Flash doesn't export everything.

I made a full animation in Flash (in several bits, but that's not impotrant I think) and was planning to string them together in After Effects.
When I exported it as an swf file, all the animations worked normally. However, when I put them in After Effects or when I exported to an .mov file, many of the animations within symbols didn't show up. I think it may be the second tier of symbol animations that aren't showing up
Does anyone know what is going on and how I can fix it?

Never mind, the mov files seemed to have fixed themselves when I exported them again.
But to answer your question; yes, I used several individual flash files and planned to compile them together.
The errors also occurred in the same place each time, but there were no flaws in the swf files when I looked at them by themselves (without importing to After Effects or anything)

Similar Messages

  • Exports from Keynote to Flash doesn't work

    I am trying to create an automatic slide show and export it as an .swf (or anything) to run on a web site and it doesn't work. For documentation of my tests go to: http://www.equalivote.com/abKeynoteExportTESTS.pdf

    Another thought: If you need it to be flash, could you export the slideshow to quicktime, then put the quicktime movie into a flash project? I'm not too familiar with flash but it seems like that would be worth a try.

  • Could work an animated flash bitmap image exported in html 5, in DPS ?

    I'm new in DPS, just started for a couple of weeks and I need to use a image in an animation.
    I created the animation in inDesign exported in .fla, used de toolkit js, load it in a container with web content overlay, and when I preview it with Adobe Content Viewer it doesn't work, it apears a blank screen. Neighter of animation from that stage won't work.
    To be very precise any animation works fine, when I test the html in a browser, the problem appears only in the content viewer.
    The animation is very simple: smal logo entering in the stage from the right, not very complex.
    I tried in flash with other images in a test file and loaded in inDesign, and still don't work. Other vector animation works well, no problem. I saw that if I have an image in library in flash and export a simple animation with a vector ball, won't work in indesign preview, with content viewer.
    My question is, Could work an animated flash bitmap image exported in html 5, in DPS ?  If so, what should I need to do ?
    Thank you in advance.

    Two possible solutions I was considering:
    1) In my index/first page, have all the swfs present (scaled to 1x1, behind something, or invisible) and have a preloader code on that first page... so all the content gets loaded before continuing onto the rest of the site.  That would certainly work in making the site run quick... but would mean a relatively lengthy wait at the start.  Luckily, unlike my current site, all the actual site content (aside from the header/nav interface) is HTML... so the bulk of the site's content is in the HTML pages, not as part of the Flash header... so it probably wouldn't be too horrific a wait.  However, it would be loading EIGHT of these swfs, since there are eight pages... so then maybe it would be....
    2) Have an swf that consists of just the 'draw up' of the interface, and it's idle state... then when each button is pressed, load a new swf to replace the main one, which has the specific page's animated title sequence, and ends with the code to load the html page.  So, each separate HTML page would have embedded into it only the main swf, and the title animation swf would be swapped in when a nav button is pressed.  Main issue here is each button press would envoke a preloader sequence (kind of tedious)... and unfortunately all the 'main interface' elements loaded in with the main swf would have to be loaded in again at the start of each animated title swf (although none of the draw up... just the loading of the interface and buttons).  For highspeed users, it should be okay, I guess....
    Thoughts or better ideas?

  • Flash content renders above everything else

    This is something that has been happening since even way before I upgraded to Safari 5. Every page that has any flash content renders the flash on top of everything else.
    Example: a site with a dropdown menu and a large content slider made with flash, the flash covers the dropdown menu making it impossible to click the links. Or heres an example that I have a screenshot of:
    http://img4.imageshack.us/img4/5820/flashk.png
    Here the flash covers only part of the content but its annoying especially on sites built with large flash areas. Is there a fix for this? This has been happening for as long as I can remember.

    Honestly I cannot find any other sites, I know there are many out there I just cant remember the name. Regardless this happens no matter what, for some reason my Safari renders Flash the top layer in ANY instance. I can try to explain another site I remember distinctly: The site had a header much like the Apple site here except that the menu was a CSS dropdown menu. Right below the menu was a sort of "headlines/highlights" section which spanned the full width of the webpage design and it was build purely with flash. Now, every time you hover over one of the menu items they drop down, right below the flash so I couldn't read the links or even click them because Flash was stacked on top.
    Another example I can think of is sites that use a javascript/jquery image viewer where you'd click a thumbnail and it would pop it up full size (like Gizmodo does with their galleries). Now if there is a banner ad on the side and I click an image it will come up full size but it doesn't cover the whole page like it should, it covers everything but the flash.

