Flash CS3 timeline display problems
I have just upgraded to Flash CS3 and immediately noticed a
problem when viewing and working with the Timeline window. When I
click on a frame (keyframe or other) it highlights that frame
completely white, which means I can no longer tell what type of
frame it is. The same happens if I highlight a series of frames,
they are all white and hard to interact with. If I highlight a
series of frames and attempt to Right-Click, I can rarely get a
sub-menu to show for quick options like 'Remove Frames' and 'Create
Motion Tween'. Most of the time my Right-Click is ignored
completely (ie nothing happens).
I have searched Google, Flashkit and Adobe site for help with
this, but no love. Has anyone else experienced this problem? The
rest of my CS3 install is working perfectly.
Computer: 20" iMac Intel 2.16Ghz Core 2 Duo, 2Gb RAM, 250Gb
HDD (~100Gb Free)
OS: Mac OS X 10.4.9
Version: Adobe Flash CS3 Version 9.0
quote:
Originally posted by:
sczulu
Since upgrading from Flash V8, I'm having an issue where
prominent fonts (such as Myriad Pro) appear jaggy until the file is
published, making layout and design difficult. I've checked the
text display settings with now change in appearance. The files do
publish with anti-aliased text.
I've noticed this issue as well and was wondering why I was
having a problem, thanks for answering that question.
Similar Messages
-
Adobe Flash CS3 detected a problem and has to be closed.
Hello,
I'm using Flash CS3 for a month, but the problem is that
since a week ago, flash CS3 stops working after 5 minutes of use.
So today I've downloaded the test version (30 days) in
another PC, but even with this other computer the software doesn't
works and has to be closed.
So that's not because of my computer. It's a more general
problem.
Did it happened to one of you? DO you know if flash CS3
doesn't work for everyone right now?
Do you know how to repair this kind of problem? I'm very
desperate and I really need to use flash. I don't know what to do.
Thank you very muchThere could be any number of items causing this. First off is do you have an active internet connection? If so have you tried rebooting you computer?
-
Flash CS3 - Odd button problem
Hello, Ive upgraded to Flash CS3 and I'm having a problem
with buttons.
When I open up my site, the old buttons work fine to navigate
the site and open up URL links. I have the actions on their own
layer instead of having an onRelease on each button.
However, when I create new buttons, they don't work.
I've even tried copying the existing working buttons,
applying the exact same actionscript to figure out what's going on,
but that also doesn't work, those buttons won't open up the URLs.
Am I perhaps using the wrong publish settings/flash player
choice?
ThanksThe answer is "skins" just search under "Creating skins for
some instances" in the Flash CS3 help file. -
I am stumped and so is everyone I know. I have several clips that do not work properly once I place them onto the timeline.
The audio plays fine but the video doesn't. All it shows is a single frame. The footage works fine in the Viewer but not in Canvass once i have placed it into the timeline. It seems to be a problem with _only a few of the clips._ Most of them work just fine. The video plays in the timeline for a while but once it comes to a cut where the source comes from one of these clips it shows only a single frame.
Here is the kicker. The frame that is shown is always from a different clip. Never from the actual source.
I know this is a display problem because I have tried Exporting the timeline with a few of these glitches present and the cut comes out just fine. That is a comforting thought but I do need to see what I am working on.
Please, please help me. Is there a setting i need to change to either the clip or the Canvass? Is this a hardware problem? Am I being a complete amateur? Please help.I was hoping that wouldn't be what you would say but I was beginning to think the clips were exported wrong. Thanks. Sorry for the double posting. I was having trouble finding this original post. I thought it had been deleted. It has happened before. Not on Apple.com but elsewhere.
-
Flash cs3 animation freeze problem
The subject of this post is seeking help to the following
problem: As i get 3/4 through my animation my flash cs3 suddenly
freezes down on me and the only thing that helps is closing it down
from the task manager. All the other applications run perfectly
well in the background. Got a pretty good system (3GB ram, vista,
dual core processor). Can anyone help!!!Ни когда
больше не
буду
пользоваться
adobe Flash CS3 ,потому
что он
перезагружает
мой
компьютер.
