Flash CS4 Windows domain not supported
Do you know if it is true that Flash CS4 is not supported by Adobe on a Windows domain environment?
I don't understand why having a computer on a windows domain can cause Flash crashes constantly.
I'm trying to find documentation regarding my question, but haven't been able to find anything.
Hi kglad,
I am a bit new to this and can not find any info on allowscriptaccess.
Also most exe files that I have found are 2-3MB and I was just wondering if 4MB is normal as I can not find much info on this.
Also if 4MB is normal, why the increase in size?
Thanks,
Sen
Similar Messages
-
"You can't open the application "Flash" because it is not support on the architecture"
Looking for some help with this.
I recently had a system corruption on the MAC machine here in my office.
The user was suppose to save his work to the servers which they didn't.
The users that was using the Mac ended up losing all there data as the hard drive failed.
As a precaution I decided when I was rebuilding the MAC to replace the dead 250MB hard drive with 2x1TB hard drives.
I would then create a RAID1 (Mirror) with the two hard drive so if a single drive fails the users can continue to work without interruptions or losing any work.
Mac installation went without an issues. Then the Adobe installation appears to go okay, however as I was double-checking the installs for the Flash and Indesign programs were grayed out wiht that no smoking sign symbol on them. When attempting to run the programs all I recieved was the following Error:
"You can't open the application "Adobe InDesign CS4" because it is not support on the architecture"
or
"You can't open the application "Flash" because it is not support on the architecture"
All other programs for the CS4 open and run without any issues. The CDs I have are for a multi-user license.
System spec are:
Model Name: Mac Pro
Model Identifier: MacPro3,1
Processor Name: Quad-Core Intel Xeon
Processor Speed: 2.8 GHz
Number Of Processors: 2
Total Number Of Cores: 8
L2 Cache (per processor): 12 MB
Memory: 8 GB
Bus Speed: 1.6 GHz
Boot ROM Version: MP31.006C.B05
SMC Version: 1.25f4
Does anyone have a solution?The usual reason for that error is that the application isn't installed. As for why they didn't install, that I can't tell you.
Bob -
Hi All,
When publishing a Flash CS4 Windows Projector the file size is 4MB is there a way to reduce this size say down to about 1.5MB.
Also the fscommands do not appear to work. Does anyone know how to fix this.
Thanks,
SenHi kglad,
I am a bit new to this and can not find any info on allowscriptaccess.
Also most exe files that I have found are 2-3MB and I was just wondering if 4MB is normal as I can not find much info on this.
Also if 4MB is normal, why the increase in size?
Thanks,
Sen -
My current Camera Raw 5.7 for Photoshop CS4 Extended does not support Canon EOS 6D. What can I do? Will there be a Photoshop Camera RAW for that?
You would need Camera Raw 7.3 or later to open those files. Adobe is not going to update CS4. You can either get a newer version of Photoshop that comes with a current version of Camera Raw, or you can use the DNG converter to save your files down to the ACR version that works with CS4.
-
I keep getting this message when trying to watch TV or films
This content requires Adobe Flash Player, which is not supported by your device
Is there an app that will play this. I can't find one....Flash is not supported on the iPad - and as Adobe have announced that they are stopping development on all mobile versions of it, it probably never will be.
Browser apps such as Skyfire, iSwifter, Puffin and Photon 'work' on some sites, but judging by their reviews not all sites. Also some websites, especially news and media sites, have their own apps in the App Store.
If you do a search on this forum you will find hundreds of other threads on the subject. -
PSE 13 is supposed to support OS Windows Vista. Now, after purchasing and downloading, states "OS requirement not met...Windows Vista not supported." Can anyone help? Will need simple steps explaining what to do! Thanks!
No, Vista is not supported:
http://helpx.adobe.com/x-productkb/policy-pricing/system-requirements-photoshop-elements.h tml -
Purchased Photoshop Elements 13 (upgraded from Photoshop Elements 10), downloaded, entered serial numbers, then got the error message: "OS Requirement not met, Windows Vista not supported" now what?
Sweetie Bug wrote:
now what?
