Flash CS5.5 Library Assets "Preview not available"

Library assets essentially vanishing into thin air.  You either get blank white or "Preview not available" when you click on them.  And then when you click to Edit them, you get a memory error. 
Still no fix for this guys?  2 years and a version upgrade later...unbelievable.  Adobe is a lost cause...

The number of frames in each scene doesn't look like a problem.
I would suggest you to Keep one scene and split your elements in Movie Clips instead of creating different scenes.
Your explanation suggests that your scenes run continuously and there is no interaction by the user. So you can easily use 6 movie Clips in the timeline instead of Six Scenes.
Let me know if this solution resolves your issue.

Similar Messages

  • Add Folder to Library option is not available in the latest version of iTunes for Windows. I am using Windows 7 64 bit. Any suggestion ?

    Add Folder to Library option is not available in the latest version of iTunes for Windows. I am using Windows 7 64 bit. Any suggestion ?

    CTRL + B will bring up the menu bar, on which is File/Add Folder...

  • Preview not available for this file on import

    I just transferred all my stuff from a vista computer to a new Windows 7. Lightroom 3.3 is now running as a 64 bit. I am importing tiff scans which were done on the Vista computer. At first everything was going fine, but now when I select files for import, all I can see are greyed out boxes which say "preview not available for this file". If I import the file, all is well, but I would like to see them in preview as well. Also, the program has crashed twice in the middle of an import.
    Thanks for any help!

    Yes, the larger preview is viewable. I'm using Vuescan to scan the files. Nothing has changed with the scanning from the previous scans which worked fine...same settings, same computer (not the new one).

  • Preview not Available for NEF files

    It is my first time using LR and also my first time trying to download NEF files from my new D750. I removed the card from the camera and inserted it into my computer (MacBook Pro) I can see previews of the images shot in JPEG format, but those shot in RAW format are appearing as boxes with "Preview not available".  The D750 came with Nikon ViewNX2 software, which I downloaded, and I can see the previews on that. Any suggestions/ideas on what might be the problem?

    Lightroom does not support the Nikon D750 RAW photos at this time.
    Please read this thread:
    Support for Nikon D750
    Just released (see the message 49 of that thread) is a DNG converter that should allow you to convert the NEF to DNG and import those into Lightroom.

  • Flash CS5 UIcomponent code hint not come in built in actionscript editor

    Flash CS5 UIcomponent code hint not come in built in actionscript editor

    If you are reporting a bug, this is not the place to do so.  Try here instead...
    Adobe - Wishlist & Bug Report
    http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

  • "Preview not available for this file" error message.

    I'm using LR 4.4 but it hasn't worked correctly since I got my new camera (Canon 70D). When trying to import I keep getting the "Preview not available for this file" error message. I had some better luck connecting the camera with a usb cable, that let me see the jpg images, but it would not let me see the raw (.cr2) images. Would I solve this problem by upgrading to LR5?
    I'm running LR 4.4 on a Windows 7 PC.
    Thanks for any help that can be provided.
    Robert

    Support for the Canon 70D was introduced with LR version 5.2. see the link below.
    Camera Raw plug-in | Supported cameras

  • CS5 library HTML instances not getting updated (and font options are limited)

    Having the following problems using FW CS5/Mac:
    1. Heading1 instances (created from Common Library -> HTML) are not reflecting updates to library item in Document Library.
    To replicate: Drag a Heading1 element from the common library to document.  Create a few more instances of it in the document, using the one in your Document Library.  Now edit the library version. The instances on the page stay the same, they don't reflect updates.
    2. Symbol Properties for HTML elements has very limited options for Font.   'Heading1' has only Arial or Arial Black.  'Link' has those, plus Comic Sans (and Arial is listed twice).  There is nowhere else to customize symbols.
    3. Also, my Layers panel randomly disappears, even though Window->Layers is still checked. I have to restart to get it back.  Cursor also sometimes disappears and requires restart. Seems to happen whenever I add a Link (from Common Library).
    Are there workarounds for these?  If they are documented bugs, is there a patch?
    Thanks for any help.
    Jeff

    You can try editing the JSF file for the symbol - that's what controls the symbol properties. I'm not a coder, but I found that putting your preferred font at the beginning of the font list in the JSF list will solve the problem.
    For example, I first saved a copy of the original script, then moved the Times Roman family to the beginning of the list and saved this version as the original script name. These scripts are found in the Fireworks application folder, inside Configuration > Common Library > HTML.
    I restarted FW and when I dragged the H1 instance onto the canvas, it displayed Times immeditately.
    Unfortunately, it deleted that family from the combo list, simply renaming it Arial - Helvetica - san-serif and placing it at the top of the list. So now I have 3 Arials - lol. The first one indicates the current font chosen (or it's supposed to) and the other two list my true Arial font family and the Times font family (renamed as Arial)  Haven't figure out how to fix that yet.
    This change doesn't affect the preview image either, but there must be a way to alter it by editing the true symbol.
    HTH a little, at least.