  • How to stop flash pro cs6 exporting guide layers

    Ive recently started using Flash cs6 having been using Flash 8 for a long time. When I export an image or image sequence from flash, it is exporting images with guide layers included, this is something which flash 8 never did and i can't get used to it and keep exporting long sequences with guide layers which is quite annoying. Is there a way I can change settings or something so this doesn't happen. any help appreciated

    yeah i get the idea of guide layers and how useful they are. just dont  want all my rough layers visible when i export an image from flash.. my point being you never had to hide guide layers before publishing on old versions of flash which i think makes more sense.. why would you ever want to see a guide layer on a published image?? anyway, i discovered this only happens when using actionscript 3.0 but not 2.0 so, ive gone back to 2.0

  • How do I export everything in My library, even purchased songs?

    Cause If I had to get another Mp3 i'm not sure if I want to get another iPod, so I would want to be able to export everything of mine into another folder or place so it can imported into another program for another mp3. Can anyone help me?

    Does the Store > Check For Available Downloads menu option on your computer's iTunes download them, or do they show in the Purchased link under Quicklinks on the right-hand side of the iTunes Store homepage (Purchased tab in the iTunes Store app if using an iOS device) for downloading ? If not then try the 'report a problem' page to contact iTunes Support : http://reportaproblem.apple.com
    If the report a problem page doesn't work then try contacting Support via this page : http://www.apple.com/support/itunes/ contact/- click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • Movie in Keynote doesn't export properly for QuickTime

    Hello all. I really hope someone can help with this. I've used the discussions before with great success so THANK YOU all for sharing your expertise.
    I've got a keynote presentation that for the most part exports perfectly on QuickTime. The only part that doesn't export right are the 2 videos I've got on the presentation. I set the timing with the inspectors for it to start automatically and even added a song to play along with the presentation. But when I export it, there is about an extra minute and 15 seconds added to the whole video and I've got the presentation timed perfectly with keynote and the song. I've got iWork '09 and QT 10.0. Not pro just player.
    I've played with the custom settings to no avail. Any way to get the videos to export exactly to their lengths?
    Cheers

    I don't know if this is the answer you're looking for but I'll share my experience. Like you, I have three videos in my presentation. Once I exported it as a QT movie, the delays that I built in with the Inspector to allow the movie to play before the next slide transition, played AFTER the video ran. I went back and just put in a 1.5 second delay in and the videos run fine. I'm guessing that QT sees the video and allows it to play and THEN looks at the Delay setting.
    Now if someone can just tell me how to get the audio soundtrack to shut down during my three videos but play during the rest of the presentation...

  • I have a black iphone 5 and my flash doesn't work it used to work every once in a while but stopped

    I have a black iphone 5 and my flash doesn't work it used to work every once in a while but stopped I went into the camera app and tried to see if it would flash when I took a picture but I saw it light very faintly and hasn't done lot up since. Should I get the led replaced?

    First, try bringing up Control Center by swiping up from the bottom of the home screen.  Turn on the flashlight by tapping the icon in the lower left.  Does the flashlight work?  If not, perhaps you have a hardware issue.
    If it works, check the top of the screen when you open the Camera app to make sure you have the flash on.

  • Can I import binary in Flash CS5 and export swf, without AS code likes "Embed" ?

    Can I import binary in Flash CS5 and export swf, without AS code likes "Embed" ?
    I know I can use AS code,likes "[Embed]" metadata to embed binary in swf. But , how can I do that in Flash CS5 ?

    Have a look at this: http://stackoverflow.com/questions/7816231/how-to-use-as3-to-load-binary-data-from-web-ser ver

  • How to export everything from dashboard(Interactive reporting)

    Hi I have question regarding exporting dashboard as pdf(selcted values as well as results section).Can someone help me how to write a java script code export everything from dashboard from inaeractive reporting.
    Thx

    I have same problem. How you solved the problem? Could you provide the instruction?
    I exported the Dump file without any problem, but when I tried to import it to different instance, I got this error message.
    ORA-39125: Worker unexpected fatal error in KUPW$WORKER.PUT_DDLS while calling DBMS_METADATA.CONVERT []
    ORA-06502: PL/SQL: numeric or value error
    LPX-00007: unexpected end-of-file encountered
    ORA-06512: at "SYS.DBMS_SYS_ERROR", line 95
    ORA-06512: at "SYS.KUPW$WORKER", line 6235
    ----- PL/SQL Call Stack -----
    object line object
    handle number name
    2DF0B4B4 14916 package body SYS.KUPW$WORKER
    2DF0B4B4 6300 package body SYS.KUPW$WORKER
    2DF0B4B4 12279 package body SYS.KUPW$WORKER
    2DF0B4B4 3279 package body SYS.KUPW$WORKER
    2DF0B4B4 6889 package body SYS.KUPW$WORKER
    2DF0B4B4 1262 package body SYS.KUPW$WORKER
    2EC3C9F8 2 anonymous block
    Job "SYSTEM"."SYS_IMPORT_SCHEMA_04" stopped due to fatal error at 13:24:12
    Here is my import parameters:
    impdp userid=SYSTEM/password@ORA88T directory=data_pump_dir DUMPFILE=FULL_V25P.DMP SCHEMAS=EDCS, EDCS_RPT, UPLV LOGFILE=ImpV25P.LOG TABLE_EXISTS_ACTION=APPEND EXCLUDE=STATISTICS
    Edited by: user9532474 on Jul 24, 2009 12:49 PM
    Edited by: user9532474 on Jul 24, 2009 12:52 PM

  • With an iPhone 5 is a way to handling backlight better. Flash doesn't do it.

