Flash CS5 slow and not working properly

Dear all,
I have a serious problem on my machine.
Some months ago I bought Master Collection CS5 and worked fine without problem with Flash and Flex.
Last week I took a virus and I need to format and re-install my pc.
After that I re-installed Master Collection but now, Flash is veeeeeeeeeeery slow and some functions doesn't work properly.
for example, if I open a fla file (made before format) and I try to align a symbol on the stage, it doesn't works!!! it makes nothing! I click on the button and nothing happens!
I already try to uninstall and re-install but the problem persist.
The configuration is the same that i had before format, I only updatet my antivirus to Avast 5, but I don't think that's the problem.
My configuration is this:
Notebook HP Pavillion DV6 2056el
Intel i720
4Gb DDR3
nVidia 1Gb
500Gb HD Sata2
Someone can help me?
Regards.
Diego

iloeski wrote:
There has been a crappy firmware update AGAIN..... *sigh*
really ?  ..... the last firmware update was last year December 2014  Firmware: 1.02.17 http://www.wdc.com/wdproducts/updates/?family=wdfwdtv_g2 if you have a problem with a firmware update ... then try rollback to a previous one   http://wdc.custhelp.com/app/answers/detail/a_id/5860/~/how-to-roll-back-the-firmware-on-a-wd-tv-live-hub-media-center,-wd-tv-live

Similar Messages

  • Flash CS5 code hinting not working?

    Just installed the new Flash CS5 trial and code hinting doesn't appear to be working! I have added all my custom class paths in to the AS3 source paths, but I don't get any code hinting for any of these just the same old code hinting you get in CS4. Am I doing something wrong or does it just not work?
    UPDATE: If it helps, in the code editor i get a small yellow triangle with an exclamation mark in, in the bottom right hand corner. When I have over this it advises me:
    " *** Unable to build code hint cache. Please save the associated FLA into a different folder. There are too many files on the classpath. *** "
    This error message appears no matter what FLA/Class i open, and moving it makes no difference.
    UPDATE: Problem solved, the "There are too many files on the classpath" was the clue! Slimmed down my library and all seems to work now.
    However, this does bring me on to another question.. does anyone know how many class files flash can comfortably cache? I use some fairly chunky libraries in my work and am wondering if i'm going to find myself constantly slimming them down after a while?

    The reason everyone gives for AS3 is that AS2 was buggy.
    I don't think so. AS3 is a better language, better designed, more consistent, more powerful. I would switch to AS3 for that, not because of bugs - but I don't know what's the reason behind everyone's choice.
    AS2 was not buggy, people were writing buggy scripts
    AS2 was buggy. Maybe people were writing buggy scripts too, but believe me it was buggy. However AS3 is at the very least equally buggy. It is better designed, more consistent, but equally buggy in its implementation.
    All software have bugs, but programming languages usually undergo a stricter and more thorough revision than other kinds of sofware because the consequences of bugs in a programming language are more disastrous.
    But that's not the case of ActionScript. Maybe because of its history and its legacy, or maybe because Adobe was always dedicated to completely different kinds of software, like PhotoShop, Premiere and the like, and suddenly dove into the business of developing a programming language without having the know-how.
    The level of bugginess of ActionScript is amazing. I work with actionscript daily and there's no day that I don't run 4 ot 5 times into some problem due to some bug. Not that I discover new bugs every day, just run into them - sometimes they are already reported, other times they are not.
    Why should something that took one line of code (clicking on a movieClip
    to move to a frame) now take 5 or more lines of code (creating a
    listener object, assigning a listener object, writing a function).
    It often happens that a language that is in the overall more elegant, consistent and compact, turns out to need a bit more of code for doing the simplest things. Maybe what could be done with 1 line of code now takes 5, but things that took 1000 lines of cumbersome awkward tricky and hacky code can now be done with just 100 of readable and simple-to-understand code.
    When I first learned Java I was surprised at the quantity of code I had to write just to make a program that would print "hello world", while in most dialects of Basic it was just:
    10 PRINT "Hello world"
    Would you say Basic is superior to Java in any sense?
    I teach Flash at a university, both beginner and advanced users. [...]
    I'll stick to AS2 in my classes.
    You should think about the damage you may be doing to your students. If they are going to use ActionScript professionally, they'll have to learn AS3, rather sooner than later. So why not save them the pain to do the effort twice? If instead you are teaching them AS just for didactic purposes (i.e. for learning programming in general) and don't care about practical applications and you don't like the way AS has evolved (i.e. AS3), then consider teaching them another language, instead of an obsolete version of a current one.
    AS3 is not more complicated, or difficult to learn, or less designer-friendly or non-programmer-friendly than AS2. Not at all; rather the opposite. It is more complicated and difficult to learn when you already know AS2, because you feel like everything you knew is useless - but the same can be said about learning AS2 when you already know AS3. Starting from scratch, AS3 is indeed simpler.
    But this have drifted OT, sorry. Back to the topic:
    It's not an app killer, just a minor inconvenience
    It's a major inconvenience if writing the same amount of code takes you three times the time it should take. That in 2010 you have to spell every single property/method/class name entirely from the first to the last letter, when most of the time it should be just a matter of typing a couple of characters and hit tab, is simply ridiculous. You may as well write your code with NotePad. Flash is (among other things) an IDE - something Adobe seemed to neglect up to recently; and when they finally decided to take a step into making it work like any other decent IDE, it does not work!!
    There are bigger things to complain about.
    On this you are definitely right.
    Using their pretty remarkable products (where would we be without PS or
    DW?) is not a right, it's a (sometimes frustrating) privilege.
    It's a privilege you pay for. That's when it becomes a right.
    So Adobe mods, we're frustrated but only because we're all loyal users who depend on your products
    (emphasis is mine)
    Exactly. That's the point.
    Note there's been no helpful answer from them yet: that's how much they care about loyal users who depend on their products.

