Flash CS5 location conflict with dreamweaver

upon instaling flash CS5 is not allowing me to save changes i made on dreamweaver. there is this msg saying it will stop my dreamweaver communicating from a remote location and when i click on settings, it does nothing. it stop me from updating my website. did some reasearch, many place suggest to go on to the adobe website storage settings panel. not sure how to use it but it seems like i have to entrust every single page of my website to the list as a trusted site in order for it to work. and i test it on one page and it didnt seems do anything.

My two A's '(Apple and Flash CS5) stopped struggling. It had nothing to do with Indesign... it was just a problem of permissions. Why it happened I do not know. The only constatation I dare to make is... Guys from Adobe... you put the right diagnosis... thank you,thank you very much....
Permissions that's all!!
Sniff11

Similar Messages

Does Flash CS5 (AS3) come with more components than CS4 (AS3)?

Hi all.
Bit of a background to my question- I started learning AS3 around June last year (with no prior Flash experience). I was mainly interested in learning Flash for my own knowledge and personal projects I had in mind. Lately though I've been considering getting employed as a Flash developer, but most companies seem to be asking for AS2 experience, as well as AS3. So I fired up CS4 this morning and took a look at AS2. Probably the most surprising thing I found was that CS4 has a whole bunch more components for AS2 than it does for AS3, making me want to drop AS3 and work with AS2 permanently lol (the built in components make my life so much easier, and offer me more than faster execution does). I'm assuming the reason for this is because AS2 has been around for while, and Adobe has had more time to build more components for it, whereas AS3 is only relatively new.
So to conclude, does CS5 have more AS3 components (perhaps equal to AS2), or do we only have the same components as we had in CS4?
<3 components lol.
Thanks guys.

Flash CS5:
     ActionScript 3 - 3 categories (Flex, User Interface, Video). 33 components in total.
     ActionScript 2 - 3 categories (Media, User Interface, Video). 36 components in total.
Flash CS4:
     ActionScript 3 - 2 categories (User Interface, Video) 31 components in total.
     ActionScript 2 - 4 categories (Data, Media, User Interface, Video) 25+ components in total.
Sorry that I don't know how exactly how many components are in Flash CS4 AS2. Couldn't find enough images (I don't have CS4, I use CS5).
Anyway, I think that Flash CS4 AS2 has the most components, with the most categories. However, whether you should use CS5 or CS4 and AS3 or AS2/AS1 really depends on, not how many components are available, but what you need. Chances are some components you will never touch. Also, sometimes you will need a new feature only in Flash CS5, or be asked by your future employer to write an application in the other scripting language.
So really, it depends what you think. If I were you, I would download a trial of both CS4 and CS5, and play around, see which option you like the most. Oh, and be prepared to be forced to use another option by your employer at some stage.
Hope it helps
dikuno <><

Flash cs5 backward compatibile with flash cs4

Hello there
Can anyone tell if cs5 flash is backward compatible?
Thanks

The correct word from Ned Murphy answer is 'in theory'. As actually there are lots of bugs when working with cs4 files in cs5:
a. compiler works incorrectly and sometimes throws compile errors where cs4 compiles the same file correctly with no errors; and these issues concern not some 'reserved words' or classes that are omited in cs4, but rather as simple and unexpected elements as movie clips names, etc.
b. when saving FLA file with embedded fonts in cs4 format fonts may include all outlines even though you may select just a few sets; so it may result in compiled SWF with quite huge size (imagine embedding all unicode Arial and Times fonts - that would take about 500 kb on fonts only).
c. one time I had a bug with one graphic asset being replaced with another after compilation; that was I spent about two crazy hours finding out what causes this strange bug and couldn't - after restarting Flash the bug was eliminated in the same strange way.
And that may be not the full list as Flash CS5 has some serious problems with Library - it causes lots of crashes.

