? Flash CS4, Is it possible to adjust the length of multiple timelines at once?

Hi,
I am using Flash CS4. Is there any way to adjust the length of multiple timelines at once? I am doing an animation of leaves falling from a tree. The leaves alone have 17 separate timelines on separate layers plus each has it's own guide layer.
If I had the ability to to select all of the timelines together and adjust all of their respective start and end times at the same same time, relative to each other as well as separately, life would be so much easier!
Of course I can do it timeline by timeline, no problem, but I can't seem to adjust the length of more than one timeline at a time. (no pun intended)
Even when I select more than one timeline, the double arrow only adjusts the length of one timeline. Even each guide layer's length has to be adjusted separately. I understand the benefit of this, but, testing timing and making adjustments would be so much simpler and go so much faster if I could select and drag multiple timeline lengths at the same time.
Is there any way to do this?
I'm new to Flash so, thanks in advance for your patience with me!
SabelV

Thanks! I had a feeling. It's nice to have the answer. Oh well, now I can get back to work and not waste any more time with that part of the puzzle. You've been very helpful and I'm sure your answer is correct. Wish I knew how to rate your answer even higher. Thanks again!

Similar Messages

How do I adjust the levels of multiple images at once?

CS6 user, I recently scanned a few pages of an old black and white comic, which thanks to the passage of time are now more black and beige.
I know how to adjust levels using the eyedropper tool but is there a way to apply the same effect to several images in one go (i.e. adjust the levels of one image then apply the same effect to the others as a batch of files), rather than pressing ctrl+alt+l and saving each image individually?
Thanks

You can also select all of the images in bridge, go to Tools, Photoshop, Load files into layers. Then select all layers, put them into a group (Cmd G), add layer mask to the group and do the levels there.

Is it possible to change the length of a note in the score editor?

I thought I saw somewhere that it was now possible to adjust the length of a note in the score editor graphically, i.e. by clicking on the note and somehow adjust its length directly to change it from 1/4 note to 1/8 (for example).
I don't want to do this by going over to the "Length" dialog on the left because I hate having to switch from thinking in terms of music notation and then having to think (temporarily) in MIDI ticks per beat, etc.
I must admit that I'm finding it extremely frustrating to simply enter music into Logic in a score....I thought this was supposed to be one of its strengths but it seems to be providing amazing capabilities at the expense of ease of use for beginners.

dhjdhj wrote:
I thought I saw somewhere that it was now possible to adjust the length of a note in the score editor graphically, i.e. by clicking on the note and somehow adjust its length directly to change it from 1/4 note to 1/8 (for example).
greetings dh... are you into Key Commands? There are two which will help you do the above in a trice:
• Nudge Region/Event Length Right by SMPTE Frame
• Nudge Region/Event Length Left by SMPTE Frame
I set mine to the simple letter o and n
- I click on a note and press o repeatedly.. it grows and grows longer and longer
– I click on a note and press n repeatedly.. it shrinks and shrinks shorter and shorter
All by little increments
If you keep a Piano Roll window open while you do this, you can see the length do this exactly
man, it is VERY quick and handy for changing the length of notes
It really helps to have a view of the midi Piano Roll to cross check the exact length and position of the notes.
Check out the Key Commands:
• Set Next Higher division
• Set Next lower division
These change the note value in the transport bar near the time signature. Your time signature may be 4/4 but the "grid" on which the notes are appear in the Piano Roll could be displayed in quarter, 8th or 16th notes. If you experiment with these commands, then you can match the note lengths easily to the grid display visually (with the above nudge length commands)
Also - you may like to experiment with the following 3 KEY Key Commands:
1 • Nudge Region/Event Position Right by Nudge Value
2 • Nudge Region/Event Position Left by Nudge Value
This will move your selected notes forward in time or back in time according to the
value that is set in the Transport bar - say it is 16ths .. then each press of the key will move the notes a 16th
or if the value is 8th notes, then each press of the key forward or backwards will move the selected notes forward or back by this amount
... amazingly useful when you are taking a whole phrase and pasting it somewhere else, or if say you started to write a phrase in the Score Editor and you started on the wrong beat.. then you just Nudge back and forth
3 • Set Nudge Value to Division
.. this will in a trice change change the Nudge Value to whatever Note division value is set in the Transport bar
HTH and forgive me if I have given you too much information
..problem is I spent too much time in the Transport Bar in Los Angeles last year drinking with the iSchwartz and other Logic reprobrates... you should join us some time

Android development with Air 2.5 with Flash CS4 is this possible?