  • In manage add-ons, Adobe Flash Player is listed under Not Available, but is listed as enabled.

    When trying to view something that needs flash player, it tells me that I need to have flash player to do this.  So I go to install it, and it tells me it is already installed with my Windows 8.  So, then it tells me to either Enable flash player or to disable Active x filtering.  Active x filtering is not enabled, so I go to Manage add ons, and it shows that Shockwave Flash Object is listed under the heading NOT AVAILABLE, but is listed as being enabled.  I have tried to reinstall flash player, but it won't let me because it is already installed.  Not sure why it is showing up under Not Available, and not under the Adobe heading with my Adobe PDF reader.  Can anyone tell me how to get flash player back from this point???

    Please ask your question on a forum for the Flash Player

  • LiveCycle Version 8-PDF Preview not available

    I am designing forms in LiveCycle version 8.0. The PDF Preview is not available. The help file says it's because I don't have Acrobat installed. I have Acrobat Professional version 8 installed. How do I get the PDF preview?

    This just started happening for me today. Yesterday Designer 8 was fine. PDF preview was available. Today, suddenly, it's grayed out in the menu and the PDF Preview tab is missing from the main window... POOF! Gone!
    I have already done a repair of Acrobat 8... how do I get the PDF PReview back? This is absurd!

  • Flash CS5 Help runs Lotus Notes???

    Hi, I just got Flash CS5 installed on my desktop and when I click Help on the menubar it kicks off my default mail program, Lotus Notes! I don't see anything in preferences to control this. Do I need a reinstall?
    Thanks!

    There are numerous getting started tutorials online (if you need them), but you could also check out this animation learning guide that will help you when it comes to the tweens (rotating, moving): http://www.adobe.com/devnet/flash/learning_guide/animation.html
    You might also want to look into using IK: http://www.adobe.com/devnet/flash/articles/spring_tool.html has a lot of good examples.

  • Dynamic Converter problem - Preview not available

    Hi All,
    I have a problem with Dynamic Converter.
    After choosing to edit a particular template and then trying to preview a certain content item, a message is passed saying "Preview is not available". The strange thing is that we are running two different environments where the function is working fine on the other one.
    Any suggestions regarding this?
    Note: We are running 10gR3 with Dynamic Converter 8.1.0.754
    thanks in advance!

    The obvious question is: are you sure you're previewing a content item that's "convertible" and also exists?
    The template editor only remembers the last content ID you picked. So if you pick item A for environment X and then B for environment Z, the editor will always load up B the next time you open up the editor. So if you edit the template in X again, and B doesn't exist in X, you'll get that error.
    Don't know if your problem is as simple as that though. We're running DC 8.1.0.735 and don't get any preview errors outside of the scenarios I listed above.
    Good luck.

  • Preview not available

    Hello:
    I'm running Lightroom 3.6 on Windows XP.  My laptop crashed and I had to re-install Lightroom.  When I try to import my photos, I'm receiving "Preview is not available for this file".
    Can someone help me out?  Lightroom was working perfectly before the crash and I don't quite understand what happened during the install process.
    Thanks in advance.

    Just finished a similar exercise.  Finally figured out I needed to upgrade LR from 3.0 to 3.3 then to 3.6.  You might check to see if you are running in 3.0.

  • CS5 print as PDF not available

    Greetings
    I'm not an experienced or professional Illustrator user but have created several PDFs up until a couple of weeks ago with no problem.
    Today I am trying to export or print to PDF and the PDF option has disappeared from both export and save dialogue boxes. The only option for printing is Adobe PostScript file (I have no printer connected). The option is not available in any of my AI files. I last printed 3 weeks ago and didn't have any problem. I don't believe I have made any fundamental changes to the Illustrator setup.
    I'm using CS5 15.0.0 on a MacBook Pro running Lion OS 10.7.2.
    I am sure it's an easy fix.
    Any ideas much appreciated
    EskimoPieX

    Thanks Wade
    I am not sure why this has happened now though I do now understand that this is a Mac 'issue'.
    I've successflly created a PS file but none of the print options were available so I ended up with two A4 sized pages when I wanted two business cards with 5mm bleed.
    Where can I change these settings?
    Thanks
    EskimopieX

  • Why latest flash player 11 version is not available for download?

    Flash player about page (http://www.adobe.com/software/flash/about/) is showing the latest flash player as 11.3.300.255 for windows where as flash player download page is showing 11.2.202.235 fow download.
    I have tried the following pages for download but they too have older version 11.2.202.235 for download:
    http://www.adobe.com/special/products/flashplayer/fp_distribution3.html
    Please help thanks.