Flash cs5 Timeline tools with MAC

I have learned from a video tutorial (Flash CS5 in the Family 23: Banner Ad Part 1)
to use the F5 key to set the length of a time line of a particular image.
When using the F5 key on the MAC keyboard, it will only allow for the audio to be worked with.
I've tried Apple+F5, Option+F5, Ctrl+F5 etc.
What am I missing?

click edit/keyboard shortcuts and create your own shortcuts or, even easier, right click over the timeline (or anything else in flash) to see a context menu that will let you do what you want.

Flash 9 Flip4mac conflict with Quicktime Pro

Any one have this fun? I can't install Flip4mac without it conflicting and killing Flash 9/Quicktime movies in my browser (ala youtube). Seems to be since I installed Quicktime Pro. Running on an Intel MacBook Pro 10.4.10. Same problem with Safari of Firefox. Thanks - Eric

Why would Flip-4-Mac conflict with flash/quicktime? Flip-4-Mac doesn't even play flash...
Are you saying you can't view youtube videos?
If so thry this:
Go to your Quicktime Preferanes in the System Preferance panel. Click on the Advance tab. Click on MEMI button...scroll down to the very bottom of the list. Miscellaneous ... uncheck Flash media.
And make sure you have the latest version of Flash too...Close out Quicktime and all browsers. Reopen the browser and try youtube again...

Integrating Flash swf or html with Dreamweaver

I created a swf file to replace my current static background image (page properties) in dreamweaver (the files are the same dimensions). When I try to select it, the swf file is grayed out. So I deleted the background image and inserted the flash swf with a transparent bkgd. When I preview it in my browser (safari) it doesn't work. I like the position of the static file and would like the swf to stay in the same place to compensate for different user monitor sizes. Please Help!!!!
The current/live site is http://www.sistercirclemedina.com you will see the static image (header_11_01.jpg). I added the revised homepage (index.html) to my site you can find that at http://www.481gddr.com/sistercircle/index.html The script files required are in a script folder on the hosting server. I also inserted the swf into a completely new dreamweaver document and it does not work.
If the swf file won't work...why? Should I try to use the js and input that into the dreamweaver code?
Thank you so much for your assistance and time.

Check, if all the paths in your projects are "relative" paths.
If you drag&drop files or link in dreamweaver, DW will most likely use absolute paths.
Then when you upload your files, some of this paths won`t exist.
I also inserted the swf into a completely new dreamweaver document and it does not work.
You cant really "insert" a swf into a dreamweaver document.
DW in this case does nothing else then telling the browser (via the <flash> tag where to find the swf. that has to go into a <div>

Flash Video Encoder conflict with Safari for Windows

I installed Safari for Windows (AMD/Windows XP) without the
options (no Bonjour) and found that it disabled Adobe Flash Video
Encoder (tries to reinstall, can't find msi, can't reinstall from
disk, 1 keeps asking for disk 1). Uninstalled Quicktime, didn't
help. Uninstalled Safari, rebooted, still can't get Flash Encoder
working.

timtro;
Many (myself included)won't be installing safari/win until
the final
release, and I suspect Adobe won't test much until then
either, so it's
probably best to report this to apple as a possible bug with
their
beta. -Tom Unger

Importing Flex project into Flash CS5 for use with iPhone packager? Please Help.

Hi all,
I have been developing an application in Flex builder for the iPhone using the iPhone packager, where I've been using the Flex framework.
Now I'm stuck at trying to use my existing libraries in Flash. It seems I can't add the UI components I used in Flex (class VideoExample) to the default Flash container. I need someone's help who has experience with that.
I have created a .SWC file, but when I'm trying to add the container in Flash using addChild(new VideoExample) it doesn't work. I can't load the .SWF externally using loader.load() at runtime, because the application is for iPhone. Any solutions how could I import the project to Flash?
I was thinking about changing the UI components classes from mx.* to fl.*, but I would have to change many code and I'm not sure if it would even work, and I don't want to loose compatibility with mxml.
Please respond, help would be very much appreciated!
Here's my mxml wrapper, from which I start the main application:
<?xml version="1.0"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute" applicationComplete="EntryPoint.main()">
</mx:Application>
Then I have a class which creates the main container:
package {
import mx.core.*;
public class EntryPoint {
    public static function main():void {
        var client:VideoExample = new VideoExample();
        var mxmlApp:Application = Application(Application.application);
        mxmlApp.addChild(client);
Here is the main class VideoExample:
package {
import mx.controls.*;
import mx.containers.*;
public class VideoExample extends Canvas {
    public function VideoExample() {
        super();
        init();
        private function init():void {
        loadImage();
        loadText();
                loadDisplay();
                startConnection();

