Flash CS6 unable to open in Yosemite

I have:
uninstalled Flash CS6
installed latest Java v8 update 31
reinstalled Flash CS6
Still get message that it needs legacy Java, which is not recommended for security issues.
Has anyone figured out a way to use Flash CS6 with Yosemite that does not involve old Java installs?
Thanks.

Java for OS X 2014-001

Similar Messages

CS6 - Unable to open files following migration. Computer re-starts each time I attempt to open files.

Following migration from IMac to new MacBook Pro, each time I attempted to work with CS6, computer would re-start. Hard Drive and memory has been replaced and still have same issue. All other applications work fine. Unable to open RAW files now which were previously able to open. I have uninstalled/reinstalled CS6 and still have same issue. Any suggestions? Could this have occurred by something during the migration?

Your best bet at getting help with this usage problem is probably going to be realized through posting in whichever prosduct forum this relates to. If you need to find a specific product forum, the page linked below provides access to all forums Adobe provides - use the dropdown list if your product is not highlighted in the icon-ed links:
http://forums.adobe.com/index.jspa

Flash Drive won't Open after Yosemite upgrade

I recently updated my MacBook Pro 13' to OS X Yosemite. I went to pull some files off of my 16 GB SanDisk Flash Drive and I couldn't get my Mac to recognize it. I was able to open it before the upgrade. The flash drive does show up in Disk Utility, but that doesn't allow me to open it. Any help would be appreciated. Thanks!

I just had a scheduled call with apple support. I showed the representative via screen sharing the error message and the accompanying comments I receive each time when I try to open my Kingston DTVP password protected flash drive. His take on it was that the driver software of my flash drive is not compatible with Yosemite. In theory I have two options:
1 - Upgrade the driver software of my flash drive. I suspect there is only a slight chance that this is possible given that Yosemite is so new so Kingston probably doesn't have an update yet. (I will check with Kingston but their technical support is not open on weekends.) Unfortunately replacing my flash drive is not an option because my employer allows only 2 password protected models to be used on company computers.
2 - Downgrade to the previous operation system (I think it's called Mountain Lion) which I cannot do myself because I don't have TimeMachine on. If I want to do this, I most likely will have to pay for apple support.
I have a MacBook Air 13-inch, purchased in June 2013.

Flash CS6 - Unable to save document (to windows server) [OSX Mavericks]

Since updating to OSX Mavericks, I've been unable to save to our network server (HP Proliant with raid 6 running Windows 2008 R2).
I can save to any given filename once (open an old file from pre-OSX update and then save / create a new file and then save it as something) - any subsequent saves to that file name result in a warning dialogue box similar to this:
The original FLA will also corrupt during the attempted save process. The file size will also bloat.
For example my intial test file is listed as 211KB in finder
I open it perform an amend and save it once - that works fine. My file is still 211KB in finder
I then reopen it for another amend and attempt to save.
The unable to save warning dialogue appears. The file is now 421KB in finder and corrupt.
If I try to resave after the first file save fails the file continues to bloat.
e.g. if I attempt to save it another twice the file will now show as 843KB in finder and still be corrupt

Hi,
While this issue is being fixed, you can recover the corrupted files by following the below steps
1. Change the file extension of your corrupted fla to zip eg: corrupt.fla to corrupt.zip
2. Extract the zip file
3. Open the xfl file from the extracted folder in Flash CC(you will see the file is of up to date and non-corrupted)
Other trivial work-arounds:
1. Save your file as .xfl(uncompressed fla) instead of .fla
2. Connect your shared location via afp protocol on Mac 10.9 whereever-possible
3. Use Mac 10.8 or lower versions if-possible
Thanks!
Mohan

Illustrator (CS6) crashes when opening in Yosemite. Any fixes out there?

I've just jumped from Snow Leopard to Yosemite. I missed out Mavericks because I was too concerned about downtime while bugs got fixed and never got round to doing it. Stupidly I took the opposite approach this time and went straight for the jugular – downloading Yosemite as soon as I could.
Unfortunately Illustrator is not working now and I need a quick fix. As soon as it opens it crashes. It asked me to update Java so I did what I was told. Still nothing.
Please, any help is gratefully received...

Hi Owen,
tried
Can you please let me know which plug-in it was that you deleted?
I have removing every one that I have and nothing has worked thus far.
I deleted Vector Scribe Studio, FontExplorererX and that is all I had... still nothing.
What did you remove and/or update?
Thank you muchly.