    How can I handle backlighting in an iPhone 5 camera? The flash doesn't it and there is no way to use "spot metering".

    Camera+ is also a camera app. It has much better metering options than the built in app. Put your thumb and finger together on the screen while in camera mode then spread them appart. You'll get the icons for focus and exposure which can be moved around separately.
    Best of luck.

  • Flash Player (Web Export) showing wrong colors

    Cheers!
    Sometimes when I look at my exported galeries I'm not satisfied regarding the colors. Up to today I thought that this is based on my week skills in developing photos.
    But that seems to be wrong! Please helpt me with the following:
    I'm exporting via Web Module using a simple viewer template (which uses the adobe flash player to display images). Now I fire up that little web page in my browser (safari or firefox in my case) and compare what I see with what I see in lightroom (library module). I can notice a very severe difference in the color presentation. Next I start a second browser window and place it beside the one showing the flash player galery exported before. Within that browser window I call the image from the image folder within the exported web page and compare both. Hence! It does not look like the same.
    To illustrate that I shot the following a couple of minutes ago:
    http://minolta.karlos.at/test.png
    On the left you see the lightroom web galery (simple viewer) and on the right the jpeg picture itself. (You can try that by starting the web galery and then click on the photo and launch it with the command "open picture in new window"
    Weird!
    Is that behaviour known and is there any solution to avoid this wrong color display?
    Thanks!
    C.

    Flash is not color managed (although in the latest version you can somehow turn it on I understand) so it will never show the right color ever. That said, if you have a good display but not so good it has a wide gamut, and you calibrate correctly at gamma 2.2, you should see very similar color. The problem on Macs that have not been calibrated is that the default gamma is wrong (even Apple says this) and they have to be calibrated to be right. Normally Safari color manages so the gamma of most images gets automaticaly corrected, but it cannot color manage flash.
    That said, from your screenshot it appears the difference is entirely due to the difference in gamut between your display and sRGB. There is nothing you can do about it but pester Adobe to enable color management for the latest flash versions in the Lightroom flash galleries. Of course nobody that looks at your gallery will actually see the right color anyway as basically nobody calibrates their screen and most people do not even use color managed browsers.

  • Lightroom 5 doesn't export with a maximum long edge as instructed

    What is going on with Lightroom 5?  I upgraded from 4 and now it doesn't export with a maximum long edge of 2166 pixels even though that is what it is being told to do.

    Hi Jim,
    It fails to shorten to the maximum long edge requested, leaving longer-edged files in the exported folder.
    Never had this problem with Lightroom4.  Just upgraded to 5.  My operating system is Windows Pro 8.
    Thank you for your time.
    Gary
    Gary Lloyd McCullough
    www.GaryLloydMcCullough.com
    (904) 687-9690 text and voice

  • Adobe flash doesn't open some videos.  It did work prior to software update.  It has to do with settings - but what?          Has to do with setting.  Set to what?

    Adobe Flash doesn't open some videos.  It did work prior to software update.  It has to do with settings - but I don't know which or what?      

    Start here.
    http://kb2.adobe.com/cps/865/cpsid_86551.html#ostype=m,

  • Adobe Flash doesn't stop downloading content if told to do so

    Couldn't reply to this: [http://example.com https://support.mozilla.com/tiki-view_forum_thread.php?locale=en-US&comments_parentId=369682&forumId=1#threadId738381], but have the same problem.
    Adobe Flash doesn't stop downloading a once started embedded video if you close the tab/firefox or right click on the embedded flash content and choose Stop Download.
    Only workaround for me so far is to go into my Windows Firewall Advanced Settings and then there opening the Windows Firewall Properties Dialog and '''blocking Outbound Connections in the Private Profile tab''' to stop the flash plugin.

    Hi iris99 ,
    For win 7 64 bit  or win 8.1 64 bit - please download this driver
    - http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-141892-1&cc=us&dlc=en&lc=en...
    Regards,
    PraTH_KR
    Although I am an HP employee, I am speaking for myself and not for HP.
    **Click on “Kudos” Star if you think this reply helped** Or Mark it as "Solved" if issue got fixed.

Maybe you are looking for