This forum is for Flash Media Server Developers so most likely you migth get much traction here. I would recommend you to post your query on Flash Builder forum: http://forums.adobe.com/community/flash_builder/using_flash_builder
Also you can try posting here:
Flash Platform Services For Promotion - http://forums.adobe.com/community/promotion
Flash : http://forums.adobe.com/community/flash/flash_general

CS5 Apparent conflict with DPP 3.8

I have thousands of files processed with CS3 which open fine in DPP, including the 3.8 version which came with my 7D camera in December 2011.
However, I also installed the CS5 upgrade last month and all images processed using that will not open in DPP 3.8 without a great deal of
difficulty, but, there is no problem with the earlier version(DPP3.1). The images hang after the first one or two and the computer(s) hang when trying to
load the rest (computer not responding etc).
As you will gather, the problem is not confined to one computer, thus ruling out a problem with the hardware.
Strangely, all files processed by CS3 and CS5 open without problem in DPP 3.1. but it is only those processed through CS5 that produce the problem
in later versions.
I also updated to DPP 3.11 and have the same problem with that.
It looks like there's a problem with CS5.
Anybody have any suggestions?

Or could it be cannon? Here is link for is DPP 3.8 Flawed?

Flash Player reports conflict with MSN when trying to Install

I am using Windows 7 (64) bit OS. I was trying to view an ESPN video when the screen displayed "You Need to have Adobe Flash Player to view this content" "Click here to continue" This takes you to the Adobe Flash Player Down Load for version 11.6.602.171. Under Windows 7 Control Panel, Program & Features, Adobe Flash Player 11.6.602.171 is listed as installed. I tried to download the current version and the program was downloaded. Then I went through the install routine. When the progress bar got to 50% it stopped and reported that MSN needs to be exited. I closed MSN but the message came back to exit MSN. I have tried this several times but always get to the same place and cannot complete the installation. As a result, I cannot view quite a few internet videos. How do I get Windows 7 and the internet sites I want to watch videos on to recognize I have the latest version of Adobe Flash Player?

Although I had closed MSN and it was no longer shown as a running application, the msn.exe was still running when I went to the Process Tab. When I stopped the msn.exe process, the installation worked flawlessly. I went back to ESPN to view the video that I wanted to see and it also played without any further issues. Thank you very much for this information. I have had this problem for quite awhile but finally got so frustrated that I decided to contact the forum. I had no idea that even if an application was ended, a process could still be running. Thanks again!!