    Pat and Clinton:
    Recognize ... if I go to http://www.adobe.com/software/flash/about/ the Flash version etc will not display (with 11.3.300.257 plug-in (sub-version) variety only)
    Recognize ... if I call a MLB.TV baseball game (say in Firefox w/11.3.300.257):
    [ please see this discussion: http://forums.adobe.com/message/4456584#4456584 ]
    on the internet I get a permanent blank screen ... nothing ... nada ...
    Right now I don't even have a C:\Windows\system32\Macromed\Flash folder or a C:\Windows\syswow64\Macromed\Flash folder!
    BUT, I kid ... this is a trick response ... (W2KP users chuckling here). You are understandably overlooking that, at least on this Adobe Community Forum, I am a Windows 2000 Professional (W2KP) Operating System (OS) user
    Consider that MY equivalent-to-the-whats-in-the-folder-query-you-pose is C:\WINNT\system32\Macromed\Flash and,
    the C:\WINNT\system32\Macromed\Flash folder currently contains:
    06/10/2012  03:49a           9,282,248 Flash32_11_3_300_257.ocx
    06/10/2012  11:00a              54,256 FlashInstall.log
    06/10/2012  04:22a                 856 flashplayer.xpt
    06/10/2012  04:22a             351,904 FlashUtil32_11_2_202_235_Plugin.exe
    06/10/2012  03:49a             465,096 FlashUtil32_11_3_300_257_ActiveX.dll
    06/10/2012  03:49a             686,280 FlashUtil32_11_3_300_257_ActiveX.exe
    06/10/2012  04:22a           8,797,856 NPSWF32_11_2_202_235.dll
    As a W2KP dying breed, I am building to the drop-dead (D-D) versions of available software for W2KP. For instance, my D-D version of Firefox is 12.0, my D-D version of Internet Explorer is IE SP1 (6.0.2800.1160CO) etc.
    (Note: Drop-dead sofware is software that will not be updated/upgraded ever-again-ever for W2KP) 
    I do think that this is an install issue and could use your help. Perhaps, a W2KP only and 11.3.300.257 issue?
    I will be studying it further with the notion:
    The hack referrred to in:
    http://forums.adobe.com/message/4465086#4465086
    maybe? doesn't work for Adobe Flash player 11.3.300.257 Plug-in variey (for FF and other user agents (browsers)?
    Again, the ActiveX variety of Adobe Flash Player 11.3.300.257 INSTALLED fine using the hack and seems to RUN fine with IE SP1 on W2KP. So... it's a bit weird.
    Will someone verify that the hack is doable for the plug-in var. If not, the W2KP D-D version of Adobe Flash Plug-in variety software is apparently gonna be Adobe Flash Player 11.2.202.235.
    TIA
    Dennis

  • SharePoint 2013 Picture Library Thumbnail Preview not Working

    We are using SharePoint 2013 Enterprise edition.  We are using an enterprise wiki site collection template.  In the Site Collection Images library (Picture library), the thumbnail preview is NOT working.  For some users, they can see all of
    the thumbnail previews, for other users they cannot see any.  Some users can see a few thumbnail preview images and the users that could not see any thumbnail preview images, after refreshing a few times could see SOME of the thumbnail preview images. 
    In addition it is likely not a security issue as all users have contribute rights to the library and I have SCA rights.  It is also not a browser issue as one user on my team has IE 9 with nearly (maybe identical) identical settings as I do, who am also
    using IE 9.  We are having the problems in IE 8, 9 and 10.  Also, how could it be a browser issue if using IE 9 for example, users can see some of the thumbnail preview images but not others.  Lastly, it is not a file extension issue as the
    problem happens with jpg's as well as png's. 
    Any help would be GREATLY APPRECIATED!   FWIW - I'm chalking this up as a bug as it is SO odd and inconsistent, I cannot understand it any other way.
    Regards,
    Bill

    Have you tried looking at the traffic with Fiddler?  That can give you an idea if there are any auth or 404 issues.
    Chris Givens CEO, Architecting Connected Systems
    Blog Twitter

Maybe you are looking for

  • How do I export an elements organiser album to iPhoto or hard drive?

    I have created albums on my elements organizer using the brilliant 'search for duplicates' feature thereby sorting out all unwanted repeated photos.  I now would like to export these newly organized albums to either iphoto or hard drive from the elem

  • Target Disk Mode = MAX FANS!

    I know I'm not the only one with this issues as almost every Mac I've ever used has done this. Why is it that when you run your Mac in target disk mode, the fans slowly rev up until they hit max speed, and then it just stays that way. EVEN IF THE COM

  • AC Wall Charger not working

    Hi, This seemed to be the most appropriate place to post this... My AC wall charger has just stopped working all of a sudden. The ipod doesn't respond at all when connected to it (it was working fine for the last 7 months). Firstly, it is a firewire

  • Yet another black screen on TTY with nvidia drivers

    Hi everyone, I've just changed my hardware and immediately installed a fresh Arch on it. Everything was fine until I installed the nvidia drivers: from that moment, once the boot is complete I get a normal (and working) GDM login screen, but I cannot

  • Cant Make Flash Video Stop Playing

    I am using an HTMLLoader to display a web page in a NativeWindow. The web page I am displaying has an embedded flash video that plays in it. That all works fine. The problem I have is that when they close the window, the flash video keeps playing. Th