Flash CS3 swf quality on dvd work flow

I have a larage movie that will not export out of flash in avi it stops work windowsexporterserver.exe stops working and it stops. i want the quality i see in swf file and windows exe projector file on dvd and the web Ihave tried everything

I have a flash CS3 movie and the quality in that .swf file and the projector file are great but I need to have this content on DVD and as Web based movie.
The export to movie in flash to either avi or mov file from flash does not even come close to quality that you have when viewing in .swf which is published with no problems from flash. The avi uncompressed file is over 4 gig not usable. All of the other codecs of mpeg stop working unknown error.
So when I import flash .swf into premiere pro CS4 and then try to export to any of the mpeg file types which are suggested the best for dvd and the web the windowsexpoerterexe stops working and the exports stops.
In premiere I try the send direct to encore cs4 and encode stops unknown error
How do I get the quality I see in the .swf and the windows projector.exe onto a dvd
You can see what I have been able to post so far on line but the quality is just not acceptable http://owensarchitects.com/cherokeeoverview.htm
and the DVD version I have been able to produce is even worse so what I missing
Thanks for your time

Similar Messages

Flash CS3 swf viewing @ hyper-speed on IE

Hello-
I have created a slide show from the Flash CS3 template...
inserted in a DW CS3 document. Views/Tests GREAT except from IE...
I'm thinking there must be a special "IE" code... but cannot find
documentation. What's also interesting, I also created a Flash
slide show from a version 6 Flash and inserted in the MX DW...
works like a charm... hmmm???
The examples are found:
http://www.bonanzapress.com/chipsproducts.html
(hyper-speed in IE)
http://www.islandsanctuaryproperties.com/photos.html
(created with the older version of Flash)
THANKS in advance!!
Krys

What version of IE? I would actually strongly discourage
coding anything for IE. It has always been broken. Did you know
that to display PNG graphics properly, you need to enable Active-X
controls? Probably the same thing with Flash. For that reason, I
suggest adding a line to your website that can only be viewed by IE
users that says "Please visit this site using any 32-bit web
browser other than Internet Explorer. Adobe just doesn't have
anyone that is able to compile a 64-bit browser at this time, and
does not support those who know what they are doing. Thank
you."

Flash CS3 trial setup won't work

I downloaed from the Adobe website the trial version of Flash
CS3. However, when I click on the setup exe file the setup screen
shows for a couple of seconds then disappears. Has anyone else
experienced this? My operating system is Vista Home Premium.

Uninstall it, do a reboot, then after you come back from the
reboot, erase the files in c:/program files/adobe/flash cs3/
directory.
Then reinstall flash cs3, works for me if silly things like
that happen.

Export to Flash CS3, SWFs not editable - HELP!

On this page (
http://www.adobe.com/products/captivate/integration/flash/)
it says about exporting to Flash, "Each Adobe Captivate slide is
automatically inserted into the Flash Timeline, with objects,
images, audio, and backgrounds on individually labeled layers.
Similarly, the Flash library is automatically updated with folders
containing all the objects created in Adobe Captivate 3."
This is not working for me. Instead I'm getting a bunch of
movie placeholders on my main timeline, with all the Captivate
slides exported as SWF files, and I'm not able to edit anything.
What am I doing wrong? Does this have something to do with
"full motion"?
-a

a decided to move this thread to the General category. Please
direct any replies to that thread. You may do so by
clicking
this link to visit that thread.

Flash CS3 bringing tears to my eyes...

Hi there,
Please check this screen cap of a "corrupted" Flash CS3 swf :
http://www.fairtraderugs.com/corrupted_swf.png
Can anyone tell me why I'm getting these horrible white
"gaps" appearing in the published SWF(image on the right), but NOT
in the original FLA (image on the left). And perhaps more
importantly is there anything I can do about this corruption?
I had assumed it was something to do with cubic to quadratic
bezier conversion during the import from AI CS3, but I assume as
the Flash IDE can render it correctly this cannot be the cause of
the problem?
Many thanks for your thoughts,
Rich

