Flash CS6 won't connect

I've downloaded and installed Flash CS6 without any problems, but when I try to run it, it can't connect to the internet (presumably to activate). All other software has no problem connecting. There are no options aside from cancel and retry. My firewall has been turned off but doesn't help. All tech specs are met, except I'm using Vista, not XP or Win7. Is this the only issue? Could it be anything else?

Similar Messages

Flash CS6 won't launch.

Hi there,
My Flash CS6 won't launch anymore. I've used it before but am not able to anymore.
When I start Flash CS6 the loading screen pops up and disappears after a few seconds without starting the program.
Solutions I've tried without results;
- Opening a Flash file directly to start Flash
- Reinstall Flash
Im running Flash on Windows 7 64-bit.
If anyone can help me to get it running it would be greatly appreciated.
Thanks,
Luuk

This might help you
http://www.adobe.com/support/contact/cscleanertool.html

Pr CS6 won't connect to DL server when importing sequence

Pr CS6 will no longer import sequences from another Pr project. The Import Premiere Pro Sequence dialog box opens and at the bottom it reads "Connecting to Dynamic Link server..." and stays that way for about 1-2 minutes. Afterward, in that same text location, it reads "Connecting to Dynamic Link server failed." Clearly Dynamic Link is broken (at least on my system: Windows 7 x64 Ultimate), since my AME also doesn't work when I send a job to it from Pr via Queue. It says it can't find the project file, even though it is there, but failure seems to be with Dynamic Link in that instance as well. This all USED TO WORK FINE, until apparently an update broke something. So much for interoperability.
Is anyone else seeing this issue?
UPDATE:
I have resolved this problem, thanks to another poster on this forum who discovered it. It was the NVidia nView Desktop Manager applet that was breaking dynamic link. I think it has been enabled for a long time, so perhaps a recent CS6 update broke dynamic link in conjunction with nView, but at any rate, disabling the nView Desktop Manager applet solved the issues with dynamic link. I can now import sequences from other projects and use AME to queue jobs. Yay!
Hope this helps others. If you have an NVIDIA graphics card (Quadro, etc.) this may be the solution.

Mark,
Sure! When I open Creative Cloud on my desktop, on the Home screen, there is an Activity Stream. On that stream it lists what apps have been updated and when. I have an entry that says "You updated Premiere Pro CS6 46 days ago" and a little later another one that says "You updated Premiere Pro CS6 98 days ago" then another one that says "You updated Premiere Pro CS6 Family 170 days ago", etc., etc., These are, of course, mixed in with other updates to my other apps in the MC (e.g., Ae, Ps, In, Fl). Since I knew that the last time DL worked was about 130 days ago (when I completed my last project using DL between Pr and AME), then I could see that (based upon the above), that Adobe had updated my Pr CS6 at least twice since that time.
I do not recall messing with nView, and don't know why I would have anyway, but can't say for certain that I didn't enable it during that time. However, there is definitely an issue between DL and NVIDIAs nView applet that should be resolved by the two of you, especially since the card I'm using is 'approved' by Adobe, and I used the Adobe specs to build my system around CS6.
But any credit for this solution should go to the lone poster who actually discovered it back in July, gagneh, in his post here: NVidia nView incompatible with AME & PPR (Connecting to Dynamic Link Server timeout). Perhaps you or someone should post a sticky (if possible) to this issue for NVIDIA users with a descriptive search friendly title. There is really no telling how many of your users are suffering because of this, judging from the sheer number of posts I've been through on this forum dealing with Dynamic Link issues.
Cheers,
Shane

Adobe Flash CS6 won't Export Animated Gif or to Quicktime

I have an fla and need to get the animation into Keynote. The exported swf works fine and I followed the procedure "export to quicktime" the generated .mov file does not have the animation just one frame.
any help please?
RD

I do see the animation is generated off two movieclips in the fla how do I change the movieclip to a graphic?
R

Debug Air iOS app on device with Flash CS6?

Hi,
Is it possible to debug an Air iOS app on device to get all the trace() messages?
I'm using Flash CS6 with the AIR SDK 16.
Thanks

Go to publish settings:
- Select Quick publishing for device debugging and select your LAN/WIFI adapter IP from the list
- Install IPA to your device
- In Flash CS6 go to Debug panel -> Begin Remote Debug Session > ActionScript 3.0
You will see:
Waiting for Player to connect...
in the output panel
Now launch your application on your device. Be sure that you in the same WiFi network with your desktop. If Flash CS6 can't connect to the device and still waiting for it - try to disable firewall.