  • Flash Player installed but not working properly

    I have Windows 7 64 bit, and run IE11.
    I have Adobe Flash Player installed.
    It works fine on my login (administrator) but my young Son can not watch video's, as it says Flash Player is not installed.
    How do I fix this please?

    Flash Player has updated to 11.87.800.175 today; is it working better?
    If not, what means "not working properly"?

  • Time Capsule flashes amber (slow) and not being picked up by Airport Utility; cannot set up Time Capsule

    Airport Time Capsule purchased in Canada, trying to set up in home in Mexico.  Connected to isp via ethernet cable, tried resets and power off/on on both TC and isp modem.  TC flashes amber (slow), and is not picked up by Airport Utility on Macbook or iPad.  Do I have a faulty TC that has to be returned?  Wireless signal from provider is strong and reliable for last 5 yrs.  Please help

    Got it figured :-)  Unable to pick up TC via Airport Utility on MacBook Pro or iPad. Used iPad via Settings-WiFi to pick up TC and enter edit functions. Once WAN deselected, Bridge selected, DHCP selected got the steady green light on the TC.  Airport utility now picks up the TC no problem on both iPad and Macbook.  System now fully operational.

  • My flash video downloader is not working properly, and i can't able to download any videos. Is there any way to fix it ? please help me ...

    Flash video is an add on for firefox, and i used to download videos in that, but now its not working.

    Hey,
    Please link to the addon that you're referring to (search it's name at [http://addons.mozilla.org/ the Mozilla Addons site]).
    Thanks!
    Curtis

  • My Adobe Flash CS5.5 did not work while it is opening a .fla with big size

    This is a very serious trouble...
    I have a .fla with 101MB.
    I always use this file and there is no problem on opening this file before.
    This morning , I found that while I am opening the file, Flash did not work. It said Adobe Flash CS5.5 stop running <--- (I forgot what is the whole message)
    I have used my computer for only 1 and a half year only,  my I think I have enough RAM and memory to run my Flash CS5.5 , but this problem did not appear before and appear in this morning
    Can somebody tell me what the problem is? Thank you.
    P.S. here is some information of my computer
    CPU : Intel(R) Core(TM) i5 CPU      650 @ 3.20GHz   3.20 GHz
    RAM : 4.00GB (3.18GB available)
    System type: 64-bit

    Set the library as "merge into code" and the problem doesn't happen.

  • Flash CS5 Publish Preview not working

    I am working on Flash CS5 Professional. I have created a simple fla file but not able to Publish->preview the swf file in Google Chrome.
    When I click on Publish Preview it opens a new browser window but nothing happens.What am I doing wrong?

    I'm having the same issue. Flash runs fine in Chrome, except for when I choose File->Publish Preview->Default - HTML in Flash CS5. When I try to Publish Preview, Chrome, my default browser, opens a new tab that is blank. Repeatedly pressing Refresh doesn't do anything for me (it still loads a blank page).
    I just played with it a bit. I think I've got it figured out.
    Flash CS5 loads Chrome with the file address in the address bar, but it doesn't Go. If I copy the address, open a new tab, right-click in the address bar and choose "Paste and go", the Flash file loads. Going back to the original tab (the one opened by Flash when I selected Publish Preview, I pressed Enter in the address bar and the Flash file loaded.

