Flash CS6 Trial (Mac Lion) won't start up...

When I launch the program, the splash screen loads up to the point of "Loading Accelerators" and becomes unresponsive. I have to Force Quit the application and never get to use the software.
What can I do to identify and solve the issue?

I have the same issue (only intermittent) but I have a licensed install, no error on install. This started on my Mac OS 10.7.4 after recent update to Flash CS6. No problem on my PC. With tenacity I do sometimes get it to launch (takes over 60 seconds). No clue yet as to the issue.

Similar Messages

Lion won't start stuck in loop?

Lion won't start, stuck in loop

This morning my Dual-Core Intel Xeon, Mac begins start up, then turns completely off. My (own) memory is faulty, but I think I've upgraded to 10.7.5.
At first it was stuck in start up so I turned it off then on again.
My first warning was when I came into the office this morning and the APC was beeping. Why? That's a mystery too, because its battery appears to be fine, and turning it off then on again the "green" operating light shines as normal. Funny though, when I turned the APC off then on, the computer tried to start up, but I'd shut it down the night before, ...unless, and here's again a memory glitch, ...I may have let it "sleep" overnight, though that would be highly unusual for me.
Hints?

Mac Mini won't start and constantly makes disc ejecting noise

My Mac Mini won't start. It was working fine, then just locked up and won't start again. When I push the start button it just makes this repeated disc ejecting noise from the DVD drive. It doesn't make the chime noise or display anything on the monitor. I've disconnected the optical drive, but it didn't help. Then it just doesn't start at all. I thought that if I would disconnect the optical drive, that it would ignore it and just boot off the hard drive, but nothing happened. The power light comes on. Then, if I hold down the power button for 10 seconds it shuts down. The fan operates. It just never attempts to boot up. I can't put in a system DVD because the optical drive is just in eternal eject mode.
If you have any suggestions let me know. Thanks.

I have the same situation.
I think the drive thinks it has a disc to eject or part of the mechanism is stuck and can't return to it's resting position. I was going to disconnect as you tried but now I think I'll try to disassemble the drive to see if there might be some debris jamming things up.
Please let me know if you solve the problem.

Mac Mini won't start after installing OS X 10.6.3

My Mac Mini won't start after installing Mac OS X Snow Leopard 10.6.3. When I turn it on, the Apple logo appears and the initialization line starts to fill, but it suddenly stops. It does that again and stops at the same point, but this time it shuts down. What should I do?

If you are coming from 10.5.8, hopefully you backed up your important data first. Your mini will need at minimum, 1 GB of RAM to install Snow Leopard and at least 5 GB of storage remaining on your boot drive.
I treat 10.6.3 as a fresh, full install over a 10.5.8 system. That means I choose Disk Utility from the Installer's menu and repartition the boot drive as a single partition, Mac OS X Extended (Journaled) format, and use the GUID partition scheme from the options button. At this point, while still in Disk Utility, I would verify the drive under First Aid.
Then I turn the installer loose, and reboot into a working 10.6.3 system, ready for the software updates that take the machine to 10.6.8.
So, following the above guidelines, reinstall 10.6.3.

HT201612 What happens if my Mac OS won't start?

At startup, my Mac software won't start after switching from Boot Camp. It simply attemps to load the software and then shuts down and/or restarts to my Windows software.

Welcome to Apple Support Communities
What OS X version have you got?

Mac mini won't start up. Grey screen with apple just freezes.

Mac mini won't start up. just get a grey screen with the apple and it freezes. Please help.

Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
If 10.7.0 or later...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partitirion & use Disk Utility from there to Repair the Disk, then Repair Permissions.

Download flash cs6 trial

I want to download flash cs6 trial version.
But it is not available. only flash cc is available.
help?

http://prodesigntools.com/adobe-cs6-direct-download-links.html
Follow ALL instructions on the page VERY CAREFULLY. The download links WILL NOT work if you don't log in with your Adobe ID.

My Mac Pro won't start. It turns on and then a blank, white screen appears. What do I do?, My Mac Book Pro won't start. It turns on and then a blank, white screen appears. What do I do?

Mac Pro won't start. It turns on and than a blank, white screen appears. What do I do?

This could be a software/state problem or a hardware problem. Here are steps to resolve the former.
Mac OS X: Gray screen appears during startup
http://support.apple.com/kb/TS2570

My Mac Pro won't start

My mac pro won't start have a light on and sometimes have a green light on caps key.

Hello there hoc5050,
It sounds like your computer is not turning on consistently. I would recommend the troubleshooting in this article to help you determine what might be causing the issue, named:
Troubleshooting: My computer won't turn on
Thank you for using Apple Support Communities.
Cheers,
Sterling

My Mac Mini won't start. The Power light blinks continusly (not pulses)

My New Mac Mini won't start up. I bought it online from J&R a week ago. My monitor says "no input detected" and the power light blinks. I recently fed it the gray mac os x install disk one, which it won't give back. Holding the mouse button when it turns on doesn't have any effect. So now i can't put a disk in or start it up.

