Flash CS5 wont open after working for years? Entry point Not Found

Hi Guys,
I am having a problem opening my Flash CS5 after it working fine since I installed it forever ago. I do not know what could have caused this, and my other cs5 programs are opening fine.
Dreamweaver and Fireworks didnt change all (these 3; along with Flash; are what I use most)
I also open photoshop and aftereffects from my master collection for testing and they opened fine also. I ran a scan using microsoft essentials and found nothing.
I tried run as administrator on flash and it said the same thing.
I am using windows 7 Ultimate N SP1 64 bit
Here is the alert in text.
flash.exe -Entry Point Not Found
The procedure entry point ?ButtonChanged@UI_ClearButtonTextEdit@controls@dvaui@@UAEXP
AVUI_ButtonChangedMessage@23@@Z could not be located in the
dynamic link library dvaui.dll
Please let me know what is going on here.
Thanks, I really appreciate the help.
Randy

You should be able to cherry pick Flash out to uninstall and reinstall it from the master suite installer if I remember correctly. There's nothing wrong with a fresh reinstall, especially after years. That's a long time to be bulletproof.
Otherwise I can't hand you a commercial DLL but I really don't think your problems will be fixed even if I did. I think it's just hardware doing what it's notorious for, eventually having a fault somewhere. A reinstall of Flash should be fast and will write to new sectors and fix the file.

Similar Messages

Thunbird won't open after update, I get Entry point not found cubeb_get_min_latency could not be located in gkmedias.dll

Thunderbird has just failed after an update. It doesn't open. I get the following message:
Entry point not found cubeb_get_min_latency could not be located in gkmedias.dll
Any help on what I can do to deal with this?
Many thanks,
Chris

''AscotAles [[#question-1037793|said]]''
<blockquote>
Thunderbird has just failed after an update. It doesn't open. I get the following message:
Entry point not found cubeb_get_min_latency could not be located in gkmedias.dll
Any help on what I can do to deal with this?
Many thanks,
Chris
</blockquote>
Thanks Finitarry, that's solved it & all my emails are still there. Excellent!

I've had i tunes for a year or two and even after a reinstall,I can't access my itunes because of an error7 or windows error 127.Entry point not found.What do I do???please help

I've had itunes now for a while.Now when i try and access itunes i get an error of entry point not found.and an error 7 windows error127.Says to reinstall itunes.I do and get the same result.What do I need to do....please help....

Often that's caused by damage to one of the other software components.
I'd try the following document first:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
(If you're running XP, there's a link to the equivalent instructions for that OS in the document.)

After updating, install error "Install Flash Player.exe - Entry point not found"

My current version of Flash Player is: 11.1.102.55. Then after an Update is performed and the download is downloaded, then it tries to install the download and an error message occurs. The error message says - Install Flash Player.exe - Entry point not found - then it says The procedure entry point SetDllDirectoryW could not be located in the dynamic link library KERNAL32.dll.
When I try to uninstall Flash Player I get the same error message above except that it says Uninstall_Flash_Player.exe instead of Install Flash Player.exe.
I'm running WIN2000, my current version of Flash Player is 11.1.102.55 and I’m running Firefox version 12.0.

I believe 10.1.102.64 was the last supported version of Flash Player for Win2k. That being said, there have been numerous users that have been able to work around the error you are receiving. Please see this post for details:
http://forums.adobe.com/message/4218334#4218334

Itunes wont open at all, error message : quicktime was not found .... please reinstall ... i did that but no luck this only seems to have happened since the 10.4 update, im on windows 7 ..

itunes wont open at all, error message : quicktime was not found .... please reinstall ... i did that but no luck this only seems to have happened since the 10.4 update, im on windows 7 ..

Can you start QuickTime on your computer?
You'll probably have to search for the Windows Installer Cleanup Utility and use it to remove QuickTime Player and iTunes. Then download and install the iTunes again.

While opening em console for soa -- Error 404--Not Found

Hi Gurus,
i installed SOA 11.1.1.5.0 wilh admin server ,soa_server,bam_server.
while opeing the fm control using http://<hostname>.<domainname>:7001/em.
the below error message is displaying .
but i am able to open with http://<hostname>.<domainname>:7001/console.
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.5 404 Not Found
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.
Please can someone guide me how to resolve this.
Thanks
San

While opening em console for soa -- Error 404--Not Found
Regards,
Anuj

Entry point not found - iTunes 10.7 for Windows (64-bit) reinstall

After ignoring iTunes update prompts for about 2 years, I recently tried updating to the latest version (12.1) without success. After searching for solutions to this problem online, I decided to uninstall iTunes and try reverting back to iTunes 10.7 for Windows 64-bit (on my Windows Vista laptop).
At this point I have installed, repaired, uninstalled, reinstalled, and repaired the 10.7 version and am still unable to access iTunes. When I try to launch iTunes, I get the following error messages:
"iTunes.exe - Entry Point Not Found
The procedure entry point CMTimeRangeMakeFromDictionary could not be located in the dynamic link library CoreMedia.dll."
When I click OK, I then get:
"iTunes was not installed correctly. Please reinstall iTunes.
Error 7 (Windows error 127)"
(As I stated above, reinstalling hasn't worked!)
In my online troubleshooting searches, I've found posts regarding entry point issues but none with "CMTimeRangeMakeFromDictionary" or "CoreMedia.dll" in them. I'm unsure what to do next (should I attempt iTunes 12.1 again?), and my biggest concern is that I will somehow lose all my music. Any help would be greatly appreciated! Thank you