Наверное
когда её
делали
перестарались. -
Hi --
I am having a totally bizarre issue with the Flash CS3 IDE in
that my
"Output" window is always blank. This just started happening
to me today. I
have tried creating a new Flash movie and putting in a single
line of
Actionscript:
trace("Hi")
When I run the movie the Output window pops up but its blank.
Any ideas?
Thanks
RichHi --
It was the "filter level" setting. I changed it from "none"
to "verbose" and
all is good. I never even knew that setting existed so I have
no idea how I
changed it! Thank you so much.
Rich
"Noelbaland" <[email protected]> wrote in
message
news:g8t2nd$4nh$[email protected]..
> Try this. Open your Output window and go to the options
menu in the top
> right
> corner. In the menu go down to Filter Level and just
check that None is
> not
> checked. If nothing is checked then choose Verbose
>
> Another thing you can check is in the Publish Settings
under the Flash
> tab.
> See if the Omit trace actions has been checked - uncheck
it if it has.
>
> Hope that helps!
> -
Flash cs3 and php problem (system error)
Hi All,
Been checking out a free utility, called Tell A Friend - followed the instructions to a t but still getting system error.
Here is the php code:
<?php
$to = ($_POST['friend']);
$link = ($_POST['link']);
$subject = "Tell a friend";
$message = "Your friend ";
$message .= $_POST['name'] . " wants advice you the following link: ".$link;
$headers = "My WebSite Name";
if(@mail($to, $subject, $message, $headers))
echo "answer=ok";
else
echo "answer=error";
?>
The main swf has a main.as attached:
* Flash Tell A Friend
* http://www.FlepStudio.org
* Author: Filippo Lughi
* version 1.0
package
import flash.display.*;
import flash.events.*;
import flash.utils.*;
import flash.external.*;
import flash.net.*;
public class main extends MovieClip
private const PHP_URL:String="sendMail.php";
private var checker:CheckEmail;
private var timer:Timer;
public function main()
addEventListener(Event.ADDED_TO_STAGE,init);
private function init(evt:Event):void
removeEventListener(Event.ADDED_TO_STAGE,init);
stage.frameRate=31;
checker= new CheckEmail();
addInputListener();
addSendListener();
private function addInputListener():void
clip_mc.name_txt.background=true;
clip_mc.name_txt.backgroundColor=0x999999;
clip_mc.name_txt.addEventListener(FocusEvent.FOCUS_IN,onFocusIn);
clip_mc.name_txt.addEventListener(FocusEvent.FOCUS_OUT,onFocusOut);
clip_mc.email_txt.background=true;
clip_mc.email_txt.backgroundColor=0x999999;
clip_mc.email_txt.addEventListener(FocusEvent.FOCUS_IN,onFocusIn);
clip_mc.email_txt.addEventListener(FocusEvent.FOCUS_OUT,onFocusOut);
private function onFocusIn(evt:Event):void
evt.target.background=true;
evt.target.backgroundColor=0xFFFFFF;
private function onFocusOut(evt:Event):void
evt.target.backgroundColor=0x999999;
private function addSendListener():void
clip_mc.send_mc.mouseChildren=false;
clip_mc.send_mc.buttonMode=true;
clip_mc.send_mc.addEventListener(MouseEvent.MOUSE_DOWN,onSendDown);
private function onSendDown(evt:MouseEvent):void
if(clip_mc.name_txt.text!="")
if(checker.initCheck(clip_mc.email_txt.text))
sendEmail();
else
displayPhrase("Invalid Email");
else
displayPhrase("Invalid name");
private function sendEmail():void
clip_mc.send_mc.mouseEnabled=false;
var variables:URLVariables=new URLVariables();
variables.name=clip_mc.name_txt.text;
variables.friend=clip_mc.email_txt.text;
variables.link=ExternalInterface.call('window.location.href.toString');
var request:URLRequest=new URLRequest();
request.url=PHP_URL;
request.method=URLRequestMethod.POST;
request.data=variables;
var loader:URLLoader=new URLLoader();
loader.dataFormat=URLLoaderDataFormat.VARIABLES;
loader.addEventListener(Event.COMPLETE,onMessageSent);
try
loader.load(request);
catch (error:Error)
trace('Unable to load the document.');
private function onMessageSent(evt:Event):void