  • Mavericks is slow and nothing works properly now.  How do I go back to Mountain Lion?

    I have an older iMac (purchased in the Spring of 2008).  I've updated the operating systems as new ones have come available and even installed more memory into the machine so the upgrades would continue to work.  With the latest upgrade to Mavericks I'm ready to go backwards.  Mavericks stinks.  Everything runs slowly, I get the "beach ball" all the time, and I'm constantly getting error messages.  I'm thinking maybe I just don't have enough memory to make this work properly.
    So I want to go back to Mountain Lion (which I paid for) but can't find it in my "purchased items" in the App Store and can't seem to figure it out anywhere else.  I have a backup hard drive but I haven't backed up in a LONG time so I don't want to go that route.  I'd rather just do it online.  Can anyone help?  (I'm not very tech savvy, so please keep it simple...)

    You can check to see if the Mountain Lion purchase was hidden.
    Purchases - Hiding/Unhiding
    If that doesn't work, try contacting App Store support.
    Support

  • The button on my iPod touch is hard and not working properly

    I have bought an iPod touch 4G est year (2012) and the start button is hard and sometimes when I give once calcase responds as if twice. I have an iPad and the button is softer and I have friends who have an iPhone and is also soft.
    Regards.

    Try:
    fix for Home button
    iPhone Home Button Not Working or Unresponsive? Try This Fix
    - If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
    - If not under warranty Apple will exchange your iPod for a refurbished one for:
    Apple - Support - iPod - Repair pricing
    You can do it an an Apple store by:
    Apple Retail Store - Genius Bar
    or sent it in to Apple. See:
    Apple - Support - iPod - Service FAQ
    - There are third-party places like the following that will repair the Home button. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

  • Flash Player Installed and not working for Snow Leopard

    I recently installed Snow Leopard a couple days ago and everything seemed fine, but now tonight the flash player doesn't work. I use flash player for my homework for my Philosophy class and all of a sudden it doesn't work, I don't get it. I've installed, re-installed, updated, etc adobe flash player and my mac and nothings worked, I don't know whats going on. Please help.

    Sorry, I know nothing about Mac OS; all I can do is point you to the troubleshooting page http://kb2.adobe.com/cps/865/cpsid_86551.html

  • After installation photoshop cs5 extended is not working properly

    don't know what the problem is?

    don't know what the problem is?
    And neither do we. Sorry, you need to provide much more information - operating system, system specs, what is not working.
    Mylenium

  • IMac- crashed in Safari then reboot is flaky (slow and not working) :(

    Daughter was running Safari and screen locked up. Mouse would move but nothing else worked.
    Couldn't call up force quite, menus not working, nothing.
    Hold power button to shut it off. Waited a few minutes then powered back up.
    Took a long time (+10 minutes) to get to login screen.
    Didn't work right. Click a name and it would beachball. Sometimes, it would drop to the password but red dots pop up on screen and it locked up.
    Disconneccted everything but keyboard.
    Same, same, same.
    Started in Single User and ran applejack auto restart.
    Same thing.
    Ran applejack AUTO restart.
    Same thing.
    Ran Apple Hardware test. Passed.
    Reset PRAM and PMU/SMU.
    If I let it go, it might make it to the login screen but no further. Most of the time it gets to the blue screen (after gray Apple) then beachballs.
    Plugged in FW drive with 10.5.8 and hold option and the selection screen comes up real quick but after I select external (or internal or DVD), takes a long time to get there.
    System DVD works but takes while to boot.
    Internal or external take a long time then doesn't make it all the way.
    If I hold Shift (safe boot), it takes a while (~5 minutes) but it does get thru and works okay.
    External drive has not been updated for a few months so the OS on it
    Disk utility on both drives is fine.
    SMART status on internal is fine.
    Disk Warrior is fine.
    Apple Hardware test is fine.
    Battery on motherboard? Nothing seems to have been reset.

    4 bad capacitors!!!
    And this was a replacement MB (bad USB port) installed by Apple ~June '08 ...
    The MB serial number is just above the covered serial numbers in the G5 repair extension.
    Doubt Apple will do anything for me at this point.
    It works in safe boot.
    Guess it's time for a new 'puter.
    I'll get some capacitors and change them out, see if I can get it working correctly and use it for iTunes in the living room.
    I wanted to change the heat sink compund (it always ran right at 160 degrees when doing anything) but was waiting from an excuse to take it apart.