Can anyone point me where or fill me in on if this is possible which I think it is... I need to figure out how to set up flash cs4 with the AIR 2.5 SDK Because I think it is possible to still build the air app in cs4 and then package it for android using the sdk adt.bat??? Any tutorials or info on this would be great I'm struggling to find any real clear answers everything really mentions cs5 or flash builder... Thanks answers greatly appreciated!!!

This was part of the AIR 2.0 beta release note, but I used this for 2.5 and it works nice.
You can try it too an make sure you use 2.5 wherever the not says 2.0beta2.
Goodluck.
How to Update Flash CS4 to Use the AIR 2 Beta SDK
If you use Flash CS4 Professional to build Adobe AIR applications, please follow the instructions below to manually update the version of the AIR SDK to use version 2.0.
Update Flash CS4 Professional to version 10.0.2 at http://www.adobe.com/support/flash/downloads.html or select "Help > Updates... " from within Flash CS4.
Quit Flash CS4 Professional if it is open.
Navigate to the Flash CS4 installation folder. The default location on Windows is "C:\Program Files\Adobe\Adobe Flash CS4\" and on Mac OS "/Applications/Adobe Flash CS4/"
Within the "Adobe Flash CS4" folder you should see a folder called "AIK1.5". If this folder is not present repeat step #1.
Rename the folder "AIK1.5" to "AIK1.5 OLD" or delete it if you do not need to save a copy of it.
Make a new folder called "AIK1.5"
Download the Adobe AIR 2 SDK from the labs website and uncompress the contents of the folder to the new "AIK1.5" folder you just created.
Copy the "airglobal.swc" file located within the "Adobe Flash CS4/AIK1.5/frameworks/libs/air/" folder into the "Adobe Flash CS4/Common/Configuration/ActionScript 3.0/AIR1.5/" folder.
Flash CS4 is now configured to use the AIR 2 beta 2 SDK.
In order to take advantage of the new AIR 2 beta 2 features, you will need to update your application descriptor file to use the "2.0beta2" namespace.

Why is the number "1" when setting up the dial fat thickness did not change the font? Is it possible to adjust the font in the thick klavioture typing?

Why is the number "1" when setting up the dial fat thickness did not change the font? Is it possible to adjust the font in the thick klavioture typing?

paulcb wrote:
Using the Bold Text Accessibility option does make the keypad numbers a little bolder.
Yep - I was only looking at Text Size.
But still, not sure what the deal is. The "1" is just as readable as any other number on the keyboard regardless.

Is it possible to adjust the size of an inputText to the column size ..?

Is it possible to adjust the size of an inputText that it correspond to the column size in a af:table.
Thanks