Using Air 2.6 with Flash CS5

hey there all,
here is what i am doing so far to use Air 2.6 with Flash CS5. i counts seem to find any help online with this, hope this helps someone...
Setting Up Flash CS5
1. replace Program FIles\Adobe\Adobe Flash CS5\Common\Configuration\ActionScript 3.0\AIR2.0\airglobal.swc with the airglobal.swc in the AdobeAIRSDK\frameworks\libs\air folder of the AIR 2.6 SDK zip file (AdobeAIRSDK.zip)
This lets you compile with the new SDK and use all the new API for camera roll, microphone, etc.
2. replace Program Files\Adobe\Adobe Flash CS5\AIK2.0 with the AdobeAIRSDK folder in the zip file (AdobeAIRSDK.zip) you downloaded from Adobe.
now you can do a test movie in Flash CS5 and it will use the new ADL for testing in Flash (finally works with landscape!).
Publishing
for publishing, unfortunately you cant use the built-in publish for iOS. i wrote this batch file and use it (also you can write an ant task if you use FDT/Flash Builder). This is for windows 64bit...
"C:\Program Files (x86)\Java\jre6\bin\java" -jar C:\AdobeAIRSDK\lib\adt.jar -package -target ipa-ad-hoc -storetype pkcs12 -keystore [KEYFILE].p12 -storepass [KEY PASSWORD] -provisioning-profile [MOBILE PROVISION FILE].mobileprovision [IPA NAME].ipa [XML FILE NAME].xml [SWF FILE NAME].swf Icon_29.png Icon_48.png Icon_57.png Icon_72.png Icon_512.png Default-Landscape.png Default-Portrait.png Default-PortraitUpsideDown.png Default-PortraitLandscapeLeft.png Default-PortraitLandscapeRight.png
i have a 64bit system so i had to specify the 32 bit JRE and use the ADT jar for packaging. now i just double-click the batch file and it compiles for iOS.
Adjusting the app.xml File
the yourapp-app.xml file needs some tweaks from the CS5 packager to work in 2.6:
1. namespace has to change from
<application xmlns="http://ns.adobe.com/air/application/2.0">
to
<application xmlns="http://ns.adobe.com/air/application/2.6">
2. the version node needs to be renamed versionNumber
from
<version>.5.572<</version>
to
<versionNumber>0.5.572</versionNumber>
notice you need to include the leading zero if you arent using a whole number version
ok, thats what i have so far, hope this helps...

hey there all, for those on Windows,
here is a compile script i put together for iOS using AIR 2.6. Copy and past this into a file named "compile ios.wsf". All you have to do is double-click and it will compile and paclage your app.
the script assumes you have a versionNumber like: 0.4.123 it takes and incrememnts the build number (the last 3 numbers only) by one. i will imrpove this later.
<?xml version="1.0" ?>
<job>
<script language="JScript">
     This file assumes you are using a 3-segment version system.
     It is not very inteligent, it just increments the last set of numbers in the
     versionNumber in the XML file by 1. !!be aware that it is not yet smart enough
     to update the second number!!
     // these properties change depending on your project
     var XML_FILE = "YourApp-app.xml";
     var SWF_FILE = "YourApp.swf";
     var IPA_FILE = "YourApp.ipa";
     var TARGET = "ipa-ad-hoc";
     var KEY_FILE = "dist.p12";
     var KEY_PASSWORD = "PASSWORD";
     var PROVISIONING_PROFILE = "YourApp.mobileprovision";
     var ICONS = "Icon_29.png Icon_48.png Icon_57.png Icon_72.png Icon_512.png";
     var SPLASH_SCREENS = "Default-Landscape.png Default-Portrait.png Default-PortraitUpsideDown.png Default-PortraitLandscapeLeft.png Default-PortraitLandscapeRight.png";
     // the location of your JRE/JDK and Air SDK files
     var JRE_BIN = "C:\\Progra~2\\Java\\jre6\\bin\\java";
     var ADT_JAR = "C:\\AdobeAIRSDK\\lib\\adt.jar";
     // this stuff shouldnt need to change
     var objXML = new ActiveXObject( "Microsoft.XMLDOM" );
     objXML.async = false;
     objXML.load(XML_FILE);
     var root = objXML.documentElement;
     var versionNumberNode = root.selectSingleNode("versionNumber");
     var versionNumberArray = versionNumberNode.text.split(".");
     var buildNumber = parseInt(versionNumberArray[2]) + 1;
     versionNumberNode.text = versionNumberArray[0] + "." + versionNumberArray[1] + "." + buildNumber;
     objXML.save(XML_FILE);
     var cShell = WScript.CreateObject("WScript.Shell");
     var compileCommand = '"' + cShell.CurrentDirectory + '\\compile ios.bat"';
     compileCommand = JRE_BIN + " -jar " + ADT_JAR + " -package -target " + TARGET + " -storetype pkcs12 -keystore " + KEY_FILE + " -storepass " + KEY_PASSWORD + " -provisioning-profile " + PROVISIONING_PROFILE + " " + IPA_FILE + " " + XML_FILE + " " + SWF_FILE + " " + ICONS + " " + SPLASH_SCREENS;
     //WScript.Echo(compileCommand);
     var runVal = cShell.run(compileCommand, 1, true);
</script>
</job>
i will see if there's time to do a shell script of OSX and an ANT script for Eclipse...