My 1st Generation time capsule won't connect to the internet thru a new motorola sb6121 - get continuously flashing yellow light. Using a router in between the modem and capsule yields good but slower connection to internet. Any thoughts?

My 1st Generation time capsule won't connect to the internet thru a new motorola sb6121 - get continuously flashing yellow light. Using a router in between the modem and capsule yields good but slower connection to internet. Any thoughts?

Thanks for your response
Let me give the history - I started with an Apple Express being fed thru a D-Link EBTR 2310 cable Router from an RCA DCM315 Modem (Pure). Comcast service all the way.
Got the 1st generation TC in 2008 and merely replaced the Airport Express with the TC. Worked ok
A year or two ago I did try removing the modem and feeding the TC directly from the modem. Resulted in the same condition I have now - Continuous flashing amber on the TC. So I put the router back in the chain.
Some time later, at the recommendation of a Comcast rep, I replaced the router with (a Belkin F5D 5231) to see if speed and dropout problems would be improved. I thought it helped some at the time but now I am not so sure.
Last week I decided to see if a new modem would help with download speeds. So I got another pure cable modem (Motorola SB 6121- high on the Comcast recommended list).
Got up and running easily with Comcast help and with the modem connected directly to a computer.
Next I put the TC in the link and again could not get past the TC continuing to flash amber. Although I did get connected to the internet with this configuration I lost connection two both of my printers - one connected by USB and the other wirelessly to the TC. Again everything works fine when I put the Belkin router back in the system.
However with the router in there, the modem shows the downstream connection to be 10/100 ethernet speed. (Modem light changes color for indicating speeds.}
I have gone thru all of the combinations of powering down/ up, but all stays the same.
I can live with what I have but something still doesn’t seem right.
Thanks again

TS3048 I'm having a difficult time getting my wireless keyboard & trackpad to work w/my iMac. I just changed the batteries on both devises but for some reason, after turning on and seeing the green light flash on both devises, won't connect to iMac. Pleas

I'm having a difficult time getting my wireless keyboard & trackpad to work w/my iMac. I just changed the batteries on both devises but for some reason, after turning on and seeing the green light flash on both devises, both won't connect to iMac. Please help...

Hello:
Try resetting the SMC:
http://support.apple.com/kb/HT3964
Barry

Flash CS6: Android debug "unable to connect to the debugger"

I'm using Flash CS6 on a Windows 7 machine. I'm trying to debug on a Nexus 4 (yes, USB debugging is enabled on the device).
When I select "AIR Settings > Deployment > Debug" and publish, the app is installed on my device but it just shows a black screen for awhile, then finally a dialog on my phone appears that says:
Adobe AIR
Unable to connect to the debugger (MyPC.home)
Enter IP address or Hostname:
[text input]
[OK] [Cancel]
Neither IP or hostname seems to connect the debugger.
If I press Cancel I can use the app. I can also deploy the app as "Device release" just fine. I just don't get any debug output in Flash Pro, which makes debugging really hard since I can't see exceptions or trace actions.
I'm basically stuck and unable to debug. Any ideas?
Thanks!
-Aaron

Hi Arun,
You are sure the details that you have configured for the portal are correct?
The Developer Studio that you are using is the sap SP level as EP?
There is no proxy server between you and the portal? Check your Dev studio settings via Window>Preferences>Workbench Proxy settings.
Cheers
Dan

Flash cs6 debugger won't stop on breakpoints - productivity killer bug

hey all
help me before i punch the screen out of frustration!!!
Flash cs6 says "Breakpoint not set; No executable code at..." and won't stop at the breakpoint although i checked everything (believe me i did). I also googled for answers.
This is a bug since it comes and goes randomly (mostly comes, rarly goes).
The actionscript side on my project is very large - so you may not be able to reproduce this yourself. (i suspect this is something to do with a lot of actionscript, memory stuff - like code completion problems).
Is there anyway to clear some kind of FLA metadata that might hold the debugging info?
thank you!!!

Hi Amy, thanks for showing concern. No, there were no such scenario with my SWF since I had created a new AIR type of project with Flash CS6 installed. I don't know how really we can explain this problem (debugging) with a newly installed software; but simply the debugger never worked with the installation, so I just removed and moved to MacOS where it was working at least.
I am not sure even if the Flash CS has some dependencies - if I consider its the issue with my PC (installation).