How is the AI file setup (layers)?
I have seen this before in very rare situations and I know
there's a way to fix it - I am betting
the original image is very small right? If so - scale it up
large - really large - before importing
into Flash. Feel free to send me your Ai file:
chris AT mudbubble DOT com
Chris Georgenes / mudbubble.com / keyframer.com / Adobe
Community Expert
Ensadragon wrote:
> Thanks for your thoughts guys.
>
> The results are identical when publishing to Flash
Player 8 and 7.
>
> Because this is a vector template in a Flex RIA for
customising handmade
> products that have a high price point, it is not
acceptable to continue with
> this level of quality.
>
> I'm reluctant go down the route of exporting to SVG from
AI and migrating to
> Silverlight (I believe they can render cubic beziers at
runtime?), because I've
> become fond of the Flex framework, and I'm looking
forward to hooking this up
> with parts of the Livecycle Enterprise Suite.
>
> However, if I can't get the point of contact with
clients perfect, then all of
> the fun to be had under the bonnet is for nothing.
Usability is everything.
>
> If Flex cannot offer high end graphics integration with
Illustrator, that
> would be disappointing.
>
> Can someone at Adobe please shed some light on the
underlying cause(s) for
> this type of problem, and how to attempt a work around?
>
> Thanks for your help,
> Rich
>
> 
>

Flash CS3 fl.* package cannot be used in Flex Builder 3

Hi,
I was very disappointed to find out that one cannot import
the fl.* package, which is available for flash CS3. I found a work
around by creating swc file and importing them, however it's
disappointing that flash CS3 would have such a major advantage over
Flex Builder 3 when building an Action Script 3.0 Application.
Best, E

I've looked over that sample.
Part of the problem is that I don't have access to
mx.effects. I think this is because that example is a Flex 3
Project and has a MXML file attributed to it. I opened a Flex 3
project and was able to access mx.effects - but my project is
different in that it's an ActionScript project - meaning, I opened
an ActionScript project in Flex Builder 3. Apperantly the
ActionScript projects don't have access to mx.effects.Tween. And
niether do they have access to fl.transitions.Tween. It's strange -
and I'm trying to find a way to access them by connecting the build
path to the Tween classes somehow.
My project preferences already have the fl.* folders in the
build path. It just still doesn't seem to work.

Flash CS3 will not launch

After years of using Flash CS3 on our Windows 7 computer, it would not launch. So we did a system recovery -(everted to factory image), re-installed Windows and updates, installed Flash CS3, then successfully did the license verification. But Flash CS3 will not launch.
We copied the Flash Icon from the Start Menu to the TaskBar. This is the icon we clicked on to do license verification, but now we can't use it to launch Flash CS3.
Thanks for any ideas.
Computer specs:
HP - Pavilion Elite Desktop
AMD Phenom™ II Processor
8GB Memory
1TB Hard Drive
Model: HPE-210y
Window 7 with Service Pack 1; all updates applied as of 10/26/2014
(I realize Flash CS3 is not meant to work on Win 7, but it has for years on this computer and on a Toshiba laptop, also with AMD processor)

Well I decided to reinstall OSX to see if that would help,
and that seemed to fix it. I'm still not sure what the problem was,
but a fresh install seemes to have fixed it :]

Using Vcam with Flash CS3

I installed the adobe vcam extension in my Flash CS3 (Mac)
and it all works
ok except that the vcam frame comes in with a crosshairs
located on the
upper left hand corner of the frame and no matter what I do I
cant get it to
set the crosshairs on the center of the frame.
When I go to use it and test the movie, the vcam action keeps
giving me a
lot of extra white space to the top and left of the screen
rather than show
me the actual frame area that I want to see and zoom into.
Can anyone please tell me how the crosshairs of the vcam
frame can be set to
the center of the frame so that what I really want to frame
and zoom on
actually shows up in the rendered movie? Or is there another
way to make the
vcam frame include the areas that I want instead of giving me
all the
unweanted extra white space?
Thanks a lot for any advice.

I installed the adobe vcam extension in my Flash CS3 (Mac)
and it all works
ok except that the vcam frame comes in with a crosshairs
located on the
upper left hand corner of the frame and no matter what I do I
cant get it to
set the crosshairs on the center of the frame.
When I go to use it and test the movie, the vcam action keeps
giving me a
lot of extra white space to the top and left of the screen
rather than show
me the actual frame area that I want to see and zoom into.
Can anyone please tell me how the crosshairs of the vcam
frame can be set to
the center of the frame so that what I really want to frame
and zoom on
actually shows up in the rendered movie? Or is there another
way to make the
vcam frame include the areas that I want instead of giving me
all the
unweanted extra white space?
Thanks a lot for any advice.