var vars:URLVariables=new URLVariables(evt.target.data);
if(vars.answer=='ok')
displayPhrase("Message Sent!");
else
displayPhrase("System Error!");
clip_mc.send_mc.mouseEnabled=true;
clip_mc.name_txt.text="";
clip_mc.email_txt.text="";
private function displayPhrase(s:String):void
clip_mc.display_txt.text=s;
resetPhrase();
private function resetPhrase():void
timer=new Timer(1500,1);
timer.addEventListener(TimerEvent.TIMER,hidePhrase);
timer.start();
private function hidePhrase(evt:TimerEvent):void
clip_mc.display_txt.text="";
Any help appreciated. This is a great viral marketing tool, when it ever works
Kind Regards,
Boxing BoomNever seen such an error, but if it's in the status bar of the browser then it shouldn't be Flash problem. You can check what's happening in your swf by creating a dynamic text field and setting it's text in every major action, that is: requesting PHP and getting back response, to what's just happened.
So, on the Flash side you can see whether the browser error stops the PHP script and immobilizes further actions.
What I'd do is create a new Flash file and PHP file and just send 1 variable to PHP, change it somehow and send it back to Flash and print it in a text field. That way you can check whether it's the method you're using to request PHP or just PHP or something else. Step by step adding complexity and checking on which of these steps the error occurs.
I wish you good luck.
Ps. It's probably a very rookie problem, we just don't know the source. -
Inserting Flash Video causes display problems in Google Chrome
Hi all,
I have tried in insert a Flash Video (.flv) into Dreamweaver using the Insert > Media > Flv command.
The video looks fine in both Firefox and Interent Explorer. The problem is Google Chome does not display the video at all. It shows a white background. As I right+click onto Google Chrome, it says About Flash Player which means it is already installed into the browser.
Does anybody know how to resolve this issue?
Thanks!clavin007 wrote:
Does anybody know how to resolve this issue?
Well certainly not without seeing your code.
Please be kind enough to post a link to your page. -
Ok. So I have a file that was originally created with Flash
8. The file was opened in Flash 9 and published. The problem is
that the text that I have in there is being cut off when published
(publish preview only, The full publish works fine so far). I've
narrowed it down to being a problem with the filters that are used.
I'm using a basic drop shadow on the static text.
More specifically, when I publish using Flash 7, filters are
not supported and they are dropped out and the entire word shows.
When I publish in Flash 8 or 9 with filters turned on, the words
are cut off. For example the word "connection", when a filter is
applied, all that publishes is "connecti". The o and n are gone.
And if I change the settings on that drop shadow filter, the word
is cut off in a different place than before, sometimes cutting a
letter in half. When I delete the filter and publish in 8 or 9, the
entire word shows again. Also, I can edit the blurX or Y, or the
strength or distance and it will sometimes show the entire word.
But when I do this to other words, it creates a problem on those
words. If I then go and edit the settings back or to different
numbers, cutoff happens once again.
This is very inconsistent and makes working with filters
difficult since I can't preview what I've done without doing a full
publish. I've converted the words to movie clips and so far have
not had the same problem, however, I don't want to add movie clips.
So this basically looks like a glitch with this new version of
Flash. I sure hope that someone at Adobe sees this post and might
look into the problem.
I'm on an Intel based MacBook Pro. If anyone has run into
this problem, please let me know if you have found there to be a
solution rather than a work around. Thanks to Anyone who can help.
