Flash CS5 not launching any more! The Procedure entry point ......error

Hi,
I've been having issues with the Java Runtime Environment error and so I just reinstalled Flash CS5 from my Master Suite Discs.
It will not launch at all now and i get the error:
Any ideas how to resolve this quickly?

Please............I need this resolved???
I have now completely reinstalled the CS5 Mastersuite and Flash CS5 is still showing the above error.

Similar Messages

  • Edge animate will not launch it says The procedure entry point GetGestureInfo

    edge animate will not launch it says The procedure entry point GetGestureInfo could not be located in the dynamic link library USER32.dll.

    Hi, Scott-
    Please take a look at this thread here:
    http://forums.adobe.com/message/5076440#5076440#5076440
    I'm guessing you're using Vista; I'll contact you via private message to get you started again.
    Cheers,
    -Elaine

  • When I click on Mozilla Firefox I get an error box firefox.exe - Entry Point Not Found that reads "The procedure entry point sqlite3_db_status could not be located in the dynamic link library mozsqlite3.dll."

    When I click on Mozilla Firefox I get an error box firefox.exe - Entry Point Not Found that reads "The procedure entry point sqlite3_db_status could not be located in the dynamic link library mozsqlite3.dll."

    Are you really using Windows ME?<br />
    Your More system details list shows an IE8 user agent
    You need to do a clean reinstall and remove the Firefox program folder before installing a newly downloaded copy of the Firefox installer.
    * It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    Your bookmarks and other profile data are stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder] and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.

  • Itunes not getting started getting " The procedure entry point AVCF playerenabledhardwareaccelerationkey could not be located in the dynamic link libraryAVFoundationCF.dll how to fix?

    itunes not getting started getting " The procedure entry point AVCF playerenabledhardwareaccelerationkey could not be located in the dynamic link libraryAVFoundationCF.dll how to fix?

    See Troubleshooting issues with iTunes for Windows updates.
    tt2

  • Updating my Win7 to 12.1, I get 'iTunes was not installed correctly Error 7 (Windows error 127). If I try to launch, I get 'The procedure entry point "CMBlockBufferCopyDataBytes" could not be located in the dynamic link library CoreMedia.dll'. Help!

    Windows version 7. Auto update of iTunes to version 12.1 from 12.0.1.
    At end of install process, message 'iTunes was not installed correctly. Error 7 (Windows error 127).
    Tried to launch iTunes, anyway, but immediately got message 'The procedure entry point "CMBlockBufferCopyDataBytes" could not be located in the dynamic link library CoreMedia.dll'.
    Tried downloading iTunes and updating manually - get exactly the same result.
    No problem using iTunes before this.

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    The error hints at a similar pattern to those discussed in the first and third boxes of the user tip, suggesting that you've got an outdated .dll file that needs replacing. You should find CoreMedia.dll in the one of the following folders:
         C:\Program Files\Common Files\Apple\Mobile Device Support
         C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
    Delete it and then repair Apple Mobile Device Support from the Programs and Features control panel. If that doesn't work go for the full tear down and rebuild.
    tt2

  • Firefox "The procedure entry point PK11_Derive With Template nss3.dll" wont start warning message?

    Firefox will not start warning message "The procedure entry point PK11_Derive With Template nss3.dll" after IE update and zeroing cookies.

    Do a clean reinstall and download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
    Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
    It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    You can skip the step to create a new profile, that is not necessary for this issue.
    See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

  • I just tried updating to iTunes 10.7 on my pc and when I try to launch it I get this error message-The procedure entry point AVCFPlayerSetDirect3DDevice could not be located in the dynamic library AVFoundationCF.dll.  Any Ideas?

    I just tried updating to iTunes 10.7 and when I try to launch it I get this error message-The procedure entry point AVCFPlayerSetDirect3DDevice could not be located in the dynamic library AVFoundationCF.dll.  Them it tells me to re-install iTunes and the same thing happens again.  Any Ideas?

    Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
    Let's try something relatively simple first. Restart the PC. If you're using Vista or 7, now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
    If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (If you've got XP, although the procedure is for Vista and 7, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
    Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever

  • ITunes gives me an error and asks for re-installation, the error is "The procedure entry point CMBlockBufferCopyDataBytes could not be located in the dynamic link library coreMedia.dll", and the iTunes can not be lunched any more

    iTunes gives me an error and asks for re-installation, the error is "The procedure entry point CMBlockBufferCopyDataBytes could not be located in the dynamic link library coreMedia.dll", and the iTunes can not be lunched any more.
    can you please help, as I also tried to re-install it but pr

    Entry point errors can often be fixed by deleting the offending dll, then repairing the component it is part of. CoreMedia.dll is part of Apple Application Support.
    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    If the advice above doesn't resolve things you could try this alternate version:
    iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
    which is a 64-bit installer for the 32-bit version of the core application, similar to previous 64-bit releases.
    Or roll back to the previous build:
    iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
    iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
    tt2

  • I updated iTunes today (Windows).  When I tried to launch, I get the message, ""The procedure entry point AVCFURLAssetInheritURIQueryComponentFromReferencingURIKey could not be located in the dynamic link library AVFoundationCF.dll".

    I updated iTunes today (Windows).  I restarted the computer but when I tried to launch, I get the message, ""The procedure entry point AVCFURLAssetInheritURIQueryComponentFromReferencingURIKey could not be located in the dynamic link library AVFoundationCF.dll".
    I then did a new install of the latest iTunes version and got the same problem.   No more iTunes.
    HELP!!!

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    tt2

  • ITunes 10.7 quits on launch (Windows 7 64 bit) - "The procedure entry point CVDirect3DTextureGetSurface could not be located in the dynamic link library CoreVideo.dll."

    I get the following dialog upon launching iTunes 10.7 on my Windows 7 64 bit
    "The procedure entry point CVDirect3DTextureGetSurface could not be located in the dynamic link library CoreVideo.dll."
    After that another dialog
    "iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows Error 127"
    I repaired iTunes. Same error.
    I uninstalled and reinstalled. Same error.
    Please help.

    Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
    Let's try something relatively simple first. Restart the PC. If you're using Vista or 7, now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
    If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (If you've got XP, although the procedure is for Vista and 7, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
    Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever

  • Since two days my MSN messenger service will not launch any more

    Since two days my MSN messenger service will not launch any more saying that I am either not connected to the internet or that the service is unavailable. Neither is the case as I can access my hotmail directly via the web. What can be causing this all of a sudden and how to rectify it? What am I missing.

    Sounds like you need a hardware repair. Contact Apple using expresslane.apple.com if you are in a country that supports it or call the appropriate phone number on this page. Alternatively carry the MacBook in to an Apple retail store or service provider to ask for an estimate.

  • When starting Windows 7 Sync Notifier reports "The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll." Any suggestions as to how to rectify this issue?

    When starting Windows 7 Sync Notifier reports "The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll." Any suggestions as to how to rectify this issue?

    With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
    Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
    Restart the programme all should be well
    In case that your OS is (64 bit)
    1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
    2. Copy file "SQLite3.dll"
    3. Now paste it in the folder  C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
    4. Restart the programme, it should not display that message, it should be clear.
    Good Luck

  • My problem is on my Windows PC.  I am getting the error message, "The procedure entry point sqlite_3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll.  I am told this is related to iTunes.  Any help?

    I use both a Mac and a PC.  My problem is on my Windows 7 PC.  I am getting the error message, "The procedure entry point sqlite_3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll.  I am told this is related to iTunes.  Any help out there?  Thanks

    With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
    Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
    Restart the programme all should be well
    In case that your OS is (64 bit)
    1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
    2. Copy file "SQLite3.dll"
    3. Now paste it in the folder  C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
    4. Restart the programme, it should not display that message, it should be clear.
    Good Luck

  • I have a error message when i turn on my computer. AppleSyncNotifier.exe - Entry Point Not Found. The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll. Any thoughts?

    I have a error message when i turn on my computer. AppleSyncNotifier.exe - Entry Point Not Found. The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll.
    Any thoughts?

    Found this fix here which worked for me with a similar problem.
    https://discussions.apple.com/thread/3196594?start=0&tstart=0
    With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
    Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
    Reboot and see if all is well.

  • I use Windows Vista. I cannot open icloud control panel. I get the message " the procedure entry point _objc_init_image could not be found in the dynamic link library objc.dll"  Any suggestions?

    error meessage "the procedure entry point _objc_init_image could not be located in the dynamic link library objc.dll"  Any suggestions? so I canot open icloud control panel.

    i ahve same problem

Maybe you are looking for