Flash CS6 Trial (Mac Lion) won't start up...

When I launch the program, the splash screen loads up to the point of "Loading Accelerators" and becomes unresponsive. I have to Force Quit the application and never get to use the software.
What can I do to identify and solve the issue?

I have the same issue (only intermittent) but I have a licensed install, no error on install. This started on my Mac OS 10.7.4 after recent update to Flash CS6. No problem on my PC. With tenacity I do sometimes get it to launch (takes over 60 seconds). No clue yet as to the issue.

I need help getting my Intuos5 to work with Flash CS6

Can someone give me some help with this? I can't find a single thing on Google that helps me.
I installed Adobe Flash CS6 recently and I have been using my Intuos5 Large for a long time now with Photoshop CS6. The thing is, with Photoshop, it took forever to get working properly. It turned out that I needed to use the 64-bit version because my 64-bit system and tablet drivers won't work with 32-bit Photoshop.
Concerning Flash, it's the same problems as Photoshop. It refuses to recognize my tablets functions such as pressure and tilt sensitivity. It also has an annoying lag or lack of response if I do small, quick strokes. I would switch Flash to 64-bit mode, but there isn't one. I can't find the little stroke-like icon in Flash to turn on sensitivity either. I'm really confused. I've tried it with Flash CS5.5 and it's the same thing.
That's my issue, and I have tried restarting the software and rebooting many times as well. There doesn't seem to be much for options. This all leads to it probably being a 64-bit and 32-bit compatability issue
I'm running Windows 7 with more than enough power to maintain Flash CS6. It is possible that I may need to update my tablet driver since I did for Photoshop CS6, but it was a pain in the *** getting Photoshop to work until I used 64-bit mode. I may need additional files to mod the software.
I would really appreciate the help so I can begin to learn animation. It's my passion. Thanks, in advance.
Here are my relevant specs:
System Information
Time of this report: 9/4/2012, 01:32:48
       Machine name: LAPPY_TOPPY
   Operating System: Windows 7 Home Premium 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.120503-2030)
           Language: English (Regional Setting: English)
System Manufacturer: TOSHIBA
       System Model: Satellite L675
               BIOS: Phoenix SecureCore Version 2.30
          Processor: Intel(R) Core(TM) i5 CPU       M 450 @ 2.40GHz (4 CPUs), ~2.4GHz
             Memory: 4096MB RAM
Available OS Memory: 3954MB RAM
          Page File: 2016MB used, 5890MB available
        Windows Dir: C:\windows
    DirectX Version: DirectX 11
DX Setup Parameters: Not found
   User DPI Setting: Using System DPI
System DPI Setting: 96 DPI (100 percent)
    DWM DPI Scaling: Disabled
     DxDiag Version: 6.01.7601.17514 64bit Unicode
Display Devices
          Card name: ATI Mobility Radeon HD 5650
       Manufacturer: ATI Technologies Inc.
          Chip type: ATI display adapter (0x68C1)
           DAC type: Internal DAC(400MHz)
         Device Key: Enum\PCI\VEN_1002&DEV_68C1&SUBSYS_FD001179&REV_00
     Display Memory: 2735 MB
   Dedicated Memory: 1014 MB
      Shared Memory: 1721 MB
       Current Mode: 1600 x 900 (32 bit) (60Hz)
       Monitor Name: Generic PnP Monitor
      Monitor Model: unknown
         Monitor Id: LGD01CA
        Native Mode: 1600 x 900(p) (60.080Hz)
        Output Type: Internal

If you are moving from an existing Mac to a new Mac the easiest thing to do is connect the two Macs via a Firewire cable and run the Migration assistant. If you are moving files from a Windows platform or you don't want to use the Migration assistant review this article.
http://docs.info.apple.com/article.html?artnum=300173