And once again, this only appears to be a problem when I do a
publish preview, not a full publish.
TobinThanks; thats helpful.
What's going on is that the filter is being reused for your
text instances.
Flash does automatic associations between frames to see where
some objects
should be instances of or related to the objects in the frame
before it. In
your case, since each of your frames have a single static
text field in the
same depth (one spot above the jump in button), and since
they all use the
same drop shadow filter with the same settings, Flash will
reuse that exact
same filter for each of the objects in consecutive frames at
those depths
assuming they are the same object. What this amounts to is
the bounding box
for the first text+filter combination being used for all
others. You can
see this more clearly if you move the "Love" text to be at
the beginning of
the sequence and then test your movie.
What can you do? Here are a few options (though only a few
may work in your
situation):
- include one frame between each text field
- on every other text field, modify a property of the filter,
either
adjusting the strength by a value of 1, changing the quality,
or something
not visible but enough to make Flash recognize it as a
different filter
- in a layer under every other textfield place an invisible
object. This
should force every other text field to be at a higher depth
thereby
preventing Flash from assuming they are the same object as
the one before
it.
- place each text field in a movie clip thereby separating
the filters from
the same timeline (or, technically, just every other text
field would be
necessary)
- change your text to dynamic text. These will be treated as
separate
instances (or at least Flash will be wise enough not to be so
static in its
application of the filter). You may need to be sure to embed
your fonts for
anti-aliasing
In the mean time I will officially log a bug. Though Flash is
"technically"
doing what it thinks is best, its not working out very well
for this case.
"PhoTobin" <[email protected]> wrote in
message
news:[email protected]...
>I have not scaled the text at all. We've just used font
size. Here is the
>link to download the FLA.
>
>
http://www.3peaksintl.com/intro-filter.zip -
Since upgrading from Flash V8, I'm having an issue where
prominent fonts (such as Myriad Pro) appear jaggy until the file is
published, making layout and design difficult. I've checked the
text display settings with now change in appearance. The files do
publish with anti-aliased text.quote:
Originally posted by:
sczulu
Since upgrading from Flash V8, I'm having an issue where
prominent fonts (such as Myriad Pro) appear jaggy until the file is
published, making layout and design difficult. I've checked the
text display settings with now change in appearance. The files do
publish with anti-aliased text.
I've noticed this issue as well and was wondering why I was
having a problem, thanks for answering that question. -
Dreamweaver / Flash CS3 Host Server problem
I've created my flash inserted it into dreamweaver, previewed it and uploaded the pages and the JS files to my host server again and again and it everything shows up but the flash, nothing, not even a box. Any ideas on what the problem could be? They show up in the root directory on the server. the file I used was the SWF. file. Is there another way to do this?
I've tried moving the js. script around (someone said put it inside a file named "script". that didn't work either.
RobHi,
I suggest posting this question in the "Dreamweaver General Discussion" forums, as it´s not related to the Dreamweaver Developer Toolbox
(ADDT) extension.
Günter Schenk
Adobe Community Expert, Dreamweaver -
Flash CS3/CS4 Sound Problem
Hi,
I am trying to create a soundboard and I have all my buttons and stuff, the only thing left is to put the sound files in. However, I have tried adding them to the library and dragging and dropping them over the HIT option like I usually do, but when I export the swf file, the sound file sounds terrible, it crackles and sometimes stutters a bit. I have tried setting these sound files to mp3 and raw in adobe options but with no luck. I am using actionscript 2.0 if that has anything to do with it. Also, I need these files embedded, not just linked. Please let me know any suggestions you might have.
Thanks.In the Export Settings dialog, go to the Flash tab and look at the Images and Sounds section. Check the Audio Stream and Audio Event settings. It's a common occurrence for the sound to be set to a low data rate and monophonic. If so, click both of the Set buttons and adjust the compression, bit rate and quality settings.
-
Can't do Publish/Publish Setting a movie in Flash CS3
I installed Flash CS3 while still keeping Flash 8. When I try
to publish/publish setting a movie, an alert pops up saying 'No
valid HTML Templates are available to complete this operation'.