Flash CS3 crashes whenever creating or opening file

Hello,
I am running on Windows XP Flash CS3 professional. I was working on a project and using the text tool to add some text to the project... when I went to paste the content into the text box, the focus went to the font face selection text box and the Flash program crashed.
Now it continues to crash whenever I try to open an existing FLA or create a new file. I restarted the PC several times and this issue continues.
Here is the Application error report from the Event Viewer under Computer Management
Faulting application flash.exe, version 9.0.0.494, faulting module flash.exe, version 9.0.0.494, fault address 0x004ee526.
My next step is to reinstall....hopefully I will not need to do that.
thank you,
Tim

Hello,
Could you please install the new Flash Professional CS6 Update 2? Let us know if you still face crashes.
Regards,
Suhas Yogin

Problem loading flash 5 swf in flash 8

The problem is this:
I am trying to load a flash 5 swf movie using the loadMovie
function.
The problem is that it loads on my computer, but it doesn't
on the client's computer! I have Flash Player 8. Could this be a
problem? Could it be that he's having an older version of Flash
player? I asked him and he didn't answer me yet. So I'm also asking
you...
Do you know what the problem might be???
Here's the code...
loadMovie("game.swf", "gameHolder_mc");
right, not that complicated! :) I can't see why it would work
on ONE computer and NOT WORK on ANOTHER.
Please, can someone help me?
Thanks

if that code works for a flash 8 player it will work for a
flash5 player or later. however, there may be other code in the
flash 8 swf that might not work for an older player.

Flash CS3 deactivate option not available

Hi,
I have a copy of Adobe Flash CS3 Professional installed on my work desktop. I'm soon going offsite for a couple of months during which period I'd be using my work laptop instead. My laptop does not have Flash CS3 on it, so I was hoping of transferring the license to the laptop.
I read somewhere that I need to deactivate the license on my desktop (using Help >> Deactivate license) before uninstalling it. Unfortunately, I don't see that option in the Help menu at all.
Could someone please help??
Thanks!
Mohsin

Looks like you might be using a multi-seat (or otherwise non-retail) version. You may have to contact Adobe Customer Support.
Somewhat related threads:
http://forums.adobe.com/thread/457835
http://forums.adobe.com/message/2137381
Message was edited by: Raymond Basque

.swf file quality to dvd what is the magic path

This has always been a struggle trying to get .swf quality to the DVD and on web. I thought that when Adobe bought flash this will soon be a peace of cake. That has not been the case and I’m still trying to find the magic path. I have recently up graded from premiere 6 to premiere pro CSF to get upgrade of Encore 2.0 and what I thought was the silver bullet .swf import possible to premiere I thought this will cut down on the number of compressions and give the .swf quality on the DVD and much better web based quality as FLV files. The current movie which is by the way a deadline pay the bills type project publish fine as a .swf and has great screen qualities. It is my understanding that the new mpeg codecs that come with this upgrade are the choice for best DVD quality and web production when I import the .swf the movie export works fine for a while then windowsexporter.exe stops working and the process quits. So I guess maybe vista windows thing on my laptop so I up grade on my XP desktop and the program will not run at all and keeps crashing. So I find out file is probably to big to process so I split it down into smaller portion in flash and try to import the new smaller files and get error message file screen size to big when it is set to 720x480. I try sending directly to encore as suggested and get encode stopped unknown error. I can get an windows projector .exe file to process thank goodness that is keeping client happy for now but need to go on line and to dvd soon with much better quality than I get when I can get the movie to process in AVI which is really bad quality and not acceptable to deliver. Thanks in advance for any help deadline May 12 DVD in clients hands so this is chrunch time I need a fix or work around.

I don't think I understand what you mean by "SWF file quality" in relation to Encore.
Are you authoring to DVD? All video in the DVD-Video format is compressed to MPEG-2. If you're using SWF (FLV, really) for you source video, then you are starting with a highly-compressed format to begin with and it will be re-compressed to MPEG-2 when the DVD is built.
If you're not trying to use FLV for your source video, can you please explain the problem?

