, all ide devices work fine in my brothers k7t266 pro2..
edit: fixed it
Never knew that the Intel ide drivers needed to be installed.
I have never needed any ide drivers for any board,so this surprises me.

Quote
Originally posted by wonkanoby
power supply details,make model,combined amps 3.3 and 5 v
Enermax 431W EG465PVE
combined amps
min - 185W
max - 220W

Flash cs3 and php problem (system error)

Hi All,
Been checking out a free utility, called Tell A Friend - followed the instructions to a t but still getting system error.
Here is the php code:
<?php
$to = ($_POST['friend']);
$link = ($_POST['link']);
$subject = "Tell a friend";
$message = "Your friend ";
$message .= $_POST['name'] . " wants advice you the following link: ".$link;
$headers = "My WebSite Name";
if(@mail($to, $subject, $message, $headers))
echo "answer=ok";
else
echo "answer=error";
?>
The main swf has a main.as attached:
* Flash Tell A Friend
* http://www.FlepStudio.org
* Author: Filippo Lughi
* version 1.0
package
import flash.display.*;
import flash.events.*;
import flash.utils.*;
import flash.external.*;
import flash.net.*;
public class main extends MovieClip
private const PHP_URL:String="sendMail.php";
private var checker:CheckEmail;
private var timer:Timer;
public function main()
   addEventListener(Event.ADDED_TO_STAGE,init);
private function init(evt:Event):void
   removeEventListener(Event.ADDED_TO_STAGE,init);
   stage.frameRate=31;
   checker= new CheckEmail();
   addInputListener();
   addSendListener();
private function addInputListener():void
   clip_mc.name_txt.background=true;
   clip_mc.name_txt.backgroundColor=0x999999;
   clip_mc.name_txt.addEventListener(FocusEvent.FOCUS_IN,onFocusIn);
   clip_mc.name_txt.addEventListener(FocusEvent.FOCUS_OUT,onFocusOut);
   clip_mc.email_txt.background=true;
   clip_mc.email_txt.backgroundColor=0x999999;
   clip_mc.email_txt.addEventListener(FocusEvent.FOCUS_IN,onFocusIn);
   clip_mc.email_txt.addEventListener(FocusEvent.FOCUS_OUT,onFocusOut);
private function onFocusIn(evt:Event):void
   evt.target.background=true;
   evt.target.backgroundColor=0xFFFFFF;
private function onFocusOut(evt:Event):void
   evt.target.backgroundColor=0x999999;
private function addSendListener():void
   clip_mc.send_mc.mouseChildren=false;
   clip_mc.send_mc.buttonMode=true;
   clip_mc.send_mc.addEventListener(MouseEvent.MOUSE_DOWN,onSendDown);
private function onSendDown(evt:MouseEvent):void
   if(clip_mc.name_txt.text!="")
    if(checker.initCheck(clip_mc.email_txt.text))
     sendEmail();
    else
     displayPhrase("Invalid Email");
   else
    displayPhrase("Invalid name");
private function sendEmail():void
   clip_mc.send_mc.mouseEnabled=false;
   var variables:URLVariables=new URLVariables();
   variables.name=clip_mc.name_txt.text;
   variables.friend=clip_mc.email_txt.text;
   variables.link=ExternalInterface.call('window.location.href.toString');
   var request:URLRequest=new URLRequest();
   request.url=PHP_URL;
   request.method=URLRequestMethod.POST;
   request.data=variables;
   var loader:URLLoader=new URLLoader();
   loader.dataFormat=URLLoaderDataFormat.VARIABLES;
   loader.addEventListener(Event.COMPLETE,onMessageSent);
   try
    loader.load(request);
   catch (error:Error)
    trace('Unable to load the document.');
private function onMessageSent(evt:Event):void
   var vars:URLVariables=new URLVariables(evt.target.data);
   if(vars.answer=='ok')
    displayPhrase("Message Sent!");
   else
    displayPhrase("System Error!");
   clip_mc.send_mc.mouseEnabled=true;
   clip_mc.name_txt.text="";
   clip_mc.email_txt.text="";
private function displayPhrase(s:String):void
   clip_mc.display_txt.text=s;
   resetPhrase();
private function resetPhrase():void
   timer=new Timer(1500,1);
   timer.addEventListener(TimerEvent.TIMER,hidePhrase);
   timer.start();
private function hidePhrase(evt:TimerEvent):void
   clip_mc.display_txt.text="";
Any help appreciated. This is a great viral marketing tool, when it ever works
Kind Regards,
Boxing Boom