Probably there was a conflict so I uninstalled both Flash
CS3, Flash 8 then installed Flash CS3 but the problem still comes
up. What is that?
Thanks in advance.Hey,
First of all, thx for the answer.
The publish location is fine; it publishes to the same place,
like b4 the problem. Nice thought though.
What kind of problem could it have? And can it be fixed?
I've tried to rename it. Nothing.
It's a template that I've bought and I have the source file
in a ZIP, so every time it happens, after i've done some changes, I
copy them one by one, and then I publish it again and I'ts fine.
I'm sick of doing it...
What it be possible for you to check the file?
Thx, -
How to update Flash CS3 Pro...
ok here is my situation
i recently set-up a new machine and just installed Flash CS3
Pro (and FMS 3.0.1.111). It had Flash Player 1.0.115.0 so i
download the update APSB08-11 to install Flash Player 1.0.124.0.
The zip file contained a folder with the Players and following the
instructions i just copied the folder in the installation folder of
Flash CS3.
The problem is that when i test a movie in Flash CS3 Pro and
do some traces in the FMS3 Admin Console i get that Agent is
1.0.115.0.
Any ideas how to successfully update the Flash Player for
Flash CS3 Professional to 9.0.124?
I have to mention that
1. for IE7 ActiveX and Mozilla Plug-in i have Flash Player
version 10.0.2.26
2. FMS3 Admin Console is running with Flash Player version
9.0.124.0
I don't think there are any conflicts because i did some
uninstalls and tried again... It just FMS3 keeps report that agent
is 9.0.115 when testing a movie from inside Flash CS3.
Could it be because i still use the trial version of Flash
CS3 Pro? Any ideas?
Thank you in advance.Not sure I'd want to create something like that in Acrobat.
Can you create it in Word and use screen captures then PDF the end result? -
Problem displaying dynamically loaded text in Flash CS3
I created a Flash CS3 application that does not display
dynamically loaded text (from internal AS3 scripts) on 3/6 of my
client's computers. All computers run IE 6 and Flash Player 9. I
cannot replicate the problem on any computer in my department. The
problem seems to be related to Flash Player 9 or a browser
setting/IT restriction. Has anyone encountered this? If so, have
you found a solution?
If I cannot find a solution, then I will need to almost
completely redo the application.
One slightly insane idea I have considered is to, if
possible, convert dynamically loaded text to an image real-time. Is
that possible?
Btw, I have created a font in my library. Should I try
manually embedding the font from the Properties menu and selecting
all characters?
Thanks in advance.yes, even though you may be using a font from the library,
you still have to specify that each text field that uses that font
embeds the font, and you'll need to select all characters(well not
all, unless you require all the different scripts of the world -
upper-case, lower-case, numerals and punctuation usual suffices).
I bet if you checked, the computers where the font did not
appear did not have the font on their system.
Good luck
Craig
Maybe you are looking for
-
How do I encrypt a folder for email
I'd like to encrypt, ideally compress and encrypt a series of pdfs and mail them to a Windows person. I know stuffit does that but it is cumbersome and I have an old version. Any ideas on a modern utility - or using OSX
-
I cannot update Photoshop cc, Photoshop cc(2014), Bridge cc. (U43M1D204) But I could do in Lightroom 5, Lightroom cc(2015). I've tried many times it comes out the same.
-
How to combine several files into one?
How to combine several pdf files into one?
-
Default namespace have to be the first in xmlnamespaces()
Hi, for some reason default namesapace have to be the first namespace and then you can add other namespaces. SQL> select * from v$version; BANNER Oracle Database 10g Enterprise
-
Planned Order Creation after Sale Order MRP MD50
In a BOM of FERT material, one HALB material is present at different BOM levels. When we run sale order MRP (MD50), system will create one planned order for complete quantity (total qty of HALB material at all levels put together). Is there any way,