System requirements | Adobe Photoshop Elements
The last version of PSE which supported Vista was version 12.
You'll either have to upgrade your operating system to Windows 7 or Windows 8 or return PSE 13 for a refund. -
Version of Windows OS not supported
Downloaded Adobe Reader 70. When opening desktop message comes up this version of Windows OS not supported. What do I do?
Ok, if you do not have service pack 2 of Windows 2000, you cannot
install Reader 7. Go to
http://www.adobe.com/products/acrobat/readstep2_allversions.html and
choose Windows 2000 SP1.
HOWEVER, if you do not have service pack 4, you should not be
connecting to the internet! You are vulnerable to many viruses. You
should use Windows Update to bring yourself up to date with patches
for Windows 2000. This will take quite some time, but I recommend you
don't delay...
Aandi Inston -
"earlier versions of windows are not supported boot camp" with bootcamp 5.1.2
Hi everyone !
I have a problem about installing window 8.0 pro 64-bit with bootcamp ( v5.1.2 ). When I finished setting up, Bootcamp shows me a message as " earlier versions of windows are not supported boot camp " although I'm using bootcamp with 5.1.2 version. How can I resolve it ? My mac is mgxa2 mid 2014.
Thanks a lot !Thanks for supporting to me .
According to "Boot Camp: System requirements for Microsoft Windows operating systems - Apple Supports" If I use bootcamp version equal or greater than 5, so I can do it. But my current bootcamp likes that. So why not ? . In the first time I set up though bootcamp , it's good but now it always shows that message . -
my macbook air keeps on saying that windows does not support OS X
what do i do?Windows on Intel Macs
There are presently several alternatives for running Windows on Intel Macs.
1. Install the Apple Boot Camp software. Purchase Windows
XP w/Service Pak2, Vista, or Windows 7. For Boot Camp
4.0 and above you can only use Windows 7 or later. Follow
instructions in the Boot Camp documentation on
installation of Boot Camp, creating Driver CD, and
installing Windows. Boot Camp enables you to boot the
computer into OS X or Windows.
2. Parallels Desktop for Mac and Windows XP, Vista Business,
Vista Ultimate, or Windows 7. Parallels is software
virtualization that enables running Windows concurrently
with OS X.
3. VM Fusion and Windows XP, Vista Business, Vista Ultimate,
or Windows 7. VM Fusion is software virtualization that
enables running Windows concurrently with OS X.
4. CrossOver which enables running many Windows
applications without having to install Windows. The
Windows applications can run concurrently with OS X.
5. VirtualBox is an Open Source freeware virtual machine such
as VM Fusion and Parallels that was developed by Solaris.
It is not as fully developed for the Mac as Parallels and VM
Fusion.
Note that VirtualBox, Parallels, and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc. There are performance differences between dual-boot systems and virtualization. The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech Labs- Virtualization Benchmarks, January 2013 | MacTech for comparisons of Boot Camp, Parallels, and VM Fusion. Benchmarks of all of the above except Crossover can be found in Benchmarking Parallels, Fusion, and VirtualBox Against Boot Camp - The Mac Observer. Boot Camp is only available with Leopard or later. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive. -
Flash CS4 onPeerConnect does not fire
Hi
I tryed to do Flex example for simple chat (p2p) with Stratus at Flash CS4 IDE
(adapted it of course) but onPeerConnect does not fire.
Can you take a look at my code ?
What's wrong with it ?