Never seen such an error, but if it's in the status bar of the browser then it shouldn't be Flash problem. You can check what's happening in your swf by creating a dynamic text field and setting it's text in every major action, that is: requesting PHP and getting back response, to what's just happened.
So, on the Flash side you can see whether the browser error stops the PHP script and immobilizes further actions.
What I'd do is create a new Flash file and PHP file and just send 1 variable to PHP, change it somehow and send it back to Flash and print it in a text field. That way you can check whether it's the method you're using to request PHP or just PHP or something else. Step by step adding complexity and checking on which of these steps the error occurs.
I wish you good luck.
Ps. It's probably a very rookie problem, we just don't know the source.

Flash CS3 and Filter problem

Ok. So I have a file that was originally created with Flash
8. The file was opened in Flash 9 and published. The problem is
that the text that I have in there is being cut off when published
(publish preview only, The full publish works fine so far). I've
narrowed it down to being a problem with the filters that are used.
I'm using a basic drop shadow on the static text.
More specifically, when I publish using Flash 7, filters are
not supported and they are dropped out and the entire word shows.
When I publish in Flash 8 or 9 with filters turned on, the words
are cut off. For example the word "connection", when a filter is
applied, all that publishes is "connecti". The o and n are gone.
And if I change the settings on that drop shadow filter, the word
is cut off in a different place than before, sometimes cutting a
letter in half. When I delete the filter and publish in 8 or 9, the
entire word shows again. Also, I can edit the blurX or Y, or the
strength or distance and it will sometimes show the entire word.
But when I do this to other words, it creates a problem on those
words. If I then go and edit the settings back or to different
numbers, cutoff happens once again.
This is very inconsistent and makes working with filters
difficult since I can't preview what I've done without doing a full
publish. I've converted the words to movie clips and so far have
not had the same problem, however, I don't want to add movie clips.
So this basically looks like a glitch with this new version of
Flash. I sure hope that someone at Adobe sees this post and might
look into the problem.
I'm on an Intel based MacBook Pro. If anyone has run into
this problem, please let me know if you have found there to be a
solution rather than a work around. Thanks to Anyone who can help.
And once again, this only appears to be a problem when I do a
publish preview, not a full publish.
Tobin

Thanks; thats helpful.
What's going on is that the filter is being reused for your
text instances.
Flash does automatic associations between frames to see where
some objects
should be instances of or related to the objects in the frame
before it. In
your case, since each of your frames have a single static
text field in the
same depth (one spot above the jump in button), and since
they all use the
same drop shadow filter with the same settings, Flash will
reuse that exact
same filter for each of the objects in consecutive frames at
those depths
assuming they are the same object. What this amounts to is
the bounding box
for the first text+filter combination being used for all
others. You can
see this more clearly if you move the "Love" text to be at
the beginning of
the sequence and then test your movie.
What can you do? Here are a few options (though only a few
may work in your
situation):
- include one frame between each text field
- on every other text field, modify a property of the filter,
either
adjusting the strength by a value of 1, changing the quality,
or something
not visible but enough to make Flash recognize it as a
different filter
- in a layer under every other textfield place an invisible
object. This
should force every other text field to be at a higher depth
thereby
preventing Flash from assuming they are the same object as
the one before
it.
- place each text field in a movie clip thereby separating
the filters from
the same timeline (or, technically, just every other text
field would be
necessary)
- change your text to dynamic text. These will be treated as
separate
instances (or at least Flash will be wise enough not to be so
static in its
application of the filter). You may need to be sure to embed
your fonts for
anti-aliasing
In the mean time I will officially log a bug. Though Flash is
"technically"
doing what it thinks is best, its not working out very well
for this case.
"PhoTobin" <[email protected]> wrote in
message
news:[email protected]...
>I have not scaled the text at all. We've just used font
size. Here is the
>link to download the FLA.
>
>
http://www.3peaksintl.com/intro-filter.zip