After Effects CS6 will not open on Yosemite.

Wondering if anybody has found a fix for this?
All my other Applications are opening, but can NOT access After Effects.
Thanks for any help.

What exact version of After Effects are you using?
If you're on CS6, but not on 11.0.4, you need to update
If it still doesn't work after that, try this: fixing permissions problem that impedes start of Adobe applications

Illustrator CS6 unable to open

When I click open my Illustrator CS6, a pop up with uninstall and reinstall message appeared. It also shown an error with "Error 1".
What should I do and your help are much needed.
TQ

Run the Creative Suite Cleaner Tool, reinstall.
Mylenium

Adobe bridge cs6 unable to open picture and camera raw

it will crash when open the file. can't use camera raw. I use window 7

What camera and version of ACR?

I have created an android app from adobe flash cs6 .The app opens on mobile device except on nexus 7 which has lollipop version? Is there any way to open my app on that device?

please give me the solutions.

Dear Bob,
I downloader a VLS Streamer from the Apple app store. It requires some kind of helper software to run, which, as far as I can tell from the video at the developer's site, allows one to download content from one's mobile device to their computer. Since I don't have a compatible computer for my iPad to link to, the instructions don't help my situation. I emailed them with my query and will probably hear from them sometime this week.
I've lived with this problem for the 3 months I've had my iPad, and I'll keep after it until I have a solution. But right now, I've run out of steam. If this lead helps me to resolve my issue, I'll come back and HELPFUL or RESOLVED every response you've given. I'm very grateful for your help. Sorry I'm so utterly clueless.
Thanks once again. Please don't cringe if I get back to you another day.

Flash CS6 cant open play SWF files without importing and destroying them, how can I get around this?

Flash CS6 can't open play SWF files without importing and destroying them, how can I get around this?
I'm just trying to preview an swf file in flash like I have with all previous versions.

What if my SWF loads external content from an online server?
Not only does the current flash player prohibit such activity, it doesn't even pop open an error anymore saying there was an error connecting to an online source.
Normally, I would simply drag the SWF into Flash and all connections would go through. I could see traces, errors, and experience no issues.
Now I can't even do that. So what then? You have crippled a fundamental use of the program, but THANK GOD we have that deco brush that nobody asked for.
And for the record, the nature of my work benefits from not necessarily allowing the Flash Player to connect to online content. The error it pops up? That's simply another method of error checking that I require. Updating the Flash Player options is not an option.
Why would you even remove this key feature from Flash anyways? It's been there for years ... has the ratio of people importing SWFs (a rather useless gesture in an increasing OOP world) really outweighed the people using Flash as a testing environment that much?

Yosemite and unable to open Illustrator CS6

Hi
Since changing to Yosemite I am unable to open Illustrator CS6 and I get the following message:
"To open "Adobe Illustrator CS6" you need to install the legacy Java SE 6 runtime."
I have followed the link and downloaded "Java for OS X 2014-001" as instructed but doing this does not change anything and I am still unable to open Illustrator.
Can anyone help me and explain to me what I need to do to be able to use Illlustrator again!
Thank you very much.

Teresa, biuzalel,
You should be able to get round the issue altogether without the legacy version (and its security implications), by following this:
http://oliverdowling.com.au/2014/03/28/java-se-8-on-mac-os-x/
It is even more thoroughly described in this thread, see post #3 on by gator soup:
https://forums.adobe.com/thread/1706469

Unable to open RAW files in CS6 after update

Hi all,
I have Photoshop CS6 and have been able to open my D4 Raw files with no issues using the Camera Raw version 7.1 plugin.
Yesterday I upgraded my Mac OS from Snow Leopard to Yosemite (a big jump I agree) and proceeded to update Photoshop to the latest version as well as installing Adobe DNG Converter 8.8.
I am apparently still using the same 7.1 plugin version as I always have but I am now no longer able to open any RAW files through Photoshop as it displays a message saying 'files not recognised' when I try to open them.
Have I skipped too many updates? Do the latest Photoshop CS6 updates leave me unable to open RAW files? Am I being pushed down the CC route?
Could anybody offer any help at all as I have a wedding to edit but cannot open any files!!! Stress!!!
I backed up my system through Time Machine before I did the update but im not sure if I restore that I will still have Yosemite OS running.
Any help or advice really is appreciated.
Many thanks.
Phil