Insert Flash with Dreamweaver CS3 Question

So I have been building websites for awhile and have always relied on the built in insert flash object that came with dreamweaver as I have never had issues with it.
However as I finished a site recently the client had a friend look at it and brought up the red flag that the site was not w3 compliant. So I go and look at the little tool they have and the only error that comes up is related to the insertion of flash on the page.
I googled it a bit and found a number of people saying that the insert flash through dreamweaver will no show up as compliant. A couple solutions to fix the problem.
But before I go down that road, I want to ask. ...Does it really matter here? Seems like Dreamweaver insertion would be compliant? I mean come on the link that the w3 give to fix the problem is a link from a fix created in 2002.
I have never heard of anyone saying no the flash does not show up so right off I am not terribly concerned but it would be nice to know..
Also if it is important and suggestions as to a nice fix to the issue would be great.
Thanks for your time,
Chris

Right you are!
I tend to spot check pages and haven't done a W3C check on a flash embed in my websites (apparently). Just did one pursuant to your question. The page is 100% compliant without the Flash video. has 51 errors, 35 warnings with it. Lots of those errors are Adobe-generated Javascript that handles the flash video insert, skins it and so on.
Here is where Adobe may not be compliant with the W3C.

Importing anything (swf, swc, etc) compiled from Flash CS5.5 into FB 4.5 throws Errors

I'm using FB 4.5 with sdk 4.1.0.16076.
I've tried importing an swc file, using the "convert symbol to flex component" command and it throws a VerifyError: Error #1053: Illegal override.
I've tried just compiling an swf and embedding it in a Flex compoent, again i get a VerifyError: Error #1053: Illegal override.
I've tried changing a number of compile settings in Flash CS5.5 but with no luck.
Does anyone have any ideas how to fix this error?

with the swf it is: Illegal override of createTextLine in flashx.textLayout.compose.ComposeState.
the swc is Illegal override of FTETextFieldHostFormat in FTETextField.as$134.FTETextFieldHostFormat.
these errors seem arbitrary, since the first time i loaded an swc i got a different Illegal override error regarding some kind of CSS object that i can't remember.
i have read other threads that indicate this problem may occur when compiling objects using different SDKs in the same project. Does Flash CS5.5 compiled objects need to be imported to the 4.5 sdk maybe? (i'm using sdk 4.1).

Stop(); not working when exporting AIR for iOS from Flash CS5.5

Hey there I've tried to do a simple 5 frame animation in Flash CS5.5 each with a stop(); action but when viewed on the iPad the aniamtion doesnt stop, it cycle through the 5 frames instead of stopping at frame 1.
Any reason why that is happening?

Looks like it was a memory problem with the jvm.ini file.
Pumped it up to 256 and it works now.
Hope this helps anyone else in the future if they come across it.
Thanks.

Flash CS5 Publish Preview not working

I am working on Flash CS5 Professional. I have created a simple fla file but not able to Publish->preview the swf file in Google Chrome.
When I click on Publish Preview it opens a new browser window but nothing happens.What am I doing wrong?

I'm having the same issue. Flash runs fine in Chrome, except for when I choose File->Publish Preview->Default - HTML in Flash CS5. When I try to Publish Preview, Chrome, my default browser, opens a new tab that is blank. Repeatedly pressing Refresh doesn't do anything for me (it still loads a blank page).
I just played with it a bit. I think I've got it figured out.
Flash CS5 loads Chrome with the file address in the address bar, but it doesn't Go. If I copy the address, open a new tab, right-click in the address bar and choose "Paste and go", the Flash file loads. Going back to the original tab (the one opened by Flash when I selected Publish Preview, I pressed Enter in the address bar and the Flash file loaded.

Flash CS5 location conflict with dreamweaver

Similar Messages

Maybe you are looking for