Flash CS3/CS4 Sound Problem

Hi,
I am trying to create a soundboard and I have all my buttons and stuff, the only thing left is to put the sound files in. However, I have tried adding them to the library and dragging and dropping them over the HIT option like I usually do, but when I export the swf file, the sound file sounds terrible, it crackles and sometimes stutters a bit. I have tried setting these sound files to mp3 and raw in adobe options but with no luck. I am using actionscript 2.0 if that has anything to do with it. Also, I need these files embedded, not just linked. Please let me know any suggestions you might have.
Thanks.

In the Export Settings dialog, go to the Flash tab and look at the Images and Sounds section. Check the Audio Stream and Audio Event settings. It's a common occurrence for the sound to be set to a low data rate and monophonic. If so, click both of the Set buttons and adjust the compression, bit rate and quality settings.

Dreamweaver CS3 strange FTP problem

Helllo,
I have just passed from windows to Mac (I got Leopard) .... I
have installed Dreamweaver CS3
and I have imported all the site definition (like Host FTP,
username, password, etc...) from the windows version
But when I try to connect to any server, I recive this error
"An FTP error occured - cannot make connection to host
no response from the server this may be due to one or more
reasons:
- Accessing the server requires firewall settings that aren't
properly set. Please verify that the firewall settings in the Site
category of the Preferences dialog box are properly set, and that
the Use Firewall option in the Site definition dialog box is
selected.
- The server may be accepting only passive mode or only
active mode. Toggling the "Use Passive FTP" checkbox may help you
establish a connection.
- If you are connecting to an IPv6 enabled server, please
select "Use IPv6 transfer mode" checkbox in the Advanced site
definition dialog.
- Your local firewall may be blocking the incoming FTP data.
Please disable it to see if it makes a difference.
- It is possible your FTP may be using a non-standard FTP
port (21). If you need to specify a non-standard port, enter the
port number after host name separated by a colon":". "
I have tryed to use other FTP programs and I got mix results:
Cyber Duck and Fetch are working
Fugu and Filezilla for Mac do not connect to any server
I am clueless .... .... can someone give me a hand?
thanks in advance

Are you running a firewall?
http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_14834&sliceId=2
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"sharemind1" <[email protected]> wrote in
message
news:[email protected]...
> Helllo,
>
> I have just passed from windows to Mac (I got Leopard)
.... I have
> installed
> Dreamweaver CS3
> and I have imported all the site definition (like Host
FTP, username,
> password, etc...) from the windows version
>
> But when I try to connect to any server, I recive this
error :
>
> "An FTP error occured - cannot make connection to host
> no response from the server this may be due to one or
more reasons:
>
> - Accessing the server requires firewall settings that
aren't properly
> set.
> Please verify that the firewall settings in the Site
category of the
> Preferences dialog box are properly set, and that the
Use Firewall option
> in
> the Site definition dialog box is selected.
>
> - The server may be accepting only passive mode or only
active mode.
> Toggling
> the "Use Passive FTP" checkbox may help you establish a
connection.
>
> - If you are connecting to an IPv6 enabled server,
please select "Use IPv6
> transfer mode" checkbox in the Advanced site definition
dialog.
>
> - Your local firewall may be blocking the incoming FTP
data. Please
> disable it
> to see if it makes a difference.
>
> - It is possible your FTP may be using a non-standard
FTP port (21). If
> you
> need to specify a non-standard port, enter the port
number after host name
> separated by a colon":". "
>
>
>
> I have tryed to use other FTP programs and I got mix
results:
>
> Cyber Duck and Fetch are working
>
> Fugu and Filezilla for Mac do not connect to any server
>
> I am clueless .... .... can someone give me a hand?
>
> thanks in advance
>