Camera RAW should be at version 8.8 for CS6
Adobe - Photoshop : For Macintosh
Adobe - Adobe Camera Raw and DNG Converter : For Macintosh

Unable to open Nikon D750 RAW files in CS6

Hi all, this is my first time on the forum so please go easy on me!
I have been running cs6 on an iMac Snow Leopard version up until today and have had no problems opening any raw files from either my Nikon D700 or D4. Today I decided I should update my OS and am now running Yosemite.
I Did this as my assistant at a recent wedding has provided me with raw files from a Nikon D750 and I was unable to open them or even update the camer raw plugin through snow leopard (I took a 'if it's not broke then dont fix it' approach to software updates!).
I have now run updates for photoshop through the Help / Updates tabs and these are all up to date.
I have also updated camer raw / dng converter to version 8.8 which supports the D750.
however, I am now no longer able to open any raw files through photoshop. I just get a message saying photoshop does not recognise the file type. I cannot even view the thumbnails of the D750 images in finder.
I Have found the camer raw plugin in my files (through library / Adobe / plugins / cs6 etc.) but this is still detailing a 7.1 version plugin from 2012. I have also found the dng converter version 8.8 in one of the main folders which is different to the existing plugin location although I feel I am out of my depth with this now.
I am obviously doing something incorrect but I'm not sure what. Any help would be extremely appreciated.
many thanks.
Phil

Hi John,
I am running Plugin version 7.3.0.71 (dated 2012). I suppose I need to remove this plugin and replace it with the 8.8 version DNG converter do I?
At the risk of sounding simple, what is the difference between a Camera Raw Plugin and DNG Converter?
At the moment the Camera Raw plugin is in the following folder: Library / Application Support / Adobe / Plug-Ins / CS6 / File Formats.
The new 8.8 DNG Converter is located in directly in the Applications folder.
Yesterday I tried replacing the plugin with the DNG converter in the File Formats folder but this didn't seem to do anything (I deleted the camera raw plugin at the same time).
Thanks for your reply and I hope the above means something to you.
Phil

Flash CS6 professional iOS Player Settings will not open.

Please Help.
I am unable to open the Player Settings pane for iOS.
I can get to the Player Settings for Android and everything else, but if I try to open player settings for iOS, at first nothing happens and then after a while Flash IDE crashes.
It was working at one point yesterday. I was resolving an issue I had related to provisioning profiles. And then all of a sudden I am unable to get to this panel.
I have run uninstall, and CC cleaner and removed all things Adobe from my machine and did a fresh reinstall of Creative Suite 6 Design and Web Premium.
I started a brand new project and still, no Player Settings pane for iOS.
Please Help!

Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_BAD_ACCESS (SIGBUS)
Exception Codes: KERN_PROTECTION_FAILURE at 0x0000000000000008
VM Regions Near 0x8:
--> __PAGEZERO 0000000000000000-0000000000001000 [ 4K] ---/--- SM=NUL /Applications/Adobe Flash CS6/Adobe Flash CS6.app/Contents/MacOS/Adobe Flash CS6
__TEXT 0000000000001000-0000000001b83000 [ 27.5M] r-x/rwx SM=COW /Applications/Adobe Flash CS6/Adobe Flash CS6.app/Contents/MacOS/Adobe Flash CS6
Application Specific Information:
Java information:
Exception type: Bus Error (0xa) at pc=0000000095d1f907
Java VM: Java HotSpot(TM) Client VM (20.65-b04-466.1 mixed mode macosx-x86)
Current thread (000000002b98e400): JavaThread "main" [_thread_in_native, id=-1604730456, stack(00000000bf800000,00000000c0000000)]
Stack: [00000000bf800000,00000000c0000000]

I recently did a system update and installed Yosemite on my Mac. Now I am unable to open CS5 at all. The error message I get is this: "To open Adobe Photoshop CS5.1, you need to install legacy Java SE 6 runtime." I have tried downloading this and it still

I recently did a system update and installed Yosemite on my Mac. Now I am unable to open CS5 at all. The error message I get is this: "To open Adobe Photoshop CS5.1, you need to install legacy Java SE 6 runtime." I have tried downloading this and it still gives me the same mess

In the details it is mentioned that it is an outdated version of Java.
Is this a security risk that i need to live with to get CS5 to run with Yosemite?
Also i need to reject messages from Java in the future about updates, or not?
thx for any input

Flash CS6 unable to open in Yosemite

Similar Messages

Maybe you are looking for