I don't need 30% ... i just need that me tree as a mininal width
Here is my page :
<af:panelBorder>
<f:facet name="top">
<af:panelHeader text="#{res['classification.repository.entryList.panelHeader.title']}"/>
</f:facet>
<f:facet name="left">
<af:panelGroup layout="vertical">
<af:panelHeader text="#{res['classification.repository.entryList.list.panelHeader.title']}">
<af:tree value="#{bindings.ClassificationEntryListclassificationEntry.treeModel}"
var="node">
<f:facet name="nodeStamp">
<h:panelGroup>
<af:commandLink text="#{node.classificationEntryCategoryCode} #{node.classificationEntryCode}"
shortDesc="#{res['classification.repository.entryList.tree.commandLink.shortDesc.textPart1']} #{node.classificationEntryStatus} #{res['classification.repository.entryList.tree.commandLink.shortDesc.textPart2']}#{node.classificationEntryCodeFullPath}">
<f:param name="selectedIdentification"
value="#{node.classificationEntryIdentification}"/>
</af:commandLink>
</h:panelGroup>
</f:facet>
</af:tree>
</af:panelHeader>
</af:panelGroup>
</f:facet>
<af:panelGroup layout="vertical">
<af:panelHeader text="#{res['classification.repository.entryList.node.panelHeader.title']}"
binding="#{backingRepositoryEntryList.entryNodePanelHeader}">
<af:showDetailHeader text="#{res['classification.repository.entryList.base.panelHeader.title']}">
<af:panelForm>
<af:inputText value="#{bindings.classificationEntryCategoryCode.inputValue}"
label="#{bindings.classificationEntryCategoryCode.label}"
required="#{bindings.classificationEntryCategoryCode.mandatory}"
columns="#{bindings.classificationEntryCategoryCode.displayWidth}">
<af:validator binding="#{bindings.classificationEntryCategoryCode.validator}"/>
</af:inputText>
<af:inputText value="#{bindings.classificationEntryCode.inputValue}"
label="#{bindings.classificationEntryCode.label}"
required="#{bindings.classificationEntryCode.mandatory}"
columns="#{bindings.classificationEntryCode.displayWidth}">
<af:validator binding="#{bindings.classificationEntryCode.validator}"/>
</af:inputText>
<af:inputText value="#{bindings.classificationEntryCodeFullPath.inputValue}"
label="#{bindings.classificationEntryCodeFullPath.label}"
required="#{bindings.classificationEntryCodeFullPath.mandatory}"
columns="#{bindings.classificationEntryCodeFullPath.displayWidth}">
<af:validator binding="#{bindings.classificationEntryCodeFullPath.validator}"/>
</af:inputText>
<af:inputText value="#{bindings.classificationEntryIdentification.inputValue}"
label="#{bindings.classificationEntryIdentification.label}"
required="#{bindings.classificationEntryIdentification.mandatory}"
columns="#{bindings.classificationEntryIdentification.displayWidth}">
<af:validator binding="#{bindings.classificationEntryIdentification.validator}"/>
</af:inputText>
</af:panelForm>
</af:showDetailHeader>
<af:showDetailHeader text="#{res['classification.repository.entryList.mainTitle.panelHeader.title']}">
<af:table value="#{bindings.ClassificationEntryTitleclassificationEntryMainTitle.collectionModel}"
var="row"
rows="#{bindings.ClassificationEntryTitleclassificationEntryMainTitle.rangeSize}"
first="#{bindings.ClassificationEntryTitleclassificationEntryMainTitle.rangeStart}"
emptyText="#{bindings.ClassificationEntryTitleclassificationEntryMainTitle.viewable ? 'No rows yet.' : 'Access Denied.'}"
selectionState="#{bindings.ClassificationEntryTitleclassificationEntryMainTitle.collectionModel.selectedRow}"
selectionListener="#{bindings.ClassificationEntryTitleclassificationEntryMainTitle.collectionModel.makeCurrent}"
width="100%">
<af:column sortProperty="language" sortable="true"
headerText="#{bindings.ClassificationEntryTitleclassificationEntryMainTitle.labels.language}"
width="20%">
<af:inputText value="#{row.language}" simple="true"
required="#{bindings.ClassificationEntryTitleclassificationEntryMainTitle.attrDefs.language.mandatory}"
columns="#{bindings.ClassificationEntryTitleclassificationEntryMainTitle.attrHints.language.displayWidth}"
inlineStyle="width: 100%"/>
</af:column>
<af:column sortProperty="content" sortable="true"
headerText="#{bindings.ClassificationEntryTitleclassificationEntryMainTitle.labels.content}">
<af:inputText value="#{row.content}" simple="true"
required="#{bindings.ClassificationEntryTitleclassificationEntryMainTitle.attrDefs.content.mandatory}"
columns="#{bindings.ClassificationEntryTitleclassificationEntryMainTitle.attrHints.content.displayWidth}"
inlineStyle="width: 100%"/>
</af:column>
<f:facet name="selection">
<af:tableSelectOne text="Select and">
<af:commandButton text="Submit"/>
</af:tableSelectOne>
</f:facet>
</af:table>
</af:showDetailHeader>
<af:showDetailHeader text="#{res['classification.repository.entryList.complementaryTitle.panelHeader.title']}">
<af:table value="#{bindings.ClassificationEntryTitleclassificationEntryComplementaryTitle.collectionModel}"
var="row"
rows="#{bindings.ClassificationEntryTitleclassificationEntryComplementaryTitle.rangeSize}"
first="#{bindings.ClassificationEntryTitleclassificationEntryComplementaryTitle.rangeStart}"
emptyText="#{bindings.ClassificationEntryTitleclassificationEntryComplementaryTitle.viewable ? 'No rows yet.' : 'Access Denied.'}"
selectionState="#{bindings.ClassificationEntryTitleclassificationEntryComplementaryTitle.collectionModel.selectedRow}"
selectionListener="#{bindings.ClassificationEntryTitleclassificationEntryComplementaryTitle.collectionModel.makeCurrent}"
width="100%">
<af:column sortProperty="content" sortable="true"
headerText="#{bindings.ClassificationEntryTitleclassificationEntryComplementaryTitle.labels.content}"
width="20%">
<af:inputText value="#{row.content}" simple="true"
required="#{bindings.ClassificationEntryTitleclassificationEntryComplementaryTitle.attrDefs.content.mandatory}"
columns="#{bindings.ClassificationEntryTitleclassificationEntryComplementaryTitle.attrHints.content.displayWidth}"
inlineStyle="width: 100%"/>
</af:column>
<af:column sortProperty="language" sortable="true"
headerText="#{bindings.ClassificationEntryTitleclassificationEntryComplementaryTitle.labels.language}">
<af:inputText value="#{row.language}" simple="true"
required="#{bindings.ClassificationEntryTitleclassificationEntryComplementaryTitle.attrDefs.language.mandatory}"
columns="#{bindings.ClassificationEntryTitleclassificationEntryComplementaryTitle.attrHints.language.displayWidth}"
inlineStyle="width: 100%"/>
</af:column>
<f:facet name="selection">
<af:tableSelectOne text="Select and">
<af:commandButton text="Submit"/>
</af:tableSelectOne>
</f:facet>
</af:table>
</af:showDetailHeader>
</af:panelHeader>
</af:panelGroup>
</af:panelBorder>