Issues with Creative Cloud/ Flash CS6

Hello, I've recently (Friday, March 15, 2013) restarted my subscription to Creative Cloud for Flash Pro CS6, but I haven't been able to open the application.
However, I've contacted tech support (by phone and chat), but I still couldn't get any luck.
What I've already tried (numerous times), but failed:
Uninstalling and reinstalling Flash though the app manager
Opening it through creative.adobe.com (still had the option for to "Try" it only)
Updating Flash CS6
Rebooting my PC
Rebooting internet connection
Opening Flash on another PC (still no luck)
No matter what I tried, it kept taking me to the page requesting a serial code, when I'm supposed to have a subscription. I've had previous subscriptions to Creative Cloud and never had this problem until now. What's really worse is, that the payment has already been posted and taken out of my card and yet I can't use what I paid for. It's an extremely unsavory feeling to pay $30.00 for something you can't even use. Sorry to sound blunt, but I could really use some help (or a refund) to resolve this issue. I'd also appreciate it if you could let me know if you're having a similar issue and/or know of a workaround to the problem!
Thank you and have a nice day!
Crystal

I've tried your suggestion, but unfortunately, I couldn't even get past the third step because I still wasn't able to open Flash, even when I did follow the first two steps. Just a thought: I have Photoshop Elements 9 installed, but I know that it's not part of CS, but could it possibly be something with PSE 9 interfering with the app manager? Though, I have had PSE 9, a trial of Illustrator CS5, and a subscription to CC for Flash CS6 installed on my computer once before, I had no problem whatsoever. But now I just have PSE 9 and (Flash CS6). I'm not sure if that has anything to do with the issue I'm having, but I just wanted to make sure.
Anyway, I really appreciate your help! Thank you!

My new Macbook air won't connect to my Vizio HDTV.

My new Macbook Air won't connect to my Vizio VO32LF HDTV. I bought a mini-displayport to HDMI cable to connect the two. When I connect the cable, and switch to the appropriate HDMI input on the TV, my Macbook Air screen will flash blue for a second, and then return to normal. The TV reports it's unable to find a signal. I use the HDTV as my primary monitor, so I'd really appreciate some help on getting the two to place nicely together!

Cp,
Thanks for the reply. However, it appears that the issue is not with the hotspot, but with the network settings in the MacBook Air as every other device I have (including non-Apple devices) will connect to the iPhone hotspot. Another symptom is that my MacBook Air can find my iMac (and other network devices) on my wireless network, but the iMac can't find the MacBook Air.
KDR

Time Capsule won't connect to anything

I was using my time capsule for about a year and never had an issue until I moved. Now that I'm in the new house, no devices will connect to it except my MacBook Pro. Hard wired LAN or over WIFI my smart TV won't connect neither will my PlayStation or my iPhones or iPad. Nothing. Again... My computer connects over WIFI but nothing else. And nothing works directly hooked up from the Time Capsule to any device via LAN cable.

TC needs a full factory reset when put in a new network.
It remembers far too much from the previous setup.
So.
The Factory Reset Gen1-4.
Unplug your TC. Hold in reset. and power the TC back on.. without releasing reset for about 10sec. When the status light flashes rapidly; release it.
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
Do do a new setup .. if the modem you have is cable pure type modem.. the TC must be in bridge.. you MUST turn off the cable modem for 20min for the MAC address capture to time out.. then power up the modem and power up the TC which is in DHCP + NAT mode.
If the modem is a router.. put the TC in bridge mode..
If you run into troubles give us more info.
what modem.. make and model and type.
What model is the TC.. A1xxx from the base.
What version firmware?

First BT keyboard, now BT mouse, won't connect

Yesterday my Apple BT keyboard wouldn't connect. Flashing green light on kb. Changed batteries, no difference. Deleted pairing. When creating new pairing, it sees the keyboard but can't receive the pairing code. I read the forum here, figured I wasn't alone and that there'd be a fix reported here shortly, and decided to be patient.
This morning my Apple BT mouse also won't connect. Deleted the existing pairing, but it won't connect to create a new one. Both mouse and keyboard are about 18mths old. It's not batteries or battery contacts - both are in good condition.
I'm running Apple Bluetooth Software Version: 1.6.0f2 on Mac OS X 10.4.2 (8C46)
Halp!

Hi Alan:
I had a similar problem (once) with my BT keyboard. I tried all the trouble shooting things but it got to the point where it gave me a code but then would not accept it. Here is what I tried (may or may not have 'fixed' the problem. I shut my computer down. I unplugged all USB devices (this is a workaround for a missing BT - not your issue). I walked away for awhile. I restarted, repaired the devices (the keyboard code was accepted, and the problem has not returned).
As I said, I have no idea why this worked - and I do not believe in magic!
I do not think both devices would be faulty - although anything is possible.
Barry

Flash CS6 won't connect

Similar Messages

Maybe you are looking for