package {
import flash.events.*;
import flash.net.*;
import flash.display.*;
import flash.media.*;
public class stratusTest2 extends Sprite {
private const SERVER_ADDRESS:String="rtmfp://stratus.adobe.com/";
private const DEVELOPER_KEY:String="a9fb14e5b040800e8327ab51-37f33907d0c1/";
private var nc:NetConnection;
private var myPeerID:String;
private var farPeerID:String;
// streams
private var sendStream:NetStream;
private var recvStream:NetStream;
private var VideoDisplay:MyVideoDisplay;
private var FAR_PeerVideoDisplay:farPeerVideoDisplay;
private var VidDisplay:Sprite;
public function stratusTest2(){
addEventListener("addedToStage",initThis);
private function initThis(e:Event){
VidDisplay=new Sprite();
addChild(VidDisplay);
connectToStratusBTN.addEventListener("mouseDown",initConnection);
initSendStreamBTN.addEventListener("mouseDown",initSendStream);
initReceiveStreamBTN.addEventListener("mouseDown",initRecvStream);
sendDataBTN.addEventListener("mouseDown",sendDataBTNPressed);
private function initConnection(e:MouseEvent){
if (MY_peerIDText.text) {
farPeerID=MY_peerIDText.text;
nc=new NetConnection();
nc.addEventListener(NetStatusEvent.NET_STATUS,ncStatus);
nc.connect(SERVER_ADDRESS+DEVELOPER_KEY);
private function ncStatus(event:NetStatusEvent):void {
INF.appendText("ncStatus: "+event.info.code+"\n");
trace(event.info.code);
myPeerID=nc.nearID;
MY_peerIDText.text=myPeerID;
private function initSendStream(e:MouseEvent){
trace("initSendStream");
INF.appendText("initSendStream\n");
sendStream=new NetStream(nc,NetStream.DIRECT_CONNECTIONS);
sendStream.addEventListener(NetStatusEvent.NET_STATUS,netStatusHandler);
sendStream.publish("__media");
var sendStreamClient:Object=new Object();
sendStream.client=sendStreamClient;
sendStreamClient.onPeerConnect=function(callerns:NetStream):Boolean{
farPeerID = callerns.farID;
trace("onPeerConnect "+farPeerID);
INF.appendText("onPeerConnect "+farPeerID+"\n");
return true;
//VideoDisplay=new MyVideoDisplay(VidDisplay);
//var camera:Camera=Camera.getCamera();
//VideoDisplay.attachCamera(camera);
//sendStream.attachCamera(camera);
private function initRecvStream(e:MouseEvent){
recvStream=new NetStream(nc,farPeerID);
INF.appendText("start receiving from "+farPeerID+"\n");
recvStream.addEventListener(NetStatusEvent.NET_STATUS,netStatusHandler);
recvStream.play("__media");
recvStream.client=this;
//FAR_PeerVideoDisplay=new farPeerVideoDisplay(VidDisplay);
//FAR_PeerVideoDisplay.attachStream(recvStream);
public function receiveSomeData(str:String){
txtReceiveData.text=str;
private function sendDataBTNPressed(e:MouseEvent){
sendStream.send("receiveSomeData",txtSendData.text);
private function netStatusHandler(event:NetStatusEvent):void {
trace("netStatusHandler: "+event.info.code);
INF.appendText("netStatusHandler: "+event.info.code+"\n");
trace(event.info.code);
i have 3 input texts: MY_peerIDText, txtSendData, txtReceiveData
When i press connectToStratusBTN i get ID after than i open another
browser window with the same swf and paste this ID into MY_peerIDText
After connection i press initSendStreamBTN in first swf (it is 1st browser page)
and i press initReceiveStreamBTN in 2nd swf
After that iwrite down some text in txtSendData TextField (in 1st browser page) and press sendDataBTN
Nothing happensthis function doesn't work correctly:
private function sendDataBTNPressed(e:MouseEvent){
sendStream.send("receiveSomeData",txtSendData.text);
because you send not String, but link to the txtSendData.text, which is empty in another peer.
So, solution is following (not the one, but for example):
private function sendDataBTNPressed(e:MouseEvent){
var sendString:String = "";
sendString+=txtSendData.text;
sendStream.send("receiveSomeData",sendString); -
ITunes downloaded, but does not open-Windows does not support Mac script
I have recently bought a Toshiba laptop with pre-installed Windows Vista. I have managed to download iTunes, but I cannot open it. The computer posts a message saying that it does not support Mac script. I suppose that I need additional software (daemon tools?)? I would be grateful if someone could advise me in relation to this issue.