  • Mail Version 6.5 (1508) Slow and not functioning properly

    I recently upgraded to Mail, Version 6.5 (1508)
    I find it extreemly slow - I continually get a "Loading" message on the preview window - This never occured with the previous version.
    In addition, some emails are not coming in, I can see them on my iPad but now on my iMac
    I have iCloud and Gmail running on Mail V6.5.
    Anyone else experiencing the same problems?

    Quit Mail. Force quit if necessary.
    Back up all data. That means you know you can restore the Mail database, no matter what happens.
    Triple-click the text on the line below to select it:
    ~/Library/Mail/V2/MailData/Envelope Index
    Copy the selected text to the Clipboard (command-C). In the Finder, select
    Go ▹ Go to Folder
    from the menu bar. Paste into the box that opens (command-V), then press return.
    A Finder window will open with a file selected. Move the selected file to the Desktop, leaving the window open. Other files in the folder may have names that begin with "Envelope Index". Move those files, if any, to the Trash.
    Log out and log back in. Relaunch Mail. It should prompt you to re-import your messages. You may get a warning that the index is corrupt and that Mail has to quit. Click OK.
    Test. If Mail now works as expected, you can delete the file you moved to the Desktop. Otherwise, post your results.

  • On macbook pro photoshop is slow and not working.  In activity monitor I get switchboard nor responding

    photoshop bridge on my 3 year old mac pro has become inoperable.  In activity monitor is is using 180+ percent of CPU.  I also get switchboard not operating.  I deleted all of photoshop and bridge and reloaded them.  Same problem.  Does anyone know a solution.  Setting up a new user account has been suggested.
    Thank you

    Hi @Tom,
    Thanks for your response.  "Camera Uploads" is a folder in which Dropbox deposits all my photos and movie clips from my cameras.  It is a rather enormous folder likely exceeding several gigs of media.
    The file path is
    /Users/bpg/Dropbox/Camera Uploads/
    I really don't know the difference between "media" and "events".  I consider media a group or bunch of photos and movie clips.  I consider "events" a specific bucket or container of photos and movie clips.  If I should know more, a reference to documentation or an explanation of the difference would receive "This helped me."  If you could explain how to get FCPX working again (it just won't do anything beyond the splash screen), I will provide "This solved my question."
    Thanks for your help!

  • Problems transferring my mini DV tapes to Imovie.  Slow and not working correctly

    I have an older Mac Book (early 2008) and I am transferring my mini DV tapes to Imovie.  I borrowed a camcorder from my brother and have been importing the videos over the course of a few days.  Although I have plenty of storage, every command I made would take 5-10 minutes.  When the downloads were complete, I noticed the video either didn't come out (1 second clips) or they didn't come out well at all (screeching sounds, skipping, etc.) even though when I played the tapes on the camcorder, they worked fine.
    I am in the process of improving my RAM from 2 GB to 4 but it's not fixing the problems I'm having with the transferring of the video tapes.
    I want to manipulate these videos in Imovie (of my kids when they were babies) so i can create a mini-movie out of them.

    Scene detection normally works, so there must be something going on with you old camera.
    I have a bunch of old analog 8MM tapes that I imported through a DV 8MM Digital camera. These all came in as 1 long clip.
    It is true you can delete a frame and then use iMovie to split the events. However, I have found a much quicker way that is non-destructive and allows you to enter the date metadata.
    1) Download and install MPEG Streamclip from Squared 5. You can google it.
    2) Drag your long clip into MPEG Streamclip. (If you don't know where it is, Right-click on the clip in the imovie event and select "Reveal in FInder".
    3) Think if dividing your long clip into Events (everything you shot on a single day, for example) - and Scenes (clips) - an individual unit of footage within the Event.
    4) Move the MPEG Streamclip playhead to the beginning of the 1st scene and press I for in point. Movie the Playhead to the last frame of the scene and press O for out point.
    5) Now, FILE/EXPORT TO DV. Save it to a location you can easily find, like a folder on your desktop. Give it name in the following format: clip-yyyy-mm-dd hh;mm;ss.dv This will preserve the time metadata for later when you are editing. You may want to have your camera handy so you can easily see this data.
    6) Repeat this process until you have all clips done. You should find that the playhead is still at the out point. You can simply type I and you have set the in point for a totally nondestructive capture of the next clip.
    7) Finally, open iMovie and use FILE/IMPORT/MOVIES... and navigate to the place where you saved all these clips. iMovie will import and sort into Events (you may have to check "split days into new events". Let it generate thumbnails and you are done.

Maybe you are looking for