Entry point errors can often be fixed by deleting the offending dll, then repairing the component it is part of. CoreMedia.dll is part of Apple Application Support.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If the advice above doesn't resolve things you could try this alternate version:
iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
which is a 64-bit installer for the 32-bit version of the core application, similar to previous 64-bit releases.
Or roll back to the previous build:
iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
tt2

HT1688 I have a PC computer and an I-phone 4s. I set up an i-tunes acct online w/ icloud. after a recent update my computer started receiving an error message on start up. it says "AppleSyncNotifier.exe - Entry Point Not Found". I click OK and it move

I have a PC computer and an i-phone 4S. I set up an i-tunes acct online w/ icloud. After a recent update my PC started receiving an error message on start up. It says "AppleSyncNotifier.exe - Entry Point Not Found". It also says, " The procedure entry point smlTextreaderConstName could not be located in the dynamic link library libxml2.dll". I click on OK and it moves on. It doesn't seem to affect my computer, but it's annoying. Any ideas on correcting this?

UPDATE - (Made a second post so it'd be clearer)
I uninstalled Office 2003, then iTunes, then all of the associated software (Mobile Device Support, Apple Update, Quicktime, EVERYTHING)
Reinstalled Office 2003, then Office 2003's Service Pack 3, then all Microsoft Updates for Office 2003. Then I configured a blank Outlook profile, no data other than the IMAP info for my .Mac/Me account. Then I downloaded (didn't used my existing copy) of iTunes 7.7 and reinstalled. Sync'd phone. Changed MobileMe settings. Told it to sync contacts and calendar with Outlook. It warned me because it was the first sync. Told it to take ALL of the MobileMe data and replace the data on the computer (which was blank.) NOTHING showed up in Outlook. When I tell it to sync Contacts with the Windows Address Book, it works fine.
In Conclusion, it still won't sync with Outlook, when it's set to Sync with Outlook I still get the annoying MAPI errors. So I switched to to Sync the Contacts with the Windows Address Book, and I'm backing up my WAB file now with my nightly backups.
I suppose we'll see if it gets fixed when I format/reinstall on Vista Ultimate in the next month or two. If anyone has any suggestions, I'm open and willing to try them.
On a completely unproductive note: Despite my love for Exchange, I hate MAPI.

ITunes.exe - entry point not found - VideoToolbox.dll error - can't open!

hello, can somebody please help me...
Everytime i open iTunes it comes up with this error message:
The procedure entry point VTSelectAndCreateVideoDecoderInstance could not be located in the dynamics link libary VideoTookbox.dll.
I've tried uninstalling, reinstalling, and deleting all iTunes and Quickime files and programs but it still wont work...
Please help me, Thanks!

*Replying to smyth_m*
So I followed the instructions and downloaded the newest version of iTunes like it told me, but after I did that, When I would attempt to get on iTunes an iTunes.exe - Entry Point Not found messege would come up. And it says The procedure entry point sqlite3preparev2 could not be located in the dynamic link library SQLite3.dll.
That's a different one, smyth. At the moment, you could try basiam's workaround from the following post:
http://discussions.apple.com/thread.jspa?messageID=10444196#10444196
... however, this could possibly cause trouble in its own right next time you upgrade iTunes, given that there will be a misplaced, older SQLite3.dll in system32 ... So be sure to remember you've got that dll down there, and if you get an odd message about SQLite3.dll when you try launching iTunes *after your next iTunes upgrade,* delete the old copy of the dll in system32 and see if you get a normal launch without it there.

Itunes 11 will not open itunes.exe entry point not found

Every time I try to launch itunes this message box shows up:
iTunes.exe - Entry Point Not Found
The procedure entry point kCVKmageBufferChromaSubsampling_420 could not be located in the dynamic link library CoreVideo.dll
When I click ok another message box shows up:
iTunes
iTunes was not installed correctly. Please reinstall iTunes.
Error 7 (Windows error 127)
I redownloaded itunes directly from apple.com. I clicked on the repair option. It completed. The error is still happening. I have been using itunes for over 10 years with no problems until now.
PC info:
Windows 7 32bit service pack 1 x86
3GB ram
AMD Athlon 64 processor 3500+ 2.20 GHz
NVIDIA GeForce 210 video card 2.2 GB
Also I used the Firefox browser to download itunes.

update:
I just restarted my computer. Now it seems to be working fine. Next time I update itunes I'll just restart my computer twice.