Problem with compression with flash cs3

our web developper says that she was unable to compress image
with flash cs3 any idea why and what i can do for her ?
Thanks

Mark,
> I have set my publish settings to Flash Player 9.0 and
Actionscript
> 3.0, but keep getting an error as follows:
>
> "WARNING: The component 'FLVPlayback' requires
ActionScript 2.0."
Gotcha. You must have started the document in AS2, then
changed the
publish settings. Each version of the language has its own
version of the
FLVPlayback Component (written in the relevant language).
Start over and
compare two compleley new FLA documents: make one for AS3 and
one for AS2.
Open the Components panel and note the differences between
the two. There
are a different set of Components depending on the language
chosen for the
document. Drag the FLVPlayback Component from the Components
panel in an
AS3 document, and you'll have the AS3 version.
David Stiller
Co-author, Foundation Flash CS3 for Designers
http://tinyurl.com/2k29mj
"Luck is the residue of good design."

How to update Flash CS3 Pro...

ok here is my situation
i recently set-up a new machine and just installed Flash CS3
Pro (and FMS 3.0.1.111). It had Flash Player 1.0.115.0 so i
download the update APSB08-11 to install Flash Player 1.0.124.0.
The zip file contained a folder with the Players and following the
instructions i just copied the folder in the installation folder of
Flash CS3.
The problem is that when i test a movie in Flash CS3 Pro and
do some traces in the FMS3 Admin Console i get that Agent is
1.0.115.0.
Any ideas how to successfully update the Flash Player for
Flash CS3 Professional to 9.0.124?
I have to mention that
1. for IE7 ActiveX and Mozilla Plug-in i have Flash Player
version 10.0.2.26
2. FMS3 Admin Console is running with Flash Player version
9.0.124.0
I don't think there are any conflicts because i did some
uninstalls and tried again... It just FMS3 keeps report that agent
is 9.0.115 when testing a movie from inside Flash CS3.
Could it be because i still use the trial version of Flash
CS3 Pro? Any ideas?
Thank you in advance.

Not sure I'd want to create something like that in Acrobat.
Can you create it in Word and use screen captures then PDF the end result?

Can't do Publish/Publish Setting a movie in Flash CS3

I installed Flash CS3 while still keeping Flash 8. When I try
to publish/publish setting a movie, an alert pops up saying 'No
valid HTML Templates are available to complete this operation'.
Probably there was a conflict so I uninstalled both Flash
CS3, Flash 8 then installed Flash CS3 but the problem still comes
up. What is that?
Thanks in advance.

Hey,
First of all, thx for the answer.
The publish location is fine; it publishes to the same place,
like b4 the problem. Nice thought though.
What kind of problem could it have? And can it be fixed?
I've tried to rename it. Nothing.
It's a template that I've bought and I have the source file
in a ZIP, so every time it happens, after i've done some changes, I
copy them one by one, and then I publish it again and I'ts fine.
I'm sick of doing it...
What it be possible for you to check the file?
Thx,

Problem with actionscript window in Flash CS3 IDE

The actionscript window doesn't open up for any frames on the
timeline. When I press 'F9' or try to access via context menu the
action window tab appears at the top in minimized form. No matter
how many times I click on it or on the maximize button the window
doesn't open up. I tried reinstalling Flash CS3 but it didn't help.
Any help with this issue is appreciated.
Thanks!

Found a solution for this atlast ! Delete the Users/AppData
folder for flash CS3 and things will be back to normal. It seems
the Flash IDE screws somewhere while saving the local users
settings. Clearing these settings restored my action window
!

Flash CS3 Strange IDE Problem

Similar Messages

Maybe you are looking for