Is it possible to adjust the size of the columnes when send alv by mail ?

is it possible to adjust the size of the columns when send alv by mail ?
i send alv ( list ) by mail , work fine but all the columns are small and in the
same size , can i adjust it in the mail ?
how to do it in regular alv i know it .
LS_FCAT-OUTPUTLEN = 29 .

is it possible to adjust the size of the columns when send alv by mail ?
i send alv ( list ) by mail , work fine but all the columns are small and in the
same size , can i adjust it in the mail ?
how to do it in regular alv i know it .
LS_FCAT-OUTPUTLEN = 29 .

How is it possible to adjust the background images and the text in Mail?

How is it possible to adjust the background images and the text in Mail?

Here's the solution I used to solve the same problem. If you're not comfortable editing the source files, this might be more than you want to take on--but I've done it to several files with no ill effects. You can follow the instructions on this page and the referenced original post from (he includes a link on the page). Good luck! He's got some great tips on some of his other pages.
http://photo.rwboyer.com/2010/03/15/aperture-3-book-theme-trick/
A warning about editing the Master pages--it only edits them in that book--it doesn't update the theme. So if you go to create another book with those same layouts, you'll have to duplicate the book and replace all the images. An alternative would be to create a "clean" book with no photos in it and then just use that as a starting point each time.

Flash CS4 Professional Help is live on the web

I just wanted to let everyone know that the Flash CS4 Help is
now live on the Adobe web site. Search is enabled, but is still
being refined. The help topics are still being indexed, so you may
not see them in search results for several more days.
In the meantime, you can browse all the Help titles that have
been updated for CS4, including the following:
Using Flash:
http://help.adobe.com/en_US/Flash/10.0_UsingFlash/
Programming ActionScript 3.0:
http://help.adobe.com/en_US/ActionScript/3.0_ProgrammingAS3/
Using Adobe ActionScript 3.0 Components:
http://help.adobe.com/en_US/ActionScript/3.0_UsingComponentsAS3/
ActionScript 3.0 Language and Components Reference:
http://help.adobe.com/en_US/AS3LCR/Flash_10.0/index.html
Learning ActionScript 2.0 in Adobe Flash CS4 Professional:
http://help.adobe.com/en_US/AS2LCR/Flash_10.0/Part1_Learning_AS2_1.html
ActionScript 2.0 Language Reference:
http://help.adobe.com/en_US/AS2LCR/Flash_10.0/Part2_AS2_LangRef_1.html
Using ActionScript 2.0 Components:
http://help.adobe.com/en_US/AS2LCR/Flash_10.0/Part3_Using_V2_Components_1.html
ActionScript 2.0 Components Language Reference:
http://help.adobe.com/en_US/AS2LCR/Flash_10.0/Part4_AS2_Components_LangRef_1.html
Adobe AIR 1.1 Quick Starts for Adobe Flash CS4 Professional:
http://www.adobe.com/devnet/air/flash/quickstart/
Developing Adobe AIR 1.1 Applications with Adobe Flash CS4
Professional:
http://help.adobe.com/en_US/AIR/1.1/devappsflash/
Developing Adobe Flash Lite 2.x and 3.x Applications:
http://help.adobe.com/en_US/FlashLite/2.0_FlashLiteDevGuide2/index.html
Adobe Flash Lite 2.x and 3.x ActionScript Language Reference:
http://help.adobe.com/en_US/FlashLite/2.0_FlashLiteAPIReference2/index.html
Developing Adobe Flash Lite 1.x Applications:
http://help.adobe.com/en_US/FlashLite/1.0_FlashLiteDevGuide1/index.html
Adobe Flash Lite 1.x ActionScript Language Reference:
http://help.adobe.com/en_US/FlashLite/1.0_FlashLiteAPIReference1/index.html
Extending Adobe Flash CS4 Professional:
http://help.adobe.com/en_US/Flash/10.0_ExtendingFlash/index.html
Enjoy!
-Jay