ITunes.exe - Entry Point Not Found - QTCF error popup - can't open iTunes

Hi, whenever I try to open iTunes I also get this message:
iTunes.exe - Entry Point Not Found
The procedure entry point QTCF_CFUniCharGetUnicodePropertyDataForPlane could not be located in the dynamic link library QTCF.dll
I've tried uninstalling iTunes then reisntalling, uninstalling Quicktime, rebooted and I still get the same problem. I also moved QTCF.dll into iTunes. Still get the same error. I also tried a system restore, and I STILL get the same error.
I tried removing everything and turing off my antivirus and I still get this message and my iTunes does not work. Also when the message comes on it will not go away until I re-start my system. Any help out there on this???
Thanks.

*Replying to smyth_m*
So I followed the instructions and downloaded the newest version of iTunes like it told me, but after I did that, When I would attempt to get on iTunes an iTunes.exe - Entry Point Not found messege would come up. And it says The procedure entry point sqlite3preparev2 could not be located in the dynamic link library SQLite3.dll.
That's a different one, smyth. At the moment, you could try basiam's workaround from the following post:
http://discussions.apple.com/thread.jspa?messageID=10444196#10444196
... however, this could possibly cause trouble in its own right next time you upgrade iTunes, given that there will be a misplaced, older SQLite3.dll in system32 ... So be sure to remember you've got that dll down there, and if you get an odd message about SQLite3.dll when you try launching iTunes *after your next iTunes upgrade,* delete the old copy of the dll in system32 and see if you get a normal launch without it there.

Can't open Icloud. "The entry point not found". Can't reinstall until I open Icloud and log out but I can't access it.

I am trying to re-install Icloud, however I can't redownload until I uninstall Icloud, but I can't uninstall until I log out in the Icloud Control Panel. The problem is that I can't open Icloud to log out because it says Entry point not found. I'm having an issue with all aspects of this!

I see you still have your smc0. I'm working on my first attempt at OSB and Oracle support said we have to remove rmt0, rmt1, smc0 before we can install OSB. They saw it in the device list and said those devices must already be taken.
Is you setup working for OSB and regular mksysb & sysback too with the Atape.driver?

APSdaemon.exe entry point not found? also itunes won't open.

ever since i updated my itunes/quicktime, this has been popping up at startup. today i tried opening itunes and i also got an error "itunes.exe entry point not found. the procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll". earlier, i had an error with sqlite3 but i managed to fix it my copying the file elsewhere.
not sure whats going on though. thanks for the help in advance.

Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. Now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair".
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post:
Re: I recently updated to vista service pack 2 and I updated to itunes

Updated to 10.5 on XP and now iTunes will NOT open - Entry Point Not Found - HELP!

Tried to update to iTunes 10.5 on Windows XP. Everything seemed to install properly and I restarted. However, when I try to open iTunes, it will not open and I get the following error message:
iTunes.exe - Entry Point Not Found
'The procedure entry point AVCFAssetClassWithByteStreamAndOptions coulf not be located in the dynamic link library AVFoundationCF.dll'
When I click 'OK' (which is the only option), it says:
'iTunes was not installed correctly. Please reinstall iTunes.
Error 7 (Windows error 127)'
I have updated iTunes on my machine in the past numerous times without ever having an issue. Now, I get this and cannot access iTunes at all. I have tried reinstalling 10.5 and restarting my machine about five times now...to no avail. I am hesitant to remove iTunes, since I have 6000 songs and do not want to lose my library. Is there anything I can do? Seems like it should be a simple fix.
When I called Apple, they told me to upgrade my OS to Vista. Huh? That seems like overkill to me. iTunes has always run fine on XP.
Please help!

I found another site and it suggested that I go through System Preferences and check downloads again. The iTunes update was still there indicating that it still needed to be downloaded. So I downloaded it again and now it works fine. I hope this might help someone else.
Thank you

ITunes.exe - Entry Point Not Found itunes will install but wont run!!!!!!!!

I updated itunes and it wont work. i unistalled all apple apps, about 5 to 10 times. i get this message on my HP 530,32 bit windows vista. At the top in the error window it says
*iTunes.exe - Entry Point Not Found* Then under that in the error box it says:
*The procedure entry point*
*QTCF_CFUniCharGetUnicodePropertyDataForPlane could not be located in the dynamic link library QTCF.dll.*
What do i DO PLEASE HELP ME OUT!!!!!!!!

I found the qtcf.dll file in the sys32 moved it to the desktop tried iTunes and still same error message as above.
Okay ... sometimes there can be multiple copies of them lurking about on a PC.
Try heading into Computer, and typing QTCF.dll in your Search field. When Vista tells you it can't find the file, click "advanced" and tick the "Search hidden, non-indexed and system files (might be slow)" and then start another search.
This search *will indeed be slow.* Wait until the green progress bar up at the top of the screen has completely vanished, otherwise you might accidentally stop the search too soon.
What copies of QTCF.dll do you find, and where are their file locations? (The default location on a 32-bit Vista PC is in C:\Program Files\QuickTime\QTSystem\QTCF.dll)

Flash CS5 wont open after working for years? Entry point Not Found

Similar Messages

Maybe you are looking for