Toshiba Satellite Windows VistaNo, you should need nothing additional. I suspect you may have tried to download the Mac compatible version of iTunes & that's why your getting this message. Make sure you have checked the Windows version & nothe Mac version on the download page.
-
CS4: window does not regain focus
This happens using Dreamweaver CS4 on Windows 7 RC.
(Untested on Windows XP, Vista.)
Does not appear to be an issue with Photoshop CS4.
If DW is in focus and you click on another program's taskbar icon twice it does not re-focus the DW window, which was previously in focus.
For example:
I have Dreamweaver open and in-focus (I can type)
then I click the Firefox icon in the taskbar (Superbar) to preview what I just uploaded (F5)
then I click the Firefox icon again (my cursor is still there) to minimize it and return to Dreamweaver
then I start typing.... but the Dreamweaver window is not in focus, even though it is visible and in front
This works in XP with Photoshop CS2.
This is not a Windows 7 problem because other programs don't have this problem.
This is just a minor annoyance, but can anyone else relate to this or is it just me?
Thanks!I see this as a condition common to many applications by many companies...
First you get the program's attention. (by clicking on it somewhere)
Then you start typing in it.
Think of the mess we would be in if you could simply hover your cursor and start typing without clicking...you could wreak havoc without even knowing where your typing is going...wait, that might be a good idea... (not the havoc...)
Beth -
Unable to set up wireless printer HP OJ 4680 error OS Windows XP not supported
Trying ro set up my printer for wireles and it is stating my Windows XP OS is not support.
Just noticed the Starter CD is for Windows 7.
Anyone know what I can do to fix?I searched Google for you and found the drivers you need are on the HP web site. Install the full featured software and drivers.
http://h10025.www1.hp.com/ewfrf/wc/product?cc=us&lc=en&dlc=en&product=3692888
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired! -
ICal info window does not support html?
Greetings,
I have exported several files from WebCalendar (http://webcalendar.sourceforge.net/) to ICal and found that the "info" window views the html as code and not as actual content. I looked about for an option to possibly enable this, but I can't seem to find it. I'm suspecting ICal does not support this function.
Any info you can provide is greatly appreciated.
- Jeff Tovar
G5 Mac OS X (10.4)
G5 Mac OS X (10.4)OK, got that thank you.
If I understand the iCal specification correctly, this is not a compatible ics file. The contents of the DESCRIPTION should be text, not requiring interpretation. Your sample includes html tags - a browser will interpret them rather than display them, but ics files should just have plain text. So iCal is correct in showing you what it gets, rather than attempting to interpret the html markup tags.
You need to find a way for your webcalendar to export the file without markup. Note that you can't put a link (as you are attempting) in the Notes (DESCRIPTION) field - it will just be displayed as text. Even if you put something in the URL field, you can't directly click it, you have to click on the URL label and select go to location.
So, in short, the answer to your original question is that iCal info window does not, and is not supposed to, support HTML.
AK
Maybe you are looking for
-
How to get Cube and Dimension ID from SSAS Database programatically
Hi All, I am processing one SSAS cube from SSIS package and processing the cubes dynamically .For this am putting the Cube ID ,Cube name, Dimension ID, Dimension Name in a table and generating the XML programmatically. I can right click the properti
-
Hi All, As I have tried a few times, the windows file path separator (\) character is not directly compatible with the way java works. So if I have to create File file = new File("C:\temp"); the file won't work, I need to append the escape sequence \
-
Adobe Air installation status issue via silent installation
I installed adobe air silently, then installed an adobe air applicaiton silently. Everything works, and I can launch the application. However, if I use the status check via air.swf file it has the "available but not installed" and it can't retrieve
-
How do I open an xpt file with firefox?
windows says the file type is not recognized and can't find a program on the web. Will firefox open an xpt file? Can I download an app for this? Thanks.
-
WLST offline while trying to create domain in Weblogic 81
Guys, Was able to invoke weblogic.WLST via ant to setup and custom WLS90 domain . I tried to do the same for WL81 with no luck. Looks like I am unable to import getopt module. [java] ImportError: no module named getopt [java] Java Result: -1 Pretty m