Super Thanks!!!

Is there a way to change the master text length in FCP? The default length is 10 seconds, which is too long. I can easily adjust the length but I don't want to do it each time, and I don't want to adjust one and then have to copy and paste this length.

Is there a way to change the master text length in FCP? The default length is 10 seconds, which is too long. I can easily adjust the length but I don't want to do it each time, and I don't want to adjust a text clip and then have to copy and paste this each time. Ideally, there should be something in User Preferences but there is not. Thanks.

Maybe some one else can pipe up with a solution, but this would literally take 2 seconds to do for a new project. And you can create a "template project" that includes this "text" clip. Save this project and then to a get info and check "stationary pad." When you double click on this file, fcp will open with a copy of this project and you just need to do a save as.
I've been working with computer editing systems for longer than i can remember and at a certain point you just have to adapt your workflow to the limitations of the software.

Is it possible to view the content of multiple lists(located in multiple webs) in one ListViewWebpart? And how can I filter a multivalue column?

Is it possible to view the content of multiple lists, that are located in different webs as well, in just one ListViewWebpart? Could I maybe change the query programmatically so that it get's the content this way?
I know that I could use the Content Query Webpart instead - actually I have been using that so far, but the problem is, that it brings no standard Sharepoint functionality for lists with it... I had to write the xsl style sheet, there are no dynamic filters
that the user could set, there are no default list operations the user could use.
The ListViewWepart has all of these, but it only shows the content of one list...
And my second problem:
One column can contain multiple values (like a column that contains multiple users or user groups that are related to one entry). I can filter every other column with the standard filters, but not the column with multiple values in it. Is it possible to
activate that or maybe add this feature programmatically?

You can fetch data from multiple lists in ListViewWebpart, this can be possible through Content Query web part or Custom Web Part using visual studio but in that case you can not get the standard SharePoint funcationality for list (which is available in
ListViewWebparts).
No OOB filter available for multi-choice column, you also have to go with custom solution to achieve this.
Adnan Amin MCT, SharePoint Architect | If you find this post useful kindly please mark it as an answer.

No longer able to adjust the length of a video clip in imovie 6 HD

Without warning (or reason) I can no longer adjust the length of a video clip (new or old) in imovie. I've tried the old way of highlighting the clip and putting the cursor at the start or end, but the cursor doesn't change. I've also tried double clicking on the clip but then the length is fixed.
This problems happens in new and old movies and remained after I deleted and reinstalled imovie.

I searched further using the correct word (trim) and found that I had to turn off the audio levels

How can I adjust the length of a note? Please help.

How can I adjust the length (the sustain time) of a note after I have selected the note? Many thanks.

Just drag the right end back and forth (mouse over the end of the note - a ] appears) - by holding down ctrlshiftdragging you can change the subdivision into ticks. In the Midi event editor you can do it numerically - just change the numbers displayed in the length section.

Can i adjust the length each slide plays in keynote

can i adjust the length each slide plays in keynote.
im trying to make a keraoke style slideshow with lyrics, and music. can i adjust the length of each slide.

Click on the slide background then change the value in the drop down menu: Inspector > Animate > Transitions > Start Transition > Delay
The inspector is the panel on the right hand side.

Can you adjust the length of time the screen stays lit?

Can you adjust the length of time the screen stays lit?

but you can't lengthen it unfortunately.
Bear in mind, the screen is the largest consumer of power.

? Flash CS4, Is it possible to adjust the length of multiple timelines at once?

Similar Messages

Maybe you are looking for