Error embed / insert Flash CS3 9.0 swf in Acrobat 8.1.2

Goal: embed Flash swf file in Acrobat pdf.
Software: Flash CS3 9.0, Acrobat Pro 8.1.2, Mac OS 10.5.2 (all updates applied as available 3/27/08). If it matters: Quicktime Player 7.4.1. All swf files are associated to open with Flash Player 9 (9,0,115,0).
Hardware: PowerMac Dual 2GHz G5, 9.5 GB RAM
Error Description: This error is seen on 2 out of 3 PowerMacs; the 3rd PowerMac will inexplicably work. Here is what is done to receive error: Open pdf document in Acrobat. Select Movie Tool from Advanced Editing Toolbar, choose swf file from Desktop (pdf file is also saved on Desktop to eliminate network considerations). All defaults are retained in dialog window, when "OK" is pressed, status message "Initializing authoring system" appears and remains indefinitely. "Cancel" is pressed and produces following error message window: "Cannot create the movie annotation because the movie could not be loaded. This can occur if the file cannot be found or the URL is unreachable (make sure proxy server settings are correct)."
Adobe Support claims Leopard incompatibility with embedded Quicktime 7.3.1 (I have updated to 7.4.1). Also, AS recommended file association of swf to Flash Player exclusively. Have taken all actions recommended...still have problem.
Anyone have any ideas?

I believe that the latest version of QuickTime which you no doubt have installed does not support the latest version of Flash (9.0). Since Acrobat depends on QuickTime for multimedia in Acrobat 8 Professional, this feature breaks.
What needs to happen is for the next version of Acrobat to support Flash directly, not using QuickTime.

Work Flow for FCP-Motion-DVD Studio

All right, this is all new. Earlier this morning, I was able to finally go from FCP to Motion to DVD Studio, burned a DVD, and was able to play it on MAC, PC and home DVD player. Then, I edited another video in FCP, and think I lost the handle.
What is the work flow and what are the export/import settings for broadcast quality when needing to edit in FCP, add changes in Motion, and Burn in DVD Studio:
1. Edit in FCP, export as what?
2. Open Motion and import ??, make edits, export as what ??
3. Open DVD Studio, import ??, create menu, etc., build and format, then Burn.
Do I bring it in to Compressor out of FCP? I don't want to compress it.
Thanks
g5 Mac OS X (10.3.9)

umm, you'll find answers for these questions in those big books that came in your software boxes. you're asking questions that only you can determine based upon the video format you're working with, the graphics you want to use and how much video you're wanting to stick on a dvd.
you have to compress to mpeg2 to get whatever video you're working with in fcp onto a dvd.
time to open the manuals and do the tutorials.

Getting Flash CS3/CS4 AIR1.0 app to work in Flash CS5

This is a question in regards to Flash CS5 but since it's specific to AIR I'm posting here.
I have a Flash CS3 AIR 1.0 project and I can't get it to compile in Flash CS5. If I recall I installed some extension for Flash CS3 to be able to create AIR apps. It was an Adobe extension.
The app involves two SWFs. The first is the main app, Main.fla, the second is a window panel template, Panel.fla. The Main app would compile and include the Panel.swf which it would instantiate and load into new windows to create a paneled app.
I was able to open Main.fla and publish in CS5 with no problems. The profile even says AIR 1.0 in the properties panel, although when I click edit it shows AIR 2.0 selected in the dropdown, and there is no option for another version of AIR -- which version of AIR is actually being created? Not important as long as it work...
The Panel.fla on the other hand I cannot get to compile. The profile still says AIR 1.0 in properties but the dropdown in the publish settings says Flash Player 9, and when I compile it breaks on any AIR references, for instance:
1119: Access of possibly undefined property nativeWindow through a reference with static type flash.display:Stage.
I have this classpath:
$(AppConfig)/ActionScript 3.0 AIR 1.0/Classes
But apparently that is no longer good. I've looked in all the Flash CS5 directories I could find and there is no such dir.
The issue here is that Panel.fla is NOT an AIR app, it's a SWF which runs in an AIR app. How should get this working?

I changed the profile of both to AIR2.0, and it still shows AIR1.0 in the properties panel. I'm able to publish the Panel.swf now but it also generates an unwanted panel-app.xml -- unwanted because panel is not an app, it's merely a SWF to run inside the main app.
Is there a better way? And why does it still say AIR1.0 in the properties panel?

Flash CS3 swf quality on dvd work flow

Similar Messages

Maybe you are looking for