Welcome to the Apple discussions.
No video with the power light blinking once per second means either bad or no memory. See this Apple note: http://docs.info.apple.com/article.html?artnum=303083 . Specifically, below is from that note:
If the computer detects no SDRAM (Synchronous Dynamic Random Access Memory, also referred to as RAM) or the RAM installed does not meet the appropriate specifications, the screen will remain black but the power LED on the front of the computer will blink once per second to signal the error. This error condition may be due to physically damaged RAM, installing the incorrect type of RAM, or not having RAM installed.
Has it ever worked since you got it? If not, you should call J&R and tell them they sent a dead on arrival system, and ask for a replacement (ask them to send a will call tag or prepaid label to send the non-working machine back).

My mac mini won't start up!

My mac mini won't start up but it will turn on, staying at the gray apple logo screen and nothing else.
I came home yesterday and it wouldn't 'wake up' from 'sleep' mode so I turned it off and tried to turn it back on. There's a netflix cd in there that I also can't get out. My friend suggested i slip a piece of paper in there and that it will eject, but this isn't working (maybe I'm doing this wrong?)
help! thanks.

I have the same problem. In addition, the same happens when attempting to boot from a DVD. I was able to boot it up in Target Disc Mode, and even erase the internal HD entirely, but I still cannot boot from DVD to reinstall the OS. I have tried the SMC reset, but to no avail. Also, while I can reset the PRAM, I cannot reset the Open Firmware. Any suggestions?

Help! my Mac Mini won't start up!

Hi,
Bought my Mac Mini (server editino) a week ago. Been playing with it & so far so good.
But tonight, I went 'Log off administrator', it thought about it for a while and the screen when blue and flashed every now and then. I forced shut down by holding down the power button at the back.
Now, it won't start up at all. When I push power button, I hear the chime & I get the white screen with the Apple log with the spinning thing at the bottom. It stays here forever...
I've tried reseting the PMU and the SMC. No difference.
I've also tried doing a remote reinstall from my other MAC. The Mac Mini picks up the remote DVD drive but then when I click on it, it does the same thing... spin spin spin...
Any ideas guys? thanks in advance!!

ok, on my 5th attempt at doing a remote install it actually worked... I'm in the process of reinstalling Snow Leopard Server now... fingers crossed...
can't believe I killed it within 1 week!

Flash Builder 4 Installed, But Won't Start

I installed Flash Builder 4. The installation completed without a hitch, but the application won't start. Here are the log files from \Local Settings\Temp and Adobe Flash Builder 4\.metadata.
amt3.log - http://pastebin.com/snrXFkfD
\metadata\.log - http://pastebin.com/BkmVBBU5
Any idea regarding what I am doing wrong? I have Eclipse on my comp, but I have installed the standalone version of FB 4 trial.

> Even if the trial has expired shouldn't the screen with buy now appear?
Yes, that's what I would expect too. Sometimes there are situations where previously installed Prerelease versions (beta versions from Adobe Labs) can interfere with that though, especially with multiple users on a given machine in a Lab setting.
> I can requisition a full license from the sysadmin.
Good idea - that's probably your best shot at getting FB4 activated on that machine, without needing to re-image it. After you obtain an FB4 serial number, you should be able to enter it at install-time to activate the license.
-Chris

Mac air won't start after attempt to upgrade OS to Maverick

I was prompted by APP store that a new OS Merverick was available so I decided to install.
I downloaded the OS via APP shop (therefore no disc) and check for the updates for other software before restarted the Mac.
Since then, it won't start up the system and keep stack on the grey screen with a apple mark.
Having checked some forum in the Apple Support Communities, I managed to open a disc utilities and tried to repair.
At the first instance, there were some error occurred, but after few attempt with the disc utilities it now says that HD is fine.
However, main HD which is displayed on the left side of disc utilities is gray and I can repair permission.
It also says that HD (journalled) which terminology that I have no idea what this means.
Several attempt with the disc utilities, when I tried to restart "Apple symbol" appeares and several second later the "NO ENTRY" symbol appears and get stuck.
At this point, I decided to re-install OS X Lion from the CD, but when I try to select the HD is says that HD is locked.
I am completely lost to what to do next.
I have several files on this MAC which I would like to rescue if possible.
I have never had any issue with HD and I can only deduce that this was caused by the new OS installation.
Could someone help please?
Thanks.

How to create an OS X Lion installation disc
How to prepare your Mac for OS X 10.7 Lion
OS X Lion Unable to download OS X Lion wireless
Lion Installer reports This disk cannot be used to start up your computer
Lion Recovery Disk Assistant
Mac OS X v10.6, OS X Lion Cannot install Mac OS X
OS X Lion About Lion Recovery
Try Lion Community, and MacBook Pro
Lion Mac OS X Communities
MacBook Pro

Power Mac G5 won't start up and is beeping

Dear friends,
This morning, my Power Mac G5 started to beep. When I try to restart it, it beeps some more and also makes a clicking sound like a metronome.
The computer won't start up anymore. At startup, it displays a grey screen with a little folder in the center that flashes a question mark and a finder icon.
What is wrong with my excellent computer, and how do I fix it?
Marnie

Marnie Glickman-
Could be a variety of things, but most likely your hard drive is not happy. The flashing question mark means that the system is trying to find a working disk with a valid system on it. Should be the hard drive. Isn't.
Launch from the install DVD of the latest OSX system you have. Under the Apple Menu should be the Disk Utility. Launch it and try repairing your hard drive and see if that does the trick.
If not we dig deeper into this excellent problem.
Luck-
-DaddyPaycheck

Flash CS6 Trial (Mac Lion) won't start up...

Similar Messages

Maybe you are looking for